126,701 used machines on RESALE, but how to find them? Machine Search
Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Manufacturer: Mann Filter, micro Top Air Filter Type C 17 160 Ovp -Number: 3x air filters included -Price: per piece -Packaging dimensions: 180/180/H230 mm -Weight: 1.1 kg/pc.
Tailstock, counter bearing for dividing head, dividing attachment, lathe -Handover: in the current condition as seen -Bracket: cracked, see photos -Tailstock: center height adjustable, 155 to 165 mm -Dimensions: see the drawing in the photos -Dimensions: 430/175/H210 mm -Weight: 21.7 kg
Liebherr slide-in gearbox from old stock ! As good as new MPS 45X21. 1X25.97 Bosch Rexroth : ZHP5 . 23-0356 . 10014 MNR : 1695745 CMAN / CMIT Item number: 1695745
Key data: 1250 mm, 900 mm, 8000 mm
The largest diameter of the processed product in mm: above the bed 1250 above the caliper 900 Distance between centers in mm 8300 The largest weight of the installed product in kg is 30,000 The number of spindle speeds is 3 The limits of the number of revolutions of the spindle in minutes are 3.15—200 Number of pitches: longitudinal 18 transverse 18 Feed limits in mm/rev: longitudinal 0.16-8 transverse 0.1-5 Number of calipers 2 The angle of rotation of the upper part of the caliper is ±90 degrees The power of the main electric motor is 60 kW Dimensions of the machine (length X width X height) in mm 15200X2500X2060 Weight 53.4 tons
Dosing bunker with chain belt discharge Manufacturer: HUBER Fördertechnik Type: RHKG160/8AA Year of Make: 2001 specifications: Machine dimensions: Length: 8,500 mm, Width: 2,400 mm, Height: 2,500 mm Center distance: approx. 8,000 mm Conveyor width: 1,600 mm Side wall height: approx. 1,550 mm Capacity: approx. 20 m³ Drive power: 0.75 kW for the conveyor belt Drive power: 4.0 kW for the dosing station
Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, clamping angle with three-jaw chuck, clamping angle with lathe chuck -Rotary table: with three-jaw chuck -Mouth size: Ø 160 mm -Spindle bore: Ø 42 mm -Dimensions: 510/320/H220 mm -Weight: 50.9 kg
Power strip, portable power strip, solid rubber power strip, adapter, construction site power strip -Manufacturer: Gifas, solid rubber distributor adapter 63A / 16A -Transport dimensions: 230/230/H130 mm -Weight: 3 kg
Power strip, portable power strip, solid rubber power strip, adapter, construction site power strip -Manufacturer: Gifas, solid rubber distributor adapter 32A / 16A -Type: 2800 Item No.: 282/301657M/303259/6 -Transport dimensions: 230/230/H130 mm -Weight: 3 kg
Log band saw Canali Braun 1600 round timber feed wagon saw roller conveyor year of construction.1994 new control
Complete plant Bogli 1600 round timber feed saw wagon roller conveyor shearer
Welding fume filter, welding fume extraction, flexible extraction arm -Manufacturer: MIG O MAT, welding fume extraction -Extraction fan: Motor Elmot 1.1 kW -Extraction arm: length 5700 mm -Tube: Ø 160 mm / inner Ø 145 mm, see photos -Transport dimension: 2900/100/H470 mm -Weight: 165.5 kg
Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: with T-slots, heavy-duty version -Material: Cast iron -Groove width: 20 mm -Groove spacing 69 mm -Dimensions: 245/165/H130 mm -Weight: 15.1 kg
Palettenheber / Pile Hoists - Stack Lift Baumann NUP 1600 Baujahr / Year 2005 - Serial-No. 52970 Format / Size max. 1500 x 1185mm Hebekapazität / Loading capacity max. 1600KG Hubhöhe / Lifting height max. 1400mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Control cabinet socket, Schuko socket -Manufacturer: Murr Elektronik, safety socket 16A / 250V -Type: 67950 -Number: 2x safety socket available -Price per piece -Dimension: 80/45/H70 mm -Weight: 0.1 kg/pc.
thermal switch, circuit breaker, electric circuit breaker, thermal switch, temperature switch, thermostat controller -Thermal switch, thermostat regulator, unused orig -Type: 662 029 160 -Number: 6x controller available -Price per piece -Dimensions cardboard: 100/80/H80 mm -Weight: 0.1 kg/pc.
thermal switch, circuit breaker, electric circuit breaker, thermal switch, temperature switch, thermostat controller -Thermal switch, thermostat regulator, unused orig -Type: 662 029 160 -Number: 1x controller available -Price per piece -Dimensions cardboard: 100/80/H80 mm -Weight: 0.1 kg/pc.
Pneumatic cylinder, air cylinder, pneumatic stamp, compact cylinder -Manufacturer: Metal Work, compact cylinder tray sealing machine Inauen VC999/ TS 1200 N -Type: 121AA20160ZP -Stroke: 160mm -Piston: Ø 120 mm -Piston rod: Ø 32 mm / M27 x 2 -Dimensions: 445/135/H135 mm -Weight: 9.6kg
Workbench, work table, assembly bench -Workbench: with drawers, solid design -Width: 1600mm -Depth: 710mm -Height: 925mm -Drawers/cabinet doors: lockable / without lock/key, see photos -Weight: 115 kg
Key data: 1120 mm, 345 mm, 550 mm
Table width 400 mm, table length 1600 mm Tool holder SK 50 Speed range 28-1400 rpm Feed range 16-800 mm/min Travel x 1120 mm ; y 345 mm; z 550 mm Connected load approx. 14.5 kW Accessories: 2 counter bearings Electric clamp horizontal and vertical spindle Vertical milling head SK50 with snap bearing
Electric motor Manufacturer : VEM Model: K21R K21R 160L 4 TWS HW Power: 11 kW NEW, unused from old stock see pictures for more details.
Key data: 128 KW, 160 kVA
We currently offer: Number 29 Perkins 1300 generator set Generator Stamford Power: 160 KVA / 128 KW Hz 50 RPM 1500 ABR Control SX460 IP 22 Year of manufacture 1997 Hours: 8234 Connection 63A, 32A Metrics: L: 4.00m W: 1.35m H: 2.00m Weight: approx. 3500 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242
V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley 4 grooves 160-4 -V-belt width: 13 mm -Receptacle: Ø 55 mm taper bushing 2517-55 (can be changed) -Quantity: 1x V-belt pulley available -Dimensions: Ø 167 x 65 mm -Weight: 5.8kg
External vibrators Vibrators vibrating motor Manufacturer: Knauer Engineering Type: NZHF 160 1650 W As good as new The product is in good condition Nevertheless, this is a used items, which shows signs of wear, or may have. see pictures for more details.
Electric motor Manufacturer : VEM Model: K21R 160 M4 Power: 11 kW NEW, unused from old stock see pictures for more details.
V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley 5 grooves type SPA 160x5 2517 -V-belt width: 13 mm -Receptacle: Ø55 x 45 mm taper clamping bushing 2517 (can be changed) -Dimension: Ø165 x 80 mm -Weight: 6.3kg
Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Clamping surfaces: 300 x 160 x 20 mm / 300 x 200 x 30 mm -Dimensions: 300/160/H200 mm -Weight: 18 kg
Details Turning diameter 165 mm Turning length 1000 mm Total power requirement 2 kW Turning diameter over bed 335 mm Rotary diameter via tool carriage 310 mm large turning diameter via cross slide 168 mm Bed width 250 mm Main spindle diameter 42 mm Main spindle nose CAMLOCK n-5 - DIN 55027 Morse taper 4 Spindle speeds 9 Speed range: 60-2000 rpm max. working feed 0-5000 mm/sec Rapid traverse 5 m/min Shaft diameter 48 mm Tailstock-Spindle Travel 140 mm Machine weight approx. 1100 kg Control CNC Control Name FANUC 21i/210i
Haul-off for profiles, used and overhauled Manufacturer: Blake Type: 303-1600-180 Year of construction: 1995/2021 Serial.-No.: 637 Contact length, effective: 1600 mm Pad width: 180 mm Design: smooth pads at the bottom and top Haul-off force: approx. 20,000 N Hail-off speed: 0.1 -5.0 m/min. Drive Motor: DC Shunt Motor Motor power: 5.0 kW Dimensions: 240 x 90 x 175 cm Weight: approx. 950 kg Remark: The electrical control cabinet was renewed in 2021. The machine has been cleaned, repainted and checked for function. In addition, a new control panel as a remote control incl. 10 m long control cable.
Key data: 520 mm, 520 mm
Parotec Face Plate Pallet PowerGrip 160 Stitch Partool Zero Point Clamping System Face plate custom-made by a sister company von Schunk. Such a face plate for the Parotec is not available for sale. Very good used condition. Various milling on the top, see pictures the dimensions can be found in the pictures. Weight approx. 50kg. There are other Parotec accessories in stock Other used interchangeable plates, a steel groove plate, You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice.
Shell end milling cutters, milling cutters, milling cutters, shell milling cutters -Manufacturer: WMW, shell milling cutter, milling cutter type N 9960 -Size: 160x63x50mm -Receptacle: Ø 50 mm -Dimensions of box: 175/175/H100 mm -Weight: 5.9 kg
Key data: 318 t, 318
Parotec Face Plate Pallet PowerGrip 160 Stitch Partool Zero Point Clamping System Face plate custom-made by a sister company von Schunk. Such a face plate for the Parotec is not available for sale. Very good used condition. Various milling on the top, see pictures the dimensions can be found in the pictures. Weight approx. 50kg. There are other Parotec accessories in stock Other used interchangeable plates, a steel groove plate, You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice.
Printing pad, printing pad for pad printing machine -Manufacturer: Teca-Print, printing pad for pad printing machine -Type: 597 Ø 165 mm -Receptacle: M16 -Quantity: 3x printing pads available -Price per piece -Total dimensions: Ø 165 x 150 mm -Weight: 1.7kg/piece
Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 160 -Throw: 110 mm -Punching capacity: 3mm -Matrix: Ø 43 mm -Dimensions: 225/60/H150 mm -Weight: 6.6 kg
Key data: 318 t, 318
Parotec Slot Plate Pallet Power Grip 160 Stitch Partool Zero Point Clamping System Very good used condition. the dimensions can be found in the pictures. Weight approx. 30kg. There are other Parotec accessories in stock More used interchangeable plates, one face plate D.52cm You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice.
Transnorm belt curve conveyor right GKF 90°-1300-1100-IR900 -- NEW RA2332 Technical data: Frame width (NB): 1300 mm Frame width with Bearing cover: 1400 mm Frame width with Bearing cover and gearbox (MB): 1500 mm belt width (GuB): 1100 mm height (BH): 160 mm height motor below: 360 mm height including motor (MH): 520 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees middler conveying speed (v m/s): 1,5m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 2.2 / S1 Belt: KT 96 new Year of construction: 2021 Optionally available: Supports Sideguides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2021 condition: new Nominal / inner radius in mm: 900 Nominal / outside width in mm: 1300 Belt width in mm: 1100 angle: 90° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive ...
Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt rollers: transport rollers diameter 60 mm -Total length: 1680 mm -Recordings: M10 -Quantity: 1 piece available -Dimensions: Ø 60 x 1680 mm -Weight: 7.1 kg
Specifications: X-axis 1,600 mm Y-axis 700 mm Z-axis 800 mm Spindle power 25 kW Spindle speed 100 – 14,000 rpm. Tool holder HSK 63-A Control: CNC SIEMENS Sinumerik 840D Table dimensions 520 x 700 mm Max. table load 800 kg B-axis 360 A° Weight approx. 17,500 kg
HAAS EC-1600ZT CNC machining center was built in 2020 in the United States by the renowned brand HAAS AUTOMATION INC. Designed for machining of heavy workpieces weighing up to 4536 kg, the machine is the ideal combination of functionality, productivity and precision. In order to meet this challenge, the machine is equipped with a wide range of equipment such as a rotary table (4th axis), a two-stage spindle and a capacious magazine with automatic tool changer. The HAAS EC 1600ZT CNC horizontal machining center weight approximately 13472 kg. Technical specifications of the HAAS EC-1600ZT milling center - feed in the X/Y/Z axis: 1626/1270/1016 mm - feed in the B axis: 360° - rapid traverse in the X,Y,Z axis: 15.2 m/min - work table surface (L x W): 1626 x 914 mm - clamping plate diameter (rotary table): 762 mm - maximum workpiece weight: 4536 kg - maximum spindle rotational spee ...
Generators with diesel engine Manufacturer: MTU Type: 16V2000 Year: 2009 Hours: 8017 Power: 1125 kVA Cooling: Water with front-mounted radiator Speed: 1500 1/min Tank: approx. 1250 liters Generator: Leroy Somer LSA 50.2S4 C 6S/4 Voltage: 400/231 V, 50 Hz Equipment: Soundproofing hood with cooling, exhaust system, expansion joints, oil drip pan, manual and automatic switchgear, documentation. Subject to prior sale - errors possible! Internal reference number: E-1004-92
Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: Nord, gear motor -Gearbox: Type 73F VL-160 L/4 i= 37.63 -Speed: 39 rpm -Engine: Type SK 160L/4 -Power: 15 kW / 1460 rpm -Shaft: Ø 75 x 140 mm -Dimensions: 1060/400/H540 mm -Weight: 279 kg
Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KMER 160 L4 -Power: 15 kW -Speed: 1455 rpm -Voltage: 380/660 volts -Shaft: Ø 42 x 110 mm -Protection class: IP44 -Dimensions: 605/315/H400mm -Weight: 121 kg.
pressure: 1645 t stroke: 1000 mm dayligth: 3000 mm Control: down speed: 280 mm/sec return speed: 275/346 mm/sec distance between columns: 2520 mm total power requirement: kW weight of the machine ca.: t the machine is in very good condition optional you can buy a shifting table as well The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1600 mm y-travel: 700 mm z-travel: 850 mm control: Heidenhain TNC 407 taper ISO: 50 Table dimensions: 1950 x 650 mm spindle speeds: 80 - 3000 U7min voltage: 400 V total power requirement: 23 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 160 mm x-travel: 6400 mm y-travel: 3900 mm z-travel: 1450 mm turning speeds: 500 U/min power capacity: 52 kW chip conveyor: digital readout: Plate area: 12000x6000 mm Plate area: 7000x3500 mm Plate area: 93 m² total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m florplates are optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KMER 160 L4 -Power: 15 kW -Speed: 1455 rpm -Voltage: 380/660 volts -Shaft: Ø 42 x 110 mm -Protection rating: IP44 -Design: B3 -Dimensions: 600/320/H395 mm -Weight: 123 kg
Gear motor, electric motor, electric gear motor, worm gear motor -Manufacturer: Eberhard Bauer, gear motor -Type: D 166/1461 -Speed: 28 rpm -Power: 1.5 kW / 935 rpm -Voltage: 380/660 V -Shaft: Ø 50 x 110 mm -Dimensions: 720/320/H315mm -Weight: 88 kg
floor-plate length: 4500 mm floor-plate width: 1600 mm floor-plate height: 380 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 t throat: 360 mm stroke: 500 mm table surface area: 1250x630 mm ram surface: 1000x450 mm table height: 1000 mm dayligth: 800 mm weight of the machine ca.: 8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 t distance between columns: 850 mm stroke: 400 mm ram surface: 800x700 mm : 300 mm pressure of ejector: 20 t table surface area: 800x700 mm total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: 1800x1800x4200 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Electric motor, three-phase motor -Manufacturer: Sintec, electric motor type 160M4 -Power: 11 kW -Speed: 1460 rpm -Shaft: Ø 42 x 110 mm -Design: B3 -Dimensions: 610/320/H415mm -Weight: 115 kg
maximum number of results exceeded
please refine your search
