136,838 used machines on RESALE, but how to find them? Machine Search
General SKU036G115 MakeDrais GmbH Mannheim TypeHT-1600 Turbulent Schnellmischer No.50098 Year of construction1980 LocationBarneveld Pressure Working pressure0 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialMild steel Volume1600 Ltr. Motor67 KW Specified Features - Paddle dryer Turbulent dryercheck Capacity1600 Ltr. Trough sizesdia. 1000x2250mm Inletdia. 300mm Manholedia. 500mm Outletdia. 300mm + dia. 150mm With jacketcheck 170 Ltr. Max. temperature160°C. Motor47,0/67,0 KW, 380 Volt Speed mixing shaft70/35 rpm MaterialMild steel Information Floorspace5,0x3,0 M Total height2,7 MPowdered foodsGeneric medicinesOintmentsFine chemicalsStarchOther chemicalBiotechnologyAgrochemicalsPaddle dryersCatalysts & fillersFeed additivesDiscountOther pharmaceuticsCosmeticsSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsBi ...
General SKU060P266 MakeSA-ET TypeT-160 No.51767 Year of construction1984 LocationBarneveld Main Features MaterialMild steel Volume160 Ltr. Motor5.5 KW Specified Features - Powder turbo mixer Powder turbo mixer(1x) Capacity160 Ltr. Trough sizesDia. 600x660 mm Outlet150x150 mm With adjustable packing glandscheck Motor5,5 Kw, 380 Volt MaterialMild steel General With switchcheck Floorspace1,55x1,25 M Total height0,9 M Weight700 Kg Extra SpecificationsWith T-armsPowdered foodsGeneric medicinesTea, herbs & coffeeStarchOther chemicalSpicesCatalysts & fillersFeed additivesOther pharmaceuticsCosmeticsFood additivesSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicPowder turbo mixersSA-ETIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndustries > Food & Feed > Tea, herbs & coffeeIndustries ...
General SKU424U1351 MakeMorton TypeFKM 1600 No.M 23556 Year of construction7/1987 LocationBarneveld Pressure Working pressure jacket1.5 Bar Main Features MaterialStainless steel Volume1600 Ltr. Motor15 KW Specified Features - Powder turbo mixer Powder turbo mixercheck T-armscheck Capacity1600 ltr. Trough sizes1100x1700 mm InletDia. 200 and 80 mm Inspection hatchcheck Outlet240x180 mm With jacketcheck Max. temperature112°C With adjustable packing glandscheck Motor15 kW, 415Volt, 1460rpm Speed mixing shaft155rpm With lump breaker3x Motor4kW, 400/690Volt, 2870rpm (3x) Speed lumpbreaker2870 rpm MaterialStainless steel 1.4306 (304L), Stainless steel 1.4408 With jacketcheck General Floorspace3,25x1,60 m Total height1,50 m Weight2590 kg Technical specs Extra informationAllowable temp 112°CPowdered foodsGeneric medicinesTea, herbs & coffeeStarchOther chemic ...
General SKU024W116 MakeDrais TypeTC-1600 FM I No.54940 Year of construction1994 LocationBarneveld Pressure Working pressure1 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Volume1600 Ltr. Motor50 KW Specified Features - Powder turbo mixer Powder turbo mixercheck T-armscheck Capacity1600 Ltr Trough sizesdia. 1000x2000mm Inlet2x 500x500mm Outlet± dia. 150mm With jacket(120 Ltr) Max. temperature164°C With adjustable packing glandscheck Motor50/50/50 KW, 400 Volt Speed mixing shaft30/60/90 Rpm With lump breaker(3x) Motor17,5/23,0 KW, 400 Volt Speed lumpbreaker1500/3000 Rpm MaterialStainless steel 1.4571 (316Ti) With jacketcheck General With switchgear(as is) Floorspace4,1x2,5 m Weight10.000 kgPowdered foodsGeneric medicinesTea, herbs & coffeeStarchOther chemicalSpicesCatalysts & fillersFeed additivesDiscountOther pharmaceuticsCosme ...
General SKU404U1206 MakeEdelstahl Maurer LocationBarneveld CEcheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket9 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume167 Ltr. Motor0.37 KW Specified Features - Bioreactor Reactorcheck Capacity167 Ltr. Vessel sizesdia. 500x868 mm Dished bottomcheck Top connectionsDN50 (2x) Outletdia. 33 mm With jacket18 Ltr. Max. temperature-15/150 °C With propellor stirrer(magnetic) Motor0,37 kW, 220-240/380-415 volt, 1385 rpm, (Ex) Speed mixing shaft187 rpm With jacketcheck Bioreactors MaterialStainless steel 1.4404, Stainless steel 1.4435 (316L) General No.208.09.006.29 Year of construction2009 Floorspace0,75x0,75 m Total height1,5 m Weight310 kg Extra SpecificationsRa ≤ 0,6 µmPaints & coatingsGeneric medicinesOintmentsFine chemicalsOther chemicalRubberAgrochemi ...
General SKUR0823 MakeCMR Brevetti Ravinet (Ita) Type16900 ltr Mach.No.1998 Year of construction1988 Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket16 Bar Main Features MaterialStainless steel Motor15 KW Surface8 m2 Specified Features - Nutsche filter Nutsche filter/dryercheck Filter surface8 m2 Capacity16900 ltr Vessel sizesdia.3300 x 2250mm Top connections2x DN600, DN200, 4x DN80, 2x DN40 Solids outletDN100 Liquid outlet10x DN40 With jacket(70 ltr) Max. temperature-30/200 degr.C With stirrercheck Motor15 kW, 380 Volt (EX) Stirrer speed8 rpm Cake capacity4000 Ltr Stirrer can be liftedcheck MaterialStainless steel 1.4435 (316L) With jacketcheck General LocationBarneveld Floorspace4,0x4,0 M Total height5,0 M Weight8000 Kg ATEX designedcheckOils & fatPowdered foodsGeneric medicinesOintmentsFine chemicalsStarchOther chemicalB ...
General SKU404U1205 MakeEdelstahl Maurer No.208.09.006.28 Year of construction2009 LocationBarneveld Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket9 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume167 Ltr. Motor0.37 KW Specified Features - Bioreactor Reactorcheck Capacity167 Ltr. Vessel sizesdia. 500x868 mm Dished bottomcheck Top connectionsDN50 (2x) Outletdia. 33 mm With jacket18 Ltr. Max. temperature-15/150 °C With propellor stirrer(magnetic) Motor0,37 kW, 220-240/380-415 volt, 1385 rpm, (Ex) Speed mixing shaft187 rpm With jacketcheck Bioreactors MaterialStainless steel 1.4404, Stainless steel 1.4435 (316L) General Floorspace0,75x0,75 m Total height1,5 m Weight310 kg CEcheck Extra SpecificationsRa ≤ 0,6 µmPaints & coatingsGeneric medicinesOintmentsFine chemicalsOther chemicalRubberAgrochemi ...
General SKUR1192 MakeKleiser GmbH (DE) Type1600 Ltr No.3071 Year of construction1991 LocationBarneveld Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket16 Bar Main Features MaterialStainless steel Volume1600 Ltr. Motor1.1 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity1860 Ltr (nett.1600 Ltr) Vessel sizesdia.1000 x2560mm Dished bottomcheck Dished top sidecheck Top connections2x DN200, 2x DN100, 3x DN50 OutletDN80 With jacket23 Ltr. Max. temperature-30/200°C. With propellor stirrercheck Motor1,1kW, 220/380Volt, 1400rpm. (EX) Speed mixing shaft752 rpm With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) General Floorspace1,4x1,4m Total height2,8m Weight650 Kg ATEX designedcheckPaints & coatingsGeneric medicinesOintmentsFine chemicalsOther chemicalRubberAgrochemicalsPlastic & p ...
General SKU404U1212 MakeEdelstahl Maurer LocationBarneveld CEcheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket9 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume167 Ltr. Motor0.37 KW Specified Features - Bioreactor Reactorcheck Capacity167 Ltr. Vessel sizesdia. 500x868 mm Dished bottomcheck Top connectionsDN50 (2x) Outletdia. 33 mm With jacket18 Ltr. Max. temperature-15/150 °C With propellor stirrer(magnetic) Motor0,37 kW, 220-240/380-415 volt, 1385 rpm, (Ex) Speed mixing shaft187 rpm With jacketcheck Bioreactors MaterialStainless steel 1.4404, Stainless steel 1.4435 (316L) General No.208.09.006-27 Year of construction2009 Floorspace0,75x0,75 m Total height1,5 m Weight310 kg Extra SpecificationsRa ≤ 0,6 µmPaints & coatingsGeneric medicinesOintmentsFine chemicalsOther chemicalRubberAgrochemi ...
General SKU316W643 LocationBarneveld CEcheck MakeSB Schneckenbau GmbH Main Features Motor1.1 KW Length1634 mm Inlet diameter230 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Trough-typecheck Diameter270 mm Length1634 mm Between inlet and outlet1500 mm Shaft diameter85 mm Pitch200 mm Inletø 230 mm Outletø 290 mm Motor1.1 kW,(400 V, 1700 rpm) Screw speed40 rpm Height between in- and outlet500 mm With coverscheck MaterialStainless steel 1.4301 (304) General TypeTSE 250/1634 Mach.No.04/3371 Year of construction2004 Floorspace2,60 x 0,40 m Total height0,90 m Weight320 kg Extra Specifications- opening for dust extraction/filter on topOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatal ...
B&A REF: 9291 TON: 160 SCREW DIAMETER: 50MM SHOT WEIGHT: 402 STROKE VOLUME: 442CM3 INJECTION PRESSURE: 1946AR PLATEN SIZES: 770 X770MM DBTB: 520 X 520MM MIN MOULD HEIGHT: 275MM MAX MOULD HEIGHT: 585MM MOULD OPENING STROKE: 500MM MAX DAYLIGHT: 1085MM EJECTOR STROKE: 160MM CONTROLS: NC5 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 22 SERVO DRIVE HEATING CAPACITY: 14.8KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC
B&A REF: 9262 TON: 210 SCREW DIAMETER: 60MM SHOT WEIGHT: 800 STROKE VOLUME: 880CM3 INJECTION PRESSURE: 1840AR PLATEN SIZES: 870 X 790MM DBTB: 710 X 510MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 630MM MOULD OPENING STROKE: 540MM MAX DAYLIGHT: 1170MM EJECTOR STROKE: 225MM CONTROLS: DIMI EL2 PLUS CORE PULLING: 1 AIR VALVES: 1 MOTOR: 30 HEATING CAPACITY: 25KW SCREW DRIVE: HYDRAULIC
General SKU028B135 MakeHanag Oberwil No.11940/4 Year of construction1993 Mounted on legscheck Specified Features - Bioreactor Material finishPolished inside With jacketcheck Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume1600 Ltr. Motor2.5 KW Specified Features - Bioreactor Reactor(1x) Capacity1600 Ltr Vessel sizesdia. 1200 x 1296mm, Insulated vessel Dished bottomcheck Dished top sidecheck Manhole/hand hole dia. 200mm Top connections2x dia. 40mm + dia. 50mm Outletdia. 40mm With jacketcheck Max. temperature-10/+160 Degr. C. With paddle stirrercheck Motor2,5 kW (400 V, 1450 rpm) Speed mixing shaftvariable (± 19-150 Rpm) Bioreactors MaterialStainless steel 1.4435 (316L) General LocationBarneveld With switchgear(as is) Floorspace1,9 x 1,4 m Total ...
Offer 26143 Technical data: - Tip height 165 mm - Center width 750 mm - Turning diameter over bed 330 mm - Turning diameter via face slide 170 mm - Spindle bore 42 mm - Pick-up cone of the tailstock quill MK 3 - Travel of the tailstock quill 140 mm - Spindle speeds 18 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches - Inch thread - Module thread - Drive 400 V / 1.5 / 2.8 kW - with: - 2 pieces 3 jaw chucks - Bezel - 4 pieces SWS steel holder - Div. Drehmeisel - Space requirement approx. W 1800 x H 1150 x D 900 mm - Weight approx. 800 kg
This 5-axis BIESSE Rover A Edge 1643 was manufactured in 2017. It features a versatile CNC machining center with an edge banding unit, ideal for various applications. If you are looking to get high-quality CNC processing capabilities, consider the BIESSE Rover A Edge 1643 machine we have for sale. Contact us for further details.
diameter range 6 mm shaft length under head 145 mm cutting length 165 mm output - pieces/min 100
Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: Deuma Heaters, Container Rotating Device Welding Rotating Device Type W05 -Drive motor: -Load capacity: 9500 kg -Roller spacing: 600 - 1670 mm -Rollers: Ø 395 mm -Rolling speed: 0.2 to 1.45 m/min Right/Left rotation -Control unit: with manual control -Individual components: see photos -Transport dimensions: 2770/1120/H560 mm / 2350/990/H560 mm -Weight: 2510 kg
General SKU050C445 MakeRietschle TypeVWP 160-3 Mach.No.1717273 Year of construction1995 Pressure Working pressure0.0005 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume160000 Ltr. Motor9.35 KW Specified Features - Vacuum pump Pumpcheck Number of pumps:Vacuum pump and booster pump Capacity160 m3/Hr With motor7,5 kW and 1,85 kW (400 V, (Ex)) MaterialNickel alloy (201) 2.4068, Stainless steel 1.4408 General Mounted on framecheck LocationBarneveld With switchcheck Floorspace1,4 x 1,1 m Total height2,1 m Weight1200 kg ATEX designedcheck Extra Specifications- with booster pump WKP 500A (1995) Technical specs Extra information0,5 mbar Enddruck (abs)Oils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts ...
General SKU050C446 LocationBarneveld MakeRietschle TypeVWP-160-3 Pressure Working pressure0.0005 Bar Main Features MaterialStainless steel Volume160000 Ltr. Motor6.8 KW Specified Features - Vacuum pump Pumpcheck Capacity160 m3/hr With motor6,8 kW, 400 Volt (Ex) MaterialNickel alloy (201) 2.4068 General Mach.No.1810472 Year of construction1997 Mounted on framecheck With switchgear(as is) Floorspace1,5 x 1,4 m Total height1,8 m Weight1150 kg ATEX designedcheck Technical specs Extra information0,5 mbar Enddruck (abs)Oils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherVacuum pumpsSolventsDiscountDetergent & surf.Other pharmaceuticsCosmeticsE-waste & metalFood additivesSugarLub ...
Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, fixings, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Manufacturer: Huron, Screw stand, 2 pieces -Minimum height: 110 mm -Max. height: 165 mm -Submission/Price: complete -Dimensions each: 112/92/H110 mm -Weight: 1.9 kg/piece
Overhead crane construction / rails / double T beam HEB - IPE Construction for bolting together from supports and crane runway rails Supports : 10 x HEB 160 at a height of 3.86 m 4 x IPE 300 at a height of 3.86 m AND Crane runway rails (welded on it with square solid material 30 x 40 mm) for screwing to the supports : 2 x IPE 300 in 13 m length 1 x IPE 300 in 11 m length 1 x IPE 300 in 7 m length For Sale Complete, total weight is about 5 tons. Price 6000 Euro net + 1140 Euro ( 19 % VAT) = 7.140,00 Euro gross VAT can be declared Price includes loaded onto truck. Viewing by appointment Shipping available for an extra charge
Qty. 1 Second-hand Aluminium Extrusion Press Line Mfc.: Youngstown USA Force: 1650 MT Billet dia.: 6”, 152 mm Built: early 1980s, completely Revamped in 1999 Production start: 1999 Stopped: 2025, but still under power Billet size: 6”, 152 x 550 mm Press Type: Horizontal Hydraulic, Direct Extrusion PLC: LS XGK (Korea) Required floor space: 20 mtrs x 60 mtrs
A Bullmerwerk fabric spreading machine including a Wastema band knife cutting machine is available. 1) Bullmerwerk fabric spreading machine, ESV20-160, max. fabric width: 1800mm, table length range: approx. 9500mm-13500mm, table width range: approx. 1800mm-2000mm, max. ply length: approx. 11000mm. Year of manufacture: 1985. 2) Wastema band knife cutting machine, cutting height range: approx. 250mm-300mm, throat depth range: approx. 750mm-1270mm, band knife speed: approx. 16m/s, weight: approx. 300kg. 3) Rietschle SKG 226-2.02 vacuum unit, year of manufacture: 1984. The system including 3 pieces km Mack KS-AU-V, speed: 3000/3600 rpm. Inspection possible by arrangement.
Dörries Contumat VCE 2000-160Year of manuf. : 1991 Control : Siemens 840 Dsl Turning diam. : 1600 mmTurning length : 1800 mm____________Description:In General:Year of manufacture:1991 / 2010Control system retrofit:2010Control system:Siemens 840 DslCircumferential diameter:2,000 mmTurning diameter:1,600 mmTurning height:1,800 mmTable / Faceplate:Technology:Gear-driven tableSpeed:315 rpmPower:105 kWMax. torque:50,000 NmFaceplate:1,600 mmMax. table load:12,000 kgTool carrier:Crossbeam travel (vertical):1,200 mmChisel slide travel:1,500 mmSupport travel (horizontal):2,300 (+/-1,150) mmPenetration diameter:340 mmChisel slide cross-section:240 x 240 mmEquipment:Tool magazine:20 stationsChip removal:Chip conveyorCoolant supply:Coolant system with filterTool measurement:ProbeSet-up:Electronic handwheelTool holders:Various tool holdersControl system overhaul:Year of overhauling:2010Technol ...
Key data: 10000 kN, 135 mm
ENGEL 16050/1000 - 1000T Clamping force: 1000 T Platen dimensions (h × v): 1990 × 1740 mm Distance between tiebars (h × v): 1400 × 1150 mm Mold thickness (min - max): 400 - 1200 mm Screw diameter: 135 mm Injection capacity: 8875 cm³ Specific injection pressure: 1980 kg/cm² (≈ 1940 bar) Equipment: • Bi-material barrel (screw and cylinder) • 4 cores ENGEL 1000 Tonnes – 2 identical machines Year 2003: 47,200 h Year 2004: 50,500 h
Offer 19370 Technical data: - Volume flow approx. 1447 m³/h. - Negative pressure 2200 Pa - Filter area 9.5 m² - Drive power 400 V / 2.2 kW - Required space W 1750 x H 2150 x D 900 mm - Weight approx. 350 kg
Sterisart Universal Pump for Sterility Testing Manufacturer: Sartorius Type 16420 SN - 61070345 The Sterisart universal pump version 16420 consists of Pump housing with pump head, lever, bracket and handles. The selector head sits in the front right. On the left side of the pump is the tripod with bottle holder and holding arm. On the tripod, the control unit is still connected via the clamp Control panel attached and connected to the pump with the connection cable with plug Connected. The control unit includes: Display display, 2 soft keys, 1 Esc key, window for barcode scanner, connection cable with Plug to pump
A Vollmer CNC 5-axis tool grinding machine for machining rotationally symmetrical solid carbide tools, milling cutters and drills is available. Grinding wheel interface: HSK50, max. workpiece diameter: 50mm, max. workpiece length: 265mm, max. grinding length: 200mm, max. grinding wheel diameter: 150mm, travel X/Y/Z: 350mm/450mm/500mm. Machine dimensions X/Y/Z: approx. 2200mm/2200mm/2800mm, weight: approx. 4900kg. Documentation available. An on-site inspection is possible.
A Vollmer CNC 5-axis tool grinding machine for the complete machining of solid carbide rotary tools is available. Tool holder: HSK50, tool positions: 8, max. workpiece length: 340mm, max. grinding wheel diameter: 150mm, travel X/Y/Z: 330mm/450mm/500mm, workpiece magazine: pallet magazine, workpiece capacity: 272. Machine dimensions X/Y/Z: approx. 2650mm/2800mm/2200mm, weight: approx. 5550kg, control: Vollmer. Including automatic HP160 workpiece magazine. Documentation available. An on-site inspection is possible.
A Vollmer CNC 5-axis tool grinding machine for the manufacture and regrinding of solid carbide rotary tools is available. Grinding spindle interface: HSK50, max. workpiece diameter: 100mm, max. workpiece length: 360mm, max. grinding wheel diameter: 150mm, travel X/Y/Z: 350mm/450mm/500mm, workpiece magazine: pallet magazine, workpiece capacity: 272. Machine dimensions X/Y/Z: approx. 2650mm/2800mm/2200mm, weight: approx. 5550kg, control system: Vollmer. Including automatic workpiece magazine HP160. Documentation available. An on-site inspection is possible.
A Vollmer CNC 5-axis tool grinding machine for the complete machining of solid carbide rotary tools is available. Tool holder: HSK50, tool positions: 8, max. workpiece length: 340mm, max. grinding wheel diameter: 150mm, travel X/Y/Z: 330mm/450mm/500mm, workpiece magazine: pallet magazine, workpiece capacity: 272. Machine dimensions X/Y/Z: approx. 2650mm/2800mm/2200mm, weight: approx. 5550kg, control: Vollmer. Including automatic HP160 workpiece magazine. Documentation available. An on-site inspection is possible.
max. workpiece length: 3500 mm profile spindle: 2 Stück main drive: 40 kW Control: bSolid Biesse Winline 1650 with loading and unloading system --------------------------------------------------- CNC machining center for fully automated window and door production Workpiece dimensions (configuration) --------------------------------------------------- Automatic loading (raw stock dimensions): Length (X): 300 mm to 3,220 mm Width (Y): 25 mm to 264 mm Thickness (Z): 20 mm to 150 mm Maximum working area: X-axis: Up to 3,570 mm (with combined finger and EPS tables) Y-axis: 1,500 mm Work table: --------------------------------------------------- 6 finger consoles with individual clamps, 4 HTS consoles, and 12 adjustable mounting positions for arched components and vacuum-clamped parts. Main spindles: --------------------------------------------------- Two liquid-cooled 30 kW high-performance ...
Simplacutter model IV 110×160 Cauhe die cutter - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Simplacutter model IV 110×160 Cauhe die cutter Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Simplacutter model IV 110×160 Cauhe die cutter Price: 37500 EUR Download PDF Simplacutter model IV 110×160 Cauhe die cutter The machine is fully operational, like new. Made in Spain. Frame size: 1100×1600 mm Sheet size: 1160×1680 mm Weight: 8500 kg Power supply: 380 V Installed power: 7.5 kW Impact force: 350 t Equipment: – pneumatic clutch and brake – control panel – two frames – 2 opera ...
Key data: 500 kN
Clamping force: 500 kN Clamping plate: 540 x 540 mm Tool opening travel: 350 mm Tool installation height min.: 200 mm Opening width: 500 mm Ejector stroke: 100 mm Total weight: approx. 2,300kg
Durselen PB 16A four-head paper drill - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Durselen PB 16A four-head paper drill Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Durselen PB 16A four-head paper drill Price: 8750 EUR Download PDF Durselen PB 16A four-head paper drill The device is in perfect condition, like new! This is the newest one. currently produced model. Production Germany. Four drilling heads with adjustable spacing. The machine has a pneumatic drill cooling system. Sliding work table. Automatic column system – a belt that is moved to the next position when worn out Tec ...
Hang 162-55 riveter for the production of kitchen knives - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Hang 162-55 riveter for the production of kitchen knives Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Hang 162-55 riveter for the production of kitchen knives Price: 4300 EUR Download PDF Hang 162-55 riveter for the production of kitchen knives Manufacturer: Hang Germany The machine is used to crimp rivets in knife holders. For medium and large series Solid welded construction Two motorized rivet feeders, rotating sorting bins Pin rivet tool and transport slider for hollow rivets Pr ...
A mobile Höcker dust extraction and filtration unit is available. Inlet diameter: 140mm/160mm, max. airflow: 1950m³/h, max. vacuum: 2600Pa, filter category: H3, machine dimensions X/Y/Z: approx. 1450mm/1050mm/2000mm, weight: approx. 350kg. Documentation available. An on-site inspection is possible.
honing length max.: 406 mm honing diameter: 1.5 - 165 mm spindle turning speed range: 200-2500 U/min weight of the machine ca.: 0.48 t dimensions of the machine ca.: 1.3 x 1.35 x 1.5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 160 t, 3100 mm
Bystronic EPII31-160 - CNC Press Brake Bending length: 3100 mm Capacity: 160 t - Cybelec DNC 880S CNC control - Hydraulic crowning - Air bending - Incl. many tools - incl. operating instructions - Hours: 7266 - Executed bends: 315673 - Year of construction 2007 Technical data - Capacity: 160 t - Length from the table: 3150 mm - Distance between side frames: 2450 mm - Number of cylinders: 2 - Cantilever: 300 mm - Daylight: 465 mm - Width of the work table: 60 mm - Working height: 920 mm - Stroke length: 200 mm - Approach speed: 100 mm/s - Bending speed: 9.8 mm/s - Retraction speed: 95 mm/s - Tilting of the upper bending beam: +/- 13 mm - Cambering: Hydraulic - Y-axis accuracy: 0.01 mm - Air bending: Yes - Clamping of the upper tool: Manual - Die clamping: Manual - Area X of the saddle: 600 mm - X-axis movement: 600 mm - Min. movement speed X: 400 mm ...
Manufacturer: WILD INDAG, now part of the SPX Flow Group Type: INO1 CC 160 VT TS100 Year of Make: 2010 Working Principle: Rotary Lobe Pump Max. pressure: 16 bar Drive: SEW-Eurodrive 5.5 kW geared motor Most recently used in butter production Version for food applications Condition: very good
Overview This Krones Linapac A-T-1600 automatic bottle unpacker was manufactured in 1998 and was previously installed in a returnable glass beer bottling line. The machine is designed to automatically remove empty bottles from beverage crates and transfer them onto the bottle conveyor system for further processing. The unpacker was operated in a production line with a capacity of approximately 33,000 bottles per hour, making it suitable for high-capacity returnable glass operations. Machines of the LINAPAC series are widely used in the beverage industry due to their robust design and reliable crate handling. The machine is currently out of production but complete, electrical disconnected, and available for inspection. Documentation and CE conformity are available. Technical Data Manufacturer: Krones / Linapac Model: A-T-1600 Machine type: Automatic bottle unpacker Year of manufacture: 19 ...
used
Dieses originale Bosch Staudruckventil stammt aus einer fachgerechten Demontage und befindet sich in gebrauchtem Zustand. Vor dem Verkauf wurde es sorgfältig überprüft, gereinigt und auf Funktion getestet. Das Teil ist technisch einwandfrei und voll funktionsfähig. Normale Gebrauchsspuren wie kleine Kratzer oder Verschmutzungen durch den vorherigen Einsatz können vorhanden sein, haben jedoch keinen Einfluss auf die Funktionsweise. Hersteller: Bosch Teilenummer: - Type: 0 811 402 163 / 0811402163 Staudruckventil Anwendung: Ersatzteil für Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referenznummer: 38096423
Key data: 1600 mm, 1250 mm, 1000 mm
Vertical machining center Manufacturer: DMG Type: DMU 160 P duoBLOCK Year of Make: 2007 Control: Heidenhain ITNC 530 Axes: 5-axis simultaneous Travels X: 1600 mm Y: 1250 mm Z: 1000 mm Tool changer: 60 tool positions Speed: 18,000 rpm - HSK 63 - Probes - Tool measurement Blum Laser - Coolant tank 980 litres - IKZ 40 Bar - Chip conveyors - Electronic handwheel - Operating mode 4 - Preparation of 3-D Quickset (software) - Universal milling head with controlled A-axis Machine from Space Institute. Excellent condition. Errors and prior sale excepted.
EU STAGE 5 Compliant, The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 2527; Engine: Perkins 1204J-E44TTAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, 50/60 Hz switchable frequency via terminal link, 115 kVA Prime power, Spark arresting silencer; Water Tank Volume [l]: 518
The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 1144; Engine: Perkins 1104A-44TG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including battery charger and coolant heater; Water Tank Volume [l]: 180
The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 5554; Engine: Perkins 2806A-E18TAG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1132
The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 979; Engine: 1103A-33TG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 145
The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 5033; Engine: Perkins 2506A-E15TAG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 888
The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 3253; Engine: Perkins 2206A-E13TAG3; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 888
The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 2854; Engine: Perkins 1506A-E88TAG4; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger; Water Tank Volume [l]: 528
maximum number of results exceeded
please refine your search
