fp 16 used for sale

Gear motor, electric motor -Speed: 32.5 rpm -Power: 0.37 kW -Brake: 415 V -Construction: B5 angle -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Dimensions: 465/195/H150 mm -Weight: 17.7 kg

Gear motor, electric motor -Speed: 31.5 rpm -Power: 0.25 kW -Construction: B5 angle -Brake: 415 V -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Number: 1x motors available -Price: per piece -Dimensions: 445/190/H140 mm -Weight: 16 kg

LWB Steinl Injection Machine Type VCE -T 500/160 T Clamp power 500 KN Injection volume 160 cm3 Year 2006 6 Bar 400 v 50 hz 26 KW

One used book sewing machine Meccanotecnica Aster 160 Year of man.: 2000 Description: - Digital display - Optical sheet control - 4 4 opening possibilities Technical specifications: max. signature size. 320 x 420 mm min. signature size 75 x 150 mm max.number of stitches: 11 max. mechanical speed: 160 cycles/min

Key data: 18 KW, 13 1/min

Infinitely adjustable variator motor with belt variator

Gear motor, electric motor, three-phase motor -Speed: 45.5 rpm -Power: 0.18 kW -Brake: 24 V -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 65 -Dimensions: 430/200/H140 mm -Weight: 15.1 kg

Gear motor, electric motor -Speed: 1.5 rpm -Power: 0.05 kW -Construction: B3 -Diameter shaft: Ø 16 mm -Protection class: IP 33 -Dimensions: 305/160/H130 mm -Weight: 5.2 kg

Gear motor, electric motor, electric gear motor -Speed: 27 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 65 -Price: per piece -Number: 2x available -Dimensions: 370/180/H200 mm -Weight: 14.2 kg

Gear motor, electric motor -Speed: 89 rpm -Power: 0.3 kW -Construction: B3 angle -Brake: 24 V -Diameter shaft: Ø 20 mm -Protection class: IP 65 -Dimensions: 400/190/H170 mm -Weight: 14.7 kg

Resawing saw ESTERER EWD Type: BNK 160 Built in 1986 3-style variable Harmonic machine Cutting height maximum: 165mm Passage width max: 800mm Drive power 2x 75 kW with S-conveyor with Modlwender with chain retraction with centering device at the front with 2-lamella splinter separator with external task (tilt destacking, cross conveyor) good condition - fully functional Can still be viewed during operation. Has been continuously maintained and overhauled. Location: Austria, near Graz

Gear motor, electric motor, electric gear motor -Speed: 14.5 rpm -Power: 0.075 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Brake: 220 V -Price: per piece -Number: 1x available -Dimensions: 460/180/H190 mm -Weight: 16.8 kg

Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels –  ...

Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels –  ...

Key data: 5000 mm, 1600 mm

Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels –  ...

Key data: 5000 mm, 1600 mm

Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels –  ...

New Part Number: 561 031 04 01 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Dear Ladies and Gentlemen, We constantly have transformer stations for wind turbines in every power and voltage.

Gear motor, electric motor, electric gear motor -Speed: 42 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 370/190/H190 mm -Weight: 13.8 kg

Gear motor, electric motor, electric gear motor -Speed: 27 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 65 -Price: per piece -Number: 3x available -Dimensions: 370/180/H200 mm -Weight: 14.2 kg

Geared motor, electric motor, electric geared motor -Speed: 21.5 rpm -Power: 0.075 kW -Design: B3 -Shaft diameter: 16 mm -Protection class: IP 54 -Price: per piece -Quantity: 3 available -Dimensions: 340/180/H160 mm -Weight: 12 kg

Key data: 1600 KW, 1500 1/min

Dear Ladies and Gentlemen, We have 2 engines MTU 16V4000 Diesel 1600KW 1500 rpm We have another 2x MTU 20V4000 Diesel 2420KW 1500 rpm Operating hours 260 only and have been regularly serviced. If you have any questions or details, please do not hesitate to contact us. Best regards, Schmidt Mobile: 0172 72 653 24

0: 160 mm 0: max./nom.: 1.780/1.447 m³/h 0: v.V./nom.: 3.160/2.450 pa Filter capacity: 12,3 m² weight: 430 kg Dimensions (L/W/H): 1.970 x 910 x 2.070 mm Dust extractor NE 160, J pneum. Filter regeneration ------------------------------------------------ For the extraction and filtering of wood dust and wood chips. GS and H3 testing according to GS-HO-07 (BGHM), vacuum filter with 2 swivel and 2 fixed castors including suction nozzle, with pneumatic Cleaning, 5 m cable with plug and reversing switch, fan included Integrated electric motor IE3 400V / 50Hz, with mobile bin and chip collection bag. Standard is intake manifold on the right / fan on the left. Suitable for standard Sea containers. Technical data / manufacturer description ------------------------------------------------ • Volume flow max./nom.: 1,780 / 1,447 m³/h • Operating volume flow: 2,300 m³/h • Negative pressure ...

geared motor, electric motor -Speed: 128 rpm -Power: 0.18 kW -Design: B5 -Shaft diameter: Ø 17 mm -Protection class: IP 65 -Quantity: 1x geared motor available -Dimensions: 390/130/H210 mm -Weight: 8.9 kg

thickness of jaw: 150 / 160 / 200 mm max. clamping width: 105 / 138 / 275 mm ca. high of jaw: 46 / 63 mm Condition: unused: New machine vices on rotating plate 360 °, provided with 180 ° degree scale from remaining stock at a special price. The body is made of high quality gray cast iron (FC-25), jaws made of rolled steel, hardened, replaceable. Mod.M 150: span: 105 mm, jaw height: 46 mm, dimensions: 600x200x160 mm, Weight: 26 kg, photos 1-3, price 270, - + VAT. Mod. M 160: with covered spindle, three-way adjustable via socket pin, Span: 275 mm, jaw height: 63 mm, dimensions: 800x270x200 mm, weight: 43 kg, photos 4-6, price 700, - + VAT. Mod.M 200: span: 138 mm, jaw height: 63 mm, dimensions: 700x260x200 mm Weight: 54 kg, photos 7-9, price 495, - + VAT. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Edge Grinding Machine Lasm LBK 160 3P two-sided with feed Tiltable table Year of manufacture: 1986 The machine is in good condition, ready for operation. Subject to changes, errors and prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

geared motor, electric motor -Speed: 128 rpm -Power: 0.18 kW -Design: B5 -Shaft diameter: Ø 17 mm -Protection class: IP 65 -Brake: 24 V -Quantity: 15x geared motors available Price: per piece -Dimensions: 390/130/H210 mm -Weight: 12 kg

Schulz roller curve conveyor left with straight section and pusher 90°-450-390 IR795 +1600-450-390 RA1203 Roller curve: Manufacturer: Schulz Angle: 90° left Useful width (NUB): 390 mm Nominal/outside width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 1600 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers, galvanized Pitch: 75 mm including 90° chain pusher, chain spacing 450 mm Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: round belt curve + straight section 2. electric drive for chain scraper Side guide: included on both sides, as illustrated Scope of delivery: without supports (please enquire if 3 supports are required) Optional: Supports Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: after receipt of payment approx. 3 - 5 worki ...

Table dimensions: 2500x 780 mm Motor output: 7,5 kW Spindle diameter: , mm reus: 1.500 - 10.000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lindner Antares 1600 Year of construction: Oct. 2019 Operating hours: 2 h Drive motor : 75 kW ,400 V/50 Hz Control cabinet: complete star/triangle Rotor speed: at 50 Hz approx. 100 rpm. Rotor blades: 40 pcs. Sieves: 30 mm round Rotor blade shape: 65x65 mm Filling opening: LxW 1567x 1355 mm Filling volume: approx. 3.2 cbm Rotor length: approx. 1600 mm Total weight approx. 8500 kg Dimensions LxWxH mm: approx. 3394 x 2330 x 2231 mm Total height with hopper: 2931 mm Hydraulic power unit: 4 kW Viewing and test run possible by appointment. incl. funnel Delivery time: immediately available OPTIONAL: 1x Feed Conveyor Overall length:. 7000 mm, at 25° Belt width with driver: 1800 mm Discharge height: approx. 3000 mm Propulsion : 3 kW NORD Max. load: 100 kg/m2 1x discharge belt with climbing part Overall length:. 8000 mm, at 35° Belt width with driver: 650 mm Wo ...

Gear motor, electric motor -Speed: 22 rpm -Power: 0.25 kW -Construction: B5 angle -Diameter hollow shaft: Ø 30 mm -Protection class: IP 65 -Number: 1x motors available -Price: per piece -Dimensions: 470/200/H190 mm -Weight: 24 kg

Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake -Tool for: Press brake -divided -Tool: 82° -Dimensions: 165 x 47 mm -Total length: 2900 mm -Lengths: 200/300/400/500/500/1000 mm -Weight: 112 kg

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool for: press brake -divided -Tool: 82° -Dimensions: 190 x 45 mm -Total length: 800 mm -Lengths: 45/50/55/60/90/500 mm -Weight: 28 kg

Gear motor, electric motor -Speed: 56 rpm -Power: 0.3 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 65 -Number: 2x motors available -Price: per piece -Dimensions: 400/200/H195 mm -Weight: 15 kg

Height 1400 mm Width 800 mm Length 1850 mm Power supply: 400V 50Hz 3N Total power 17.5 kW Main Material Stainless steel, acid-resistant Loading No loading, it is possible to buy a pillar loading for the machine Throat diameter 160 mm Wolf type: Simple wolf Auger Stuffing Feeding System Hopper Throat Design: Stainless Steel

Pinion Shaft for Poly Clip FCA 160 - NEW Product number 315593 / 193118 Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048/33 812 58 60

Manufacturer : Meissner Model : SR 160/2 Type : Angle Wolf Dimensions : 1950 x 1500 x 1200 ( mm ) Power supply : 400V 50Hz 3N Power : 28 kW Weight : 1500 kg Throat diameter : 160 ( mm ) Stuffing Serving : Hopper Throat Material: Brass Material : Stainless steel, acid-resistant

Long link roller chains, transport chain, roller chain, drive chain -per chain length: m -Pitch: 160 mm -1x chain: 5.1 m available -Weight 60 kg -1x chain: 3.5 m available -Weight 45 kg -2x chain: 9.92 m available -Weight: 81.5 kg/pc. -Price: 55 Eur/m -Weight: 9.5 kg/m

Three-phase motor, electric motor -Motor: is unused -Power: 15 kW -Speed: 2930 rpm -Shaft: Ø 42 mm -Construction: B35 -Protection class: IP 54 -Dimensions: 650/400/H350 mm -Weight: 98 kg

Press force max.:: 1600 kN heating plates:: 400 x 400 mm electrically heated:: -- °C heating power:: 9,92 kW piston stroke:: 400 mm no. of stages:: 1 Condition: Used, Specification: Press 400 x 400 mm, second-hand steel frame construction - Clamping force: 160 tonnes - pressure force: 1600 kN - Operating pressure: 300 bar - Closing: from bottom to top - Heating platens: 2 electric platens - Heating power: 4.96 kW/platen - Heating platen dimensions: 400 x 400 mm - Specific pressing pressure: 1000 N/cm² - Distance between the heating platens: 500 mm - Piston stroke: 400 mm - Piston diameter: 260 mm - AC motor power: 7.5 kW - Pneumatic protective cover in the front area, - lifting device - Sliding table - Approx. dimensions: 1,760 x 1,150 mm - System height approx.: 2,470 mm - Weight approx.: kg The data for this ad was cr ...

Specifications will follow asap

Key data: 60 mm, 1600 mm

virgin Solid design, guide tracks on the boom hardened and ground, Stepless speed control, digital speed display Specifications: Drilling capacity max. 60 mm Threading up to M 46 Projection 350 - 1600 mm Vertical movement of the boom 585 mm Drilling head travel (horizontal) 1250 mm Quill stroke 325 mm Tool holder MK 5 Speed range (2) 38 - 275 / 275 - 2000 rpm Feed range (8) 0.06 - 1.00 mm/rev Distance spindle/cube table 165 - 750 mm Distance spindle/base plate 665 - 1250 mm Clamping surface base plate 1740 x 980 mm Cube table 750 x 500 x 500 mm incl. accessories: - Dice table - Drill chuck mandrel MK5 / B16 - Reducing sleeves MK5/4 MK4/3 MK3/2 - LED machine light - Coolant device - Digital speed display - Height-adjustable protective cover - Operating tool - Operating instructions, CE declaration of conformity

Herbold granulator Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

Three-phase motor, electric motor -Motor: unused -Voltage: 500 volts -Power: 11 kW -Speed: 2920 rpm -Shaft: Ø 38 mm -Construction: B35 -Protection class: IP 55 -Dimensions: 500/345/H300 mm -Weight: 65 kg

Electric motor, three-phase motor -Motor: unused -Power: 18 kW -Speed: 2920 rpm -Shaft: Ø 42 mm -Construction: B35 -Protection class: IP 55 -Dimensions: 640/390/H360 mm -Weight: 110 kg

Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

Description Forklift / LPG forklift Still R70-16t Details Lifting height: 3,000 mm Operating hours: 3,282 h Forks: Hand adjustment technically in order, roadworthy, drive unit overhauled

Three-phase motor, electric motor -Power: 9.2 kW -Speed: 2920 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 560/330/H270 mm -Weight: 80 kg

cutting length: 1060 mm cutting angle: 2 ° no. of strokes: 50 Hub/min engine output: 4,0 kW weight of the machine ca.: 0,67 t Motorized guillotine shears type 165 Technical data: Cutting length: 1060 max. sheet thickness: 2.5 mm Stroke rate/min: 50 Cutting angle: 2° Opening width hold-down device: 5mm Digital display for backgauge Front table support The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.