forging presses used for sale

Here are the technical data of the offered machine: Technical data + information: • No-load speed up to 40 mm/sec • Opening speed up to 40 mm/sec • Starting press speed 5–15 mm/sec • Table size/heating plate size 600 × 600 mm • Plunger size/heating plate size 600 × 600 mm • 2 heating plates, electrically heated, up to 250 degrees – as OPTION • Total size approx. 2000 × 1000 × 2800 mm height • OIL temperature monitoring • Automatic lubrication • Free positioning of the plunger • SICK/LEUTZE light barriers 14.1 mm on the front • Circulating oil cooling • Pressure holding valve 0 to 1800 sec. • Rear monitored door • Pressure adjustment from 30 T to 120 T • Travel limitation either by pressure or position • Programming set-up mode, single stroke (adjustable via rotary switch) • Control panel permanently installed in the wall  ...

automatic baler Manufacturer: HSM Type: VK 42/800 Year of construction: 2002 specifications: Pressing force: 42 t Channel format: 700 x 800 mm (W x H) Binding: 4-fold horizontal Filling opening: 800 x 650 mm Drive power: 30 kW Optionally with conveyor belts

FEINTOOL GKP F 160 hydraulic press was built in Switzerland. The automatic fine blanking press combines several workpiece machining stages into one precise process and significantly saves time and effort. As a result of fine blanking, parts with a maximum thickness of 6 mm obtain a characteristic even surface and accurately defined edges that cannot be achieved with other machines. The FEINTOOL GKP-F hydraulic punching press features a robust, stable construction and a total force of 160 tonnes. Offered with the machine a sheet metal feeder with a maximum thickness of 6 mm and a width of 210 mm allows for completely automatic machining. The automatic punching press underwent extensive modernisation in 1999. The total weight of the GKP-F 160 press is 9000 kg. Technical data of the FEINTOOL GKP F 160 fine blanking press - maximum sheet metal thickness: 6 mm - maximum sheet metal wi ...

Type / type: N 25 Year of make: 1977 Manufacturer / make: Weingarten Rated pressure: 25 t Number of strokes: 140 / min Radius slide center to frame: 200 mm Window in frame: 240 mm distance table slide: 250 mm Stroke adjustment / adjustment of stroke: 8 ... 80 mm Ram adjustability/adjustment of ram: 50 mm Ram size / surface of ram: 355 x 220 mm Table size / surface of bed: 560x 400 mm Hole in table: 160 mm Power of main motor:3 kW Weight / weight: 2,23 t

Specifications: Capacity: 60 t Passage between stand: 820 mm Working area, max.: 820 x 300 mm Piston stroke: 400 mm Flow speed: 6.1 mm/s Return speed: 10 mm/s Motor power: 3 kW Width: 1460 mm Depth: 850 mm Height: 2400 mm Weight, approx.: 700 kg Equipment: - Laterally movable cylinder - Spacious work area - Height-adjustable table - Torsion-resistant design made of welded steel -Manometer - Fine adjustment of pressure - Additional hand pump

MODEL ST-150 Power t 150 Motor power kw 4 Working speed mm/s 2.3 Approach speed mm/s 7.4 Return speed mm/s 10 Maximum pressure bar 305 Piston stroke – J mm 450 Lower table mm 1,500 x 3,000 Head Displacement – C mm 1,000 Bridge Displacement – D mm 2,500 Front light – A mm 1,550 Vertical light – B mm 700 Working height – E mm 750 Total front – G mm 3,000 Total side – H mm 3,000 Overall height – I mm 2,750 Weight kg 5,000 STANDARD DESCRIPTION: We have designed ST series motorized hydraulic presses, with movable gantry and adjustable head, available in three powers from 80 to 150 tons. They are specifically designed for the straightening of welded structures and plates cut by oxy-fuel or laser. Its design facilitates the loading and unloading of large parts, plates or structures, optimising working times. Thanks to the lateral displac ...

TECHNICAL CHARACTERISTICS: MODEL CF-100/VR Power t 100 Engine power kw 9 Neckline mm 375 Working speed mm/s 5 - 9 Approach speed mm/s 162 Return speed mm/s 230 Maximum pressure bar 290 Piston stroke mm 450 4 Lower table mm 850 × 600 Top table mm 700 × 450 Maximum vertical span mm 650 Working height mm 900 Total front mm 1,240 Total side mm 1,950 Total height mm 2,790 Weight kg 3.820 STANDARD DESCRIPTION: The CF/VR series motorized gooseneck hydraulic press models are available in three different power outputs, from 80 to 150 tons. Specially designed to carry out medium and high production work in stamping, die-cutting and drawing. These state-of-the-art presses stand out for their high versatility, allowing them to be integrated into automatic production lines. They work with a hydraulic pressure of less than 320 bar, which guarantees gr ...

Specifications: Capacity: 100 t Passage between stand: 1010 mm Working area, max.: 1010 x 300 mm Piston stroke: 400 mm Flow speed: 7.12 mm/s Return speed: 13.42 mm/s Motor power: 4 kW Width: 1600 mm Depth: 850 mm Height: 2450 mm Weight, approx.: 1000 kg Equipment: - Laterally movable cylinder - Spacious work area - Height-adjustable table - Torsion-resistant design with welded steel -Manometer - Fine adjustment of pressure - Additional hand pump

TECHNICAL CHARACTERISTICS: MODEL SH-250 Power tn 250 Motor power kw 5.5 Piston stroke mm 450 Maximum pressure bar 350 Neckline mm 375 Working speed mm/s 2.2 Approach speed mm/s 9.8 Return speed mm/s 17.5 Guide diameter mm 40 Support table mm 2.200 x 600 Table spacing mm 900 Support blocks mm 120 x 120 x 600 Working height mm 850 Total length mm 2.820 Total width mm 2,000 Total height mm 1.615 Weight kg 8,500 STANDARD DESCRIPTION: Our SH Series Horizontal Ram Hydraulic Press is designed with a range of three different powers ranging from 100 to 250 tons. Horizontal hydraulic presses are specially designed for straightening and bending profiles, bars and beams. The horizontal design of the machine allows us to easily handle large beams and profiles. The horizontal hydraulic press of the latest generation HS series has evolved into a versatility of use ...

TECHNICAL CHARACTERISTICS: Model 60 NC 100 NC 150 NC Power TN 6 10 15 Motor power kw 3 3 4 Adjustable stroke mm 0 – 80 0 – 80 0 – 80 Neckline mm 550 650 450 Working Height mm 1,090 1,180 1,033 Front total mm 610 610 540 Total side mm 780 780 960 Total height mm 1,800 1,900 1,700 Weight kg 550 700 825 STANDARD DESCRIPTION: HIDROGARNE hydraulic inserters are designed for insertion and clinching work, offering robustness, precision and reliability. They are compact and low-occupy, fully hydraulic equipment that guarantees precise insertion at any point of the punch stroke. They allow clinching work to be carried out in thicknesses from 1 to 6 mm and the insertion of any type of insert in materials such as copper, aluminium, carbon steel and stainless steel. They are available in insertion powers of 6, 10 and 15 tonnes. Digital hydraulic inserters are aimed  ...

Specifications: Capacity: 160 t Passage between stand: 1100 mm Working area, max.: 1100 x 350 mm Piston stroke: 400 mm Flow speed: 6.2 mm/s Return speed: 6.8 mm/s Motor power: 5.5 kW Width: 1640 mm Depth: 1000 mm Height: 2550 mm Weight, approx.: 1300 kg Equipment: - Laterally movable cylinder via rack, pinion and handwheel - Spacious work area - Height-adjustable table - Torsion-resistant design with welded steel -Manometer - Fine adjustment of pressure - Additional hand pump

Key data: 80 , 1050 , 450

MODEL ST-80 Power t 80 Motor power kw 3 Working speed mm/s 3.8 Approach speed mm/s -- Return speed mm/s 4.7 Maximum pressure bar 315 Piston stroke – J mm 450 Lower table mm 1,000 x 1,750 Head Displacement – C mm 730 Bridge Displacement – D mm 1,100 Front light – A mm 1.050 Vertical light – B mm 500 Working height – E mm 800 Total front – G mm 2,000 Total side – H mm 1,750 Overall height – I mm 2,250 Weight kg 1,700 STANDARD DESCRIPTION: We have designed ST series motorized hydraulic presses, with movable gantry and adjustable head, available in three powers from 80 to 150 tons. They are specifically designed for the straightening of welded structures and plates cut by oxy-fuel or laser. Its design facilitates the loading and unloading of large parts, plates or structures, optimising working times. Thanks to the lateral displace ...

pressure: 160 t distance between columns: 850 mm stroke: 150 mm table surface area: 850x650 mm total power requirement: kW weight of the machine ca.: 7 t dimensions of the machine ca.: 2,5 x 2,5 x 3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press Schüco Model 290124 Type 2 Specifications: •pneumatic • Operating pressure max. (bar): 8 • Weight max. (kg): 80 • Enclosed tool: included (see photos)

USED OBEDINENT ECCENTRIC PRESS DESCRIPTION: The frame and slide are constructed of cast steel, with dovetail guides, with a base intended for oil recovery and equipped with mechanical extractor. For the protection of the press and dies. It has two compensating cylinders, pneumatically driven, for balancing the slide and dies. The connecting rod is built in alloy steel and long dimensioned. The clutch-brake is electro-pneumatic actuated, equipped with a double-body safety solenoid valve with cross-flows. Lubrication is carried out by means of a centralised manual pump and the pneumatic installation is equipped with a compensation tank, filter-regulator-lubricator unit with a control pressure switch and safety valve. On the front of the press is the two-handed shot, with an emergency stop button and a stop button in upper neutral. OB-100 TECHNICAL SPECIFICATIO ...

Pos. 5 – 1 1000 MT Press Mfc.: Yejing Force: 1000 T Type: LH Press Built: 2016 Billet: dia. 127 x 580 mm Auxiliary Built: 2020 Mfc.: Jiangshun Water Tank + Air Cooling Cooling bed: 38 m x 7.5 m Pos. 5 – 2 1000 MT Press Mfc.: Yejing Force: 1000 T Type: RH Press Built: 2016 Billet: dia. 127 x 580 mm Auxiliary Built: 2020 Mfc.: Jiangshun Water Tank + Air Cooling Cooling bed: 38 m x 7.5 m Pos. 5 – 3 1000 MT Press Mfc.: Yejing Force: 1000 T Type: LH Press Built: 2016 Billet: dia. 127 x 580 mm Auxiliary Built: 2020 Mfc.: Jiangshun Water Tank + Air Cooling Cooling bed: 38 m x 7.5 m Pos. 5 – 4 1000 MT Press Mfc.: Yejing Force: 1000 T Type: RH Press Built: 2016 Billet: dia. 127 x 580 mm Auxiliary Built: 2020 Mfc.: Jiangshun Water Tank + Air Cooling Cooling bed: 38 m x 7.5 m Pos. 1 – 4 1000 MT Press Mfc.: Yejing Force: 1000 T Type: RH Press Built: ...

Specifications Maximum pressure: 9 tons Pressing force: 2.76 kg/cm² Bale size: 650x500x580 mm Power supply: 400V/4kW Year of construction: 1996 Productivity: approx. 3 bales/hr Machine is fully functional, after technical supervision.

Rotary indexing table with 12 stations Automatic ejector three pressing stages Pressure capacity 1,000 KN Stroke 12-120 mm Stroke rate 30-60 1/min Plunger adjustment 80 mm Total weight 9,500 kg

Qty. 1 Second-hand Aluminium Extrusion Press Lines (Pos. 2-1, 8-2, 12-1, 12-2, 12-3 & 12-4) Pos. 2-1 - 1450 MT Press Mfc.: Yejing Force: 1450 T Type: LH Press Built: 2017 Billet: dia. 152 x 6000 mm Auxiliary Built: 2019 Mfc.: Jiangshun Water Tank + Air Cooling Cooling bed: 38 m x 9.0 m Pos. 8-2 - 1450 MT Press Mfc.: Yejing Force: 1450 T Type: RH Press Built: 2015 Billet: dia. 152 x 6000 mm Auxiliary Built: 2020 Mfc.: Jiangshun Water Tank + Air Cooling Cooling bed: 38 m x 9.0 m Pos. 12 -1 – 1450 MT Press Mfc.: Yejing Force: 1450 T Type: LH Press Built: 2020 Billet: dia. 152 x 800 mm Dim.: 14 x 7.1 x 4.7 m Weight: 124 T Log length: 6.0 m Auxiliary Built: 2020 Mfc.: Jiamgsun Water Quench + Air Cooling Cooling bed: 38 m x 9.0 m Pos. 12 -2 – 1450 MT Press Mfc.: Yejing Force: 1450 T Type: RH Press Built: 2019 Billet: dia. 152 x 800 mm Auxiliary Built: ...

used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 18 S Year of construction: 2013 Serial No.: 116398 Specifications: Pressing force: 18t Engine: 4 kW Connection voltage: 400/50 V/Hz Cycle time: 22 s Pressing time: 12 s Insertion opening: W x H 107 x 62 cm Height from floor: 98 cm Bale ejected: W x H x D approx. 110 x 70 x 70-80 cm Bale height adjustable Bale weight: 120 – 180 kg depending on the material to be pressed Machine width: 152 cm Machine depth: 95 cm Machine height: 197 cm Weight: 850 kg (Subject to errors in the technical data)

used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 25 S Year of construction: 2012 Serial No.: 1113653 specifications: Pressing force: 25 t Filling opening: 1,200 x 670 mm (W x H) Height from the ground: approx. 940 mm Split egg filling opening: 1,070 x 260 mm Bale size: 1,200 x 800 x max. 800 mm Bale weight: up to 250 - 320 kg Drive power: 5.5 kW Cycle time: approx. 24 sec. Pressing time: approx. 13 sec. Binding: 4-fold - vertical with poly strap Machine dimensions: 1,600 x 1,300 x 3,170 mm (W x D x H) Machine weight: 2,180 kg Transport height: 2,240 mm (Subject to errors in the technical data)

used cabinet press Manafacture: HSM Type: 155.1 VL Year of construction: 1998 Machine no.: 6118.114. 01217M Serial no.: 6118.01217 specifications: Pressing force: 18 t Filling opening: 1,100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1,100 x 700 x 950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Output: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)

The Dorst TPA 50 is a used mechanical powder compacting press, designed for precision and efficiency, making it well-suited for demanding industrial applications. With a maximum pressing force of 500 kN and a maximum withdrawal force of 400 kN, this machine is both robust and reliable. It allows for a maximum filling height of 180 mm and a pressing stroke of up to 90 mm. Engineered for versatility, it features an upper punch stroke of 120 mm and an adjustable stroke of 220 mm, operating at speeds ranging from 7 to 32 strokes per minute. The machine requires a compressed air supply of approximately 200 liters per minute and has a total connected load of about 18 kW. Its solid construction occupies a footprint of approximately 2000 mm in width and 1700 mm in depth, with a height of 3250 mm and a total weight of approximately 5,500 kg.

used cabinet press Manafacture: HSM Type: VL 155.2 Year of construction: 08 / 2003 Machine No.: 6114.734. R Serial No.: 240141893 specifications: Pressing force: 16 t Filling opening: 1,100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1,100 x 700 x 950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Output: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)

The Dorst TPA 15 is one of the most robust mechanical powder compacting presses in its class. It provides a maximum pressing force of 150 kN and an ejection force of 80 kN, making it suitable for a variety of industrial applications. The machine features a filling height of up to 110 mm and a pressing stroke of 55 mm. Operational flexibility is enhanced by a 150 mm upper ejection stroke and an 80 mm adjustable stroke. It operates efficiently at speeds ranging from 6 to 32 strokes per minute, maximizing production throughput. The press requires a compressed air supply of approximately 80 liters per minute and has a total connected load of about 15 kW. The sturdy Dorst TPA 15 unit measures approximately 2200 mm in width, 1400 mm in depth, and 3250 mm in height, with a weight of approximately 3200 kg.

Specifications Maximum pressure: 36 tons Pressing force: 46.75 tons/m² Duct cross-section: 700x1100 x reg mm Bale weight: 380 kg Power supply: 400 V/ 15 kW Year of construction: 2009-2010 Number of ties: 4 vertical Dimensions of the tailgate: 1030x1100 mm Weight: approx. 3.9 tonnes Bale tying: manual

Press for paper or plastic Pressing pressure 5 tons 400 V 16 A Length 80 cm Width 80 cm Height 2 m

The Dorst TPA 12 is a used mechanical powder compaction press, ideal for a variety of industrial applications. It offers a maximum pressing force of 120 kN and a withdrawal force of 80 kN, making it well-suited for demanding operational conditions. With a filling height of up to 70 mm and a pressing stroke of 35 mm, this machine provides both flexibility and efficiency. It features an upper punch stroke of 100 mm—adjustable to meet various pressing requirements—and is capable of performing between 6 and 32 strokes per minute. The press is designed for efficient operation, requiring approximately 60 liters of compressed air per minute and having a connected load of about 6 kW. Its compact yet robust design measures approximately 2200 mm in width, 1400 mm in depth, and 2550 mm in height, with a total weight of 2200 kg.

automatic baler Manafacture: PAAL Type: PACOMAT IS Year of construction: 1993 specifications: Pressing force: 35 t Specific pressing force: 5.51 kg/cm² Duct format: 700 x 700 mm Filling opening: 800 x 650 mm Drive power: 18.5 kW Throughput: 80 m³/h with additional manual feed hopper Wire passage seen in the direction of pressing on the left side

Technical data Maximum pressure: 80 tons Year of Make: 2002 Press force: 90.9 t/m² Number of bindings: 4 - horizontal Channel cross-section: 1100 x 800 mm Dimensions of the tailgate: 160 x 102 cm Bale weight: approx. 500 kg Weight: approx. 16,5Tonen Power connection: 400 V/75kW Bale tying: automatic Press capacity under operating conditions: max 285 m³ / hour Theoretical throughput to density 35 kg/m3: approx. 9.9 tons/hour Theoretical throughput to density 65 kg/m3: approx. 18.5 tons/hour Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the channel Automatic rod for cleaning the blades from stuck material Choice of the length of the finished bale Press plate stably guided on the large rollers Large flaps  ...

Code: 0454 Brand: CASOLIN - ITALY Model: EASY - CE Standard Hydraulic automatic single-bar clamp press for window and door frames – CE Standard Technical data: Min/max working length mm 250/3000 Min/max working height mm 340/1900 Min/max nominal vertical thrust pressure 880/8800 kg Min/max nominal horizontal thrust pressure for cylinder 280/2800 kg Horizontal pistons stroke 200 mm Pump power 3 Kw Width of the bars 120 mm The upper mobile bar is guided through its its movement by a unit composed by 2 gears and 2 racks positioned on the rear of the machine The regulations of the oil pressure of the vertical and horizontal cylinders are separate and adjustable by through the use of two handwheels The lower press bar can work in 2 positions Control button panel in ergonomic position with pensile arm Overall dimensions mm 3870 x 1040 x 2900 h Overall dimensions for tr ...

Hand screw press, used Balancier, used Typ/ type: PSHZ 25/I Presskraft / rated pressure: 25 t Hub/ stroke: 250 mm Tischgrösse/ table size: 400x 500 mm Ram: 200 x 500 mm Tischöffnung / hole in table: 140 mm Weight/ weight: 0,9t

Universal stamping machine Max impact power 50 KN Total stroke 80 mm Stroke sequence per hour 1500 Pneumatic Data

A 2007 Anis Trend baler, model ATS 110-75S-9CT-150T. Balers like this compress loose cardboard, paper, plastic film and other dry recyclables into dense, stackable bales, cutting the number of collections a site needs and turning a bulky waste stream into a saleable material. Before buying a second-hand baler it is worth checking the bale size and weight against what your outlet accepts, the condition of the hydraulics and rams, the power supply you have available and how the machine will be fed. Well-made bales of cardboard, paper or film are cheaper to move and can often earn a rebate rather than a disposal charge. We run balers, granulators and shredders on our own site at Wymeswold, near Loughborough, so we can talk you through how a machine like this would suit your material and throughput. Price on request.

Inv. Num. : 6700 Type: 3000 kN Producer: Loire Created: 1992 GO 2008 Parameters: Control system: SIEMENS SIMATIC OP17 Compressive force: 3000 kN Table length: 2495 mm Table width: 1505 mm Maximum distance between the table and the ram (when the ram is low): 1200 mm Stroke: 800 mm Working speed: 64 mm/s

Inv. Num. : 6701 Type: 4000 kN Producer: Hydraulico Created: 1977 Parameters: Control system: SIEMENS SIMATIC OP Compressive force: 4000 kN Stroke: 800 mm Table height: 680 mm

A 2010 IPS baler, model AT-754-HS-30. Balers like this compress cardboard, paper, plastic film and other dry recyclables into dense bales, reducing collections and storage space and making the material easier to sell. Before buying a second-hand baler it is worth checking the bale size and weight against what your outlet accepts, the condition of the hydraulics and rams, the power supply you have available and how the machine will be fed. Well-made bales of cardboard, paper or film are cheaper to move and can often earn a rebate rather than a disposal charge. We run balers, granulators and shredders on our own site at Wymeswold, near Loughborough, so we can talk you through how a machine like this would suit your material and throughput. Price on request.

pressure: 20 t throat: 185 mm stroke: 100 mm table surface area: 380 x 350 mm dayligth: 250 mm table height over floor: 840 mm total power requirement: 4 kW weight of the machine ca.: 1,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hot press Adkins OM 1000 Government machine Baujar 2015

A 2008 Garbage Gorger MSK baler. Balers like this compact cardboard, paper, film and other dry recyclables at the point they are produced, which frees up floor space, reduces collections and makes the material easier to sell. Before buying a second-hand baler it is worth checking the bale size and weight against what your outlet accepts, the condition of the hydraulics and rams, the power supply you have available and how the machine will be fed. Well-made bales of cardboard, paper or film are cheaper to move and can often earn a rebate rather than a disposal charge. We run balers, granulators and shredders on our own site at Wymeswold, near Loughborough, so we can talk you through how a machine like this would suit your material and throughput. Price on request.

Stock Number: 3785 ECCENTRIC PRESS Manufacturer: PMB, Type: EPFT 100 Machine NO.: 004301, Year of manufacture: 2002 Specifications: Table size 780 x 590 mm Stroke length 8-120 mm Number of strokes per minute 55 Projection 300 mm Operating height 395 mm Total power 7.5 kW Pneumatic clutch. Gear ratio. Hydr. Overuse protection. Weight: 5500 kg

• Available with conveyors (£18 for the pair) An AUSONIA vertical baler. Vertical balers have a small footprint and are loaded from the front, which makes them a good fit for shops, warehouses and factories producing steady volumes of cardboard, paper or film that do not justify a horizontal baler. Before buying a second-hand baler it is worth checking the bale size and weight against what your outlet accepts, the condition of the hydraulics and rams, the power supply you have available and how the machine will be fed. Well-made bales of cardboard, paper or film are cheaper to move and can often earn a rebate rather than a disposal charge. We run balers, granulators and shredders on our own site at Wymeswold, near Loughborough, so we can talk you through how a machine like this would suit your material and throughput. Price on request.

SPECIFICATIONS: 01 Hydraulic press ORMA LS/R-45/13 Dimensions: 4500 x 1300 mm 08 Piston Ø 70 mm 02 Piston with rack-and-pinion plunger Stroke: 200 mm 01 Loading roller conveyor 4500 x 2200 mm 01 Unloading roller conveyor 4500 x 1300 mm (with stop) ACCESSORIES: 01 Generator HF with 40 Kw 01 Double roll gluer 01 Manipulator ELEPHANT 200 kg Length: 4000 mm

Qty. 1 Second-hand extrusion press line Mfc.: UBE, Guangdong Kikan, Comatco, Omafu Built: 2014 Stopped: 2025 Extruder force: 6600 MT, 7300 UST Billet dia.: 356 & 457 mm, 14” & 18” Billet length: 610 – 1346 mm Control system by Siemens PLC Scope of supply: Single aluminum rod heating furnace + hot sawing machine Extrusion press Cold bed production line Straightening machine Fully automatic servo traction machine Finished product sawing machine + Aluminum shavings recycling system Mold heating furnace Mold-specific lifting machine 8 individual box molds 2 box-type cover molds heating furnace Aluminum rod stripping machine Pneumatic oil purifier unit for extruder Distribution cabinets of the production line

SPECIFICATIONS: Suitable for processing backrests Number of spindles: 06 Speed: 10,000 rpm variable Max. machining depth: 50 mm Bending radius of the working table min - max: 300 - 900 Pneumatic workpiece clamping

• 120 tons total pressing force • Pressing area 3,000 x 1,350 mm • With patented, thermostable electric heating plates with automatic temperature control system • Connected load of the heating plates with economy circuit 10.6 kW • Connected load of the hydraulics 2.2 kW • in 6-cylinder version Ø 85 mm • Lockable main switch • Push-button control • Stop button • Safety ripcord, safety edge • Timer with automatic opening and acoustic signal • Stroke = opening 400 mm • Infinitely adjustable stroke limitation • 2-stage hydraulics with automatic pressure follow-up • Compact hydraulic power unit mounted maintenance-free in the oil tank • Teflon bronze guides in the cylinders • Hard chrome-plated steel pistons • Heavy rack and pinion compensation for synchronous table movement • fully open on four sides • Economy circuit installed as s ...

Hello, Today we can offer you a high-performance crank press ERFURT Type.PDOH 630 from 2011 Offer for sale. The machine can still be viewed under power and will be sold from the site. Hello, Today we can offer you a high-performance crank press ERFURT Type. PDOH 630 from 2011 for sale. The machine can still be viewed under power and is sold from the site. ERFURT PRESS 630 TO Type. PDOH 630 Year of construction. 2011 Presskraft / Pressing power 6300 kN Table: Table Length x Width Length x Width 2900 x 1400 mm Tool installation height Tool installation height (mm). 800 mm / 926.94 mm Plunger stroke plunger stroke 350 mm/ 96.13 mm Slide stroke at the bottom, 150 mm adjustment at the top. Slide stroke bottom, 150 mm adjustment top. Stößel / Pestle Length x Width Length x Width 2900 x 1400 mm Stroke rate / 20-80 min1

I sell a heavy briquetting press RUF RB400. Year of construction 11/2012 Engine power 22kW Productivity Number 400 pcs. Wood briquettes / hour Wood briquette RUF 150 x 60 x 40-110mm (Depends on material) Material moisture up to 15% Nominal pressure 14200 N/cm2 Oil cooler included. Dimensions: 3000 x 1800 x 2000 mm Combined weight 3000kg Equipment on the right - right entrance box. Condition after full remont/500Mtstd warranty as new. Available right away. With full documentation and CE.

- Only 1X used - 1.25 kW - 50 Hz - 3.6A Auction-ID: A3-46118-15080