force control used for sale

CNC NUM 760 full cnc visible in our warehouse in Gussago BS Italy

Control screening machine Tripette & Renaud model 21 M2 Conical strainer basket 300-360/ 800 Power 3 kw V-belt drive Wire covering MW 1.2 Outlet funnel is included Good condition

Key data: 140 °C, 6 kW, 45 W

Special items Various temperature control units pressure-overlaid up to 140 C°

An unused Technotrans temperature control unit is available. Connected load range: 8kW-9.5kW, heating capacity range: 7.5kW-9kW, cooling capacity: 23kW, circulating medium: water, max. operating temperature: 95°C, max. operating overpressure: 0bar, filling volume: 10l. Documentation available. On-site inspection is possible.

The machine is in good technical condition, testing possible after prior agreement. Haidenhain 530 system.

CNC Machining Center Hedelius C 80-2300 Control: Heidenhain iTNC 530 Year of Make: 2012 Travels: X-axis 2,340 mm Y-axis 800 mm Z-axis 600 mm Clamping area: 2,900 x 750 mm Pendulum machining 2 x 945 x 800 mm Table load: approx. 2,800 kg Mount: SK 40 Tool magazine: 30 – compartment Spindle speed 30 - 8,000 rpm Accessories - Chip conveyors - Paper tape filter system - Handwheel HR410 - Machine hood - 2x LTA suction - Partition wall - Pickup magazine for angle heads

General Manufacturer: Chiron Type: DZ 12 W Magnum high speed plus Control: Siemens 840D Year of Make: 2016 Travels: X 550 mm Y 400 mm Z 400 mm Rapid traverse X/Y/Z: 75 m/min Operating hours: 14,709 h Working spindle Speed: 20,000 rpm Torque: 29 Nm Power: 24 – 36 kW Tool holder: HSK 63A Double spindle spindle spacing: 250 mm Tool changing table Dimensions L/W: 660 x 950 mm Tool/movement Tool changer: 32-fold Dimensions and weight Weight: approx. 9,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Spindle coolers IKZ high-pressure system with belt filter Knoll KF150/500 Chip conveyor Probes Renishaw Oil mist extraction Blum Laser Measurement

Manufacturer: Mori Seiki Model NLX 2500 Y/700 Top condition Year of construction 2012 only approx. 6000 operating hours incl. 12 antr. WZ Holders + 17 Static WZ Holders Quick-change system from EWS Hollow clamping device KITAGAWA BB210A821 + KITAGAWA SS1881K21 for the main spindle Coolant system with increased pressure 5 bar Hinged belt conveyor, right ejection Integrated part catcher for main spindle I/F for bar replenishment, LNS Double foot switch with protective cover Signal light (red, yellow, green) Total Counter Workpiece counters EU Tool Holder Package SAUTER BMT60 (T32259, T32260, T32261, T32262) SKM253 MSQP Transformer 45.0 kVA 15 bar Grundfos pump incl. Hydac Filter Cantilever length for driven tools 100 mm (limited Y-axis travel) (Y, SY, SMC)

Manufacturer: WEBEN / CEEVER Application: Automated part handling after upstream press (press not component), washing, drying and quality control Description: The system is an automated system for removing and transporting parts from an upstream press. Robots take over the parts, guide them through an industrial washing tunnel (wet cleaning) via a conveyor and transport system and then through a control/measurement system for quality inspection. The entire process chain is designed for a continuous process and combines robot handling, washing process, conveyor technology and automatic quality decision (OK/NOK). Technical Data – Washing Tunnel Year of Make: 2021 Cleaning process: spray-spray (water-based), air blow-off, hot air drying Max. workpiece dimensions: length 1400 mm Max. workpiece dimensions: depth 2000 mm Max. workpiece dimensions: height 10 mm Max. workpiece  ...

3 pcs proportional valves + control unit, R900948284 + VT-HNC100-2…, Rexroth, used Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - The parts were removed from die-casting machines. The scope of delivery consists of: 3 used Rexroth proportional valves. It is possible that the valves function without any problems or that some may require refurbishment. The current market price of the new valve is approximately € 20,000. Our selling price is € 490 per unit. 1 used Rexroth control unit VT-HNC100-2-30/P-I-00/000. These control units are no longer available on the market, but are necessary for these valves. Our selling price is € 990. Applies to both items. Sale ...

The machine is in good technical condition, after prior agreement it is possible to test it. Including complete renishaw probe and 4 full cnc axes kitagawa. Possibility to sell also clamps, vices, lang system.

x-travel: 800 mm y-travel: 750 mm z-travel: 770 mm Control: FANUC Prof 3/A rapid travel x/y/z: 30000 mm/min palets changer: 630 x 630 table weight: 1200 Kg spindle speed:: 14000 U/min spindle taper: HSK A 63 spindle motor: 30/25 kW tool change unit: 40 pos distance spindle center to table: 100-850 mm Internal cooling system: weight of the machine ca.: 17 t dimensions of the machine ca.: 7,9 x 4,2 x 3,3 m Equipped with: - Fanuc Professional 3/A CNC control - Coolant through spindle - Pallet changer - Tool changer (HSK-A63) - Knoll coolant system (renewed) - Chip conveyor - Mütek briquette press (2015) The machine has been used reliably in single-shift operation in recent years, operating hours: Spindle hours: The scope of delivery includes numerous HSK-63 tool holders – both those currently in the machine and a complete Euro pallet with additional tool holders. - Two clamping towers  ...

Key data: 635 mm, 510 mm, 460 mm

Vertical CNC Machining Center Manufacturer Deckel Maho Type DMC 635V Year of manufacture 2005 Control Siemens 840D ShopMill + memory card Travel X/Y/Z 635/510/460mm Spindle speed max. 8,000 rpm Tool holder SK40 20 Compartment Tool Changer Chip conveyor Clamping area 790 x 560mm 4. Axle manufacturer Lehmann The machine is in top condition, geometry very good. Machine will be available from July 2026. For more information, I am also available at 01778957069 at any time. Whatsapp is also possible.

Fabricante / Modelo JOHNFORD Modelo SV-41 + DIVISOR 4º/5º EJE Año de fabricación 2007 CNC HEIDENHAIN iTNC 530 Mesa Dimensiones mesa 1.200 x 600 mm Peso máximo permitido en mesa 1.200 kg Recorridos y avances Recorridos (X / Y / Z) 1.050 / 610 / 610 mm Distancia desde nariz husillo a mesa 100-710 mm. Distancia desde centro husillo a columna 640 mm. Avance rápido (ejes X, Y) 30.000 mm./min. Avance rápido (eje Z) 20.000 mm./min. Avance trabajo 12.000 mm/min. Cabezal Cono husillo BT-40 Velocidad máxima husillo 60-10.000 rpm Potencia husillo 7,5 / 11 kW Cargador automático de herramientas Tipo cargador Bidireccional RANDOM Posiciones cargador herramientas 20 Diámetro máximo herramienta 100 mm Longitud máxima herramienta 320 mm Peso máximo herramienta 10 kg Equipamiento Refrigeración interna 20 Bar INCLUIDO 2 evacuadores de viruta longitudinales IN ...

Code: 0288 Brand: SAC Model: F 12 Automatic working center for door and wooden window frames Technical data: Tenoning side : End cutting circular saw - Blade diameter mm 400 Motor power Hp 4 Horizontal positioning with indexing stops N° 2 tenoning spindles each lenght mm 320 Max tools diameter mm 320 Spindle diameter mm 50 Motors power each Hp 10 Max thickness of pieces mm 100 N° 2 suction inlets mm 130 Automatic table with guideline Profiling side: N° 4 profiling spindles each lenght mm 270 - Spindle diameter mm 50 Motors power each Hp 10 N° 4 suction inlets mm 130 Glass bead recovery device - Motor power Hp 3 - Blade diameter mm 200 Exhaust outlet diameter mm 60 Glass bead recovery device - Motor Hp 3 Exhaust outlet diameter mm 100 Adjustable feed speed Return roller conveyor Overall dimensions - tenoning machine : mm 2900 x 240 ...

x-travel: 660 mm y-travel: 500 mm z-travel: 600 mm table surface area: 630 x 500 mm spindle taper: SK 40 spindle turning speed range: 20 - 6.300 U/min feeds: 30 m/min control: PHILIPS CNC 532 internal coolant system feed: 40 bar total power requirement: 50 kW weight of the machine ca.: 13,3 t with rotary pallet changer and hydr. swivelling head (horiz./vert.) Accessories: chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1500 mm y-travel: 650 mm z-travel: 650 mm size of pallet: 1740 x 650 mm spindle taper: SK 50 spindle turning speed range: 25 - 6000 U/min feeds longditudinal/cross/vertical: max. 8 mm/min rapid traverse longitudinal and cross: 26 m/min rapid traverse vertical: 20 m/min spindle throat: 665 mm distance spindle nose and table: 200 / 850 mm drilling in full material: 50 mmø threading: M 45 ATC: 60 Pos tool diameter: 125 mm wotkpiece diameter with 2 vacant positions: 260 mm workpiece length: 400 mm weight of tools max.: 20 kg spindle drive: 18,5 kW control: MAZATROL M PLUS Accessories: chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3000 mm, 850 mm, 800 mm

For sale Doosan 5-axis machining center type 850 LSR. equipped with a Fanuc control system, Key technical data (VCF 850LSR Travel (X/Y/Z): 3000 / 850 / 800 mm Table dimensions: 3500 x 870 mm Maximum table load: 3500 kg (incl. integrated turntable) Integrated rotary table (C-axis): Ø 800 mm B-axis (spindle inclination): 220° (+110° / -110°) Spindle speed: 12,000 rpm (standard) Spindle power: 18.5/22 kW (Fanuc) Spindle taper: BT40 (BIG-PLUS) Tool magazine: 60 stations (chain magazine) Rapid traverse (X/Y/Z): 40 m/min Machine weight: approx. 24,000 kg The machine is available from stock, subject to prior sale. For more information; Send an e-mail to chrismachinematch.nl

CNC controller: SIEMENS 840D solutionline Operate Axes X-axis travel mm: 630 Y-axis travel mm: 800 Z-axis travel mm: 850 Worktable Number of pallets: 12 Table dimensions mm: 500x500 Max. workpiece weight kg: 600 Spindle Spindle speed rpm: 18000 Tool system Tool holder: HSK-A63 Tool magazine slots: 303 Equipment Chip conveyor Rotating inspection windows Rinsing gun Blowing air through spindle center selectable via M-function High pressure pump Tool breakage probe Coolant gun MPC – Machine Protection Control Infrared probe CE Round pallet storage Cooling Cooling through the Spindle Center bar: 80 Tank capacity: 980 Machine running times Under power: 46048 Spindle Working: 29258

Heating power : 7.5 KW Drive : 0.37 KW Medium : Water

6SL3040-1MA00-0AA0 SINAMICS S120 CONTROL UNIT CU320-2 DP SINAMICS Control Unit CU320-2 DP with PROFIBUS interface without CompactFlash Card As good as new. The device was only installed once briefly for testing. Was then replaced by another model. Comes in the box according to the picture, which is not the original box: Sale without warranty. VAT. The price is Euro 250,- + VAT. Pick-up in Bielefeld Jöllenbeck, or free shipping. You will receive replies to messages within our business hours. Mon - Thu 8:00 am - 3:30 pm / Fri 8:00 am - 1:00 pm

The machine is in good technical condition, testing is possible after prior agreement. The tool magazine does not work, manual shifting is necessary, otherwise problem-free operation

Fabricante KONDIA Modelo A-10 Año 2008 CNC HEIDENHAIN TNC 530 Mesa Superficie mesa 1.200 x 500 mm. Ranuras en T (nº, anchura, distancia) 5, 18, 100 mm. Distancia mesa -suelo 885 mm. Distancia mesa – nariz husillo (min/max) 140 / 750 mm. Peso máximo permitido sobre mesa 850 kg. Recorridos y avances Recorrido longitudinal (X) 1.000 mm. Recorrido transversal (Y) 500 mm. Recorrido vertical (Z) 610 mm. Avance rápido ejes X/Y/Z 30.000 mm./min. Cabezal Cono husillo ISO 40 DIN 69871 Velocidad máxima husillo 8.000 rpm Potencia Husillo 22/28 kW Cargador automático herramientas Tipo Cadena Cambio Ramdom Posiciones almacén 40 Anchura máxima de la herramienta con posiciones adyacentes libres 150 mm. Anchura máxima de la herramienta sin posiciones adyacentes libres 75 mm. Longitud máxima herramienta 300 mm. Peso máximo herramienta 6,5 kg Equipamiento Refrig ...

Key data: 5 , 10

Oil lubricated screw compressor Cooling: Air-cooled design Drive: Efficient IE3 motor, belt drive Control: Speed-controlled with frequency converter Control: Infologic² Connect Refrigeration Dryer: Integrated Filtration optionally available Performance data Volume flow at operating pressure 7.0 bar 0.33 - 0.75 m³/min Operating pressure min. / max. 4.0 / 10.0 bar Total power consumption at 9.5 bar / full load 7.7 kW Rated power motor; IP55 5.5 kW Oil volume 3.2 lt Pressure dew point refrigeration dryer approx. +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C Cooling air demand 1140 m³/h Free fan pressure 30 Pa Sound level 61 dB(A) Voltage / PH / Frequency 400 / 3 / 50 V / Ph / Hz Refrigeration dryer power (230V/50Hz) 0.19 kW Dimensions and weight Length x width x height 1540 x 600 x 1375 mm Weight 230 kg Compressed air outlet 1/2 "  ...

Key data: 7 , 10 , 1

Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: Aircontrol 5.0 (4-20mA) Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator Performance data Volume flow at operating pressure 7.0 bar 0.28-1.25 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 9.3 kW Rated power motor; IP55 7.5 kW Oil quantity 3.5 lt Pressure dew point refrigerant dryer (20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above coolant temperature 8 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 62 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dryer power (230V/50Hz) 0.27 kW Dimensions and weight Length x width ...

For sale is a Fanuc control panel Type AO5B-2301-C375 Fully functional Billing: Invoice will be issued. According to §19 para. 1 of the German VAT Act, no turnover tax is charged (small business regulation) Delivery: Pick-up on site or shipping possible. Shipping costs are borne by the buyer If you have any questions, please feel free to contact us.

The machine is in good technical condition, testing is possible by prior arrangement.

The machine is in good technical condition, after prior agreement it is possible to test it. Operating hours: 12,041h Parameters: Control system: MAZATROL MATRIX NEXUS Worktable length: 1300 mm Worktable width: 530 mm Spindle drive power: 11 kW Speed: 12,000 1/min X-axis travel: 1050 mm Y-axis travel: 530 mm Z-axis travel: 510 mm Taper: ISO 40 Number of positions in the magazine: 30 pcs Machine weight: 7100 kg

Electronic Cards Temperature Controller up to 3 sets are available

Used Operator Panel OP 15-A1 6AV3515-1EB30-1AA0 Tested

used control panel BA 16 for temperature control with CAN open

Fabricante IBARMIA Modelo ZVH 58 / L3000 Año 2004 CNC Heidenhain iTNC-530 Mesa Superficie de la mesa 3.600 x 1.050 mm. Ranuras en T 7 x 18 H 18 Distancia entre ranuras en T 125 mm. Distancia entre nariz husillo y mesa 25-366 mm. Peso máximo admisible en mesa 4.200 kg Recorridos y avances Curso longitudinal (Eje X) 3.000 mm Curso transversal (Eje Y) 1.000 mm Curso vertical (Eje Z) 860 mm Rango cabezal basculante (Eje B) ± 105º Rango giro (Eje C) ± 360º Avance rápido (X, Y, Z) 30 m/min Avance máximo trabajo (X/Y/Z) 30 m/min Avance rápido eje B 170 rpm Mesa rotatoria integrada Ø mesa rotatoria 1.000 mm. Ø máximo de rotación 1.400 mm. Cabezal Revoluciones cabezal 9.000 mm/min Cono cabezal ISO-50 DIN 69871-AD Potencia motor principal 28,5 kW Par motor principal 240 Nm Cargador automático herramientas Fabricante AITEK Tipo cambio RANDOM Posicion ...

Key data: 762 mm, 508 mm, 508 mm

2023 HAAS UMC-750SS 5-Axis CNC Vertical Machining Center Condition: Used Location: USA Description This 2023 HAAS UMC-750SS is in excellent condition and ready for continued productive service. The machine has been well maintained and represents a strong opportunity for high-speed 5-axis machining. Specifications have been compiled from inspection, operator input, manuals, and OEM sources. Buyers are encouraged to independently verify all specifications, condition details, and availability prior to purchase. Price, location, and specifications are subject to change. Specifications Travels • X-Axis: 30” (762 mm) • Y-Axis: 20” (508 mm) • Z-Axis: 20” (508 mm) • Number of Axes: 5 Spindle • Power: 30 HP (22.4 kW) • Max Speed: 15,000 RPM • Taper: CT40 or BT40 Tool Changer • ATC Capacity: 40 tools Table • Table Width: 19.7 ...

Year of construction: 2004 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 2500 Y-axis travel mm: 920 Z-axis travel mm: 820 Worktable Number of pallets: 1 Table dimensions mm: 3100 Maximum workpiece size (D x H) mm: 900 Spindle Spindle speed rpm: 12000 Spindle drive power kW: 35/25 (40/100%ED) Cooling Tank capacity: 600 Tool system Tool holder: HSK-A 100 Tool magazine slots: 80 Tool changer: Pick-up With free neighboring places mm: 160 With occupied neighboring places mm: 100 Max. Tool Length mm: 250 Max tool weight kg: 12 Equipment Chip conveyor Rotating inspection windows Signal lamp Workarea light Air or water through spindle center RENISHAW Measuring probe Machine running times Under power: 61685 Spindle Working: 18001 Rated power kVA: 82 Basic machine dimensions / weight Length mm: 4523 Width mm: 8436 Height mm: 3267 Weight kg: 26 ...

for Mitsubishi S6R S6R2 S12R GAC Speed control unit 15674-4-01 incl. speed sensor 17301-3-01 incl. plug 234958-12

Dimensions (L/W/H): 8800x2900x2100 mm Weight: 6500 kg Total power requirement: 18-36 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Machining Center Hedelius C60P-2000 Magnum Control: Heidenhain iTNC 530 Year of Make: 2009 Travels: X-axis 2,000 mm Y-axis 620 mm Z-axis 520 mm Clamping area 2,500 x 600 mm Mount: SK 40 Tool Magazine: 56 – Tray Spindle speed: 8,000 rpm Accessories: - Chip conveyor AME KB 448 - Paper belt filter AME PS 120 - LTA suction - Machine hood

GENERAL Project No.: 905821 Quantity: 1 pcs. Manufacturer: SW Schwäbische Werkzeugmaschinen Type: BA 422 Control: Siemens 840 D solutionline Year of Make: 2017 Condition: Used machine Approx (hrs): 18302 Spindle in approx. (hrs.): 4718 DESCRIPTION MILLING 5 axes Travel in X 400 mm Travel in Y 500 (775) mm Travel in Z 425 mm Max. feed speed in X/Y/Z 55/70/75 m/min Max. acceleration in X/Y/Z 8/8/15 m/s2 Feed force in X/Y/Z 15000/15000/2x8000 N Direct displacement measurement system BLOCK - Milling spindle unit Tool holder HSK A-80 Max. speed milling spindle 10000 1/min Max. power at ED 10-40/100% 2x27 kW Max. torque at ED 10-40/100% 2x200 Nm Spindle diameter in the front bearing 80 mm 2 pcs horizontally arranged milling spindle(s) Spindle spacing 400 mm Pneumatic tool system control Chain tool magazine 2x30 stations Max. tool diameter 80 mm Max. ...

Key data: 560 mm, 560 mm, 660 mm

Horizontal BAZ DMG MORI NHX-4000 with 2-fold pallet changer Year of Make: 2017 Control: Celos with Sinumerik 840Dsl Operate Program running hours: 21,000h Technical data: Spindle speed: 10 - 20,000 min-1 (motor spindle speedMASTER)® Drive power: 35/25 KW Torque: 130/85 Nm Tool holder: HSK 63 Number of magazine slots: 60 - Ring magazine Travels: X-axis: 560mm Y-axis: 560mm Z-axis: 660mm C-axis: 0.001° Pallet size: 400x400mm Accessories: 2-fold pallet changer Coolant system for IKZ 70bar - 900 litre tank - paper belt filter Chip conveyor Preparation Renishaw 3D - Probe

x-travel: 2200 mm y-travel: 1600 mm z-travel: 1850 mm control: Mazatrol Matrix Smooth G max. workpiece diameter: dia 2400 x 2000 mm max. table load: 6000 kg size of pallet: 1250 x 1250 mm B - Axis: 0,0001 ° turning speeds: 10000 U/min drive capacity - spindle motor: 37/30 kW max. torque on the spindle: 350 Nm no. of tools in magazin: 120 tool adaptor: BT 50 Rapid Travel X / Y / Z-Achse: 43 m/min dimensions of the machine ca.: 11 x 7,1 x 4,5 m distance spindle /table: 100 - 1700 mm total power requirement: 120 kVA weight of the machine ca.: 57,5 t equipped with: - CNC control Mazatrol Smooth G - B-axis (0.0001°) - ATC 80-fold (BT 50) - Chip Conveyor - 2-fold Pallet Changer - High Pressure cooling through Unit - Chip Conveyor - Renishaw Laser Tool Measur. - Thread Cutting Function -Power-On Time: , Automatic Cutting: The data for this ad was created with ModulMWS - the software solutio ...

Dimensions (L/W/H): 3300x2100x2100 mm Weight: 1500 kg Total power requirement: 14 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.