fp 16 used for sale

weight max. in kg: 1600 kg fork length: 1150 mm stroke height: 4500 mm high: 2020 mm weight of the machine ca.: 0,92 t dimensions: 1,72 x 0,8 x 2,02 m Pallet truck with - Triplex mast - Lithium-ion battery - quick lifting and lowering - low overall height The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 160 mm clamping range: 230 mm clamping height: 52 mm weight: 18 kg Machine vice with turntable. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 1600 kg fork length: 1150 mm stroke height: 5000 mm high: 2185 mm weight of the machine ca.: 0,98 t dimensions: 1,72 x 0,8 x 2,2 m Pallet truck with - Triplex mast - Lithium-ion battery - quick lifting and lowering - low overall height The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

range L-W-H: 1680 x 470 x 1050 mm weight: 137 kg : 7 St. Internal dimensions of upper drawer 124.5 x 40 x 9.5 cm (WxDxH) Internal dimensions of medium drawers 78 x 40 x 6.5 cm (WxDxH) Inner dimensions of bottom drawer 78 x 40 x 14 cm (WxDxH) Interior dimensions of cabinet on the left including trash can 25 x 42.5 x 71 cm (WxDxH) Interior dimensions of cabinet on the right including shelf 41 x 42.5 x 54 cm (WxDxH) Maximum loadable weight 500 kg Worktop material wood Material of the drawer handles: aluminum Wheel material PP and PU Housing material metal Packed dimensions 1745 x 520 x 995 mm Packaging weight 136.5 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

connected load frequency: 230 V weight: 4,7 kg range L-W-H: 620 x 240 x 180 mm output: 0,8 KW grinding band dimension: 40 x 760 mm tube diameter max.: 180 mm band speed: 2,4 - 9,1 m/s Pipe grinding/finishing machine The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: M5 - M16 mm : 250 U/min. : 48 Nm air pressure: 6 - 8 bar working area: 150 - 1900 mm The pneumatically driven D-JSC tapping machine has, among other things, one Air motor with quick chuck and a stable and flexible Labor arm. The mounting arm can be attached directly to the work table using the mounting flange and is ready to work immediately. This means fast changeover times guaranteed. It is possible to simply tap the tap to the desired hole to be attached without having to position the component under the tap. Version with an adjustable angle, whereby the quick chuck can tilt so that horizontal tapping is also possible. Pneumatic tapping machines for M5 - M16 threads, angle adjustable. 6 pcs. Quick change chucks with slip clutch. Optional: - Clamping table with T-slots: 750x600x650mm or 990x700x800mm. - magnetic base. The data for this ad was created with ModulMWS - the  ...

weight max. in kg: 1600 kg fork length: 1150 mm stroke height: 4500 mm high: 2020 mm weight of the machine ca.: 0,92 t dimensions: 1,72 x 0,8 x 2,02 m Pallet truck with - Triplex mast - Lithium-ion battery - quick lifting and lowering - low overall height The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A complete packaging and palletizing line for buckets is available. 1) Vollenda 2VNES2-6-E bucket filling machine, year of manufacture: 2009, bucket formats: 2kg-5kg, filling capacity 2kg/5kg: 1200/800 buckets/h. 2) Palletizer Ehcolo EPL 160, year of manufacture: 2009, empty pallet magazine positions: 15, max. pallet dimensions X/Y/Z: 800mm/1200mm/1500mm, palletizing capacity 2kg/5kg pails: 800/1200 pails/h. 3) Wrapping machine Robopac Rotoplat 3000HD, year of construction: 2009, max. rotation speed: 12 rpm, max. wrapping height: 2400mm, power: 11kW, weight: approx. 1400kg. Documentation available. On-site inspection is possible.

Suitable for automatic polishing of all types of circular saw blades. Accessories: Coolant system with 60 l tank, Circular saw blade diameter: 80 - 800 mm, Rotary table speed in left or right rotation: 100 rpm, polishing wheel diameter: 250 mm, Buffing wheel bore diameter: 25 mm, Connected load approx.: 2.7kW (400V / 50Hz), Weight approx: 430 kg, Dimensions W x D x H approx.: 1160x1450x1350mm, colour: green

A drying oven Ernst Reinhardt GmbH, which was used in the twisting and tea bag industry for drying yarn bobbins, is available. Internal dimensions X/Y/Z: 1250mm/800mm/1500mm, volume: 1.5m³, heating capacity: 24kW, machine dimensions X/Y/Z: approx. 2200mm/1100mm/2500mm. On-site inspection is possible.

For spreading on a conveyor belt, including container, machine was not used.

A complete 8-color Fischer & Krecke flexographic printing system is available. Number of colors: 8, max. print width: 1250mm, max. material width: 1300mm, repeat print length min./max.: 320mm/800mm, max. mechanical speed: 360m/min, printable materials: PET (min. 12µm)/PP/OPP/LDPE/laminate materials. Inks: solvent-based, drying: thermal oil. Roll diameter: 800mm, core diameter: 76mm/152mm. Including BST Video Web Inspection System Premius, cleaning system Flexpress AutoClean (ACA), viscosity control Bloss Viscolor 1300, automatic roll change and rewind Flying Splice as well as an additional chill roll with a diameter of 460mm. Documentation available. On-site inspection is possible.

Volume flow: 4080m³/h, filter area: 34m², BIA category: G, differential pressure: 1650Pa, filtration surface load: 120m³/h-m², air density: 1.2kg/m³, operating temperature: 20°C. Documentation available. On-site inspection is possible.

A Gebr. Pfeiffer ball mill is available. Drive power: 330kW, diameter: 2400mm, length: 5000mm, number of motors: 2, motor weight: 180kg, flywheel width: 3.2mm. On-site inspection is possible.

diameter: 160 mm total power requirement: 0 kW Shipping weight: ca. 700 kg Packing: - mm Various chucks, jaws, tensioners etc - see photos The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A stacker and destacker cutter for the PCB industry is available. 1) Stacker for slotted cassettes Kuttler SUE 50, year of construction: 2008, running direction: right-left, operating hours (plate counter): 2.8 million, weight: approx. 800 kg. 2) Single stacker for slotted cassettes Kuttler RLE 160, year of manufacture: 2004, with conveyor belt CO 800, year of manufacture: 2008, running direction: right-left, operating hours (plate counter): 5.4 million. The system is missing cylinders and brackets for automatic format adjustment. Documentation available. On-site inspection is possible.

centre height: 160 / 180 mm Control: NC total power requirement: ? kW weight of the machine ca.: 120 kg dimensions of the machine ca.: 500 x 230 x 270 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1600 mm y-travel: 800 mm z-travel: 800 mm Control: CNC 432 total power requirement: 22 kW weight of the machine ca.: 17 t dimensions of the machine ca.: 5 x 3,70 x 3 m Nr. 2754 Universal bed milling machine MAHO MH 1600 S Spindle SK-50, Speed range up to 4000 min-1 Max. workpiece weight 3000kg 35,000 switch-on hours, 10,0 0spindle hours, Dimensions 5 x 3.70 x 3 m, Weight 16 tonnes. Automatic swivelling milling head, Fixed table 1800 x 980 mm, 36-fold universal tool changer, Internal coolant supply with paper belt filter, chip conveyor, manual control bar. Working area: 1600 x 800 x 800 Drive: 22 kW Control: Philips CNC 432 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 - 1600 mm y-travel: 250 - 800 mm z-travel: 350 - 800 mm Control: CNC weight of the machine ca.: 1,6 - 16 t dimensions of the machine ca.: - m MAHO - Package from stock clearance - Special price for sale 4 x milling machine -MAHO MH 400 C - CNC 432 -MAHO MH 700 C - CNC 432 -MAHO MH 800 T - CNC 332 -MAHO MH 1600 S - CNC 432 EXW - Ex works Bensheim / Lorsch Free lorry The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1600 mm y-travel: 900 mm z-travel: 800 mm control: HEIDENHAIN iTNC 530 for axes: 3 table surface area: 1700x850 mm tool magazin:: 30 spindle taper:: SK 40 spindle turning speed - stepless: 100-10000 U/min feeds infinitely variable to rapid traverse: 2-20000 mm/min voltage: 400 V dimensions of the machine ca.: 385x420x325 cm weight of the machine ca.: 18.6 t Coolant through spindle: pressure: 18 bar 3D measuring tracer: RENISHAW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

High-speed tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for pre-made tubes (with closed cap) made of plastic, aluminum or laminated composite material. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. External tube feed lift, water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lif ...

Vibration Feeder (volume ca. 160 l), infeed container for product with vibrating mechnism to supply product to infeed conveyor, stainless steel, L800xW880xH1100mm, 150/250kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Key data: 200 kN, 1600 mm

We are selling our SSIA 20/1600 broaching machine, which we are currently still using in production. The machine has a pulling force of 20,000 kg and a broaching length of 1,600 mm.

Offer 25995 Specifications: - Pressure capacity 1600 KN / 160 t - Pressure regulation 0 - 160 t - Stroke length approx. 0 - 600 mm -Max. Installation depth with straightening beam 1050 mm -Max. Installation depth without straightening beam 1400 mm - Lifting speed approx. 0 - 0.6 m/min - Tool height approx. 400 mm - Drive 380 V / 11 kW - Space requirement approx. W 3600 x H 1400 x D 1800 mm - Weight approx. 6500 kg - Accessories - height-adjustable side support rollers - Straightening tool for straightening long material - Straightening beam 1300 x 400 mm with over - Threaded spindle laterally adjustable rebearings

pressure: 160 t piston stroke: 400 mm diameter of piston: 300 / 185 mm throat: 225 mm table-size: 1150 x 350 mm speed of pressing: 166 mm/sec pre-running speed: 75 mm/sec return speed: 208 mm/sec weight: 26 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m - speed of pressing: 16 ...6 mm / sec - advance: 75 mm / sec - rapid return: 208 mm / sec - distance between plunger with ram and locators: 320 mm - distance between locators of piston and table: 50 ... 888 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 300... 1600 mm bore radius max./min: 1800 mm bore capacity in steel (diameter): 56 mm threading: max. 65 mm bore depth: 400 mm tool taper: MK 5 base plate: 1700 x 1000 mm turning speed range - drilling: 14...1800 U/min feed: 0,0315...1,6 m/min total power requirement: 4,5 kW weight of the machine ca.: 7,13 t dimensions of the machine ca.: m - distance Spindle head to base: max. 1600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Transnorm conveyor belt GF 16950-900-750 RA2213 Technical data: Conveyor length (NL): 16950 mm frame width (NB): 900 mm, 1000 mm with motor belt width (GuB): 750 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,25 Drive: SEW gear motor, R27 DRE80M4BE1/MM15/LN Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 16950 Nominal / outside width in mm: 900 Belt width in mm: 750 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 1,1/S1 Conveyor sp ...

pressure: 160 t chamfer lenght: 3050 mm distance between columns: 2550 mm table width: 220 mm column arm: 280 mm dayligth: 440 mm work stroke: max. 250 mm total power requirement: 22 kW weight of the machine ca.: 13 t - Hubgeschw. / speed of stroke: abwärts: down, 90 mm/s - Press down 11 mm/s - Aufw. / upward: 90 mm/s - Spez/specif.: 2-Hand/Fuss-Bedienung / 2 –hand foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spiral mixer, Fabr. Diosna, SP 160 D

band width: 850 mm total power requirement: 3,8 kW 5 to. Schleicher reel - max load: 5 to - Belt width: 1500 mm - Belt thickness: 1 mm - Year of construction: 23/04/92 - Voltage: 24/380 V 50 Hz - Power: 3,8 KW Including: Coil lifter, feed unit, control panel, hydraulic unit, control cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

NC Branch Hofmann RWNC 160 Tip height: 160 mm With tailstock

Dough machine stainless steel version Eberhardt Model: S 160 Kneading machine mobile with brake 2 LED timers Spiral mixer with 2 gears LED temperature indicator for max. 160 kg dough depending on the TA Flour dust hood only DGUV V3 tested by us Connection: 400 V, 8.55 kW, 20.5 A, 32A-CEE plug Used machine overhauled 3 months warranty + spare parts service Option: Service Package Maintenance contract Instruction & Commissioning Visit our large spiral mixer exhibition!

diameter: div. number: 16x tool adaptor: SK 50 Tool Package DS SK 50 Other quantities also possible! A total of approx. 600x SK 50 holder available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Niehoff slide-free drawing machine is available. Processing diameter: 5mm-15mm, drawing speed range: 6m/min-24m/min, gearbox: manual gearbox, machine dimensions X/Y/Z: approx. 2600mm/2200mm/4000mm, weight: approx. 6500kg. The gearbox was completely overhauled in 2019 with new gears and new bearings. A new external lubricating oil pump was also installed in the same year. Documentation available. On-site inspection is possible.

turning diameter over bed: 330 mm turning diameter over slide rest: 190 mm centre distance: 650 mm turning length: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 3-jaw chuck tool holder device tail stock Technische Daten / technical details: Spitzenweite / center to center 650 mm Dreh-Ø über Bett / turning diameter over bed 330 mm Dreh-Ø über Schlitten / turning diameter over sledge 190 mm Spindelbohrung / spindle hole 36 mm Drehzahlbereich / spindle speed 30-2500 UpM /rpm Antriebsleistung / drive capacity 2,2 kW Gewicht der Maschine ca. / weight ca. 600 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1600 t distance between columns: 3160 mm ram stroke: 1450 mm distance table/blankh.,max. stroke up,adjustm. up: 2250 mm table surface area: 4000 x 2200 mm ram pressure: 1000 t pressure of blank holder: 600 t stroke of blankholder at the bottom: 1000 mm stroke of blankholder with adjustment 0-100 mm: 1450 mm blank holder size: 4000 x 2200 mm die-cushion pressure inside the table: 360 t stroke of drawing cushion in table: 275 / 400 mm ram surface: 4000 x 2200 mm column travel -side: 1100 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled oil volume: 9000 l total power requirement: 390 kW weight of the machine ca.: 250 t dimensions of the machine ca.: 6,0 x 4,3 x 10,5 m Head press (1600 tons) of a press line with five subsequent presses (800 tons) The data for this ad was created with ModulMWS - the software solution of LogoTech o ...

bore capacity in steel (diameter): 80 ( 100 ) mm turning speeds: 20 - 1400 U/min spindle taper MT: 6 : Rechts- + Linkslauf quill stroke: 400 mm feed range - spindle: 0,045 - 1,5 mm/U arm length: 1600 mm workpiece height max.: 400 - 1800 mm base plate surface area: 1170 2185 mm accessories:: 2x Würfeltisch+Kühlmittel automatic clamping device electr.: Elektro - Mechanisch total power requirement: 14 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: 3 x 1,5 x 3,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, a test run is possible by prior arrangement. Lathe WEILER Praktikant 160 AC Year of Make: 1996 Serial Number: 4057 Circumferential diameter over bed: 320 mm Center width: 650 mm Circumferential diameter over support: 160 mm Spindle bore: 35 mm Speed range: 48 – 2500 rpm Drive power: 4 kW Dimensions (L x W x H): 500 × 1240 × 1550 mm Weight: 680 kg

General Information Product Type: High Flow Oil Cooler Application: Designed for cooling oil in large machinery Cooling Units: 3 identical condenser units (each can operate separately) Quantity: 2 pieces available Price: Per piece Technical Specifications Motor: Voltage: 380-420V / 660-720V Speed: 1460 rpm Ncsbmjv Edh Rjy Ex Ipsu Power: 11 kW Quantity: 2 pieces Cooling System: Number of Condenser Units: 3 (independent operation) Cooling Type: Oil cooling Key Features ✅ High Cooling Capacity – Built for large industrial machines ✅ Independent Operation – Each condenser unit can function separately ✅ Versatile Applications – Can be adapted for different uses ✅ Durable & Heavy-Duty Design – Engineered for continuous operation ✅ Multiple Voltage Compatibility – Works with both 380-420V and 660-720V power sources Typical Applications Hea ...

for sale is an Inter HST 165 - machine for applying hot melt glue and tear thread, built in 2018, Subject to prior sale, changes and errors!

EREMA 160 EXTRUSION LINE, with power consumption 350kW, Two Gail TK 1000 TG filter screens, agglomerator, Barrel with screw diameter 160 mm., Screw length 6.000 mm ca (2 x 3.000 mm.), Erema semi-automatic screen changer, Capacity 650-950 kg/h depending on materials and feeding rate., granulation head., Construction year 1995, in working conditions, many spares included, installed power - used power in work: about 60-65% : 350

Mazak VTC-41 L X: 1660 - Y: 410 - Z: 510 mm CNC X-axis: 1660 mm Y-axis: 410 mm Z-axis: 510 mm Table dimensions: 2000 x 410 mm Max weight on the table: 800 kg Depth of throat (uprights-spindlecenter): 460 mm Admission in spindle (ISO): ISO 40 Power on the spindle: 11/7,5/5,5 kW Drilling-capacity: max dia 25 mm Tapping-capacity: max M24 Control : Mazatrol Number of axes: 3 axes Toolchanger: yes Number of rotations: 7000 rpm Length: 3900 mm Depth: 3050 mm Height: 2700 mm Weight: 6 ton

grinding diameter: 250 - 1650 mm grinding length: 1000 - 8000 mm swing diameter: mm centre height: 1000 mm centre distance: 8000 mm grinding wheel size: 760/900 x 100 x 305 mm Control: Allen Bradley PLC workpiece weight max.: 75000 kg spindle drive: 66 kW grinding wheel turining speeds: 375 - 1125 U/min feeds of grinding head: 35 - 2600 mm/min grinding feed: 0,0025 - 0,05 mm/U total power requirement: - kW weight of the machine ca.: - t Rough Grinding, Finish, Fine & Superfinish Grinding Re-Conditioning Work Rolls and Back-Up Rolls Hard & Soft Rubber Rolls Machining of: Cylindrical, Convex and Concave Rolls of Various Materials 2018 Electrical Upgrade Allen Bradley PowerFlex Digital Drives 755 Allen Bradley 1609 SPO Ethernet Network Card Allen Bradley PLC - Continuous In-Feed Mechanism of the Grinding Wheel for Compensation of Wheel Ware - Dynamic Wheel Balancing - Electronic Vibration  ...

Inv. Num. : 8499 Type: PEKRS 160 Producer: IWK Created: 1970 Parameters: Table length: 2000 mm Table width: 1000 mm Maximum stroke rate per minute: 55 1/min Stroke: 8-180 mm Adjusting the ram: 110 mm

Nietmaschine / Riveting machine Hang 162-01Serial-No. 39709

weight: . kg warranty: . Mon Dimensions (HxWxD): . mm temperature: -50.0 to 1600 °C The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Haul-off for profiles, used and overhauled Manufacturer: Blake Type: 303-1600-180 Year of construction: 1995/2021 Serial-No.: 637 Contact length., effective: 1600 mm Gum pad width: 180 mm Design: smooth gum pads at the bottom and top Haul-off force: approx. 20,000 N Haul-off speed: 0.1 -5.0 m/min. Drive Motor: DC Shunt Motor Motor power: 5.0 kW Dimensions: 240 x 90 x 175 cm (LxWxH) Weight: approx. 950 kg Remark: The electrical control cabinet was renewed in 2021. The machine has been cleaned, repainted and checked for function. In addition, a new control panel as a remote control incl. 10 m long control cable.

Digital input module Siemens SM321 DI 16x24VDC Manufacturer: Siemens Series: SIMATIC S7-300 Module: SM321 Part Number: 6ES7 321-1BH00-0AA0 Type: Digital Input Assembly (DI) Inputs: 16 x 24 V DC Mounting Type: DIN Rail / DIN Rail Condition: used, dismantled from STAMA MC 325/S Dimensions: approx. 130 × 40 × 120 mm Weight: 0.28 kg Price plus VAT Pieces : 6

Inv. Num. : 8506 Type: VCE 1600 PRO Producer: MIKRON Created: 2012, GO 2023 Parameters: Control system: Heidenhein iTNC530 Switch-on hours: 67342 h Hours: 32684 h Work table length: 1700 mm Work table width: 850 mm Maximum table load (uniform): 2000 kg Maximum vertical spindle speed: 10000 1/min X-axis travel: 1600 mm Y-axis travel: 900 mm Z-axis travel: 800 mm GO 2023: New Linears Screws on the X and Y axes and new ruler on the Y axis

Two Battenfeld injection molding machines are available. 1) Battenfeld BA 1600, year of construction: 2001, clamping force: 1600kN, tie bar distance: 520mm/520mm, installation height min./max.: 225mm/550mm, opening stroke: 480mm, centering diameter: 160mm, screw diameter: 50mm, injection weight: 520g. 2) Battenfeld BA 500/200 CDK, year of construction: 1995, clamping force: 500kN, tie bar distance: 320mm/320mm, platen dimensions X/Y: 490mm/490mm, installation height min./max.: 150mm/350mm, opening stroke: 250mm, max. platen distance: 600mm, screw diameter: 35mm, injection volume: 134.7cm³, injection weight: 122.5g, injection pressure: 1484bar. Machine dimensions X/Y/Z: approx. 3800mm/1350mm/1800mm, weight: approx. 3200kg. The machine has cylinder problems with the screw and the forward/backward unit. Documentation available. On-site inspection is possible. Individual sale possible.