fp 16 used for sale

This 3-axis Johnford VMC-1600S was manufactured in 2014. It features a longitudinal travel of 1600 mm, cross travel of 1100 mm, and vertical travel of 800 mm. The machine has a robust table working surface of 1800 x 1000 mm and a maximum table load capacity of 4600 kg. If you are looking to get high-quality milling capabilities, consider the Johnford VMC-1600S vertical machining centre we have for sale. Contact us for further details.

This 3-axis BURMEK SPL 160.2 was manufactured in 1996. It features a maximum workpiece length of 13,000 mm, a maximum workpiece height of 180 mm, and a maximum workpiece width of 250 mm. With a robust machine weight of approximately 3,900 kg, it is designed for durability. If you are looking to get high-quality woodworking capabilities, consider the BURMEK SPL 160.2 machine we have for sale. Contact us for further details.

Offer 26015 Technical data: - Max. pressing force approx. 160 t - Max. ram stroke approx. 300 mm - Double-acting cylinder with hydraulic return - Max. retraction force 110 T - Stand width approx. 1540 mm - Table width 1500 mm - Table depth 1000 mm - Table height 590 mm - Max. installation height approx. 850 mm - Drive 400 V / 11 kW - Space requirement with unit approx. W 2350 x H 2200 x D 1750 mm - Weight approx. 3500 kg

Key data: 16000 , 8825 , 140

Presse à injecter HAITIAN 1600 T type MARS MA 16000/15800 Force de fermeture : 16 000 KN Année : 2011 Course d’ouverture moule : 1600 mm Epaisseur moule min / max : 700 / 1500 mm Course d’ouverture max des plateaux. : 3100 mm Distance entre colonnes : 1550 x 1430 mm Dimensions des plateaux : 2230 x 2120 mm Course d’éjection : 400 mm Force d’éjection : 318 KN Diamètre vis : 150 mm Volume théorique d'injection: 11 133 cm3 Poids de l’injection en PS : 10 131 gr Rapport L/D : 20,8 Pression d’injection max. : 149 MPA Capacité de plastification : 220 gr/sec Vitesse d’injection : 1527 gr/sec Vitesse rotation vis : 102 tour/min Puissance chauffe. : 122 KW Puissance moteur électrique: 65 + 65 + 45 Quantité d’huile dans réservoir : 1610 litres Dimensions : 15,2 x 4,5 x 4,5 m Poids total : 107 T

: neu : ca. 10 Wochen ab Auftrags : Spanien : 72800 € : 1375.92 € : 165 to : 610 mm : 5 : 40/30 bzw. 34/34 mm : 110 mm : 31 1/min : 750x20 / 400x30 mm : 205x205x18 mm : 60 mm : 16x58x110 mm : 15 kW : 2950 mm : 1600 mm : 2200 mm : 6300 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear angle bar shear with minimum deformation by diagonal moving of the blade round and square bar shear rectangular notching unit punching unit up to diam. 40 mm fast hydraulic, centring device oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear user manual in GERMAN and ENGLISH (sample photos) OPTION ",KIT", € 970,-- length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm Furt ...

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SDMO X2200C, Power (KVA): 2200, Working hours: 23

Mechanical stamping press manufactured in 2004. This AIDA NC2-1600(2) features a pressing force of 160 tons and a slide stroke of 200 mm. It has a slide area of 1500 x 580 mm and a bolster area of 2040 x 760 mm. If you are looking to get high-quality stamping capabilities, consider the AIDA NC2-1600(2) machine we have for sale. Contact us for further details.

An old Colchester engine lathe is available. Center height: 216mm, swing diameter over bed/cross slide/in gap: 432mm/267mm/711mm, distance between centers: 2000mm, spindle bore: 76mm, speed: 1600rpm, bed width: 343mm. Machine dimensions X/Y/Z: approx. 3200mm/1100mm/1400mm, weight: approx. 2500kg. An on-site inspection is possible.

General SKU050C445 Mounted on framecheck Pressure Working pressure0.0005 Bar Main Features Volume160000 Ltr. Motor7.5 KW Specified Features - Vacuum pump Capacity160 m3/Hr With motor7,5 KW, 400 Volt (Ex) Information LocationBarneveld Floorspace1,4x1,1 M Total height2,1 M ATEX compatiblecheck Technical specs Extra information0,5 mbar Enddruck (abs)Vacuum pumpsDiscountRietschlePumps > Vacuum pumpsDiscountBrand > Rietschle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU050C446 Mounted on framecheck Pressure Working pressure0.0005 Bar Main Features Volume160000 Ltr. Motor6.8 KW Specified Features - Vacuum pump Capacity160 m3/Hr With motor6,8 KW, 400 Volt (Ex) Information LocationBarneveld Floorspace1,5x1,4 M Total height1,8 M Weight1150 KG ATEX compatiblecheck Technical specs Extra information0,5 mbar Enddruck (abs)Vacuum pumpsDiscountRietschlePumps > Vacuum pumpsDiscountBrand > Rietschle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

- Work load 6300 Kg - Cross rail adjustment 660 mm - Feed rate cross rail 0 - 400 mm/Min - Feed rate 0 - 3000 mm/Min - Rapid feed 0 - 8000 mm/Min - Central lubrication - Chip conveyor - RAM with Sandvik COROMONT C8 - Tooling C8 with double connector - Ca 10 units CAPTO Tool system - 4 extra heavy duty jaws

SPINDLE MOULDER with tilting spindle model SCM T160 L’Invincibile spindle tilting by electric -5 ° / + 45 ° spindle lifting by electric motor power Hp 5,5 shaft diameter mm. 50 volt. 380/50 weight kg. 1000 AND OTHER MACHINES

: neu : ca. 6 Monate ab Auftragse : Taiwan : 39200 € : 748.72 € : 50 mm : MK 5 : 350 - 1.600 mm : 56 - 1.450 (12) U/min : Stahl/Guß: M40/M50 : 2670 mm : 1120 mm : 2410 mm : 3300 kg : 465 - 1.420 mm : 0,06 - 0,2 (3) mm/min : 3.7 kW : 320 mm : 270 mm : 2.550 x 970 x 200 mm : 1,5 kW : 630 x 500 x 500 mm : 2760 mm : 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25351 Technical data: - Width approx. 1250 mm - Height approx. 1600 mm - Depth approx. 1000 mm - Plate thickness T – groove side approx. 90 mm - 8 T-slots L 1250 mm - Center distance of the T-slots 200 mm each - Distance from the outside 100 mm - T – groove width approx. 35 / 60 mm - T – groove depth approx. 28 / 32 mm - Weight approx. 1400 kg

Ref. no.: 18657 Hersteller: ENGEL Year of construction: 2016 Clamping unit Clamping force: 160 ton Opening stroke: 900 mm Mould height min.: 300 mm Mould height max.: 600 mm Platen size (h x v): 750 X 750 mm Injection unit Screw diameter: 35 mm Injection volume: 168 cm³ Shot weight: 151 g Injection pressure: 2400 bar Measurements and weight Dimensions: 5,7 X 1,8 X 2,2 m Machine weight: 10200 kg Further information: Tie-bar-less + electric injection = maximum flexibility and precision ENGEL e-victory 440/160: This is a hybrid machine (servo-hydraulic + electric) ⸻ How it works ✔ Electric part: Injection unit (screw movement) Ensures very high precision and process stability ✔ Hydraulic part: Clamping unit (mould closing) Maintains clamping force efficiently without continuous energy consumption This system combines: The precision of an all-electric machine With the power a ...

: gebraucht : 2001 : 010191 : prompt, Zwischenverkauf v : Deutschland : 24500 € : 1 : 320 mm : 650 mm : 160 mm : 40 mm : 192 mm : 205 mm : 5 : 5 MK : 16 : 48 - 2500 1/min : 24 : 0.02 - 0.63 mm/U : 0.006 - 0.2 mm/U : 0.25 - 8 mm : 80 - 2 Gänge/ : 0.2 - 4 : 200 - 5 : 150 mm : 100 mm : 40 mm : 3 MK : 85 mm : 2,4 / 3 kW : 1582 mm : 715 mm : 1245 mm : 720 kg Heidenhain 3-axis digital readout NEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Quick-release collet chuck with collets from 3 to 30,5 mm Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German with CE declaration of conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 76220 € : 1440.56 € : 1015 mm : 610 mm : 1.000 x 400 mm : 400 x 1.000 mm : 1050 mm : 5 - 25 m/min : 0 - 2.250 mm/min : 0,001 - 32 mm : 450 mm : 480 mm : 0 - 675 mm/min : 0.001 - 0.04 mm : 500 - 1.800 1/min : 3.75 kW : 1.5 kW : 1.1 kW : 1.1 kW : 4280 mm : 2080 mm : 2100 mm : 3500 kg : 220 kg : 440 kg : 355 x 50 x 127 mm : 0,001 mm 10.4", graphic NC control on a swivel arm with touchscreen for: Operating mode selection Cycle selection and program creation Surface grinding Cross grinding Plunge grinding Dressing with automatic compensation Semi-automatic balancing in the machine Automatic spindle speed for constant surface speed Spindle load visualization Unbalance control Graphical status monitoring Alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers ...

: neu : 2026 : 050162 : Mai 2026, Zwischenverkauf : Taiwan : 69400 € : 1311.66 € : 800 mm : 610 mm : 800 x 400 mm : 800 x 400 mm : 810 mm : 5 - 25 m/min : 0.74 kW : 10 kVA kW : 3540 mm : 2080 mm : 2100 mm : 2900 kg : 980 mm : 350 kg : 355 x 50 x 127 mm : 0,001 mm : 500 - 1.800 U/min : 3,75 kW : 1.1 kW 10.4", graphic NC control on a swivel arm with touchscreen for: Operating mode selection Cycle selection and program creation Surface grinding Cross grinding Plunge grinding Dressing with automatic compensation Semi-automatic balancing in the machine Automatic spindle speed for constant surface speed Spindle load visualization Unbalance control Graphical status monitoring Alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magn ...

General SKU309X465 MakeHaagen & Rinau TypeUnimix No.300975/2290 Year of construction1996 Mounted on legscheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume2000 Ltr. Motor30 KW Specified Features - Processing vessel Closed stirring vessel3x Capacity3320 l.(2000 l.)/ 2885 l.(1600 l.) /1445 l. (1200 l.) Dished bottomcheck Slope bottomcheck Dished top sidecheck Flat top sidecheck With covercheck ManholeDN400 Top connectionscheck With jacket2x volume 400 l., 165 l. and 95 l. Max. temperature151°C With anchor stirrercheck With paddle stirrercheck With dissolver stirrercheck Motor18kW, 1450 rpm (EX) With homogenisercheck Motor30kW, 2950rpm (EX) MaterialStainless steel 1.4541 (321) Information LocationBarneveld With switchgearcheck ( as is) Floorspace7x2,5 m Total height± 3.8m ...

: neu : ca. 8 Wochen ab Auftragse : Italien : 143100 € : 2704.59 € : 160 to : 6 mm : 1200 mm : 650 mm : 200 mm : 16 - 160 mm : 35 - 55 1/min : 740x420 mm : 8 : 100 mm : 330 mm : 690 mm : 15 kW : 1410 mm : 2220 mm : 3544 mm : 16000 kg touch screen control semi automatic stroke adjustment die space adjustment with mechanical display decimal resolution adjustable motor speed overload protector automatic cams reset double bolster plate oil circular lubrication dynamic brake safety light guard Keyence Automation and control of press parameters by PLC, alarms and informations displayd on human machine interface touch screen. Standard monitoring: - press speed view and adjustment - programmable piece counter and maintenance piece counter - die space adjustment with brake motor - Semi automatic or automatic stroke adjustment - die safety control - alarms view - overload protector The data f ...

used spiral mixer Boku SK 160 AK extendable, overhauled, 160 kg dough per kettle, 2 timers, with 1 stainless steel kettle, if required with additional kettles for an additional 3.950€ each, stainless steel spiral, newly painted, clocks renewed, 6.9 kW, 16.5 A

used spiral mixer Sveba Dahlen M 160 Premium, checked-through, 160 kg dough, 2 watches, stainless steel kettle, stainless steel spiral, year of construction 2015, 26 A, 400 V, 50 Hz, Ser.-Nr. 71/63

max. wheel diameter:260 mm gear width:320 mm max. module:5 weight of the machine ca.:21 t dimensions of the machine ca.:8,71 x 5,97 x 3,49 m no. of teeth:1...999 max. helix angle:+45/-45 ° pitch min.:0,1 mm pitch max.:1000 mm X-axis:345 mm y-axis:250 mm Z-axis:320 mm b-axis:360 ° c-axis:360 ° Coolant is not available. It was central and there is only a booster pump without filtering. For loading system there is a 2-axes robot with workpiece conveyor.

faceplate diameter:1600 mm power requirement:80 kW weight of the machine ca.:25 t dimensions of the machine ca.:4,4 x 4,62 m max. workpiece diameter:2000 mm max. diameter of face turning:1800 mm tool taper:ISO50 The machine has been regularly serviced and is in good technical condition. With C-Axis

pressure:1000 t table length:4000 mm table width:1600 mm Controls:SIEMENS S7-1500F PRESS DESIGN:. - frame design : Transfer press :. - Drive type : mechnical :. - openings in uprights : yes :. - opening in table : yes :. - moving bolster : yes :. - number of tables:2 PRESS FORCES:. - total force (nominal):1000 to PRESS TABLE:. - clamping surface (left-right):4000 mm - clamping surface (front-back):1600 mm - height above floor level:600 mm - autom. tool clamping device : yes :. RAM:. - stroke:400 mm RAM (MECHAN. PRESS):. - ram adjustment:300 mm - ram adjustment:100 mm - number of strokes min:8 /min - number of strokes max:50 /min - hydraulic overload protection : yes :. TOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):900 mm - shut height (stroke down, adjustment up):766 mm - distance between columns (H-frame):4250 mm - Free passage between side c ...

Keyence Digital Measuring Projector ? Model XM-1600 General: Digital measuring projector with a high resolution image measurement system and very easy operation. Place the part on the stage and measure by pressing a button. Supports automated measurements of up to 300 dimensions within seconds. Measuring Head / Control Unit: ·Sensor: Monochrome CMOS 1 inch, 20 megapixels ·Display: 12.1 inch LCD monitor (WXGA 1280 x 800) ·Lens: Double telecentric lens Measuring Field and Measuring Range: ·Standard measuring field: approx. 100 mm diameter ·Precision mode measuring field: approx. 25 x 25 mm Measurement Accuracy and Repeatability: ·Display resolution: 0.1 micrometer ·Repeatability (standard, without stage movement): approx. plus minus 1 micrometer ·Precision mode (without stage movement): approx. plus minus 0.5 micrometer Stage / Travel Axes: ·XY measuring stage: motorized ·Z axis ...

pressure:160 t throat:370 mm stroke:150 mm total power requirement:45 kW weight of the machine ca.:22 t dimensions of the machine ca.:2,75 x 1,85 x x 4,80 m rules for accident prevention:Vorhanden work table::1500 x 700 mm Documents:vorhanden

turning diameter:1600 mm turning length:3000 mm centre height:800 mm turning diameter over bed:1600 mm turning diameter over bed slide:1400 mm turning dia. over face-slide:1200 mm max. workpiece weight between centers:20 to speeds:5,6 -800 1/min transmission ratio:3 spindle bore:112 mm turret (x-stations):8 / VDI 60 travel -x axis:850 mm travel -z axis:3020 mm rapid power traverse in X-and Z direction:6 / 10 m/min power maindrive:46 kW weight of the machine ca.:22 to. dimensions of the machine ca.:7,2 x 4 (3,11) x 2,7 m tech-in lathe, flatbed, tailstock, 8-pos. BARUFFALDI turret with 4 live tools, power 9kW, 4-pos. BARUFFALDI square-headed turret horizontal, C-axis, 3-jaw hydr. chuck SMW Autoblock KNCS 800/165, dia. 800mm, quick adjustment, power cylinder with 2 pressure clamping system, chipconveyor, coolant device, accessories

faceplate diameter:1600 mm swing diameter:1800 mm turning height:1500 mm max. ram stroke:1200 mm faceplate turning speed range -stepless-:2,5 - 250 U/min workpiece weight max.:10.000 kg ram head dimension:240 x 240 mm feed range:1 - 3000 mm/min power capacity:45 kW weight of the machine ca.:20 t modernized and overhauled in 2010 with CNC SIEMENS 840 D 12 positions automatic toolchanger telescopic covers splash guarding chip conveyor coolant attachment diverse toolholders

material width:850 mm material thickness:0,3 - 1,5 mm no. of straightening rolls:8 straightening roll diameter:40 mm number of draw-in rolls:2 diameter of draw-in rolls:160 mm material thickness with 600 mm material width:1,9 mm material thickness with 400 mm material width:2,3 mm speed:5 - 25 m/min min. material width:200 mm weight:2,8 t Dimensions (WxDxH):1,6 x 2,2 x 2,3 m

material width:850 mm material thickness:0,3 - 1,5 mm no. of straightening rolls:8 straightening roll diameter:40 mm number of draw-in rolls:2 diameter of draw-in rolls:160 mm material thickness with 600 mm material width:1,9 mm material thickness with 400 mm material width:2,3 mm speed:5 - 25 m/min min. material width:200 mm weight:3,1 t Dimensions (WxDxH):2,2 x 1,5 x 2,8 m

material width:400 mm coil weight:3,0 t material thickness:0,5 - 4,0 mm coil internal diameter:460 - 530 mm coil external diameter:1500 mm no. of straightening rolls:9 straightening roll diameter:50 mm no. of lower support rolls:12 no. of upper support rolls:10 diameter of support rolls:90 mm material cross-cut:1600 mm² speed of coil line:0 - 20 m/min power requirement:35,0 kW weight:10,5 t dimensions (WxDxH):10,0 x 2,5 x 2,9 m straightening machine:KRE 50.400/9 adjustment of straightening rolls :motoric insertion wedge:hydraulic adjustable decoiler:3000.1 snubber roll:hydraulic expansion:hydraulic sideway adjustment:motoric pivoting:manual roll feed:Servo; WVE 160/400 intermittant lifting:hydraulic

pressure:160 t distance between columns:1340 mm stroke:300 mm Distance table/ram, max. stroke up, adjustment up:620 mm table surface area:1300 x 900 mm table height over floor:930 mm side window:600 mm ram surface:1300 x 900 mm speed down:367 mm/s speed up:390 mm/s working speed:58 mm/s power requirement:30,0 kW weight:15,0 t Dimensions (WxDxH):2,5 x 2,2 x 4,0 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 foundation pit:not necessary

material width:400 mm material thickness:0,6 - 2,8 mm no. of straightening rolls:5 straightening roll diameter:40 mm no. of pulling rolls:2 + 2 material thickness at 400 mm material width:1,8 mm material thickness at 65 mm material width:2,8 mm power capacity:3,0 kW weight:0,45 t Dimensions (WxDxH):0,8 x 1,8 x 1,35 m

pressure:160 t distance between columns:880 mm stroke:150 mm distance table/ram, max. stroke up, adjustment up:400 mm table surface area:830 x 1000 mm hole in the table:265 x 365 mm table height over floor:850 mm side window:610 mm ram surface:860 x 1000 mm power requirement:55,0 kW weight:14,7 t Dimensions (WxDxH):2,2 x 2,0 x 4,3 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20 depth stop:motoric adjustable table:motoric foundation pit:not necessary

pressure:160 t distance between columns:2050/1900 mm stroke:15 - 170 mm no. of strokes:15 - 40 /min distance table/ram, max. stroke up, adjustment up:690 mm table surface area:1600 x 800 mm side window:800 mm ram surface:1620 x 700 mm ram adjustment:140 mm power requirement:15,0 kW weight:24,0 t Dimensions (WxDxH):3,3 x 2,3 x 5,3 m height over floor:4,8 m height beneath floor:0,5 m clutch:pneumatic ram adjustment:motoric ram counterbalance:pneumatic

pressure:500 t stroke:40 - 160 mm no. of strokes:32 / 48 /min distance between columns:1620 mm distance table/ram, max. stroke up, adjustment up:660 mm table surface area:1600 x 1300 mm table height over floor:750 mm column travel -side:400 x 430 mm ram surface:1400 x 1200 mm ram adjustment:120 mm pressure of drawing cushion in table:60 t stroke of drawing cushion in table:100 mm drawing cushion surface in table:1300 x 810 mm material width of feeder:1000 mm material thickness of feeder:- 6,0 mm feed length:350 mm height beneath floor:0,3 m power requirement:44,0 / 66,0 kW weight:56,0 t Dimensions (WxDxH):3,55 x 2,55 x 5,1/5,8 m height beneath floor without drawing cushion:0,3 m height beneath floor with drawing cushion:1,0 m clutch-/ brake combination:pneumatic; Desch overload protection in ram:mechanical ram counterbalance:pneumatic ram adjustment:motoric drawing cushion in table:pneum ...

pressure:500 t stroke:40 - 160 mm no. of strokes:32 / 48 /min distance between columns:1620 mm distance table/ram, max. stroke up, adjustment up:660 mm table surface area:1600 x 1300 mm table height over floor:750 mm column travel -side:400 x 430 mm ram surface:1400 x 1200 mm ram adjustment:120 mm material width of feeder:1000 mm material thickness of feeder:- 6,0 mm feed length:350 mm power requirement:44,0 / 66,0 kW weight:56,0 t Dimensions (WxDxH):3,55 x 2,55 x 5,1/5,8 m height beneath floor:0,3 m pneumatic clutch-brake combination:Desch Mechanical pincers feed:Obru, BVK 3.10.3

pressure:500 t stroke:40 - 160 mm no. of strokes:32 / 48 /min distance between columns:1620 mm distance table/ram, max. stroke up, adjustment up:660 mm table surface area:1600 x 1300 mm table height over floor:750 mm column travel -side:400 x 430 mm ram surface:1400 x 1200 mm ram adjustment:120 mm pressure of drawing cushion in table:60 t stroke of drawing cushion in table:100 mm drawing cushion surface in table:1300 x 810 mm material width of feeder:1000 mm material thickness of feeder:- 6,0 mm feed length:350 mm power requirement:44,0 / 66,0 kW weight:56,0 t Dimensions (WxDxH):3,55 x 2,55 x 5,1/5,8 m height beneath floor without drawing cushion:0,3 m height beneath floor with drawing cushion:1,0 m pneumatic clutch-brake combination:Desch drawing cushion in table:pneumatic Mechanical pincers feed:Obru, BVK 3.10.3

pressure:160 t throat:370 mm stroke:150 mm distance table/ram, max. stroke up, adjustment up:500 mm table surface area:1000 x 700 mm hole in the table:100 mm table height over floor:820 mm ram surface:600 x 520 mm speed down:350 mm/s speed up:350 mm/s working speed:12 - 36 mm/s oil volume:1100 l power requirement:27,0 kW weight:16,5 t dimensions (WxDxH):1,8 x 2,7 x 3,95 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 depth stop:motoric adjustable

pressure:160 t stroke:160 fix mm no. of strokes:30 - 120 /min distance between columns:1190 mm distance table/ram, max. stroke up, adjustment up:735 mm table surface area:1200 x 1000 mm hole in the table:500 x 300 mm table height over floor:900 mm side window:600 mm ram surface:1000 x 800 mm ram adjustment:125 mm material width of feeder:550 mm material thickness of feeder:0 - 6,0 mm feed length:350 mm material cross-cut:1100 mm² Feed speed:50 m/min power requirement:45,0 kW weight:25,0 t dimensions (WxDxH):2,3 x 2,1 x 4,7 m infinitely variable drive:PIV overload protection in ram:hydraulic ram adjustment:motoric ram counterbalance:pneumatic pincer feed:mechanisch, RS 350/550 SL 90

pressure:160 t throat:360 mm stroke:200 mm distance table/ram, max. stroke up, adjustment up:500 mm table surface area:920 x 700 mm Hole in the table:150 mm table height over floor:960 mm passage to the back:590 mm ram surface:620 x 560 mm speed down:390 mm/s speed up:390 mm/s working speed:58 mm/s power requirement:30,0 kW weight:16,0 t dimensions (WxDxH):1,6 x 2,5 x 3,6 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 depth stop:mechanisch

pressure:160 t distance between columns:1380 mm stroke:300 mm distance table/ram, max. stroke up, adjustment up:500 mm table surface area:1250 x 850 mm pressure of drawing cushion in table:80 t stroke of drawing cushion in table:150 mm die cushion area:450 x 450 mm table height over floor:900 mm side window:250 x 400 mm ram surface:1350 x 850 mm speed down:400 mm/s speed up:350 mm/s working speed:50 mm/s oil volume:1850 l power requirement:58,0 + 11,0 kW weight:24,1 t dimensions (WxDxH):2,85 x 2,15 x 4,6 m German Safety: permitted for manual loading:CE-sign die cushion / ejector in table:hydraulic depth stop:motoric adjustable

pressure:160 t throat:500 mm stroke:200 mm distance table/ram, max. stroke up, adjustment up:500 mm table surface area:1140 x 980 mm hole in the table:180 mm table height over floor:860 mm ram surface:1000 x 800 mm oil volume:1000 l power requirement:50,0 kW weight:18,0 t dimensions (WxDxH):1,3 x 2,6 x 3,4 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 depth stop:mechanical cutting impact cushioning:hydraulic

pressure:200 t distance between columns:1100 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:1100 mm table surface area:1000 x 1000 mm pressure of drawing cushion in table:63 t stroke of drawing cushion in table:250 mm die cushion area:800 x 750 mm table height over floor:800 mm ram surface:1000 x 1000 mm Speed down:400 mm/s speed up:250 mm/s working speed:22 - 56 mm/s power requirement:45,0 kW weight:24,0 t dimensions (WxDxH):2,4 x 1,5 x 5,9 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic

material width coil line:600 mm coil weight:2 x 3,5 t coil internal diameter:460 - 530 mm coil external diameter:1500 mm material thickness coil line:0,5 - 3,0 mm no. of straightening rolls:7 no. of rolls at in- and outlet:4 roll diameter:80 mm feed length:0 - 500 mm power requirement:10,0 kW weight:10,0 t dimensions of the coil line:8,8 x 4,0 x 2,55 m straightening machine:Dimeco, 1676 EV double decoiler:2382 FFPS lag brake:pneumatic electronic roll feed:Microfeed

material width:800 mm coil weight:12,0 t coil internal diameter:470 - 520 mm coil external diameter:1500 mm material thickness:0,4 - 2,5 mm no. of straightening rolls:8 straightening roll diameter:53 mm number of draw-in rolls:2 inlet roll diameter:160 mm speed:35 m/min material thickness at 150 mm material width:2,5 mm material thickness at 650 mm material width:1,5 mm material thickness at 800 mm material width:1,0 mm straightening machine:RM 8-53/160-800 decoiler:HE 200-1000

pressure:160 t throat:690 mm stroke:8 - 180 mm no. of strokes:50 /min distance table/ram, max. stroke up, adjustment up:500 mm table surface area:1300 x 1000 mm hole in the table:400 / 120 mm table height over floor:850 mm passage to the back:900 mm ram surface:1000 x 700 mm ram adjustment:130 mm power requirement:11,0 kW weight:19,0 t dimensions (WxDxH):2,4 x 2,8 x 3,4 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic ram adjustment:motoric ram counterbalance:pneumatic