fp 16 used for sale

Dimensions (L/W/H): 3500x1950x1500 mm Weight: 2500 kg Total power requirement: 58,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, testing is possible by prior arrangement.

Technical data of the pallet rack crossbar: Shelving system: Jung Heinrich Type: MPB The scope of delivery includes: 01x Pallet rack crossbar, new Material colour: yellow Box profile: 160 x 50 x 1.75 mm Truss type: AUF ́B ́E0436 Agraffe: 4 HK (hooks) Clear width: 3,400 mm 02x Locking pins, used Design: completely galvanized For securing the longitudinal members Against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. A more than desired transport or shipment of this item is additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.

JCB 16C-1 mini excavator, - only 893.5 operating hours, 

- Producer Printworld - Type PUVD 1600-2 - Year of construction 2008 - Working width 1.600 mm - Working height 1.030-1.050 mm - Max. part height 25 mm - Operationside left - Number of lamp from top 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp 120 W/cm - Selective shiftable 60 / 90 / 120 W/cm - Conveyor with netbelt - Feed speed adjustable 2 - 50 m/min - Installation length 3.300 mm - Machine measure 3,3 x 2,5 x 1,8 m - Location - Voltage / HZ 400 / 50

Only 5 hrs. Traded-in from customer who needs more power., Warranty is still applicable., Used Generator Set.; Gross weight [kg]: 1825; Engine: Perkins 1106A-70TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 320

- Producer Elmag Superfici - Type TU 166 - Year of construction 2001 - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable - Length cross bar conveyor - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Voltage / HZ 400 / 50 - Commodity code 8419 3200

spindle diameter: 160 mm x-travel: 10500 mm y-travel: 4000 mm spindle taper: ISO 50 z-travel: 950 mm turning speeds: 3,15-1000 U/min transmission ratio: 4 spindle power: 58 kW Support sleeve: 340x400 mm w-travel: 900 mm Feed: x 0,12-9600 mm/U Feed: y/z/w 0,1-5600 mm/U Plate area: 39,5 m² Plate: 5400x3500 mm Plate: 5900x3500 mm T-slot - distance: 365 mm T-slots: 35/75 mm Thickness of the plate: 360 Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or ...

- Producer Elmag Superfici - Type TU 166 - Year of construction 1997 - Working width 1300 mm - Operationside right - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Selective shiftable - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Length 6.000 mm - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

Year of manufacture: 2021, Length: 600 cm, Technical condition: very good, Visual appearance: very good, Damages: none, Price: On request, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p.m. Call, text, or email us, whichever you prefer., , Want to visit us? Yes, please!, , Our doors are open Monday through Friday from 7:00 a.m. to 4:00 p.m. On Saturdays, you are welcome by appointment.

Dutchi DM1 160 M4 electric motor with 11 kW and 1440 rpm at 50 Hz and 13.2 kW and 1730 rpm at 60 Hz, sizes: 600x320x430 mm (LxWxH), weight: 113 kg;

Used hot air generator with oil burner Ready for operation at the site

Air steam die forging hammer : Capacity : 16 tons, Nominal mass of drop parts : 16000 kg, Impact energy : 400 KJ, Ram stroke : 1500 mm, Ram stroke per minute : 20, Distance clear between guides : 1180 mm, Ram dimensions front to back : 1500 mm, Die holder dimensions front to back : 1600 mm, Bottom die impression to floor distance : 500 mm, Steam/air pressure : 0.7-0.9 MPa, Overal dimensions : - Floor space : 4500 x 2450 mm, - Height above floor level : 7920 mm, Mass of anvil block : 325 tons, Total weight of hammer : 425 tons.

ABB IRB 1600 M2004 Industrial Robot with IRC5 Controller – Used, Serviced Manufacturer - ABB Robot Model - ABB IRB 1600 M2004 Controller - IRC5 Controller - Includes IRC5 control cabinet / control unit Type / Configuration - Industrial articulated robot - With Manipulator + Controller - Includes A-position encoder (as stated: mit A-Positionierer”) Condition - Used - Controller was serviced / refurbished: - Deep cleaning of controller - Replacement of filters - Replacement of C-MOS battery - Replacement of SMB battery Find more here - / Contact us at -

AEG 3~ Motor AM 160 LZA4 15kW 1460 1/min 60Hz Electric Motor Pumpenmotor Dieses originale ABB 3~ Motor stammt aus einer fachgerechten Demontage und befindet sich in gebrauchtem Zustand. Vor dem Verkauf wurde es sorgfältig überprüft, gereinigt und auf Funktion getestet. Das Teil ist technisch einwandfrei und voll funktionsfähig. Normale Gebrauchsspuren wie kleine Kratzer oder Verschmutzungen durch den vorherigen Einsatz können vorhanden sein, haben jedoch keinen Einfluss auf die Funktionsweise.

ATB 3~ Motor AF 160M/4A-11 11 kW 1465 1/min 50/60 Hz 82kg Electric Motor Hersteller: ATB Teilenummer: 465046H Type: AF 160M/4A-11 Anwendung: 3~ Motor, Pumpenmotor, Electric Motor Zustand: gebraucht, geprüft, voll funktionsfähig Referenznummer: 4005711 Weitere Informationen: Vollständig getestete Motor

AEG 3~ Motor AM 160 LZA4 15kW 1460 1/min 60Hz Electric Motor Pumpenmotor Dieses originale AEG 3~ Motor stammt aus einer fachgerechten Demontage und befindet sich in gebrauchtem Zustand. Vor dem Verkauf wurde es sorgfältig überprüft, gereinigt und auf Funktion getestet. Das Teil ist technisch einwandfrei und voll funktionsfähig. Normale Gebrauchsspuren wie kleine Kratzer oder Verschmutzungen durch den vorherigen Einsatz können vorhanden sein, haben jedoch keinen Einfluss auf die Funktionsweise.

L+Z Lathe WEILER Praktikant 160 – Partially Overhauled Machine in very good used condition – delivery on order, delivery time by arrangement! ✅ Technical data Year of construction: approx. 1990 Digital Display: 3-Axis (NEW) Max. turning diameter over bed: approx. Ø 320 mm Max. turning diameter via support: approx. Ø 198 mm Max. turning length: approx. 650 mm Bar passage: approx. Ø 40 mm Spindle speed: 96 – 2500 rpm Spindle nose: A 2 - 5 Drive power: approx. 2.2 kW Threading: Metric, Inch, DP, Module Tailstock: MK 3 Dimensions (LxWxH): approx. 1700 x 1000 x 1700 mm Weight: approx. 650 kg ✅ Accessories 3-jaw chuck 160 mm (NEW) Quick-change steel holder + 1 insert Electric Lining Guard (NEW) Work light (NEW) Complete machine documentation Emergency stop Various tension wrenches Coolant Setup L+Z Spindle  ...

ATB 3~ Motor AF 160L/4E-11 15 kW 1465 1/min 50/60 Hz Electric Motor Dieses originale ATB 3~ Motor stammt aus einer fachgerechten Demontage und befindet sich in gebrauchtem Zustand. Vor dem Verkauf wurde es sorgfältig überprüft, gereinigt und auf Funktion getestet. Das Teil ist technisch einwandfrei und voll funktionsfähig. Normale Gebrauchsspuren wie kleine Kratzer oder Verschmutzungen durch den vorherigen Einsatz können vorhanden sein, haben jedoch keinen Einfluss auf die Funktionsweise.

Transnorm spiral helix belt curve conveyor right 90°-750-650 IR1200 RA2437 Technical data: Frame width (NB): 750 mm belt width (GuB): 650 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees decline: 200 mm / 90° = 800 mm / 360° support feet: optionally available Conveying speed (v m/s): 0,35-1,21 Drive: SEW gear motor with movi-mot frequency converter for stepless speedcontroll Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive angle: 90° scope of delivery: including Movimot frequency converter KW: 0,55/S1 Construction year: 2001 B ...

Spiral mixer Diosna SP 160 AD/T revised and repainted immediately available in stock for sale. - Extendable spiral mixer with 2 stainless steel boilers - Manufacturer: Diosna Dierks & Söhne GmbH - Type: SP160AD - for a maximum of 160kg of dough or for a maximum of 100kg of flour - With 2 timers, automatic for slow and fast gear - Automatic switching on and off via clocks - With flour dust cover - 2 speeds (gears), slow and fast - Boiler locking via pliers operated with hydraulics - with 2 stainless steel vats - Suitable for almost all doughs - Robust and strong - Tub capacity 260 liters

Key data: 1600 KW, 2000 kVA, 400 V

MTU 16V 400 L61 1600 kw 2000 kva Stamford PI743F2 1500 rpm 50hz 400Volt 18.000 hours after major overhauling Genset including control panel, Gasline, heat island with pumps and exhaust gas cooler Genset is located in our warehouse in the netherlands: Kranenpool 10 6443VA Brunssum NL check our website for more generators and accessories: generalpowerholland.nl

The knife, also known as a cutting blade or blade, from Muller Martini with the part number 0440.1689.2 is a mechanical attachment for cutting applications. It has the dimensions 24 x 8 x 24 cm and a weight of 1.9 kg. Knives serve as a precision-cutting tool in various machines and processes to separate materials such as paper, cardboard, films or fabrics cleanly and efficiently. Typical applications can be found in printing presses, converting equipment for paper and cardboard, textile machinery and in the food industry. OEM P/N 0440.1689.2 OEM P/N (Clear) 044016892 Weight 1.9 kg kg Dimensions 24 x 8 x 24 cm Package weight: 1.9 kg Packaging dimensions 24 x 8 x 24 cm

Grinder Laska -Type: WW 160 1 -Power: 27 kW -Throat diameter: 160 mm -With loading -With technical documentation -Knife and sieve set -Made of stainless steel -Hydraulic screw extension -Power supply: 400V 50Hz 3Ph -Dimensions with loading: 2600 x 2150 x 2880 mm -Condition: Used in very good condition, overhauled, ready to work

pressure: 160 t chamfer lenght: 3000 mm distance between columns: 2650 mm Control: Cybelec DNC 800 total power requirement: kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinder Meissner -Type: SR 160/2 -Power: 18/25 kW -Throat diameter: 160 mm -Number of main screw speeds: 2 -Number of feed screw speeds: 2 (speed control via inverter) -Including loading for 200L trolleys -Dimensions with loading: 2500 x 1900 x 2720 mm -Throat made of brass -Machine made of stainless and acid-resistant steel -Power supply: 400V 50Hz 3N -Condition: used in very good condition, ready to work

Clean air extraction system SCHUKO Vacomat 140/160 XPe display unit - Filter generation motorized, mobile, extraction side right or left, remountable---------- Technical data ---------- test mark: H3 / BGHM HO 193023, extraction nozzle Ã: 1 x 140 / 160 mm, nominal volume flow: 1,447 m³/h, max. vacuum: 2,200 Pa, filter area: 9.5 m², residual dust content: < 0.1 mg/m³, number of bags: 1 piece, motor: 2.2 kW, dimensions (LxWxH): 1,665 x 900 x 1,980 mm, weight: 306 kg, Dust class M: AWN 16- new exhibition machine -

- Work piece up to 1530 x 1295 x 3500 Kg - Tool size up to 650 mm length and 30 Kg - Tool size up to 400 x 250 mm and 30 Kg - Extende feed rate up to 15 kN-100% ED - Coolant Filtration     - BLUM Laser NT - 3D Quick ser - MPC protection - 3D Measuring probe - DXF Import   - Tool package 180 Tool HSK-100A - 2 x Cast iron angle plates 1500 mm   - 15000 Working hours - 1e owner machine 

working diameter: 140 mm turning diameter: 185 mm workpiece length: 120 mm control: Siemens turning speeds: 7.000 U/min Vertical Turning Machine | FAMAR - BISUB 160 2G The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: BISUB1602G | BISUB160 2G | BISUB-160 2G The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

RÖCHER conversion 1991 (formerly SCHÖN) Pressure capacity 1,600 kN Plunger stroke160 mm Table dimensions 850 x 650 mm Light barrier control next due exam February 26 Tenon clamp lock in the ram Express lowering speed 274 mm/s Working speed 20/10 mm/s Return speed 273 mm/s Drive power 30 kW Operating voltage 380 volts/50 Hz Fuse max. 100 A

Packaging of bottles or similarly shaped products in cardboard trays or shrink packs (depending on the configuration). Ideal for use in production lines for beverages, food or pharmaceuticals. Working principle : Tray packaging / outer packaging Capacity : 17 cartons per minute Control System :Siemens S7 PLC

Construction: 4-column frame with slip ring, applicator for applying cover films Capacity : 45 pallets/h Equipment : Ring winder with 1 film roll Control : Siemens S7

Manufacturer: AIDA Type: NC2-160 Thrust: 160t Year of construction: approx. 1991 Stroke length: 130 mm Distance above the table: (adjustable) 235–335 mm Table: 2030 x 600 mm Plunger: 1500x600mm Electrical power: 3x200V(), 15kW - Japanese standard Net weight: 19000 kg Size: 2140 x 2210 x 3175 mm Fobmeu D Ad Ejrcu Idepb Automatic lubrication system. Automatic Cutting Oil Dosing – RAZIOL EST-02 Optionally with disc winder and straightener.

KHS Innofill DRS 168/24 with 168 filling valves an 24 head crown corker capacity: up to 72.000 bph year of manufacturing: 2014 pitch: 94 mm with HDE high pressure injection with shower for broken glass fixed for 0,33 and 0,5 ltr. bottles already dismantled and available in Germany

Transnorm conveyor belt GF 16600-700-600 RA2455 Technical data: Conveyor length (NL): 16600 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,35 Drive: SEW gear motor, R27 DT90S4/TH Electrical data: 50Hz V380-500, kW 0,5 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2001 condition: good (used) Conveying length in mm: 16600 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m / s ...

Stüer conveyor system Roller conveyors 16950-620-600 RA2456 Further information Manufacturer: Stüer Type: Roller conveyor Condition: good (used) Conveyor length (NL): 16950 mm, 6 elements between 1700 and 4200 mm, Roller width (RB): 600 mm Nominal/outer width (NB): 620 mm Frame height: 140 mm Overall height including motor: 240 mm Roller pitch: 75 mm Drive types: Head Load weight: up to 30 kg recommended Electrical data: 3x 300-500V Gear motor: SEW Conveying speed: 0.5 m/s Optionally available Frequency inverter for infinitely variable speed control Supports side guides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 380-415 condition: gut Conveying length in mm: 16950 Nominal / outside width in mm: 620 Roll width in mm: 600 Roll division in mm: 75 Driven: YES scope of delivery: mit Motor, without supports and side guides Für e ...

control: FIDIA PCN 775 : . x-travel: 1000 mm y-travel: 620 mm z-travel: 700 mm Axis: 5 Achsen simultan gesteuert weight: 12 t Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Aircooled chiller/heat pump Blue Box Epsilon Echos 16kW/18kW Cooling capacity: 16 kW (12/7 — 35°C) Heating capacity: 18 kW (40/45 — 7°C) Year of manufacture: 2017 Options: heat pump Heat exchanger: plate Refrigerant circuit: 1 pcs. Compressors: 1 pcs. Siam ( scroll, inverter) Type of refrigerant: R410A Number of fans: 2 pcs. Dimensions: 1.10 x 0.70 x 1.40 m Weight: 227 kg Working hours: 268 h Condition: excellent, new

Press brake Ermaksan AP 3100 160 good condition Type AP 3100-160 tons Capacity 160 tons Bending length 3100 mm Motor power 11KW Lowering speed 80 mm/s. Weight 9200 KG Width 2180 mm Length 3500 mm Height 2780 mm Hfjbqxieq Ewufem Iqjb The machine can be viewed at any time by appointment.

The machine is ideal for short lengths (30, 50 or 100m) either in full width, or you can also divide into different widths, from a maximum of 1600 mm. Thanks to the 4 take-up shafts, the machinist is able to unload and position a new sleeve while the machine is still winding. This brings an enormous amount of extra power at the end of the day, as there are only short downtimes. The machine is still in daily use and sample materials can be tested daily. We would then disassemble the machine, pack it and put it on a stable pallet. 20ft containers can be loaded via the ramp.

B&A REF: 9024 TON: 160 SCREW DIAMETER: 50MM SHOT WEIGHT: 343 STROKE VOLUME: 377CM3 INJECTION PRESSURE: 1892AR PLATEN SIZES: 710 X 660MM DBTB: 520 X 470MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 500MM MOULD OPENING STROKE: 450MM MAX DAYLIGHT: 950MM EJECTOR STROKE: 150MM CONTROLS: MC6 CORE PULLING: 2 AIR VALVES: 2 HEATING CAPACITY: 17.7KW ROBOT INTERFACE: EUROMAP 67 ROBOT: GIEGER TECNOMATIC SCREW DRIVE: ELECTRIC HOT RUNNER: 12 ZONE

Aquaflex Model LXP 1656 4 colors Print width 420 mm Year 1995 1 single-sided cutting station 3 watermark printing stations 1 UV printing station 1 weeding station 1 hot or cold air cooler Accessories: Cylinder 1 pc 93 1 pc 97 1 pc 101 1 pc 103 1 pc 104 1 pc 105 1 pc 115 1 pc 130 1 pc 135 Length: 7800 mm Width: 3600 mm Height: 2900 mm

Features of the facility 1. Chain conveyor belt 2 meters long (other lengths possible on request) 2. Adjustable bag former 3. Single Film Loader + Automatic Film Centering Device 4. Final sealing unit rotative, double-sealing jaw 5. Solid, medium fin sealing structure 6. Three servo control drives 7. HMI Control Panel 8. Two individual temperature controllers 9. 304 stainless steel body 10. Documentation in local language 11. Print mark control 12. Bag length programmable 13. Standard walking direction left to right Technical Parameters 1. Product length: L90-300mm 2. Product width: W30-160mm 3. Product height: H5-55mm 4. Packaging speed: up to 125 products/min (depending on product, bag length, material and number of sealing jaws) 5. Maximum film width: 370mm 6. Connection voltage: 1Ph. 220V 50Hz 7. General power: about 6.5kw 8. Machine weight: ...

Inv. Num. : 8913 Type: IRB 1600/1.45-8/M200 Producer: ABB Created: 2013 Parameters: Maximum arm reach: 1450 mm Number of axles: 6 pieces Maximum load capacity: 8 kg Machine weight: 250 kg

PART NUMBER 7660 SPECIFICATIONS - max range of machined diameters 160mm - min length of input material 750mm - machining allowance (on diameter) max 30mm - 33kW knife head drive motor - infinitely variable feed speed control on the inverter - feed motor about 2.2kW - Pneumatic actuators 7pcs In sequence: - 4 toothed pulling shafts - 3-knife head - 3 smooth pulling output shafts - dimensions l/w/h 3800x1100x2800mm - weight about 4000kg ADVANTAGES – French production – solid construction – pneumatic actuators (clamps) – used beaming machine – very good condition Net price: 85900 PLN Net price: 20452 EUR calculated at a price of 4.2 euros (With higher price fluctuations, the price may change.) Net price given for international transactions, EU clients with EU NIP (NIP) EU.

Reference ID PP-55982 Category: Rotary Die Cutter (RDC) Manufacturer Martin Model DRO 1628 Year Built 1998 Color 3 Max. size 2800 × 1600 mm Condition Good Location Europe Availability Immediately Machine Description Martin Prefeeder Vacuum feeder 3 Colours Rotary DieCutter (RDC) Waste elimination Stacker The first flexo is rubber roll, the other two are chamber system Ceramic roller data (table): Columns: Dro | Lc | Cm2 Nyomda 1 | 100 | 8.00 Nyomda 2 | 100 | 10.26 Nyomda 3 | 100 | 7.26

Type: MultiShaker 450/1600 Serial number: E050970405041 Year of construction: 2016 Width: 450 mm Length: 1800 mm Infeed height: 1350 mm Slith: 2 mm Power: 3 x 400V, 50Hz, 16A Dimensions: 1900 x 1100 x 1450 mm Weight: 860 kg

This 3-axis FAT FTM 165 horizontal turning machine was manufactured in 2018. Ideal for precision turning operations, it offers robust construction and reliable performance. Consider the opportunity to buy this FAT FTM 165 horizontal turning machine. Contact us for more information.

This 3-axis SPINNER MVC 1600-N was manufactured in 2016. Ideal for precision machining, this vertical machining centre ensures reliable performance and durability. Consider the opportunity to buy this SPINNER MVC 1600-N vertical machining centre. Contact us for more information.

This Dunkes HZS 160 Bending machine was manufactured in the year 2008 and has 2250 production hours. The machine is in good condition and well maintained.