fp 16 used for sale

BAR : 1500 l/min : 52 KW: 160

A Dimeco Alipress coil-to-sheet line with decoiler, straightener, and shear is available. Sheet width range: 200mm-1300mm, sheet thickness range: 1mm-7mm, cross-section range: 1400mm²-3250mm², max. feed speed: 30m/min, max. stroke rate: 150/min, max. material feed: 1000mm/stroke, straightener: Schechtl MSB100. Documentation available. An on-site inspection is possible.

Single Column Press Dunkes TYPE: HZS 160 Specifications: Manufacturer: Dunkes Model: HZS 160 Operating hours: approx. 2250 The machine is in good condition and fully functional.

A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible.

Grinder Manufacturer: Kramer Grebe Wetter Model: Grinder 160mm Integrated lift for ergonomic operation Made of stainless steel Lowest noise level Easy cleaning Rated power: 36 kW Control voltage: 24/230 V Operating voltage: 400 V / 50 Hz Total nominal current: 63 A Fuse protection: 80 A

max diam 1830 , table diameter 1600 , sinumeric 840 d . 2 x vertical

An external whirling unit ProCon for external machining of threads and rotationally symmetrical shapes is available. Installation height: 180mm, motor power: 7.5kW, through hole of hollow spindle: 160mm, tilt angle right/left: 28°/45°, speed: 1800rpm, angular resolution: 0.1°, cutting circles: SK70/SK90, cutting circle pockets SK70/SK90: 4(6)/8, cutting circle bore SK70/SK90: 100mm/120mm, weight: approx. 120kg. Documentation available. An on-site inspection is possible.

screw ø:: 30 mm screw length:: 16D screw speedl:: -- U/min Condition: used, Specification: Extruder - used - screw diameter: 30 mm - screw length: L = 16 D - with feed roller - Extruder water tempered, - Cylinder and head one tempering zone - Feed section can be cooled or heated - Flow rate adjustable - Screw compression approx.: 1:1.2 - Spraying head for hoses and profiles - Various injection moulds are available - Extruder complete incl.: - Motor from Techno Drives, type: MD 321 MA Drive power: 5 kW, 360 V Motor current max.: 19.7 A N/max.: 1,750 rpm - Control cabinet mounted directly next to the extruder - Profile/tube extrusion head with clamp - Temperature control Extruder is mounted on a base plate - Mass pressure measurement and display available - Operating and display elements are installed in the switch cabinet - Mobile version  ...

Key data: 7370 KW, 9213 kVA, 11 V

Five (5) Surplus/Never use/Never Installed, Caterpillar 16CM32C, 7370 kW, 11,000v. 60 Hz. These units can burn Diesel, Gas Oil, Marine Gas Oils (MGO), Marine Diesel Oil (MDO). Year of Manufacturing of this power plant is 2009. The sale of these units include: Barring Gear, Air Intake System, Fresh Cooling Water System, Exhaust System, Diesel Oil System, Lubrication System, Air Starting System, Control Systems and more The generator is a GE Synchronous Generator, 9213 kVA, 7370 kW, 10 Poles, 720 RPM, 11,000v. 60 Hz. 0.8 P.F. IP54 IC81W. This unit comes with IMO Tier II certification and ABS certifications for the Heat Exchangers, Flexible Couplings, Diesel Engine and Generator. The shelf life of these units is over the five-year limit given by Caterpillar. Therefore, these units no longer have the Caterpillar Warranty. Unit is now ready for shipment.

approx. 10 pieces spring floor trolley, Zarges, 195 L – used - : Price per unit: 495.-€ (net), ex location! Minimum order 5 pieces! Manufacturer: Zarges Type: 40645, Suspension Floor Trolley W 161 Year of manufacture: unknown With push bar Item no. Inner Length (approx. mm) Inner width (approx. mm) Inner height (approx. mm) Outer Length (approx. mm) Outer width (approx. mm) Outer height (approx. mm) Set for payload (kg) Volume (liters) Weight (kg) 40645 1010 420 460 1060 470 800 30 195 21,0 equipped with 4 swivel castors in corner arrangement. Original price: approx. 1.500.-€ Condition: good Available: immediately Location: Attenweiler

Toyota LSV 1600

TECHNICAL SPECIFICATIONS Manufacturer: FRÄMBS & FREUDENBERG Description: Dewatering Screening Machine Type: "Roberg" 1600/5000/1 Available devices: 2 pcs identical Year of manufacture: unknown (90s) Screen length: 5,000 mm Screen width: 1,600 mm Number of screen decks: 1 pc. SPECIFIC COMMENT - No cracks, no deformations - Incl. outlet tray, drive and springs

Etuve, CO2 incubator Thermo Scientific, Internal dimensions (mm): 505x440 H 665, Number of shelves: 3, Maximum temperature (°C): 55°C , Sterilization temperature cycle (°C): 180°C , CO2 control: ± 0.1% , O2 control: ± 0.1% , Humidity: RH: >_93% @ 37°C

Grinder for mincing meat Manufacturer: Sind Voltage: 380 / 50Hz Power: 15kW Size: 1550x900x1300mm Weight: 493kg

turning diameter over bed: 330 mm turning dia. in gap: 400 mm turning length: 600 mm centre distance: 750 mm spindle turning speed range: 20 - 1000 U/min spindle bore: 25 mm 3-jaw chuck: Röhm, Ø 200 mm dimensions of the machine ca.: 2000 x 800 x 1500 mm weight of the machine ca.: 1200 kg Fixed bezel Turning bezel Turning center point Three-jaw chuck Röhm, Ø 200 mm, incl. inner and outer jaws Quick-change tool holder Original Multifix size B with 2 change holders Spindle brake Tailstock quill MK3 Machine feet Lathe chuck guard Chip guard Work light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

very good condition,

Case Puma 160 4WD tractor, Technical specifications:, - Year of construction: 2014, - Operating hours: 9150h, Engine & Performance:, - Engine: 6-cylinder, 6.7l turbo diesel, - Engine power: 160 hp (119 kW), - Max. power: 203 hp (151 kW)

Weber Waagenbau u. Wägeelektronik, Automatic scale for weighing, year of construction 1989, with Weber control Dialog 165V-SWA, year of construction 2001, max. 2.5 kg, used, Can be viewed on site beforehand,

Type Loedige TSHK-160/KGU-400 Serial No. 3901 Year of manufacturing 2004 Hotmixer 210 Liter Blj Uovzzw Ued Dvycsp Coolingmixer 391 Liter

WEBER buisextrusielijn inclusief: Bws Ud Dvysvryhyscsw WEBER DS 8.5 Elmepla zaag Battenfeld R200/6 Battenfeld V125

For sale is a Hyundai twin turret CNC lathe LM 1600 TTSY from 2023 with 1565 operating hours and 506 spindle hours., Features:, - High-performance, integrated spindle motor, - High productivity through simultaneous use of upper and lower turrets, - Robust BMT turret, - Multitasking is possible with the addition of a Y-axis to the upper turret (TTSY specifications)., - Integrated machining through synchronized control of main and counter spindles, - Design with hybrid guides: Combination of box guide (XY axis) and roller guide (Z axis), (Series LM1600/1800TT), Specifications:, - Max. turning diameter 230mm, - Max. turning length 705mm, - Main feed size 6 / Secondary feed size 6, - Drive type Built-in, - Spindle speed 6,000 rpm, - Spindle power 15/11 kW, - Spindle torque 208/140 Nm, - Travel distances (X1/X2/Z1/Z2/ZB/Y) 65/195/700/720/700/100 mm, - Rapid traverse (X1/X2/Z1/Z2/ZB/Y) 20/20/4 ...

For sale is a Hyundai twin-turret CNC lathe LM 1600 TTMS from 2023 with 1407 operating hours., and 343 spindle hours., Features:, - High-performance, integrated spindle motor, - High productivity through simultaneous use of upper and lower turrets, - Robust BMT turret, - Integrated machining through synchronized control of main and counter spindles, Specifications:, - Max. turning diameter 230mm, - Max. turning length 705mm, - Main feed size 6 / Secondary feed size 6, - Drive type Built-in, - Spindle speed 6,000 rpm, - Spindle power 15/11 kW, - Spindle torque 208/140 Nm, - Travel distances (X1/X2/Z1/Z2/ZB) 65/195/700/720/700 mm, - Rapid traverse (X1/X2/Z1/Z2/ZB) 20/20/40/40/40 m/min, - Lead type LM, - Number of tools: 2 x 12 pieces, - Tool size 20/32 mm, - Milling spindle speed 5,000 rpm, Subject to prior sale, changes and errors!

screw ø:: 90 mm screw length:: 16D screw speedl:: ca. 40 U/min drive power:: 48,5 kW Condition: used, overhauled to order, including warranty, including CE marking Specification: extruder – used with feed roller - Screw diameter: 90 mm - Screw length: L = 12D - Screw speed approx.: 40 rpm - Motor rated power: 48.5 kW - Belt drive, number of belts: 5 - Number of heating/cooling zones: 4 - Voltage: 3x 380V, 50Hz, N For further details, please refer to the attachment. Price on request, depending on design and customer requirements The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suction unit: 16, load capacity: 1200kg, crane eyelet: 90mm/160mm, suction pad diameter: 315mm, suction pad type: P200-50, suction pad swivel: 6°, height compensation: 50mm, number of vacuum gauges: 5, vacuum gauge diameter: 100mm, pump capacity: 25m³/h, vacuum pressure: 850mbar. Machine dimensions X/Y/Z: approx. 8500mm/900mm/1500mm, weight: approx. 720kg. Documentation available. On-site inspection possible.

General SKU362T1083 MakeBAV Maschinenbau GMBH LocationBarneveld TypeBHV/400 Main Features MaterialStainless steel Volume400 Ltr. Motor18.5 KW Rotor150 mm Specified Features - Processing vessel Continuous reactorcheck Rotor sizesDia. 150x220m InletDN125 OutletDN 65, DN 40 Number of stages:1 Max. temperature10/90 °C Motor18,5 kW, 400 Volt With frequency controllercheck With vesselcheck CapacityBruto: 400 Ltr. , Netto 330Ltr. Processing vessels MaterialStainless steel 1.4571 (316Ti) General No.R07-268 Year of construction12/2007 Mounted on framecheck With switchcheck With switchgear(as is) Floorspace1,5x2,5 m Total height2,5 m Weight1480 kg Extra SpecificationsUnused after reconditioningGeneric medicinesOintmentsBiotechnologyPlastic & polymersDetergent & surf.CosmeticsFood additivesLubricants & oleoConfectioneryBiopharmaceuticalAPIProcessing vesselsBAVIndus ...

General SKU354T991 MakeRuberg Mischtechnik KG LocationBarneveld Pressure Working pressure jacket3 Bar Main Features MaterialStainless steel Volume10 Ltr. Motor11 KW Specified Features - Paddle mixer Continuous mixercheck Useful capacity± 10 Ltr. Trough sizesDia: 140x940 mm InletDia: 64 mm OutletDia: 75 mm With jacketcapacity 10 Ltr. Max. temperature110 °C Glands air purgedcheck Motor11 kW, 400 Volt, 2950 rpm MaterialStainless steel 1.4301 (304) With jacketcheck General No.RMG 10/1647 Year of construction2000 Mounted on framecheck With switchcheck With switchgear( as is) Floor space2,8x1,1 m Total height1,9 m Weight700 kg Extra SpecificationsComes with an additional pin rotor.Powdered foodsGeneric medicinesStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants  ...

General SKU366W1288 LocationBarneveld MakePeter Vossen Main Features MaterialStainless steel Volume160 Ltr. Specified Features - Horizontal tank Horizontal tankcheck Capacity160 l. Sizesdia. 500x1000mm Dished frontscheck Top connectionscheck OutletDia. 50 mm MaterialStainless steel 1.4552 With jacketcheck General No.8340 Year of construction1989 Mounted on legscheck Floorspace1,0x0,50 m Total height0,60 mOils & fatPaints & coatingsGeneric medicinesOintmentsFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyAnimal feedOther feedConfectioneryBeveragesDyes & pigmentsAPIMinerals & inorganicHorizontal tanksPeter VossenIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsIndustries > Pharmaceuti ...

General SKU203W025 MakeCuno Type16ZPB1 No.274413 Year of construction2004 LocationBarneveld Pressure Working pressure5 Bar Vacuum possiblecheck Main Features MaterialStainless steel Specified Features - Horizontal plate filter Plate filtercheck Horizontalcheck Without platescheck Top connectionsDN Liquid outletcheck Max. temperature90°C MaterialStainless steel 1.4404 (316L) General Mounted on wheelscheck Floorspace1,15x0,65 m Floor space1,15x0,65 m Total height1,90 m Weight125 kg CEcheck Extra SpecificationsDesign pressure-1/10 bar, test pressure 16 bar, operating pressure 5 bar, design temperature 0-90°C, operating temperature 0-60°C, volume 60 l.In and put DN40vessel dia. 450 mm,&:nbsp: No filterplates included.Fine chemicalsOther chemicalBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesCosmeticsFood additivesAnimal feedSolid p ...

General SKU207S028 LocationBarneveld CEcheck Pressure Working pressure18 Bar Main Features Heating (medium)Electric Capacity1.2 KW Temp.80 °C Specified Features - Temperature control unit Temperating machinecheck Electric heatingcheck Heating capacity-15/80 °C Electric capacity1,2 kW With coolingcheck Capacity0,25 - 1,45 kW (Ethanol) Temperature-10/20 °C (Ethanol) Tank capacity8-11 Ltr. With pump(Immersion Pump) Capacity28 Ltr./min MaterialStainless steel General MakeJulabo TypeFC-1600T Mach.No.10255538 Floorspace0,5x0,6 m Total height0,5 m Weight70 kgOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pharmaceuticsTemperature control un ...

General SKU290S402 MakeF. Widmann &: Sohn Apparatebau (D) Type160 Ltr. No.1346B-3 Year of construction1966 LocationBarneveld Pressure Working pressure jacket4 Bar Main Features MaterialStainless steel Volume160 Ltr. Specified Features - Cooking pan Cooking vesselcheck Capacity160 ltr. Vessel sizesdia. 680x600mm With jacket31 ltr. Without motorcheck Vessel can be tiltedcheck MaterialStainless steel 1.4541 (321) With jacketcheck General Floorspace1,4x1,1 M Total height1,0 M Weight150 KgAgrochemicalsCooking pansFeed additivesFood additivesAnimal feedOther feedConfectioneryF. Widmann & Sohn ApparatebauIndustries > Chemical > AgrochemicalsStirring vessels > Cooking pansIndustries > Food & Feed > Feed additivesIndustries > Food & Feed > Food additivesIndustries > Food & Feed > Animal feedIndustries > Food & Feed > Other feedIndustries > Food & Feed > ConfectioneryBrand ...

General SKU207S030 LocationBarneveld MakeJulabo Pressure Working pressure18 Bar Main Features Heating (medium)Electric Capacity1.2 KW Temp.80 °C Specified Features - Temperature control unit Temperating machinecheck Electric heatingcheck Heating capacity-15/80 °C Electric capacity1,2 kW With coolingcheck Capacity0,25 - 1,45 kW (Ethanol) Temperature-10/20 °C (Ethanol) Tank capacity8-11 Ltr. With pump(Immersion Pump) Capacity28 Ltr./min MaterialStainless steel General TypeFC-1600T Mach.No.10148820 Floorspace0,5x0,6 m Total height0,5 m Weight70 kgOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pharmaceuticsTemperature control unitsCosmet ...

General SKU434W1401 LocationBarneveld MakeFerrum TypePUR-1600 H Main Features MaterialStainless steel Inlet diameter60 mm Specified Features - Basket centrifuge Basket centrifugecheck Capacity800 l. Basket sizesDia. 1600x800 mm Max. loading weight1000 kg With bottom dischargecheck Liquid outletDN200 Without motorcheck Max. basket speed0-750 rpm MaterialStainless steel 1.4401 (316) General No.47-1366 Year of construction1986 Mounted on foundation platecheck Floorspace3,20x2,50 m Total height3,10 m Weight10.000 kgPowdered foodsGeneric medicinesFine chemicalsStarchOther chemicalBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesE-waste & metalFood additivesSugarConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalAPIBasket centrifugesMinerals & inorganicFerrumIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical >  ...

General SKU207S033 MakeJulabo TypeFC-1600T LocationBarneveld Pressure Working pressure18 Bar Main Features Heating (medium)Electric Capacity1.2 KW Temp.80 °C Specified Features - Temperature control unit Temperating machinecheck Electric heatingcheck Heating capacity-15/80 °C Electric capacity1,2 kW With coolingcheck Capacity0,25 - 1,45 kW (Ethanol) Temperature-10/20 °C (Ethanol) Tank capacity8-11 Ltr. With pump(Immersion Pump) Capacity28 Ltr./min MaterialStainless steel General Floorspace0,5x0,6 m Total height0,5 m Weight70 kg CEcheckOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pharmaceuticsTemperature control unitsCosmeticsE-wast ...

General SKU207S034 MakeJulabo TypeFC-1600T Mach.No.10148819 Pressure Working pressure18 Bar Main Features Heating (medium)Electric Capacity1.2 KW Temp.80 °C Specified Features - Temperature control unit Temperating machinecheck Electric heatingcheck Heating capacity-15/80 °C Electric capacity1,2 kW With coolingcheck Capacity0,25 - 1,45 kW (Ethanol) Temperature-10/20 °C (Ethanol) Tank capacity8-11 Ltr. With pump(Immersion Pump) Capacity28 Ltr./min MaterialStainless steel General LocationBarneveld Floorspace0,5x0,6 m Total height0,5 m Weight70 kg CEcheckOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pharmaceuticsTemperature control un ...

OVERHAULED - Size: 1.600 x 2.000 mm - With Electrical motor and springs.

General SKU207S024 LocationBarneveld CEcheck Pressure Working pressure18 Bar Main Features Heating (medium)Electric Capacity1.2 KW Temp.80 °C Specified Features - Temperature control unit Temperating machinecheck Electric heatingcheck Heating capacity-15/80 °C Electric capacity1,2 kW With coolingcheck Capacity0,25 - 1,45 kW (Ethanol) Temperature-10/20 °C (Ethanol) Tank capacity8-11 Ltr. With pump(Immersion Pump) Capacity28 Ltr./min MaterialStainless steel General MakeJulabo TypeFC-1600T Mach.No.10148818 Floorspace0,5x0,6 m Total height0,5 m Weight70 kgOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pharmaceuticsTemperature control un ...

Size: 1.600 x 5.500 mm - Decks: 2 - Included Electrical motor and springs - Will be overhauled, sandblasted and painted

General SKU212T501 MakeBarriquand TypeIXAP 5+4/8x1 x 1000 x 160 No.213712 B Year of construction2001 Mounted on legscheck Pressure Working pressure10 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface1.9 m2 Size length1000 mm Sizes width160 mm Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface1,9 m² CapacityCircuit A (water): 5 Ltr, Circuit B (product): 20 Ltr. Number of platens9 ConnectionsDN25 (4x) Max. temperature-10/200 °C MaterialStainless steel 1.4571 (316Ti) General LocationBarneveld Floorspace1,25x0,4 m Total height1 m Weight350 Kg Extra SpecificationsThe Barriquand IXAP 5+4/8x1 x 1000 x 160 is a versatile plate heat exchanger designed to facilitate efficient heat transfer across various applications. It operates through two distinct circuits, A and B, each catering to specific needs.Circuit A, w ...

General SKU437W1434 LocationBarneveld CEcheck MakeMLS GmbH Main Features Motor2.5 KW Specified Features - Miscellaneous Motor2,5 kW, 230 volt With jacketcheck General TypeEthos 1600 Mach.No.123 840 Year of constructionunknown Floor space1,0x0,70 m Total height0,75 m Weight80 kg Extra SpecificationsLab microwave for synthesereactionsuction cap. 108 m3/hwith Lab control terminal,&:nbsp:Alldos vacuum pumpOils & fatMiscellaneousConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubb ...

OVERHAULED - Size: 1.600 x 1.200 mm - 2 Pcs. SE 1,5 / 4 (0,8 kW / 1.400 RPM) (220 / 380V. - 3,7 / 2,15A) Unbalance Motors - Rubber protection

General SKU445W1547 LocationBarneveld CEcheck MakeVacuubrand Main Features MaterialStainless steel Volume11000 Ltr. Motor0.9 KW Specified Features - Vacuum pump Pumpcheck Number of pumps:1 Capacity11.6 m3/h With motor230 volt General TypeME 16C Mach.No.2638020200 Year of construction2004 Floorspace0,50x0,30 m Total height0,25 m Weight50 kg Extra SpecificationsPressure 80 mbar, With Festo stainless steel tank, volume 10 ltr.Oils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherVacuum pumpsSolventsDetergent & surf.Other pharmaceuticsCosmeticsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharma ...

OVERHAULED - Power: 10,9 / 7,2 kW - Amperage: 49,3 / 32,5A - Voltage: 220V. DC - L x W: 1.600 x 1.300 mm - Conveyor belt: 1.400 mm - AA.: 2.530 mm - With Transformator rectifier from 380V. AC to 220V. DC - Overband separator is sandblasted and painted.

General SKU445W1546 LocationBarneveld CEcheck MakeVacuubrand Main Features MaterialStainless steel Volume19000 Ltr. Motor0.7 KW Specified Features - Vacuum pump Pumpcheck Number of pumps:1 Capacity19.3 m3/h With motor200-230 volt, (Ex) General TypeME 16C NT Vario Mach.No.37057702 Year of construction2013 With switchcheck Floorspace0,60x0,25 m Total height0,35 m Weight50 kg Extra SpecificationsPressure 70 mbar, With Festo stainless steel tank, volume 10 ltr.Oils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherVacuum pumpsSolventsDetergent & surf.Other pharmaceuticsCosmeticsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuti ...

Power: 56,1 kW - Amperage: 173 A - Voltage: 300V. DC - 100% ED Magnet L x W: (1.800 + 2 x 450=) 2.700 x 1.600 mm - Conveyor belt: 1.600 mm - AA.: Ca. 4.500 mm

General SKU373X904 MakeAse Apparatenbau GmbH LocationBarneveld Type16 m² Tantal Pressure Working pressure shell8 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Surface16 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface16 m² Tube capacity100 Ltr. Number of tubes:62 Tube diameter20 mm Tube length3000 mm Max. temperature-30 / 200 °C Shell capacity153 Ltr. Shell diameter300 mm Shell length3700 mm Max. temperature-30 / 200°C Shell connectionsDN110 Cover connectionsDN200, DN110, DN60 MaterialStainless steel 1.4571 (316Ti), Tantalum General No.00093 Year of construction2000 Floorspace3,72 x 0,55 m Total height0,75 m Weight580 kg Extra SpecificationsMaterial tubes HII/TantalOils & fatPaints & coatingsGeneric medici ...

Engine Brand: MTU, Conditie: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: Grey , Engine Condition: Core , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/mtu-16v4000g83l-used/829, , = More information =, , Type: Engine, Empty weight: 8.400 kg, Type number: 16V4000G83L

Manufacturer: Hans Schoen Model: NH 160 Year of Manufacture: 1988 rebuilt in 2016 The press is being sold without tools or spare parts. Technical Data Press force max.: 1,600 kN Main drive power: 30 kW Speeds Rapid advance from: 300 mm/sec Pressing speed: 18 mm/sec Rapid return: 300 mm/sec Strokes Max. stroke: 150 mm Max. daylight opening: 450 mm Table and Ram Dimensions Ram area: 730 × 560 mm Table area: 650 × 650 mm Openings Front vertical opening: 750 mm Side vertical opening: 250 mm Heights Table height above floor: 850 mm Table bore diameter: 150 mm Ram bore, Ø H7: 60 mm T-slots T-slots in table, DIN 650 H12 diagonal: 22 mm T-slots in ram, DIN 650 H12: 22 mm Two pieces, front to back Machine Dimensions Machine footprint approx.: 1,850 × 1,500 mm Machine height approx.: 2,850 mm Find more here - .ucymachines/ Contact us at - sales@ucymachines

A lifting tipper from Masz Gliwice is offered on behalf of the customer. The tipper is about 360cm high and tilts at about 210cm (see photo Rheon). Since there is no test book or similar, the tipper may not be used in Germany and must be welded in one place. The condition is otherwise very good. The mount is for a Diosna SP160 AD tank car. The machine is dismantled at the bakery and can be picked up there.

Engine Brand: MTU, Conditie: CORE, Nominal Power @ Nominal Rpm: 2150 Kw, Nominal Rpm @ Nominal Power: 2000 Rpm, Engine Cooling Type: External Exchanger (eg. Keel Cooled) , Engine Color: Grey , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Watercooled , ECU Present?: yes , Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/mtu-16v396-te94-2150-core/ 413, , = More information =, , Type: Engine, Type number: 16V396-TE94-2150; Transport weight [kg]: 6500

Engine Brand: MTU, Condition: NEW, Engine Cooling Type: Exchanger (on engine) , Engine Color: Red , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/pumps/mtu-16v4000-pump-3600m3-hr-used/178 90, , = More information =, , Empty weight: 12.100 kg, Height: 3000 cm, Type number: 16V4000 POMP 3600M³/HR