for used for sale

Fortuna SAM Pretzel & Baguette Line composed of: 1.) Winkler lift tipper, built in 1995 in V2A fairing for Diosna SP 120 A 2.) Dough dividing and circular knitting machine type: KI-5 row, year of manufacture 2017 With pre-scoop Output KI 5 rows: max. 9,000 pcs./h Recommended cycle rate 20 ' Weight range: 72 - 330 g Main weight range: 72-77g/132g Weight accuracy: ± 2g at 72-92g ' ± 3 g at 100-160g ' ± 6 g at 275-330g ' ' Machine hopper: approx. 20-25 kg of dough (without oiling) ' Spreading belt pitch: 5 rows mm ' Connection: 4.5 kW Voltage: 400 V - 3 ph - 50 Hz Masch-EDP-Nr.: On request è Chamber (honeycomb) drums 5 pieces Sizes 2-5.7 è 3 sets of interchangeable pistons (Piston-Bushing System) è 2 inner knitting drums Interchangeable pistons (set = 5 pieces each) are recommended: Piston size Ø 50/65 Piston size Ø 65 Piston size Ø 40/65 The following ...

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: Base jaws for key bar chucks, helical toothed - Jaw width: 14 mm -Dimensions: see photo technical drawing -Total dimensions: 47/42/H20 mm -Total weight: 0.6 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws wedge bar chucks, interchangeable jaws power chucks -Top jaws: base jaws for wedge bar chucks, helical teeth -Jaw width: 32 mm -Dimensions: see photo technical. drawing -Quantity: 1 sets of interchangeable jaws available -Total dimensions: 125/95/H45 mm -Total weight: 2,9 kg

Description: Spindle Moulder Serial Number 61.02.003.16 Table 2300 x 450 mm Fixed Speeds: 3500 / 4500 / 6000 / 8000 / 10000 r.p.m Axle Speed 15000 r.p.m. Interchangeable axle serial number: 61.02.003.16, Approx. Onsite Dimension. (l x w x h): 2,300 x 2,700 x 1,700 mm, weight approx.: 750 kg

Description: Serial n°: 200.07.006.15 maximum adhesive thickness in 10 mm maximum panel thickness 60 mm maximum thickness of rolled material 3 mm minimum piece length 140 mm minimum workpiece width 70 mm maximum feed rate 12 m/min electric height adjustment pre-heating zone granular gluing system glue container below the food chain changeable glue tank suitable for PUR glue spraying system straightening unit End cutting unit 2 motors flush/radial/bevelling stations 1 Edge copying unit 1 motor scraping unit Edge scraper, Flat scraper polishing unit strip magazine synchronised aggregate NC axis(es) machine model from left to right machine length in 5.140 mm FORMAT 4 E-MOTION control Loading cost to be defined serial number: 200.07.006.15, edge thickness: 10 mm, workpiece thickness: 60 mm, feed: 12 m/min, control: FORMAT 4 E-MOTION, total power approx: 11 kW, Approx. Onsite Dimension. (l x ...

Description: ENGINE John Deere engine with 230 h.p.,  ,6 cylinders and 6800 c.c TECHNICAL DATA. Machine weight without headstock: 23.500 tons. approx Width of the machine: 2900 mm. Leveling cabin Crane outreach: 14.300 mm Newson series no: AB02751 FM 60 head with serial no.: 94011004 Head weight: 1400kg Hours according to counter: 19.714 hours approx ,  ,  ,  ,  ,IMPORTANT The buyer is responsible for all related loading of the equipment. The machine is loaded by its own means. , Is needed a , platform ,truck Approx. Onsite Dimension. (l x w x h): 11,250 x 2,950 x 3,600 mm, Vehicle identification number: AB02751, weight approx.: 24,700 kg

pulling force - max.:2,5 t max. ram stroke:1000 mm max. workpiece diameter:40 mm Broaching speed:60 m/min. return speed:20 m/min. total power requirement:24 kW weight of the machine ca.:6 t dimensions of the machine ca.:1,7 x 2,4 x 4,77 m clamping plate:320 mm

gebr. Kantenanleimmaschine Fabrikat: Format 4 Typ: Tempora 60.12/2 E Baujahr: 2020 -unüberholt- ohne Gwährleistung e- Motion Steuerung Oberer Druckbalken: - Druckbalken aus geschweißter Verwindungsstreifer Stahlkonstruktion. Motorisch gesteuert einstellbare Werkstückhöhe 8-60 mm über e-motion Steuerung. - Glatte,zweireihig versetzt angeordnete Oberdruckrollen, die dafür sorgen,dass eine gleichmäßige Druckverteilung auf das Werkstück stattfindet. - Werkstückabstandüberwachung durch eine Ampel. - Drehteller Kantenmagazin für Rollenkantenmaterial 0,4-3 mm: - Ø des Drehtellers:800 mm - Streifenmagazin für 12 Stück: 10 mm Kanten - Kantenzufuhrung für Rollen- und Streifenmateral tempora Serie - Pneumatisch gesteuertes, Teflonbeschichtetes Leimaggregat für 1,5 Kg EVA Granulat - mit synchronisierter Leimrolle und Schnellwechselsystem. Geeignet f ...

new corpus turning up machine - fixed elements Brand: Formetal Type: RT.90F technical data: - fixed elements Transport input length 2.500 mm Transport output length 1.000 mm Transport width 600 mm Working height infeed conveyor 700 mm working height outfeed conveyor 250 mm Transport speed 10 - 25 m/min. (with inverter control) Different speed for load and unload max. weight 100 kg - corpus turning up machine RT.90F without electric equipment OPTIONAL: - Safety light barrier (infeed and outfeed) - electric box with SIEMENS PLC S71200 - Safety fence

Bread Roll Line Stamping-Cutting Fortuna KM Premium K6 Condition: very good Suitable for the production of Kaiser rolls, shaped rolls, sliced rolls and other round and long-shaped small baked goods Hourly capacity: 7.200 pieces at 20 strokes per min at 6 rows Weight range: 40-100g Dimensions (LxWxH): 1150 x 445 x 306 cm This line consists of: 1. Pre Portioning System Fortuna TPT Year of construction: 2010 Hopper capacity: 160 kg dough Feeding the dough to the head machine using star wheels Additional - oiling of the funnel walls Control of the dough feed via light barriers Funnel mounted on a separate frame and movable on the frame for cleaning Insight mirror for dough control 2. Dough Divider And Rounder Fortuna KM Year of construction: 2019 Weight range: 40-100g 6-row head machine 2 adjustable flouring units for hopper and rounder Adju ...

Dough Divider And Rounder Fortuna Semi Automate 4 Condition: completely reconditioned Divides the dough into 30 equal sized pieces Dough charge: 1.200-3.300 g Dough range: 40 - 110 gr Incl. red rounding plate Base frame optional (also available with castors)

Dough Divider And Rounder Fortuna Semi Automate 4 Condition: completely reconditioned Divides the dough into 30 equal sized pieces Dough charge: 1.200-3.300 g Dough range: 40 - 110 gr Incl. red rounding plate Base frame optional (also available with castors)

Dough Divider And Rounder Fortuna Automat A 4 Fully automatic dough divider and rounder Makes 30 dough pieces on one plate Dividing without rounding function Dough insertion: 1.200-3.300 g Weight of dough pieces: 40-110 g Incl. rounding plate Optionally with base (stationary or mobile)

Dough Divider And Rounder Fortuna Automat A 4 Fully automatic dough divider and rounder Makes 30 dough pieces on one plate Dividing without rounding function Dough insertion: 1.200-3.300 g Weight of dough pieces: 40-110 g Incl. rounding plate Optionally with base (stationary or mobile)

Dough Divider And Rounder Fortuna Automat A 4 Fully automatic dough divider and rounder Makes 30 dough pieces on one plate Dividing without rounding function Dough insertion: 1.200-3.300 g Weight of dough pieces: 40-110 g Incl. rounding plate Optionally with base (stationary or mobile)

Dough Divider And Rounder Fortuna KM 2 Year of construction: 1998 Condition: good, working Capacity: ca. 3200 pieces/h Weight range: 35-95 g Adjustable rounding space height, rounding time rounding speed and flour volume Movable with brakes

Dough Divider And Rounder Fortuna Automat A 4 E Fully automatic dough divider and rounder Makes 30 dough pieces on one plate Dividing without rounding function Motorized tiltable head Dough insertion: 1.200-3.300 g Weight of dough pieces: 40-110 g Incl. rounding plate

Case erector APE model Form 1200 Year: 1998 Speed: 900 c/h Gluer Mesa Included conveyor

Carton forming machine APE mod. FORM 1200 BB Machine for bag in box Speed: 900 c/h Year: 2001 Hot melt closing box. Safety protections.

Box forming machine APE – FORM 1200 HM Year: 1996 Speed: 900 C/H Gluer NORDSON Safety protections.

Box forming machine APE BAG IN BOX | FORMA BB HM Year: 2012 Speed: 1.000 cartoni/h Machine without gluer Safety protections.

Box forming machine TMG | FORMEC Year: 2002 Speed: 5.000 bph Gluer NORDSON Safety protections

Box forming machine SGE | 2007 Year: 2007 Speed: 8.000 bph Model: Formacartoni Gluer included Safety protections

Forklifts, forks, forks with anti-slip coating Payload: approx. 2.5 ton. Tine length: 1600 mm Tine width: 100 mm Tine thickness: 50 mm (40 mm metal + 10 mm rubber coating coating)Fork carrier height: 405 mm - suitable for tine holder: FEM 2 Form B - Rubber coating as anti-slip coating and for protecting transported goods ? Rocker arm lock Net weight: 145 kg mint condition, unused For a 2.5 ton. Forklift.; used

Slab formwork, wall formwork, wooden beams, props, formwork accessories used immediately operational. We are happy to answer questions phone 06190-93449-0 The material can be visited by appointment, we buy also. Note also our other ads! We can offer you several thousand square metres of used formwork, scaffolding and tools - ask us!

Assortment of different formwork devices and formwork aids â?¢ various formwork accessories: system RASTO, MANTO, RASTER, PERI e.g. anchor nuts, anchor plates, Anchor rods (various lengths) â?¢ Formforce, formwork consoles, Formwork elements, belts, etc. â?¢ Bearings and transport containers, such as Boxes made of steel sheet, lattice boxes â?¢ scaffolding accessories, â?¢ see, among others, a list of materials and photos, manufacturer HÃ?NNEBECK, MÃ?BA, ISCHEBECK, PERI, PASCHAL and others. Pricing: from stock Hattersheim, purchase of partial quantities also possible. everything subject to intermediate sale price on request

Case erector MONDO & SCAGLIONE hot melt mod.378-C Year: 2006 Speed: 6/25 C/MIN Hot melt Gluer System PREO PLC Siemens S7 Safety Protections

Case erector OMA hot melt – mod. AC 1000 HM Year: 2016 Speed: 2.000 cases/hour Machine suitable for american cartons Gluer Nordson Control panel with PLC and touch screen Safety protections CE

Box forming machine MONDO&SCAGLIONE Model: 376/c. Year: 1996. Speed: 23 cycle/minute. Gluer NORDSON. Type of clousre: glue. Manual available. Safety protections.

Box forming machine EUROTEMA - FC-2000HM Year: 1997. Speed: 2.000 cartoni/ora. Model: FC-2000HM. Type of box: American. Closure system hot-melt. Safety protections.

Feed boxes Bortolin Model: Feed boxes Year: 2004 Speed: 15.000 b/h Safety protection

Box forming machine – KETTENER Year: 1997 Speed: 12.000 bph Model: KAF 2000 R Safety protections.

Box forming machine SIAT – 150 C/H Year: 2015 Speed: 10 C/minute Closing box with adhesive taps. Safety protections.

Box forming machine BORTOLIN – FOC 23/30 Year: 2000. Speed: 8.000 bph. Model: FOC 23/30. Gluer NORDSON. Safety protections.

Box forming machine MONDO&SCAGLIONE | 378/C Year: 2005 Speed: 1.500 boxes/h Model: 378/C Formation of the horizontal carton Gluer NORDSON Safety protections

Box forming machine BORTOLIN-KEMO Year: 2006 Speed: 7.000 bph Model: Formatrice cartoni Gluer Safety protections

Box forming machine OMA | 40 HM Year: 2009 Speed: 6.000 bph Gluer Safety protections

Welding edge former, edge former, edge chamfering machine TRUMPF chamfers of steel plates for weld seam preparation type TKF 103 Sheet thickness: 4 - 25 mm Bevel length max: 10mm Bevel angle: 30 Power: 2000 Watt Mains connection: 220 Volt, 50 Hz - equipped with guide bracket for 30 bevel angles - regrindable butt steel for high tool utilization - several impact steels - Support plates 6, 8, 10, 12, 14, 16, 18, 20, 22 mm for different material thicknesses For bevelling straight and curved edges with at least 40 mm radius. For bevelling edges on flat and curved workpieces as well as tubes with an inner diameter of at least 80 mm. Weight: 14 kg; used

LPG forklift, gas forklift STILL type RX 70-16T Series No. 517314G00021 Year of construction 2016 Nominal load capacity 1600 kg Lifting height 4920 mm Fork length 1000 mm Fork carrier width 980 mm Construction height 2160 mm Total width 1100 mm Total length without forks 2200 mm Net weight 3040 kg - Triplex mast with full free stroke 1550 mm - hydraulic side shifter - LPG electric drive - 4-cylinder Volkswagen LPG engine with 30 kW - hydraulic auxiliary steering - front work light- reversing - warning light (blue) - rear hazard warning lights (yellow) - 4-wheel super elastic, solid rubber - front tires 18X7-8 SE / rear 18X7-8 SE - according to operating hours counter 22663 operating hours - New TÜV-UVV test good condition; used

Diesel - Forklift, compact stacker MORA type M80CS Fabr. No. 20087 Year of construction 2006 Nominal load capacity 8 ton. Lifting height 3800 mm Fork length 1800 mm Fork carrier width 1460 mm Construction height 3030 mm Total width 1460 mm Total length without forks 3350 mm Net weight 12740 kg- Duplex mast with 1950 mm Free stroke - 4 cylinders PERKINS diesel engine - completely enclosed cab with heating - electrohydraulic tilting device for the cab - hydraulic auxiliary steering - 2 work lights front, 1 piece work light rear - yellow warning - flashing light on the canopy - solid rubber tires (front 28 x 10 x 22) (rear 250/70 - 16) - 9646 operating hours read - UVV-TÜV approval New good condition rental on request; used

Gebr. Partial formwork, length 8 m Steel formwork, wood planked chamber dimensions: W = 2.80 m, H = 2.00 m

Forklift arms for robots Brand new manufactured

MF-25 Corner Forming Machine

A vacuum former from the US company The Channel Letter Bender. The machine was bought in 2017 and has operated over the years around 30 hours, so it is practically brand new and is well maintained. All the technical specifications are in the PDF. Shipping dimensions 1650 mm x 2400 mm x 2400 mm ( L x W x H ) ( 65 inch x 95 inch x 95 inch ) weight 700 kg ( 1543 lbs ) Operating area 3000 mm x 3500 mm ( 118 inch x 137 inch )

Description: BENZ Type of aggregate: Lock recess trimming aggregate type FORTE Product Line: Classic Line (grease lubrication) Tool outlet: 1x Whistle Notch Ø20 mm (or Ø16 mm with reducing sleeve) with an additional saw blade alignment Ø30 mm (pitch circle diam. 52 mm) and 1x collet chuck ER16A (clamping range 1-10 mm) on the back The price is only valid for aggregates with standard interface with HSK-F63 interface and the torque supports for the following machines: Biesse, Busellato, Felder, Hiteco, HOMAG, IMA, Masterwood, Reichenbacher, SCM 1 point, SCM 3 point, Weinig. Further torque supports on request. The unit can be delivered with different machine connections. After the purchase please let us know which machine connection / torque arm the unit must be equipped with. Please refer the possibilities in the appendix. The aggregates in the pictures represent only a selection of  ...

Garage Schalungensanlagen Rothmund / tar we offer two complete used garage formwork The plants come from the assets of an insolvent paver of different concrete elements (ceiling, walls, garages and modules). A. garage formwork 2 Rothmund / tar and ueberarbeitet in 2004 by LAIER 5.62 X 2.78 m length and 2.95 x 6 as a fixed size, including ancillary units with spread rungsanlage to the higher level (B). Garage formwork 1 Rothmund special machines For 6 m, 6.5 m and 7 m garages, width 2.95 m set consisting of: 1.1 Set base frame, 2.1 retractable core with extension length adjustment 3.1 rear rollers wall 4.1 front rollers wall 5.2 Longitudinal walls 6.1 Set scope bracket 7.1 Set formwork for electric gate 8.1 Set hydraulic tensioner (down, sideways) 9.1 Set hydraulic system with control panel 10.1 electrical control cabinet Shaker drive 11 incl. auxiliaries (C). 15 Pallets for precast ga ...

Module formwork system EBAWE / Eilenburg we offer a used module formwork system (year 1996) The plants come from the assets of an insolvent paver of different concrete elements (ceiling, walls, garages and modules). Plant for the production of space modules in the basic sizes 6000 x 2400 mm, the height can be varied from 2,850 3.100 mm. Thus, the maximum floor height is 3,250 mm. Technical description: Taktfertigung manufactured space cells made of reinforced concrete with at least one open long side without soil in different sizes. Window and door openings, as well as large-scale breakthroughs can be provided. The system consists of the following components: 1.1 Module formwork for the production of space modules) -is the form of Chamber for the production of concrete item (space cell) -The two sides are at the stationary side walls arranged swivel -Vibrators are attached to all w ...

Hünnebeck Manto large frame formwork, in need of refurbishment, approx. 1350m2 Ask our special item list

270 sqm Hünnebeck Rasto wall formwork immediately operational BOM on request

Anchor rods DW 15, DW 20 and DW 26.5mm, different Lengths Anchor rods DW15, buttoned (30cm + 10cm approx. 15) 3,30€/piece 102 Anchor rods DW15, version shaft anchor, 3,30€/piece Hexnuts and full plates 26.5mm