form used for sale

Sheet metal profiling line was built in 2017. Equipment: – profiling machine – guillotine – control system – hydraulic press with an aggregate

Sind Hamburger forming machine

Line for forming cevapcici and cevapi (grinder with mixer, portioning device and belt transporter)

We offer a position new formwork supports galvanized, with external thread 1,95-3,50m according to DIN Euro standard 1065 manufactured with flat head Class B/D tested 144 pieces a 47,90EUR + 3 x stack pallets 1.43 x 0.87 x 0.69m new a 150.00EUR total 7347,60EUR net Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Office/ warehouse address: Birkenstrasse 15 89185 Humlangen- Hüttisheim, Germany Register court Ulm: HRA722943 VAT-ID-NR: DE279047055

2 Thermal VLF Systems: 1 x AGFA Avalon VLF A xxt year : 2006 5000 paltes with new Laserhead AGFA VLF Platemanager with AGFA Elantrix 150 Onlineprocessorwit transit table to the oven. with Haase oven OG15FU with transit table to gum unit withGum unit RSH with explanation table Price: on request 1x AGFA Avalon VLF A xxt year : 2006 Price: on request

ILLIG STAL80 Trim Press, age 1988:- Technical data ILLIG STAL 80 :  Punching table area max. 1000 x 510 mm  Material width max. 800 mm  Infeed length 20 - 400 mm  Stroke height 200 mm  Mold height 272 mm Part height (positive and negative) max. 100 mm  Number of strokes (infinitely variable) 25 - 130 /min Trimmed Parts are stacked through the Punch Tool The Skeletal Waste is fed directly into the Grinder ILLIG RS75 Under the Trim Press Grinder, Motor 8.3 kW, age 1995

workpiece diameter: 110 mm grinding length: 410 mm clamping length: 20 mm total power requirement: 0,25 kW weight of the machine ca.: 500 kg dimensions of the machine ca.: m Profile Tool Grinder for Chamfer Angles, accessories The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 480 mm plate thickness: 3 mm stations: 13 total power requirement: kW weight of the machine ca.: 11 t dimensions of the machine ca.: 15,x2 m Number of stations 13 Number of straightening stations 1 Waves 60 mm Center distance, horizontal 310 mm Center distance, vertical 110 - 250 mm Speed approx. 11 m / min. Connected load approx. 20 kW Uncoiler (without drive) - Coil- , inside 508/610 mm - Coil weight 3 t Flying hydraulic scissors Roller set for hat profile The techn. Data is manufacturer or operator information and therefore for us not binding. We reserve the right to make an interim sale, it applies exclusively our business and conditions of sale. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Combination machine Manufacturer Mubea Type KBL100 5-fold combined Flat steel shears 150x19mm Profile steel shears e.B angle iron 160x7mm or 100x12mm Bar steel shear 70mm round Hole punching Jack 16mm All information to the best of our knowledge, but without guarantee!

Capacity: 0 t Stroke: 0 mm Length of sleeve maximum: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 5 to Execution supports Table length: 150 mm Table width: 120 mm Fixed stroke: 30 mm Distance from table to slide: min.: 25 mm max: 145 mm Machine´s weight about: 51 kg Overall dimensions machine: Length: 350 mm Width: 250 mm Height: 550 mm

Janssen Moulding Roller for K12 K600 pastry forming machines Diameter: 58.5 cm

Janssen Moulding Roller for K12 K600 pastry forming machines Diameter: 58.5 cm

Janssen Moulding Roller for FM128 K4 pastry forming machines Diameter: 23,9cm

Kalmeijer Forming Roller for Kalmeijer KGM machines Overall Length: 47cm Roller: 25cm

Kalmeijer Forming Roller for Kalmeijer KGM machines Overall Length: 47cm Roller: 25cm

Kalmeijer Forming Roller for Kalmeijer KGM machines Overall Length: 47cm Roller: 25cm

Moulding roller pastry roller Nicholas Overall Length: 23.9cm for pastry moulding machine Kalmeijer

all stainless steel hopper capacity 270L die width 400 mm usable die surface 370 x 130 mm maximum volume per stroke ± 1,47 kg maximum 50 strokes / minute total power 8 kW air consumption ± 300 L / min. mobile with mould trolley variable speed 3x400v 50hz with bridge breaker dimensions (l x w x h) : ± 3.140 x 1.900 x 2.570 mm weight 1200 kg PLC control

We offer high quality 3S formwork panels with melamine resin coating. Only while stocks last! SFS plus 3-layer panels 200cm/50cm 21mm and 250cm/50cm 21mmnew a 18,50€ / m² from 100m² European origin product Top quality, numerous inserts per page possible. Excl. VAT + Transport Subject to sale They offer on 1 m² Stock on request For questions 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Office/ warehouse address: Birkenstrasse 15 89185 Humlangen- Hüttisheim Register court Ulm: HRA722943 VAT ID NO.: DE279047055

Pastry moulding machine Kalmeijer KGM biscuit moulding machine Pastry moulding machine Type: Kalmeijer KGM with 2 forming rollers 10 baking trays thickness of the dough figures is adjustable Dough hopper, forming roller, dough feed roller is easily removable for cleaning Easy to use The trasnport belts for the sheets can be folded in and out Machine requires little space Machines can be driven on rollers Dimensions: Height: 122cm Width: 170cm Depth: 52cm

1250 x 2500mm TLF 2000w Laser STOPA Sheet storage, SheetMaster, ToolMaster, SortMaster Year: 2005

Hamburger forming machine, Sind, NEW Capacity: 2100 pieces / hour Hamburger forming diameter: 90 mm to 120 mm

Hamburger forming machine, Sind, NEW Capacity: 1000 pieces / hour Hamburger forming diameter: 90 mm to 120 mm

Hamburger forming machine, Sind, NEW Capacity: 1000 pieces / hour Hamburger forming diameter: 90 mm to 120 mm

We offer a new, universal element slab formwork system EVODECK 205m², directly from the factory at great conditions, special net price 60.312,00€ Covered with polypropylene plastic plate! The system can be operated completely from below. Drop heads allow for early stripping, emergency support is retained and the elements can be used for the next construction section. 100 Element EVODECK 150x120 cm with PP formwork plate 8 Element EVODECK 150x75 cm with PP formwork board 8 Element EVODECK 120x75 cm with PP formwork board 60 Drop head EVODECK 90 Fixed column head EVODECK 50 Cover profile ALU EVODECK 150 cm 7 Cover profile ALU EVODECK 75 cm 3 mounting rod height adjustable 210 - 350 cm 10 UNI 150 beams for levelling/beam 10 UNI 120 beams for UNI 120 levelling/beam 6 transport set elements 150x120 cm for 18 elements Technical details, assembly instructions and discou ...

Dokadek formwork The beamless hand formwork in lightweight steel construction. Quick assembly and dismantling High shuttering speed due to 3 m² elements Fast shuttering of larger ceiling heights without climbing aid due to element length 2.44 m Fast stripping due to simple and safe swivelling of the elements Quick and safe handling thanks to ergonomic grip holes in the edge profile of the large, rectangular elements Long service life due to galvanized frame Dokadek formwork The beamless hand-set formwork system as a lightweight steel construction. Fast assembly and disassembly High-speed forming with large panels measuring 3 m² Fast forming of greater room heights without ladder or platform systems thanks to 2.44 m long panels Fast stripping made possible by panels that are easily and safely tilte Long working life due to galvanized frame

Universal - folder former make RAS type 22.15Built in 1970Profile height max.:20 mmMaximum bandwidth: 60 mmNumber of reel stations: 7Sheet thickness at 400 N / mm2 max .: 1.5 mmProfiling speed approx. 14 m / minPower requirement: 3 kWOperating voltage: 400 V, 50 Hz, 3 Ph.Dimensions approx: 1670 x 480 x 1005 mmWeight approx. 300 kgWith- Profile rolls for Pittsburg fold and standing seamused, from an operating resolution, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Universal folder former make RAS type 22.10Masch. -No: 353/4 built in 1982for sheet thickness up to: 1.5 mmProfiling speed: 6.0 and 12 m / min.Number of reel stations: 7Drive power: 2.2 / 3.4 kWWeight approx: 490 kgOutside dimensions approx : 2160 x 710 x 1010 mmWith- 2 set of profiling rolls- Footswitch- larger table with stopsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Universal folder former make RAS type 22.15Mash. -No: 163/2Profile height max.:20 mmSheet thickness max .: 1.5 mmDrive power: 2.2 kWExternal dimensions: 1140 x 790 x 1210 mmWeight approx. 300 kgWith- Set of rollers for Eckfalz with Falzöffnerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Used Marel Stork THV 630 former is used for shaping and forming various meat products, such as burgers, meatballs, nuggets, sausages, and patties. It helps create uniform shapes and sizes for consistent portioning and presentation. THV 630 former has a belt width of 630mm. This width allows for efficient processing of meat products within that range. Marel is known for prioritizing hygiene and food safety in their equipment designs. The THV 630 former is designed with features that facilitate easy cleaning and sanitization. It typically has removable parts, smooth surfaces, and meets the necessary food-grade standards. The THV 630 former is equipped with advanced automation and control systems. These systems offer precise control over shaping parameters, production speed, and product consistency. The automation features help improve efficiency, reduce labor requirements, and ens ...

Used Marel Townsend THV 400-E65 former is designed to streamline the process of shaping and producing burgers with a different size or quantity and various shapes. Townsend former employ advanced technology and automation to mold the ground meat or plant-based mixture into consistent and uniform shapes. It feature adjustable mould variations, allowing for customization of diameter, and weight according to specific requirements. In set with loading for 200l meat bins and lots of new original spare parts. Whole construction is made of stainless steel and food approved plastic which guarantees the ease of maintenance and the highest hygiene at work. Square moulds dimensions: 90 x 115mm, 77 x 110mm, 80 x 110, 90mm x 115mm Oval moulds diameter: 40mm, 50mm, 115mm Dimensions: 2400 x 1000 x H2200mm Max height with loading: 3300mm

Automatic rotative machine for the moulding of car filters, air-oil, panel or circular, with polyurethane seal Manufacturer: GUSBI S.P.A. Model: 24 stations Country of manufacture: Italy The machine is in very good technical condition. You can see it at work. If you are interested, I will send you the price, additional technical data and photos. Specyfications: Available at 24 stations Turntable complete with 24 mould-holders Casting trolley with 2-axes Feeding machine for Polyurethane material Electronic control board to manage the functions of the machine Hourly output: from 200 to 350 pieces, according to the model of the machine, the utilized P.U. material and the mould -- Automatic rotary machine for forming car filters, air-oil filters, plate or round filters, with polyurethane seal Manufacturer: GUSBI S.P.A. Model: 24 stations Country of origin: Italy  ...

Janssen Pastry Moulding Machine Type: FM128 K4 with 1x speculoos roller Extra rollers available at extra cost Band width: 23.5cm with heating Height: 145cm Width: 80cm Depth: 50cm

LIQUIDATION of complete line of chapata forming with the option of 2 sizes. Our "Multipurpose Line" allows us to continuously and automatically produce a wide range of products such as chapata. Manufacturer: CANOL. The line includes the following models of CANOL machines: MCI 690, PRE 700 C/O, MUL 700, TR/D, GH/MR/65. Thanks to the 'Zero Stress' technology applied to our pasta extruder, it is possible to treat all types of sourdoughs with a high moisture content gently and without stress, safeguarding the gluten structure, keeping the structure of the dough stable and avoiding the loss of yeast gas from it. Thanks to the use of this methodology, the final quality of the products obtained, both frozen and cooked, is considerably superior to traditional systems and lines. Our line "Multipurpose Line" is characterized by the ease and speed in the passage of production from one product to ...

Pastry moulding machine Type: Kalmeijer KGM with 2 forming rollers (speculoos + . ) thickness of the dough figures is adjustable Dough hopper, forming roller, dough feed roller is easily removable for cleaning Easy to use The trasnport belts for the sheets can be folded in and out Machine requires little space The machine is in need of overhaul Dimensions:  Height: 122cm Width: 170cm Depth: 52cm

Balkenzwinge 20 – galvanized Used - ready for immediate use! Galvanized beam clamps for support in beams and edge and ceiling formwork Length: 30 cm Height: 35 cm 6.9 kg Price: € 32,00 356 pieces in stock forming support 20 – galvanized Used - ready for immediate use! Galvanized beam clamps for supporting beams and edge and slab stop ends Length: 30cm Heigth: 35cm 6.9 kg Price € 32,00 356 pieces on stock

New Generation Polymer Formwork Panels, 18mm New generation formwork panels for maximum efficiency. The polymer panels can be nailed or cut like conventional formwork panels. No deformation, rot or rust possible. The panels are more durable than any other wooden formwork panel, even under the toughest working conditions. - Formwork plate made of polymer plastic - Weight of the plate 32kg - Dimensions 1.25 x 2.50m - Recyclable - € 20,55 per m2 New Generation Polymer Plywood, 18mm New generation formwork panels for maximum efficiency. The polymer panels can be nailed or cut like traditional formwork panels. No deformation, rot or rust possible. The panels are more durable than any other wooden formwork panel, even under the toughest working conditions. - Polymer Plywood - Sheet weight 32kg - Dimension 1,25 x 2,50m - Recyclable - € 20,55 per sqm

Automatic punching machine double stand Pressure 125 ton Stroke 10 - 80 mm Stroke rate 50-300 1/min Stand width 1180 mm Table area 1150 x 850 mm Continuous opening in the table 1000 x 220 mm Plunger area 1210 x 550 mm Plunger adjustment 100 mm Material width feed 350 mm Material thickness - 6 mm Punching system incl. Feed Model RS 350 SL Levelers Kohler Reel

Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K Year of construction 1994 Operating hours 42,.650 hours, stand September 2022 Press power main press 100 tons Press power of pre-press 50 tons Feed channel 1,600 x 1,100 mm Filling volume 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm, lenght variable Drive power 2 x 30 kW Tying system 5-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 16 tons/hour bulk weight of 50 kg/cbm approx. 25 tons/hour bulk weight of 100 kg/cbm approx. 47 tons/hour Bale weight with a bale length of approx. 1.2 m approx. up to 1400 kg, depends on material Filling volume hydraulic oil tank 1,200 l SPS controller (manuf., type) Telemecanique TSX 47 Effektive transport dimensions only baler 11,850 x 2,600 x 3,470 mm (l x w x h) Transport weight baler 38.5 tons Condition of the baler: The machine was  ...

Square or rectangular skewer former, semi-automatic. • Manufactured by EMSENS model ESA (France) • Different foods such as meat, fish, vegetables, fruits and other processed products can be used. • Previously prepared ingredients to then place them manually in the molds. • We can make skewers and Moorish skewers in it. • Ergonomic that optimizes the operator's gestures and movements. • Ease of cleaning linked to a design that takes into account agri-food constraints. • Maximum productivity. Condition of the machine, in good condition, checked, guaranteed, reconditioned and tested. • Complies with the following directives and standards: - For contact with food: EC 1935/2004 - Good Manufacturing Practices: EC2023/2006 - Machine with: EC2006/42 - EMC: EC 2004/108

Square or rectangular skewer former, semi-automatic. • Manufactured by EMSENS model ESA (France) • Different foods such as meat, fish, vegetables, fruits and other processed products can be used. • Previously prepared ingredients to then place them manually in the molds. • We can make skewers and Moorish skewers in it. • Ergonomic that optimizes the operator's gestures and movements. • Ease of cleaning linked to a design that takes into account agri-food constraints. • Maximum productivity. Condition of the machine, in good condition, checked, guaranteed, reconditioned and tested. • Complies with the following directives and standards: - For contact with food: EC 1935/2004 - Good Manufacturing Practices: EC2023/2006 - Machine with: EC2006/42 - EMC: EC 2004/108

Muhr & Bender KBL 65-30 Optima B profile punching machine Type KBL 65-30 Year of construction 1975 Central lubrication Electrical triggering of the movement via foot pedal 5 tool stations Stop for long material Punch Punch 30mm in 17mm 24mm in 21mm Quick-change device for stamps Profile scissors 1. Z-profile 90° 140mm 2. Angle iron 90° 130x12mm 3. Square aisles 50mm 4. Round iron 55mm 6. T-iron 180mm 7. U-iron 90° 180mm 8. T-iron 90° 100mm Bar steel shears for material 45kp mm² strength 1. Flat iron up to max 60x28mm or 120x18mm 2. Angle iron 80x10mm 3. Square aisles 40mm 4. Round iron 45mm 6. T-iron 80x10mm 7. U-iron 100mm 8. T-iron 100mm Plate shears 1. with knife 13° = 13mm 2. with knife 2.5°= 140x9mm / 220x8mm 3. with knife 5° = 140x13mm / 220x12mm 3 phase current.- Frequency 50 Hz / 4 ...

- Installed 03-2008 - RIP program Trueflow 3 with 1 bit tif - Exposure hours from the laser 3.052 ( Total 51285 plates ) - Semi-automatic plate feed with the help of the plate loading table - Large and multi-format output – from 4 pages to 32 pages - 2 x inline Punch Bacher 2000 ( double exposure two Plates simultaneous and punching ) - 14 plates/hour 2,032 x 1,270 mm - 17 plates/hour 1,524 x 1,143 mm - 30 plates/hour: 1,030 x 800 mm (exposure of two Plates simultaneous ) - Innovative 512-channel GLV exposure head enables high-speed exposure of large-format plates or two side-by-side mounted panels Plates up to the size of 1,160 x1,270 mm. - Resolution: 1200 / 2400 / 2438 / 2540 dpi - - with GLUNZ & JENSEN Quartz III 150 plate developer - with forklift

Product number: 2498 Type: MLF600 Serial number: 723 Year of construction: 2000 Belt width: 600 mm Capacity: max 75 strokes/min. Hopper: 380 litres Compressed air: 6-8 Bar, 300 nl/min. Power: 3 x 400V, 50Hz, 23kW Dimensions: 2600 x 1200 x 2100 mm Weight: 1782 kg

We offer a Noe Top 2000 wall formwork in ready-to-use condition. Most of the elements are galvanized and covered with plastic formwork. Price without accessories 99,00€/m² 28 pieces 3.31m x 2.65m 8 pieces 2.65m x 1.32m The formwork is compatible with the Doka Framax and so are the accessories. Doka accessories available on request. If you have any questions, please contact Mr. Becker on 0049 176 70044689 Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Master Craftsman Company Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ Warehouse Address: Birkenstraße 15 89185 Humlangen- Hüttisheim Ulm Registry Court: HRA722943 VAT NUMBER: DE279047055

Press mould Box 600400200 (vegetable), wear 70%, part of the perforation and the closure line is filled with material.

Handtmann Sausage linking machine (2007) Good condition

Thermal VLF CTP Avalon N16-50 XT 510,000 plates produced Year : 2013 with MAL 16000, year 2009 with Processor Quartz III 125 with Stacker NO RIP

We offer a Doka Framax Xlife 3.30m with 75% discount - 423.55m² New value: 297.446,00€ - Special net price 74.500€ + VAT Complete with accessories on request. Formwork completely cleaned, inspected and sorted. Formlining fair-faced concrete class 2/3 possible without any problems. Out-of-the-box, suitable for higher-value use. Pcs. Description 32 Framax Xlife element 2.70x3.30m 2 Framax Xlife element 1.35x3.30m 4 Framax Xlife element 0.90x3.30m 3 Framax Xlife-Uni-Element 0.90x3.30m 5 Framax Xlife element 0.60x3.30m 4 Framax Xlife element 0.55x3.30m 5 Framax Xlife element 0.45x3.30m 3 Framax Xlife element 0.30x3.30m 22 Framax Xlife inner corner 3.30m - new Finply formlining 14 Framax Xlife inner corner 3.30m 2 Framax Xlife outer corner 3.30m 3 Framax hinge corner I galvanized 3.30m 3 Framax stripping corner I 3.30m If you have any questions, pleas ...