134,910 used machines on RESALE, but how to find them? Machine Search
weight max. in kg: 1600 kg fork length: 1150 mm stroke height: 5500 mm high: 2385 mm weight of the machine ca.: 1,2 t dimensions: 1,72 x 0,8 x 2,4 m Pallet truck with - Triplex mast - Lithium-ion battery - quick lifting and lowering - low overall height The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manual trolley, trolley, crane trolley, trolley drive, crane trolley, trolley, girder trolley, monorail trolley -Manufacturer: Demag, crane chassis -Beam width: up to 163 mm -Load capacity: 500 kg -Dimensions: see technical drawing in the photos -Dimensions: 250/243/H180 mm -Weight: 15 kg
Manometer, test manometer, pressure gauge with Bourdon tube, pressure and temperature measurement technology -Manufacturer: Wika, pressure gauge -Type: 0 to 160 bar -Screw connection: see photos -Dimension: 105/45/H145 mm -Weight: 0.8 kg
Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor -Temperature sensor: Screw-in temperature sensor -Measuring range: 0 to 160°C -Accuracy class: KL.1 -Measuring probe: Screw-in length 200 mm -Transport dimensions: 330/260/H140 mm -Weight: 1.3 kg
Maximum force: 1600 tons Slider stroke length: 400 mm Unattainable-course: 12 mm Number of courses of a slider per minute: 16 Number of single turn-on: 12 The closed height: 870 mm Adjustment: 220 mm Under-forginig plate: -From left to right: 1600 mm -From front to rear: 1600 mm -Thickness: 650 mm Slider overall dimensions: 1600x1600 mm Aperture in a table: 1000x1000 mm window dimensions in cheeks: 1650x1650 mm Course of a rigid pusher in a slider: 100 mm Force of a rigid pusher in a slider ton-force: 80 Main electric motor power: 110 kW Course of pneumatic pillow: 160 mm Force of pushing out of a pneumatic pillow ton-force: 71 Hydropneumatic pillow: -Working course: 250 mm -Force of pushing out ton-force: 25 -Force of a clip ton-force: 250 Press overall dimensions: 4670x4670x8110 mm Press weight: 147 tons
The scope of delivery includes: 01x Locking bracket, used Material colour: sendzimir galvanized Total length: approx. 1,640 mm Leg "A" approx. 39 mm (flanged) Leg "W" approx. 63 mm Bearing surface: approx. 60 mm Leg "C" approx. 13 mm Material thickness: approx. 1.50 mm Weight / piece: approx. 2,330 kg General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.
Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor, thermometer -Temperature sensor: screw-in temperature sensor -Measuring range: 0 to 160°C -Measurement probe: Screw-in length approx. 200 mm -Transport dimension: Ø100 x 240 mm -Weight: 0.4 kg
Recon Part number: 554 050 03 01 554 051 01 01 Right side Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
roller chain, drive chain -per package: Length: 5 m -Size reinforced: 16B-1 1-way 1 x 17.02 -Quantity: 23 x pieces packages available -Price: per package -Package weight: 14 kg/piece
Proximity switch, proximity sensor, position switch -Manufacturer: Festo, proximity switch orig -Type: 160251 E713 -Dimensions packaging: Ø 150 x 20 mm -Weight: 0.1 Kg
Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Manufacturer: Mann Filter, micro Top Air Filter Type C 17 160 Ovp -Number: 3x air filters included -Price: per piece -Packaging dimensions: 180/180/H230 mm -Weight: 1.1 kg/pc.
Recon Part number: 554 050 02 01 554 050 00 01 Left Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
Tailstock, counter bearing for dividing head, dividing attachment, lathe -Handover: in the current condition as seen -Bracket: cracked, see photos -Tailstock: center height adjustable, 155 to 165 mm -Dimensions: see the drawing in the photos -Dimensions: 430/175/H210 mm -Weight: 21.7 kg
Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, clamping angle with three-jaw chuck, clamping angle with lathe chuck -Rotary table: with three-jaw chuck -Mouth size: Ø 160 mm -Spindle bore: Ø 42 mm -Dimensions: 510/320/H220 mm -Weight: 50.9 kg
Power strip, portable power strip, solid rubber power strip, adapter, construction site power strip -Manufacturer: Gifas, solid rubber distributor adapter 63A / 16A -Transport dimensions: 230/230/H130 mm -Weight: 3 kg
Used fluid bed dryer mady by Bühler model OTWG-160, new 1996. Technical data: - Weight 1050 kg - Content m³: 2.7 - Max. operating vacuum up to 250°C. bar: + 0.1 - Max. operating vacuum up to 150°C. bar: - 0.1 - Max. operating temperature: 250 C°.
Cross-cut saw, optimisation saw Make: Reinhardt Model: Quickstop QS 160 P Year of construction: 1992
Power strip, portable power strip, solid rubber power strip, adapter, construction site power strip -Manufacturer: Gifas, solid rubber distributor adapter 32A / 16A -Type: 2800 Item No.: 282/301657M/303259/6 -Transport dimensions: 230/230/H130 mm -Weight: 3 kg
Welding fume filter, welding fume extraction, flexible extraction arm -Manufacturer: MIG O MAT, welding fume extraction -Extraction fan: Motor Elmot 1.1 kW -Extraction arm: length 5700 mm -Tube: Ø 160 mm / inner Ø 145 mm, see photos -Transport dimension: 2900/100/H470 mm -Weight: 165.5 kg
Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: with T-slots, heavy-duty version -Material: Cast iron -Groove width: 20 mm -Groove spacing 69 mm -Dimensions: 245/165/H130 mm -Weight: 15.1 kg
Chiller ENR160 130KW at 7/12°C, internal P3 pump, internal 390l buffer tank, system is perfectly suited for process applications as it is equipped with a shell-and-tube evaporator and a buffer as well as an internal P3 pump. low GWP refrigerant R454B, winter package, RS485,
used
Complete sawmilling line composed by Hydraulic Carriage, logs turning, cross-cutter and sharpening machine.
Hey Dear Ladies and Gentlemen, Dear Sirs, Thank you for your enquiry. price 2.690.- EURO EXW Finland We can offer you following machine (Subject to being unsold ) Terms of delivery/payment: payable before/ by order . All information and offers are subject to our general terms & conditions If there are further questions, don't hesitate to contact us. Edge sanding machine LASM Volpato LBK 160 SN 349177 year 1989 Manufacturer: LASM Volpato Italy Vertical oscillating sanding machine 3.4 kW motor Swivelling table Mechanical swivelling Additional support and "round" sanding discs Suction device Movable platform with wheels Weight 250 kg Technical specifications subject to change Edge sander LASM Volpato LBK 160 SN 349177 Year 1989 Manufacturer: LASM Volpato Italy Vertical Oscillating Grinding Machine 3.4 kW motor Swivel table Mechanical swivel Addit ...
Control cabinet socket, Schuko socket -Manufacturer: Murr Elektronik, safety socket 16A / 250V -Type: 67950 -Number: 2x safety socket available -Price per piece -Dimension: 80/45/H70 mm -Weight: 0.1 kg/pc.
thermal switch, circuit breaker, electric circuit breaker, thermal switch, temperature switch, thermostat controller -Thermal switch, thermostat regulator, unused orig -Type: 662 029 160 -Number: 6x controller available -Price per piece -Dimensions cardboard: 100/80/H80 mm -Weight: 0.1 kg/pc.
Pre- and post-heating coil, air heating element, DN160, 366260, LHE 160 IS, Dimplex, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Unfortunately the type plate has come off - special price Dimplex - 366260 - LHE 160 IS Air heating element Electric pre- and post-heating. 1.5 kW electric heating coil (power-controlled) for pre-heating the outside air or post-heating the supply air, thermally insulated, with temperature switch adjustable from -30°C to +60°C, air flow monitor for detecting the sma ...
thermal switch, circuit breaker, electric circuit breaker, thermal switch, temperature switch, thermostat controller -Thermal switch, thermostat regulator, unused orig -Type: 662 029 160 -Number: 1x controller available -Price per piece -Dimensions cardboard: 100/80/H80 mm -Weight: 0.1 kg/pc.
Pneumatic cylinder, air cylinder, pneumatic stamp, compact cylinder -Manufacturer: Metal Work, compact cylinder tray sealing machine Inauen VC999/ TS 1200 N -Type: 121AA20160ZP -Stroke: 160mm -Piston: Ø 120 mm -Piston rod: Ø 32 mm / M27 x 2 -Dimensions: 445/135/H135 mm -Weight: 9.6kg
Axes Strokes X = 3706mm Y = 2294mm Z1 = 515mm Z2 = 371mm Max rotation 24000 rpm C axis = 360 deg non-stop rotation B axis = 360 deg non-stop rotation 16 position revolver toolchanger
Oven OMIA SECOMAT V-10 Maxi temperature: 160° Internal dimensions: 1000 x 1000 x 1000 mm Equipped with 1 small trolley Voltage: 380 V Width: 2000 mm Depth: 1500 mm Total height: 2000 mm Weight: approx 1 T MACHINE IN VERY GOOD CONDITION
Workbench, work table, assembly bench -Workbench: with drawers, solid design -Width: 1600mm -Depth: 710mm -Height: 925mm -Drawers/cabinet doors: lockable / without lock/key, see photos -Weight: 115 kg
V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley 4 grooves 160-4 -V-belt width: 13 mm -Receptacle: Ø 55 mm taper bushing 2517-55 (can be changed) -Quantity: 1x V-belt pulley available -Dimensions: Ø 167 x 65 mm -Weight: 5.8kg
Iseki ZM 160 S, intermediate axle mower (belonging to carrier vehicle unknown), built in 2002, incl. accessories shown: discharge plate, lifting shears, lifting cylinder with lifting shaft and lifting arms. More mowers and grass pick-up technology available! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology and winter service, sweeping and waste disposal, environmental maintenance, engines and more...
Nominal pressing force... 160t Table dimensions ... 1000 x 740mm Max. ram stroke... 25-160mm Plunger Dimensions ... 710 x 425mm Plunger adjustment ... 100mm Installation height ... 455mm Main engine power ... 11kW L x W x H ... 1380 x 1950 x 3350mm Machine weight ... 12180kg The machine is in good condition, possible to test under electricity.
V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley 5 grooves type SPA 160x5 2517 -V-belt width: 13 mm -Receptacle: Ø55 x 45 mm taper clamping bushing 2517 (can be changed) -Dimension: Ø165 x 80 mm -Weight: 6.3kg
LWB Steinl Injection Machine Type VCE -T 500/160 T Clamp power 500 KN Injection volume 160 cm3 Year 2006 6 Bar 400 v 50 hz 26 KW
One used book sewing machine Meccanotecnica Aster 160 Year of man.: 2000 Description: - Digital display - Optical sheet control - 4 4 opening possibilities Technical specifications: max. signature size. 320 x 420 mm min. signature size 75 x 150 mm max.number of stitches: 11 max. mechanical speed: 160 cycles/min
Key data: 18 KW, 13 1/min
Infinitely adjustable variator motor with belt variator
Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Clamping surfaces: 300 x 160 x 20 mm / 300 x 200 x 30 mm -Dimensions: 300/160/H200 mm -Weight: 18 kg
Shell end milling cutters, milling cutters, milling cutters, shell milling cutters -Manufacturer: WMW, shell milling cutter, milling cutter type N 9960 -Size: 160x63x50mm -Receptacle: Ø 50 mm -Dimensions of box: 175/175/H100 mm -Weight: 5.9 kg
Printing pad, printing pad for pad printing machine -Manufacturer: Teca-Print, printing pad for pad printing machine -Type: 597 Ø 165 mm -Receptacle: M16 -Quantity: 3x printing pads available -Price per piece -Total dimensions: Ø 165 x 150 mm -Weight: 1.7kg/piece
Resawing saw ESTERER EWD Type: BNK 160 Built in 1986 3-style variable Harmonic machine Cutting height maximum: 165mm Passage width max: 800mm Drive power 2x 75 kW with S-conveyor with Modlwender with chain retraction with centering device at the front with 2-lamella splinter separator with external task (tilt destacking, cross conveyor) good condition - fully functional Can still be viewed during operation. Has been continuously maintained and overhauled. Location: Austria, near Graz
Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels – ...
Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 160 -Throw: 110 mm -Punching capacity: 3mm -Matrix: Ø 43 mm -Dimensions: 225/60/H150 mm -Weight: 6.6 kg
Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels – ...
Key data: 5000 mm, 1600 mm
Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels – ...
Key data: 5000 mm, 1600 mm
Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels – ...
new
New Part Number: 561 031 04 01 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
maximum number of results exceeded
please refine your search
