129,247 used machines on RESALE, but how to find them? Machine Search
Key data: 8 , 600 , 230
High-performance industrial planing machine In good condition, lots of accessories '
Four rollers calander make OMEC Mod. FX4 190 1330 x2.5 / 3.0 Year 2019 NEVER USED - PRACTICALLY NEW Siemens CNC.
Part Number 6338 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 160mm 7 spindles: 1) horizontal bottom 230mm 5,5kW 2) vertical right 160mm 5,5kW 3) vertical left 160mm 5.5kW 4) horizontal top 230mm 7,5kW 5) horizontal upper 230mm 7,5kW 6) horizontal bottom 230mm 7,5kW 7) universal 360° 230mm 7,5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - all spindles equipped with a brake - spindle speed 6000rpm in advance: - 6 pulling, toothed, metal introductory shafts, including 2 double - 4 pulling shafts, rubber including 1 double - 3 clamps on the lead bottom: - pressure from the side on the inlet - introductory shaft, toothed, pulling, swivel in the lower table top - 3 pull rollers, metal, smooth - pneumatically adjustable shafts - length of the introductory table top 1190mm - central lubricati ...
I sell the four-side planer Futura P-MAX 23/5+UNIV, built in 2008. 6 Spindle: bottom - right - left - top - bottom - universal Electronic programming for working width, working height and feed speed. Element max. 230x170mm ! All 6 spindles 6000 rpm. Material prints for short elements. Weight 2500kg. 1-zone pneumatic material pressure system for feed Fully operational. Available the same. Exhibition machine, has worked very little !
four-jaw chuck, 4-jaw chuck -Four-jaw chuck: chuck size Ø 310 mm -Passage: Ø 98 mm -Bolt circle: Ø 290 mm -Jaw width: 26 mm / interchangeable jaws not included -Dimensions: Ø 310 x 90 mm -Weight: 24 kg
four-jaw chuck, 4-jaw chuck -Four-jaw chuck: chuck size Ø 190 mm -Passage: Ø 57 mm -Bolt circle: Ø 170 mm / M10 -Jaw width: 20 mm / interchangeable jaws not included -Dimensions: Ø 190 x 70 mm -Weight: 8.5 kg
Part Number 6368 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 130mm 7 spindles: 1) horizontal bottom 230mm 5,5kW 2) vertical right 130mm 5,5kW 3) vertical left 130mm 5.5kW 4) horizontal top 230mm 7,5kW 5) horizontal upper 230mm 11kW 6) horizontal bottom 230mm 18,5kW 7) universal 230mm adjustable at 360 degrees 5.5kW - all spindles adjustable up/down, right/left - all spindles equipped with an electric brake - spindle diameter 40mm - spindles 4 and 5 electrically adjustable up/down - from above 8 metal pulling introductory shafts, swivel including 2 double - from above 4 pulling rollers, rubber - pressure from above 2pcs - from the bottom of the ratchet - from the bottom from the side 3 clamps - from below 2 metal rollers, smooth, pulling - from the bottom 2 double rollers, pulling, rubber - pneumatically pressed shafts ...
Part Number 6393 TECHNICAL DATA - max width of the workpiece 200mm - max height of the workpiece 150mm - number of spindles 4: 1) horizontal bottom 200mm 5,5kW 2) vertical right 150mm 4kW 3) vertical left 150mm 4kW 4) horizontal upper 200mm 5,5kW - all heads adjustable up/down, right left - spindle diameter 40mm - spindle speed 6000rpm in advance: - pulling introductory shafts, toothed 6 pcs including 2 double - 1 pulling shaft, rubber bottom: - introductory shaft toothed, pulling, torsional in the lower table top - side pressure 3pcs - lead roller, pulling, metal, smooth - all pneumatically pressed rollers - length of the introductory table top 2130mm - table top adjustable up / down - central lubrication - electrical setting of planing thickness - lifting motor 1,1kW - smooth regulation of the feed speed on the inverter - feed motor 3kW - feed ...
Four jaw chuck, four jaw lathe chuck, 4 jaw chuck -Manufacturer: AROWA, four-jaw chuck No. 4 chuck size Ø 138 mm -Passage: Ø 37 mm -Bolt circle: Ø 120 mm -Dimensions: Ø197 x 110 mm -Weight: 11 kg
I sell the moulding heads for the automatic fourside moulder WACO Weinig Gruppe. Inside diameter 50mm Outside diameter (with knives) 170mm Body diameter 155mm 15 pcs. working length 200mm (without knives). 8 pcs. working length150mm (with knives) Each with Hydro holding. Price per pc. 500 euros. Sellable per pc. or totally together. Available immediately.
Precision four-jaw chuck, chuck, faceplate, 4-jaw chuck, four-jaw chuck -Manufacturer: Klopfer, precision four-jaw chuck Ø 165 mm -Passage: Ø 49 mm -Recording: MK4 -Jaws: individually and fully adjustable -Dimensions total: Ø 165 x 230 mm -Weight: 13.6 kg
Four jaw chuck, four jaw lathe chuck, 4 jaw chuck -four-jaw chuck: chuck size Ø 190 mm -Passage: Ø 57 mm -Bolt circle: Ø 170 mm -Interchangeable jaws: Width 20 mm not included, can be supplied at an additional cost -Dimensions: Ø 190 x 65 mm -Weight: 8 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for four-jaw chuck, hard -Jaw width: 34 mm -Dimensions: see photo technical drawing -Dimensions total: 130/136/H80 mm -Total weight: 7.3 kg
Heavy high-performance planer designed for maximum feed performance and productivity. Designed for rough use in planing and sawmills. Suitable for the processing of planed goods and slats. Special features: Left version. for wood widths up to 360 mm. Machine we sell as used. But the machine never ran. Electrical part still has to be built by Ledinek - here adjustments are possible (axe positioning, FU-s, 400V or 480V etc.). Price is for the variant in the PDF description. Adjustments on request. Drive motors available.
ORDER NO. 6575 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 170mm - 7 spindles: 1) horizontal bottom 230mm, 11kW 2) vertical right 170mm 3) vertical left 170mm (2 and 3 spindle), 11kW 4) horizontal right 170mm, 5.5kW 5) horizontal upper 230mm, 11kW 6) horizontal bottom 230mm, 7.5kW 7) universal 230mm, adjustable at 360°, 7.5kW - all spindles adjustable up/down, right/left - spindle 3 and 5 electrically adjustable - ATS - spindle diameter 40mm - electric brakes - from above 4 pulling introductory shafts, toothed including 1 double - from above the introductory roller pulling rubber double - from above the shaft leading out, pulling, rubber, double - from below 2 metal rollers, pulling, smooth - pulling roller, rubber, double - feed on cardan rollers - pneumatically pressed shafts - smooth adjustment of the feed spe ...
Four jaw chuck, four jaw lathe chuck, 4 jaw chuck -Four-jaw chuck: chuck size Ø 125 mm -Passage: Ø 32 mm -Mount: cone 55 - 58 mm -Accessories: incl. 3 sets of interchangeable jaws -Dimensions: Ø125 x 125 mm -Weight: 8.9 kg
CATALOG NUMBER 6679 TECHNICAL DATA - max width of the workpiece 250mm - max height of the workpiece 170mm 6 spindles: 1) horizontal lower 250mm 5.5kW 2) vertical right 170mm 5.5kW 3) vertical left 170mm 5.5kW 4) horizontal, upper 250mm 7.5kW 5) horizontal lower 250mm 7.5kW 6) universal 250mm, adjustable at an angle of 360 ° 5.5kW - 6 electrically adjustable spindle up / down - all adjustable spindles up / down, right / left - diameter of the spindles 40mm - 6 introductory pulling rollers, toothed, including 2 double ones - 6 rollers leading out, pulling, rubber, smooth, including 2 double - 2 clamps from above - from the bottom, a roller introducing toothed, pulling, torsion in the table before the first spindle - at the bottom, 2 pulling rollers, metal, smooth - 4 side clamps at the bottom - feed on cardan shafts - pneumatically pressed rollers - smooth regulati ...
CATALOG NUMBER 6674 TECHNICAL DATA - max planing width 150mm - max planing height 130mm 7 spindles: 1) horizontal lower 150mm 3kW 2) vertical right 130mm 3kW 3) vertical left 130mm 4kW 4) horizontal upper 150mm 4kW 5) horizontal lower 150mm 3kW 6) vertical right 130mm 4kW - diameter of all spindles 35mm - all adjustable spindles up / down and right / left - from above, 4 pulling rollers, toothed - 4 rubber, pulling rollers from above - 2 clamps from above - electric adjustment of the planing thickness of 0.25kW - length of the introductory top 1970mm - central lubrication of the table top - smooth regulation of the feed speed - 1.5kW feed motor - diameters of the extraction ports 6x120mm - dimensions length / width / height 4000x1300x1600mm - weight about 3000 kg - German production - for 6 heads - used planer, very good condition Net price: PLN 36900 ...
CATALOG NUMBER 6651 TECHNICAL DATA - max width of the workpiece 220mm - max height of the workpiece 120mm - 4 spindles: 1) horizontal bottom 220mm 4kW 2) vertical right 120mm 4kW 3) vertical left 120mm 4kW 4) horizontal upper 220mm 5.5kW - all adjustable spindles up / down, right / left - diameter of the spindles 40mm - from above, 4 introducing rollers, toothed, including 2 double ones - from above, 1 pulling roller, smooth, rubber - rubber, pulling roller at the bottom - pneumatically pressed rollers - feed on cardan shafts - 1.1kW feed motor - 0.37kW lifting motor - electric adjustment of the planing thickness - length of the introductory top 1980mm - side pressure - smooth adjustment of the feed speed 8-16m / min - central lubrication - diameter of the extraction port 5x140mm - locked in the cabin - dimensions length / width / height 3400x1500x1700mm - wei ...
Catalog No. 6765 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 160mm number of spindles 4: 1) horizontal bottom 230mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm - electrically adjustable right/left from the control panel 5.5kW 4) horizontal top 230mm - electrically adjustable up/down from the control panel 7.5kW - all spindles adjustable up / down, right left - spindle diameter 40mm in advance: - introductory pulling rollers, toothed 6 pcs, including 2 double - pulling out rollers, rubber 2 pcs from down: - introductory toothed, metal, torsion roller in the bottom plate + - smooth metal pulling roller - pneumatically adjustable rollers - length of the introductory tabletop (with pneumatic feeder) 3390mm - the ability to work without switching on the pneumatic feeder, - adjustable top / bottom - central lubrication - ...
Key data: 4 , 220 , 120
Guiliet Profilier and Hobelautmat with Wepla heads Model: 220 KXR 220 Year built:1990 Condition: very good (used) MAX CROSS-SECTION 220 X 120 MM MIN CROSS-SECTION 30 X 6 MM ENTRANCE TABLE 2000 MM long. PLANING SHAFTS 40 MM Dressing shaft 5.5 kW right and left planing shaft combined 5,5kW Thickness planer shaft 5.5 kW WEIGHT APPROX. 1600 KG Cleaned, maintained and functionally tested. If necessary, we can gladly offer planing heads with continuous cutting edges.
WEINIG moulder model UNIMAT 17A with 8 shafts: -useful working measures 170x120mm -gimbal towing and pneumatic pressure -variable feed speed from 6.3 to 36.5 mt/min -Double wheel of upper feed before the 1st shaft -tandem feed groups in front of the 2nd and 4th shaft -fluted plane from 1st to 6th shaft -2000mm long entrance plane -manual lubrication pump of the table Tree layout: 1-under 2-right 3-left 4-right 5-above 6-under 7-above (free space below) 8-Universal
Four-way planer Weinig Unimat U 23 (Ref. No. 231-2615) with 7 waves Planer width 130 mm Planing height 140 mm Masch. Item no. 023-161 Year of construction 1991 The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 fax 0041 62 966 21 12
press capacity:950 kN control:Siemens S7 Required air-pressure:6 bar loading area:1200 x 600 mm Pressure power:1000 kN total power requirement:18 kW weight of the machine ca.:6200 kg dimensions of the machine ca.:2600 x 1300 x 3100 mm
Four-side planer with 4 planing heads •Powerful with 4 motors Hsvwvkytm Voltage 400 V / 3 / 50 Hz Motor power 17,1 kW finished workpiece width 180 mm min. finished workpiece width 25 mm finished workpiece thickness 105 mm min. finished workpiece thickness 10 mm min. length of the workpiece - for single feed 350 mm - at group feed 250 mm Number of working spindles 4 Spindle speed 6000 min-1 Spindle diameter 40 mm Cutterhead diameter 120 mm Length of horizontal spindles 190 mm Length of vertical spindles 120 mm Feed speed 6; 12 m/min Diameter of feed rollers 120 mm Length of feed table 1700 mm Distance of the feed table from the floor 920 mm Quick adjustment of the feed table and ruler 10 mm Weight 1000 kg
CATALOG NO. 6904 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 130mm 6 spindles: 1) horizontal bottom 230mm 5.5kW 2) vertical right 130mm 3) vertical left 130mm (2nd and 3rd spindle) 7.5kW 4) horizontal top 230mm 5.5kW 5) horizontal bottom 230mm 5.5kW 6) universal 230mm, 360° adjustable 5.5kW - all spindles adjustable up / down, right / left - spindle 1,2,3,4,5 equipped with an electric brake - spindle diameter 40mm - 5 introductory, toothed, pulling rollers from above - from above, 4 rollers, pulling, rubber, smooth, including 2 double - from the bottom, a rubber roller, pulling - feed on cardan shafts - rollers pressed pneumatically - smooth adjustment of the feed speed - feed motor 4kW - working pressure 6-10 bar - electric setting of planing thickness - motor lifting the body of about 0.55 kW - central lubrication of the co ...
MARTIN T90 Year of construction 1996 Nominal current: 64 A max. planing width: 260 mm max. planing height: 160 mm 5 spindles: 4x Tersa planer head + 1x universal spindle Spindle arrangement: Bottom – Right – Left – Top – Universal Spindle 1 – 4: 4 knife shaft – Tersa Use of profile knives for chamfers and radii possible (spindle R + L + O) Spindle 5: Universal 40 mm spindle (max. tool diameter: 220 mm) swivel (- 45° / + 90°) Bottom: 5.5 kW Left+Right: 5.5 kW Top: 5.5 kW Universal: 7.5 kW Feed speed: 4 – 25 m/min. (infinitely variable) electronic positioning control (storage of up to 100 pairs of dimensions possible) Engine brake Central lubrication Extras: Universal spindle Table extension at the spout Hold-down device for joining shaft right incl. 8 new rubber pull-out rollers Suction connection: 250 + 160 mm Dimensions: L: 524.5 cm W: ...
used
Four-sided planer Leadermac 823 Working width 230mm Working height 160mm Head system Bottom 11kw Right 7.5kw Left 7.5kw Top 11kw Top 11kw Bottom 11kw Rights 15kw Left 15kw Upper heads with supports Feed regulated on the wave Feed motor 7.5kw Rollers pulling in the table material Pneumatic upper pulling rollers Adjustment of heads by controller
Catalogue number: 6824 TECHNICAL SPECIFICATIONS - max width of the workpiece 220mm - max height of the workpiece 125mm 4 spindles: 1) horizontal bottom 220mm 7,5kW 2) vertical right 125mm 3) vertical left 125mm; (2 and 3 spindles) 11kW 4) horizontal top 220mm 11kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - 4 pulling, toothed and metal insertion rollers from above - from above 1 double shaft pulling, rubber - from the bottom of the pulling shaft, rubber - feed on cardan shafts - smooth regulation of feed speed 6-22m / min - feed motor 3kW - lifting motor 0,55kW - electrical setting of planing thickness - length of the introductory table top 2470mm - central lubrication - diameter of extraction connection 3x120mm, 140mm - locked in the cabin - dimensions length / width / height 3940x1450x1470mm - weight 1666kg – unpainte ...
Key data: 5 , 300 mm, 200 mm
Spindle arrangement: scoring saw at the bottom - planing shaft at the bottom - top - right - left Diameter of spindles: 40-X-X-50-50 Spindle Speed: 5400 Counter bearings: 2-3 Jointer: 2-3 Engine powers: 15-45-55-22-18,5 Adjustment of the working width: digital Adjustment of the working height: digital Feed speed : 50 - 200 Feed motor: 45 KW Feed: Cardan Horizontal tool head D205 Vertical tool head D160xH100 Z12 Table height constant approx. 1000mm Diameter of suction nozzles 200-250-160-160-120 Weight 13000 kg
Leadermac 823 Hypermac four-sided planer Working width 230mm Working height 160mm Number of spindles: 8 Spindle system: 1.Bottom 7.5kw 2.Right 7.5kw 3.Left7.5kw 4.Top7.5kw 5.Right 7.5kw 6.Left7.5kw 7.Top11kw 8.Bottom 11kw Feed speed 50m/min Pulling rollers in the table Upper and lower spindles with supports Pneumatic clamps
Specifications: -working width 230 mm -feeding speed 5-25 m/min. -working height 130 mm -number of spindles 9 -configuration down-right-left-right-up-down-left-up-down -total power about 45 kW -
Four-sided planer Weinig Unimat 23 EL Working width 230mm Working height 160mm Head Arrangement: Bottom 5.5kw 4kw rights Left 5.5kw 4kw rights Mountain 11kw Bottom 5.5kw Mount 7.5kw Bottom 7.5kw Feed speed adjustable on variator 6-36m/min Feed driven by cardan shaft Driven rollers in the table Pneumatic clamps CE Certified Year of Build 2003 Net price
CATALOG NO. 7221 TECHNICAL DATA - min / max width of the workpiece 45 / 150mm - min / max height of the workpiece 15 / 50mm 3 spindles: 1) horizontal lower 11kW 2) horizontal upper 22kW (7000 rpm) 3) horizontal lower 5.5kW spindle diameter 40mm - spindle 1 and 3 manually adjustable up/down, right/left - 2 spindle, manually adjustable right/left - 2 spindle, electrically adjustable up/down - spindle 2 and 3 are equipped with brakes in advance: - 3 introducing, pulling, metal toothed rollers - 1 double output, pulling, rubber roller from down: - pressure on insertion - grooved top - pulling roller, metal, smooth - electric setting of planing thickness - smooth adjustment of feed speed 6-24m/min - 3kW feed motor - feed on cardan shafts - length of the introductory tabletop 1970mm - automatic tabletop lubrication system - diameter of the exhaust port 1x150mm, 2x ...
CATALOG NO. 7219 TECHNICAL DATA - max width of the processed element 200mm - max height of the processed element 150mm number of spindles 4: 1) horizontal bottom 200mm 5.5kW 2) vertical right 150mm 4kW 3) vertical left 150mm 4kW 4) horizontal top 200mm 5.5kW - all heads adjustable up/down, right left - spindle diameter 40mm - spindle speed 6000 rpm in advance: - 6 pulling, toothed input rollers, including 2 double ones - 1 pulling, rubber, double output roller from down: - toothed, pulling and turning roller in the lower tabletop - side pressure 3 pcs - discharging, pulling roller, metal, smooth - all rollers pressed pneumatically - length of the introductory tabletop 2130mm - top/bottom adjustable top - central lubrication - electric setting of planing thickness - 1.1kW lifting motor - smooth regulation of feed speed - 3kW feed motor - feed on cardan shafts ...
CATALOG NO. 7220 TECHNICAL DATA - min – max width of the processed element 20 – 230mm - min – max height of the processed element 8 – 160mm 7 spindles: 1) horizontal bottom 230mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm 5.5kW 4) vertical right 160mm 5.5kW 5) vertical left 160mm 5.5kW 6) horizontal top 230mm 7.5kW 7) horizontal bottom 230mm 7.5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - spindle speed 6000 rpm in advance: - 10 pulling, toothed and metal input rollers, including 2 double rollers - 3 side pressures from down: - pressure from the side at the insertion - input shaft, toothed, pulling, turning in the lower tabletop - 2 pressure points from the side - grooved top - drawing roller, metal, grooved - drawing roller, metal, smooth - pneumatically adjustable rollers - length of the introductory tab ...
CATALOG NO. 7134 TECHNICAL DATA - max planing width 500mm - max planing height 190mm in advance: - pawls - sequential pulling shaft - 2 rows of clamps - pulling, sequential input shaft - 500mm planing shaft, 4-knife, 7.5kW engine - clamps - pulling, smooth, output shaft - pressure on the lead from down: - adjustable insertion table + pressure - slip shaft, smooth - 500mm planing shaft, 4-knife, 5.5kW engine - 2 slip shafts, smooth - side pressure in the back: - side spindles 1) vertical right 140mm 4kW 2) vertical left 140mm 4kW - spindle diameter 40mm - spindles adjustable up/down, right/left - smooth adjustment of feed speed 8-30m/min - electric tabletop lifting - diameters of the exhaust pipe: 2x145mm, 2x160mm - dimensions length/width/height 2050x1700x1700mm - weight 2100 kg ADVANTAGES – ideal for flooring processing – electric tabletop lifting ...
CATALOG NO. 7186 TECHNICAL DATA - max planing width 510mm - max planing height on both sides 170mm - maximum planing height on four sides 100mm in advance: - pulling, toothed input shaft - pawls - pulling shaft, toothed - pressure - planing shaft 510mm, 4-knife (2 knives installed) 4kW - pulling, smooth, output shaft from down: - guide strip - sliding roller – adjustable top with an up/down roller - planing shaft 510mm, 2-knife 4kW - 2 smooth, sliding, adjustable shafts in the back: - 2 side spindles + pressure - 1) vertical right 100mm 2.35kW - 2) vertical left 100mm 2.35kW - spindle diameter 35mm - spindles adjustable up/down, right/left - manual setting of planing thickness - 4 types of feed speeds - feed motor 1.5kW - dimensions length/width/height 1940x1320x1140mm - weight 1330kg ADVANTAGES – ideal for processing logs, floor tiles, etc. – pro ...
Key data: 6 , 230 mm, 150 mm
I am selling the new four-way planer LEADERMAC COMPACT 623C (2M), New machine built in 2024. Exhibition machine ! Configuration 6 Spindle: Bottom 5.5 kW / 7.5 HP Right 5.5 kW / 7.5 HP Left 5.5 kW / 7.5 HP Top 7.5 kW / 10.0 HP Right milling machine 11 kW / 15.0 HP / adjustable speed Left tiller 11 kW / 15.0 HP / adjustable speed Feed speed adjustable 6-36 m/min. Feed motor 3.0 kW / 5.5 HP + inverter Element max. width 25-230mm Element max. height 10-150mm All 6 spindles 6000 rpm. / the right and left milling machine with adjustable speed Electronic programming for working height Material proofs for short elements. 3-zone pneumatic material pressure system for feed Total weight 4500kg. Combined power 51.18 kW / 68.25 HP Fully operational. Available soon. Exhibition machine, completely NEW ! Tools, planer heads, milling heads and all accessories included.
Key data: 4 , 300 mm, 200 mm
I am selling the new four-way planer LEADERMAC COMPACT 430, New machine built in 2024. Exhibition machine ! Konfigurazion 4 Spindle: Bottom 7.5 kW / 10.0 HP Right 7.5 kW / 10.0 HP Left 7.5 kW / 10.0 HP Top 7.5 kW / 10.0 HP Feed rate adjustable 6-24 m/min. Feed motor 7.5 kW / 10.0 HP + inverter Element max. width 15-300mm Element max. height 10-200mm All 6 spindles 6000 rpm. Schneider Touch-Screen EASYSET Electronic programming for working width, working height and contact height Material proofs for short elements. 3-zone pneumatic material pressure system for feed Total weight 4000kg. Combined power 39 kW / 52 HP Fully operational. Available soon. Exhibition machine, completely NEW ! Incl. CE and complete documentation !
maximum number of results exceeded
please refine your search
10 € 
