fp 16 used for sale

This 5-axis FPT STINGER XL CNC milling machine was manufactured in 2008. Ideal for complex and precise milling tasks, it offers advanced capabilities for a variety of applications. Consider the opportunity to buy this FPT STINGER XL CNC milling machine. Contact us for more information about this machine.

This FPT DINO was manufactured in 2002. It features a Siemens 840D CNC, a table size of 1200x3000 mm, and travels of X2700, Y2200, Z800 mm. Equipped with a 5-axis continuous head with an electrospindle reaching 18,000 RPM and an 18-position tool changer. Consider the opportunity to buy this FPT DINO universal machining centre. Contact us for more information.

x-travel: 14.000 mm y-travel: 1.500 mm z-travel: 3.000 mm Control: Heidenhain Itnc 530 total power requirement: 50 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1110049 Type of machine CNC floortype milling machine Make FPT Type Spirit 130 Build in 2012 Type of control HEIDENHAIN TNC Itnc 530 X-stroke (mm) 14.000 Y-stroke (mm) 1.500 Z-stroke (mm) 3.000 Speeds (Rpm) max. 4.000 Admission in spindlehead Iso 50 Rapid feeds max 25.000 mm/min Additional information Program run 9655 hour The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FPZ ABB motor: 3 kW Condition: after renovation

FPZ Effepizeta Motor: 5.5 kW Condition: after renovation

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: FPU, rotating center point -Type: 8811-5 -Recording: MK5 -Dimensions: Ø 84 x 226 mm -Weight: 3.5 kg

Technical data of the FPT Pragma M40 mobile column milling machine used: Longitudinal travel: 4000 mm Vertical travel: 1600 mm Transversal travel: 1200 mm Working feeds: 0-15000 mm/min Fast feed: 30000 mm/min Maximum thrust on axes (X,Y,Z): 2000 from N Spindle motor power (continuous service S1): 28 kW 38 hp Spindle motor power (intermittent service S6-60%): 35 kW 47,6 hp Constant torque spindle speed range: 0-312.5 g/min Spindle speed range at constant power. 312.5-5000 rpm Maximum spindle torque (continuous service S1): 856 Nm Maximum spindle torque (intermittent service S6-60%): 1070 Nm Supply voltage: 50Hz Current consumption: 119,2A Total installed power: 65 kW 88,4hp

Ref. -No.: 10347 Manufacturer: FPT Year of construction: 2006 Type of control: CNC Control: Heidenhain 530 Country of origin: Italien X-Travel: 12000 mm Y-Travel: 3500 mm Z-Travel: 1500 mm Tool Piece Magazine With: 80 Pcs./pcs. Spindle Speed: 3000 RPM Drive Capacity - Spindle Motor: 37 kW Round table 1 (lxw): 2500x2500 mm Round Table 1 - V: 2000 mm Rotary table 1 max. load: 30000 kg Round table 2 (lxw): 2500x2500 mm Round Table 2 - V: 1500 mm Rotary table 2 max. load: 30000 kg Further information:

Ref. -No.: 10350 Manufacturer: FPT Year of construction: 2012 Type of control: CNC Control: Heidenhain 530 Storage location: Halberstadt Country of origin: Italien X-Travel: 14000 mm Y-Travel: 5000 mm Z-Travel: 1500 mm W-Axis: 1000 mm Numbers Of Tools In Magazin: 24 Drive Capacity - Spindle Motor: 60 kW Rotary table diameter: 3000x3000 mm Rotary table travel V: 2500 mm Rotary table max. Load: 80000 kg swivel angle: 180 ° Further information: +3D M Sensor +CNC controlled angle head: micro

Key data: 14000 mm, 1500 mm, 3000 mm

Stock number 1110049 Machine Type: CNC Long Bed Milling Machine Make FPT Type Spirit 130 Year of construction 2012 Control type HEIDENHAIN TNC Itnc 530 X-off (mm) 14,000 Y-displacement (mm) 1,500 Z-off (mm) 3,000 Speeds of (rpm) max. 4,000 Tool holder Iso 50 Rapid traverse max 25,000 mm/min Tool changer for 60 tools in really top condition and the machines can be demonstrated under power Information: CNC Control One 29,766 hours Program leach 9655 hours

x-travel: 1.750 mm y-travel: 1.400 mm z-travel: 550 mm Control: SIEMENS Sinumerik 840D sl Working area: : surface area: 1.000 x Ø1.200 mm max. workpiece weight: kg Feeds: : X-, Y- and Z-axis, stepless: mm/min rapid travel x/y/z: mm/min : : Constant Power at 100 % ED: 18 kW torque: 80 Nm turning speeds: 18.000 U/min : +/185° Direct Drive tool taper: HSK A63 tool changer: 60 fach dimensions of the machine ca.: 6,2 x 3,8 x 4,3 m total power requirement: 50 kW weight of the machine ca.: 20 t Equipment and accessories • Compact portal milling machine STINGER180 - Installation without contoured foundation • CNC control Siemens SINUMERIK 840D solution line • TULCE HSK-63A head with integrated, direct-driven A-axis • Stepless and endlessly rotatable milling table Ø1,200x1,000mm • Omlat spindle, max. speed 18,000 min-1 • Axis drives via precision ball screws and digital servo ...

FPT SIRIO-M Control: Heidenhain TNC 426 C Serial Number: LM0498020 Machine number: 1710799 CNC milling head automatically swivelling infinitely variable Spindle: ISO 50, 50 kW, up to 3000 rpm Hydrostatic Guides Travel (X/Y/Z): 4000 / 1200 / 2000 mm Table size: 5000 x 2000 mm Tool changer: 30-fold ATC (automatic)

Key data: 4000 mm, 2500 mm, 1300 mm

VERY RARE – A USED MACHINE OF THIS TYPE IS HARDLY AVAILABLE ON THE MARKET We are pleased to offer you the following high-performance machine: This machine combines precision, performance and flexibility – ideal for demanding pattern and mould making as well as for high-performance aluminium machining. Due to its latest technology, specification, very good condition and year of manufacture, it represents an exceptionally rare opportunity on the second-hand market. 5-Axis CNC Gantry Milling Machine FPT Dinospin Year of construction 2019 Heidenhain TNC 640 Controller Table size 4,000 x 2,500 mm Table load max. 10 t/m² 2-axis NC swivel milling head C-axis +/- 270° A-axis +/- 185° Head torque (working/braking torque) 450 / 1400 Nm Travels: X 4,000 mm Y 2,500 mm Z 1,300 mm Feeds X/Y/Z up to 40,000 mm/min Feeds C/A up to 30 rpm Spindle drive power 22 ...

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: FPZ effepizeta, side channel blower side channel compressor -Type: SCL 70 SH -Drive shaft: Ø 35 x 90 mm -Bolt circle: Ø 160 x 10 mm -Drive motor: can be supplied at an additional cost -Dimensions total: 545/520/H565 mm -Weight: 37 kg

Key data: 4 mm, 3 mm, 1 mm

5-axis CNC gantry milling machine FPT Dinospin Year of construction 2022 Heidenhain TNC 640 Controller Table size 4,000 x 2,500 mm Gantry longitudinal travel X 4,000 mm Cross path Y 2,500 mm Perpendicular travel Z 1,300 mm Feed and rapid traverse speed X,Y,Z 40,000 mm/min 2-axis NC swivel milling head C-axis +/- 270° A-axis +/- 185° Spindle drive power 22/33 kW Speed range 10 ~ 18,000 rpm Tool holder HSK-A63 120-fold tool changer Electronic handwheel with radio control Manual clamping of the milling head on the machine ram Direct tapping Dynamic RTCP (head programming without shifting the zero points) Automatic calibration system AUTOCAL Sensor for detecting abnormal vibrations Tool measurement and tool breakage detection using laser Workpiece probes Internal cooling 40 bar External cooling 10 bar Coolant gun Operating mo ...

x-travel: 2800 mm y-travel: 2200 mm z-travel: 800 mm Control: Heidenhain iTNC 530 table surface area: 3000 x 1200 mm tool taper: HSK-A-63 spindle turning speed range: 12000 U/min power capacity: 18 kW feed range: 35000 mm/min total power requirement: 68,7 kW weight of the machine ca.: t dimensions of the machine ca.: 12,4 x 3,5 x 4,6 m The FPT DINO is a 5-axis portal milling machine designed for the precise machining of large components. With a cross travel of 2200 mm and a high-speed spindle with 12,000 rpm, this machine combines high machining volume with outstanding dynamics in finishing. Heidenhain iTNC 530 CNC path control Number of controlled axes (simultaneously): X/Y/Z/C/B Travels: X-axis (longitudinal travel) 2800 mm Y-axis (cross travel) 2200 mm Z-axis (vertical travel) 800 mm Machine length: 12,434 mm Machine width: 3,597 mm Machine height: 4,622 mm Coolant equipment (no cool ...

x-travel: 24000 mm y-travel: 3000 mm z-travel: 1250 mm spindle turning speed - stepless: 4000 U/min spindle taper ISO: 50 spindle motor: 37 kW feeds longditudinal/cross/vertical: 6000 mm/min rapid motion -longitudinal/cross/vertical: 15 m/min no. of tools in the magazine: 60 Stück control: HEIDENHAIN TNC 426 M total power requirement: - kW weight of the machine ca.: - t - CNC control HEIDENHAIN TNC 426 M - Automatic head 360° x 144 positions. - ISO 50 - Spindle extension L600 - ATC 60 positions - Spindle cooling (internal) 20 bar - Workpiece probe - Chip conveyor - Hydrostatic in x/y/z/a - Rigid tapping - preparation for horizontal Head There are no tables The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working Area: 6000 x 1200 x 3000 (Max Stroke) Max working feed: 8000 mm/min Max rapid feed: 15000 mm/min Fixings: ▪ Indexed head : max rpm: 4000 ▪ Nose: max rpm: 4000 Control: Selca 3045

x-travel: 6000 mm y-travel: 1200 mm z-travel: 2000 mm a-axis: 144 x 2,5 ° c-axis: 144 x 2,5 ° spindle turning speed - stepless: 187 - 4000 U/min spindle taper ISO: 50 spindle motor: 27 kW max. torque on the spindle: 1400 Nm feeds longditudinal/cross/vertical: 6000 mm/min rapid motion -longitudinal/cross/vertical: 15 m/min no. of tools in the magazine: 40 Stück control: HEIDENHAIN TNC 426 M total power requirement: 56,9 kW weight of the machine ca.: 27 t dimensions of the machine ca.: - m - CNC control HEIDENHAIN TNC 426 M - ATC for 40 tools (BT 50) - Indexable 2-axis milling head with 144 x 2.5° each - Internal coolant supply - Floor Plate 3500 x 2500mm - NC rotary table 1500 x 1500mm - Chip conveyor - Renishaw - Hydrostatics in x/y/z - Ball screws in x/y/z Coordinates - X=longitudinal / Y=transverse / Z=vertical The data for this ad was created with ModulMWS - the software solutio ...

- Chip conveyor - Laser tool setter - Portal Handwheel - Full A/B-Automatic head - High pressure coolant

- Head Pick up Station - CNC Indexing Micro Head 0.001 Gr - Spindle extionsion - Internal coolant system - ATC Chain Tool changer 60 Positions - Under power

x-travel: 4000 mm y-travel: 2500 mm z-travel: 1300 mm Control: Heidenhain TNC 640 table-size: 4000 x 2500 mm table load: 10 t/m² spindle turning speed range: 18000 U/min tool taper: HSK A 63 feed: 40.000 mm/min spindle motor: 33 kW A-Axis: +/- 185 ° c-axis: +/- 270 ° distance between columns: - mm Passage height: - mm total power requirement: - kW weight of the machine ca.: 44,5 t dimensions of the machine ca.: - m Equipped with: - Heidenhain TNC 640 CNC control - Tupce universal milling head (2 axes) for 5-axis machining - 80-position tool changer (HSK A63) - Coolant system - CE mark - Enclosure - Measuring head for workpiece measurement The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Travel path X/Y/Z: 1670mm/800mm/900mm, Speed: 4000rpm, Tool positions: 16, Tool holder: SK40, Table dimensions X/Y: 2000mm/900mm, Weight: approx. 4500kg, Operating hours: approx. 9680h. According to the error message, the standstill monitoring of the Z-axis is defective. Documentation available. An on-site inspection is possible.

x-travel: 6000 mm y-travel: 2500 mm z-travel: 1500 mm spindle turning speed - stepless: 5000 U/min spindle motor: 42 kW feeds longditudinal/cross/vertical: 15000 mm/min rapid motion -longitudinal/cross/vertical: 35 m/min no. of tools in the magazine: 60 Stück control: HEIDENHAIN TNC 640 total power requirement: ca 90 kW weight of the machine ca.: 73,5 t - CNC Control Heidenhain TNC 640 - Rotary-translating table 2000 × 2500 mm, load capacity 30,000 kg - Worktable 2500 × 2500 mm, - tool magazine, 60 tools, ISO 50 - Laser tool integrity probe - workpiece alignment measuring probe - Coolant system - Chip conveyor - Anchoring and leveling equipment for X axis 6000 mm - Vibration detection sensor - Double cradle for loading/unloading two milling heads, with dedicated software. - Automatic head clamping system for mechanical heads + electrospindle heads - Universal head with thousandth-degr ...

x-travel: 6000 mm y-travel: 2000 mm z-travel: 1250 mm spindle turning speed - stepless: 5000 U/min spindle motor: 34 kW feeds longditudinal/cross/vertical: 15000 mm/min rapid motion -longitudinal/cross/vertical: 35 m/min no. of tools in the magazine: 40 Stück control: HEIDENHAIN TNC 530 total power requirement: 60 kW weight of the machine ca.: - t - CNC Control Heidenhain TNC 530 - Rigid tapping for mechanical heads, - AUTOCAL software for automatic calibration - 3D workpiece alignment measuring probe. - Semi-automatic accessory change - Hydrostatic rotary-translating table TRT15, size: 2000 × 2000 mm, 15t, V-Axis 1500mm - Universal bi-rotary head with thousandth-degree positioning Taper: BT 50 - Double cradle for loading/unloading two milling heads, with dedicated management software - Chain-type tool magazine, 40 positions, ISO 50 - High-pressure coolant system, external/internal thr ...

GE Äkta Purifier 10 FPLC System Box 900 P 900 Pump /10 ml pump heads UPC 900 Monitor INV 907 Valve M925 Mixer / 6 ml mixing chamber Conductivity Flow Cell pH Sample CU 950 Interface/Communication Module FRAC 920 Fraction Collector Unicorn Software

Deckel FP2LB Universal Milling Machine Type: Universal milling machine Manufacturer: Deckel Model: FP2LB Year of manufacture: 1977 X-axis travel: 800 mm Y-axis travel: 300 mm Z-axis travel: 400 mm Approx. dimensions (L x W x H): 1750 x 1700 x 1750 mm Includes various accessories and documentation Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-21

Deckel FP3LB Universal Milling Machine Type: Universal milling machine Manufacturer: Deckel Model: FP3LB Serial number: 0554 X-axis travel: 500 mm Y-axis travel: 300 mm Z-axis travel: 400 mm T-slot table size: 300 x 1000 mm Taper: SK40 Speed range: up to 2000 rpm Engine power: 4 kW Machine weight: approx. 1100 kg Dimensions (L x W x H): 2000 x 1200 x 1800 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-18

Deckel FP2 Milling Machine Component Type: Milling machine component Manufacturer: Deckel Model: FP2 Length: approx. 100 cm Height: approx. 31 cm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-59

Deckel FP33 Universal Milling Machine Type: Universal milling machine Manufacturer: Deckel Model: FP33 T-slot table size: 430 x 1000 mm Approx. dimensions (L x W x H): 2150 x 1800 x 2200 mm 5 horizontal T-slots 2 vertical T-slots Tension clamp: 90 x 90 mm x 4 T-slot width: 20 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-25

FPA water tanks are equipped as standard with: - Inlet opening with a diameter of 32.5 cm, closed with a steel cover with a rubber gasket - Baffles to prevent water from splashing during transport - Runoff stump - FPA tanks: they are made of steel and galvanized according to EN 1461. Auction-ID: 04M-431-1

5x 1500l FPA water tanks are equipped as standard with: - Inlet opening with a diameter of 32.5 cm, closed with a steel cover with a rubber gasket - Baffles to prevent water from splashing during transport - Runoff stump - FPA tanks: they are made of steel and galvanized according to EN 1461. Auction-ID: 04M-46Y-1

SRE Maxi Function: Punching, creasing, cutting (longitudinal/crosswise), printing and folding in one operation Material: Single, double and triple corrugated cardboard Material thickness: from approx. 2 mm to 16 mm thickness Working width: 2,500 mm Working length: 10,000 mm Various additional tools available FPU Printers Roller circumference: 2,500 mm Printing: 1-color flexographic printing Lift table front Roller conveyors in the middle and rear

The model Pro-face 3580406-01 (FP3710-T41 series) is an industrial 15-inch TFT color monitor with touchscreen. It belongs to the FP3000 series and serves as a display and control unit for industrial PCs or programmable logic controllers (PLC).

Condition: Good Model : HFW-160 T5 STD Brand: Himoinsa Power : 127,4 KW /159 KVA Engine: Iveco FPT 6 cylinder turbo diesel. Year of Make: 2014 RPM : 1500 U/Min. Frequency : 50 Hz Voltage : 230/400 volts Auction-ID: A1-46031-9

\" Permanent magnetic clamping plate with longitudinal pole pitch. Designed for clamping ferromagnetic workpieces, e.g. for grinding or light milling work. Product: Permanent magnetic clamping plate Manufacturer: SAV Type: 243.01-300 × 150 FP1-100 Dimensions (approx.): • Clamping surface: 300 × 150 mm • Height: approx. 52 mm \" Auction-ID: A7-46417-167

Manure spreader Brand: the campaign Model: FPB 10 L Year 1998 - 4 vertical hedgehogs - Heavy-duty chain - 2 fixed axles leaf suspension - Wheels 560/60R22.5 50% - Leaf drawbar suspension - Cab unloading gearbox - Hydraulic door ! 3 of the 4 hedgehog gearboxes have small cracks, does not prevent the operation of the machine in any way but, slight oil losses Machine in very good general condition + papers present. Auction-ID: A3-43524-33401

Auction-ID: A1-45737-143

3400PSI; rated flow 2.6GPM; 212cc; 2.6GPM; 7548 Auction-ID: A1-45902-405

3400PSI; rated flow 2.6GPM; 212cc; 2.6GPM; 7548 Auction-ID: A1-45902-404

The Spühl FPC 100 (or a similar model, the FPC 105) machine is designed for producing pocket springs, commonly used in mattresses. Here are its key specifications: - Spring Type and Dimensions: It can handle both barrel and cylindrical type springs. The outer waist diameter of springs ranges from 40 to 75 mm, with a spring height after setting of 100 to 270 mm. The pocket height can be between 70 to 230 mm. - Spring Wire Gauge: The machine is compatible with a spring wire gauge of 1.3 to 2.2 mm. - Performance and Consumption: The machine can produce up to 100 springs per minute, depending on spring dimensions. It consumes approximately 6.5 m³ of air per hour at 6 bar, with a total power consumption of around 13 kVA. - Power Requirements: The machine operates on a voltage of 3 x 400 V or 3 x 220 V, with an input fuse of 100 A. Other voltages can be accommodated on request. It is compat ...

CNC portal milling machine Droop & Rein FP160/2 – technically perfect, dismantled Description: For sale is a Droop & Rein FP160/2 CNC portal milling machine, built in 1965, completely overhauled and converted to CNC by the Rottler company in 2003 (investment at the time: €750,000). The machine is equipped with a Heidenhain TNC 430 control system and a Heidenhain LB 382 C length measuring system and guarantees a high precision of ±0.005 mm. All components are technically flawless. The machine is currently dismantled and disassembled in our warehouse in Riesa, Germany, so that assembly, assembly and adjustment are required before commissioning. A viewing of the individual parts is possible. Technical data: Manufacturer: Droop & Rein Type: FP160/2 Item no.: 2698 Year of construction: 1965 (CNC conversion 2003) Control: Heidenhain TNC 430 Length measuring  ...

Producer: INJECT STAR Type: FPW 17 Internal dimensions: Length 1620 x width 560 x height 1480 mm External dimensions: Lenght 1000 x width 500 x height 1050 mm 1 piece - not complet. Used pneumatic meat press for meat and bacon INJECT-STAR type FPW 17 with the possibility of the time setting and the automatic program - Air consumption approx. 7 bar Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

PAL FP8 Rotary filler Serial: FP8MC00016 2016, The FP8 is a compact rotary filling and closing machine. Whilst fully automatic in its operation this is a simple and flexible machine to use. It can seal a pre-cut or reel fed lid to a pre-formed pot with production speeds of up to 55 pots per minute, depending on the product consistency and fill volume. Product changeovers are quick and easy due to light, simple to change table quadrants and pre-set recipes in the HMI screen.

PAL FP8 Rotary filler Serial: FP8MC00024 2017, The FP8 is a compact rotary filling and closing machine. Whilst fully automatic in its operation this is a simple and flexible machine to use. It can seal a pre-cut or reel fed lid to a pre-formed pot with production speeds of up to 55 pots per minute, depending on the product consistency and fill volume. Product changeovers are quick and easy due to light, simple to change table quadrants and pre-set recipes in the HMI screen.

Dormatec AirBench FPW209084P Premium The FPW extraction table is suitable for all types of contamination (metal, plastic, stone, wood, glue steam, etc.) thanks to a variety of filters. Dust, steam or smoke no longer get into the respiratory tract because they are immediately sucked out through the worktop. The downdraft tables are available in different sizes and configurations. All you need is a power outlet, plug and play! Structure of the FPW extraction table: - Industrial design - Robust welded filter housing made of 2 mm sheet steel - Steel surface made of 3 mm sheet steel - perforated slide. 4 mm - Powder coating in RAL 7035 (light grey) Features of the premium model: - Filters: Labyrinth & H14 HEPA (The filter type and technical design depend on the materials to be processed. The extraction table can be equipped according to all common requirements.) - Increased ...

Engine Brand: FPT, Condition: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: White , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: No Starter Present , Rated Power: 331 Kw, Rated Speed: 3000 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/fpt-f4he0686a-used/318, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: F4HE0686AE; Transport weight [kg]: 600

Key data: 990 mm, 390 mm, 590 mm

For sale is a robust and powerful universal milling machine of the brand DECKEL, type FP33. The machine impresses with its high stability, generous travel distances and SK50 tool holder – ideal for workshops, maintenance or manufacturing companies with high requirements. Technical data: Manufacturer: DECKEL Type: FP33 Tool holder: SK 50 Travels:  • X = 990 mm  • Y = 390 mm  • Z = 590 mm Table size (L x W): 1200 mm x 1000 mm Spindle speed: 31.5 – 1600 rpm Motor power: 5.5 kW Machine weight: approx. 4,500 kg Dimensions (L x W x H): 3300 x 2500 x 2000 mm ⚙️ Condition & Notes: Good general condition (more details on request) Delivery: Loading on truck possible Viewing possible by appointment

This DECKEL FP4A was manufactured in 1994. A vertical machining centre featuring a travel range of X=565mm, Y=505mm, Z=400mm, SK40 tool holder, and a spindle speed of up to 4000 rpm. Consider the opportunity to buy this DECKEL FP4A vertical machining centre. Contact us for more information.

MIWE electric 5 stoves 1.20m wide; 1.60m deep with FP8 control and 1 pull-out stove Number of stoves: 5 Stove size: 120 x 160cm Pull-out stove: 1 Baking surface: 9.6sqm Heating type: electric Clear Stove Height: 170mm Clear Stove Height: 220mm Top Stove Hearth doors: stainless steel with viewing window Installation Page: Left Control: FP8 Water meter: yes Mounting height: 2330mm Width: 1600mm Depth: 2400mm Total connected load: 65,750KW