for used for sale

Formingmachine for meat rolls (frikandellen afkorter) Belt width: 700mm With outfeedbelt

Product number: 1854J Type: NM-500 Serial number: 10062 Year of construction: 2013 Capacity: max 3000 kg/hr. Speed: 25 - 100 strokes/min. Belt width: 510 mm Hopper: 454 kg Forming width: 483 mm Stroke length: 228 mm Stack height: max 152 mm Forming pressure: 2.5 - 17.2 Bar Infeed height: 2000 mm Outfeed height: 850 mm Air pressure: 6 Bar, 28.3 L/min. Water: 2 Bar, 3.8L/min. Power: 420V, 50Hz, 32A Dimensions: 4600 x 1400 x 2850 mm Weight: 3650 kg With Tender-Form® and Paper interleaver Including lifter for 200L meat bins, 2 pc. tool trolley and several forming plates

Product number: 1916J Type: NM-500 Serial number: 10032 Year of construction: 2012 Capacity: max 3000 kg/hr. Speed: 25 - 100 strokes/min. Belt width: 510 mm Hopper: 454 kg Forming width: 483 mm Stroke length: 228 mm Stack height: max 152 mm Forming pressure: 2.5 - 17.2 Bar Infeed height: 2000 mm Outfeed height: 850 mm Air pressure: 6 Bar, 28.3 L/min. Water: 2 Bar, 3.8L/min. Power: 460V, 60Hz, 26A Dimensions: 3300 x 1150 x 2500 mm Weight: 3650 kg

The machine could also be used as a transport belt conveyor. Transport input length 2.000 mm Transport output length 1.000 mm Transport width 600 mm Working height 500 - 700 mm Transport speed 7 - 35 m/min.

Max. Output: 300cycles/min, max. stacking speed: 30packs/min.

Overall size: 3950 x 3700 x 300 mm Door size: 3600 x 3500 mm

FORMING MACHINE KOPPENS, MODEL: VM 600 HS Technical description: Machine number: VM 600 HS-481 Power supply: 380 V, 45.47 A, Ph 3, 50 Hz Power: 22.09 Kw Weight: 1675 Kg Conveyor width: 600 mm Dimensions: 2400 x 1300 x 2100 mm Different formats available

FORMING MACHINE KOPPENS, MODEL: VM 600 Technical description: Serial number: VM-600-55 Power supply: 415 V, 3 Ph, 50 Hz, 23 A Power: 11,31 kW Conveyor width: 600 mm Form size: (7x) 60 mm Weight: 850 Kg Dimensions: 2000 x 900 x 1950 mm

FORMING MACHINE KOPPENS, MODEL: VM 600 HS Technical description: Serial number: VM 600 HS-281 Conveyor width: 600 mm Weight: 1.750 Kg Power supply: 380 V, 3 Ph, 50 Hz, 45 A, 22 kW Dimensions: 2400 x 2100 x 2200 mm

FORMING MACHINE, KOPPENS TYPE: VM 400 HD Technical description: Serial number: VM400 HD-1717 Power supply: 380 V, 3 Ph, 50 Hz, 7,67 kW, 16.57 A Weight: 830 kg Mesh belt conveyor Conveyor width: 400 mm Dimensions: 2000 x 950 x 2350 mm

FORMING MACHINE KOPPENS, TYPE: VM 400 HS Technical description: Serial number: VM 400 HS-1481 Power supply: 380 V, 3 Ph, 50 Hz, 23 A, 7,77 kW Weight: 810 kg Dimensions: 1900 x 900 x 2200 mm

FORMING MACHINE, FORMAX TYPE: PFM-19 Technical description: Serial number: 416 Power supply: 380 V, 3 Ph, 50 Hz, 27.6 kVA, 42 A Conveyor width: 550 mm Format diameter: (3x) 120 mm Dimensions: 3000 x 1000 x 2700 mm The Fl9s hydraulic injection forming system offers extremely accurate weight control and the ability to manufacture a wide range of products at different temperatures. It achieves high performance and forms products with a natural texture and excellent appearance.

Product number: 2704EG Type: PFM-12 Serial number: 171 Capacity: 20 - 65 strokes/min. Forming width: 12", 30.54 cm Hopper: 500 Lbs. / 226 kg Belt width: 380 mm Compressed air: 7 Bar, 140 l/min. Power: 3 x 460V, 60Hz, 17kW Dimensions: 2950 x 1100 x 2050 mm Weight: 1950 kg With Tender-Form and paperfeed interleaver. Including various parts and moulds.

bushing cut-off diameter range 14-22 mm number of dies 7 number of stations 8 cutting length 4-67 mm shaft length under head 4-75 mm output - pieces/min 175 press power 200(126) to max. outside dia. of round pie 42 mm

FORMING MACHINE, KOPPENS TYPE: VM 400 Technical description: Serial number: VM 400/30-1517 Power supply: 380 V, 3 Ph, 50 Hz, 4,94 kW, 12.39 A Weight: 550 kg Mesh belt conveyor Conveyor width: 400 mm Dimensions: 2400 x 680 x 2270 mm

Rectangular duct line from FORMTEK International. 2 reel unwinders/5TB Max Hydraulic drive. Reel width 1000/1250/1500mm 05 to 1.2mm Mild steel (galvanized) Straightening block Z stiffening Male and female clip notching. Combined shear/folder 380V/3P/50Hz CE/EXW certified PRC factory POWER UP IN PERFECT CONDITION CHANGE OF ACTIVITY

Formatic mobile burger forming machine, S Series 180 Stacking M/C, burger form: Ø 110 mm, total dimensions: 1500 mm x 950 mm x 1900 mm. Missing outfeed belt.

The workpiece return transport consists of an air cushion table with pneumatic tilting movement, complete with pusher, return conveyor with motorised belt and a not-driven roller conveyor. The panel comes out of the edge banding machine onto the air cushion table which tilts over and drops it, with the aid of the pusher, onto the return belt, situated at a lower level. The air cushion table has transfer belts to takeover the parts from the edge banding machine. Dimensions of air cushion table 1.200 x 2.400 mm Belt width 1.300 mm Installed power 3 kW workpiece return transport is deliverable for basic edge banding machine length 3.500 up to 12.500 mm

Intelligent transport systems Brand: Formetal Type: diverse Wehrmann offers tailor-made transport systems for a wide variety of requirements. No matter whether it is about the transport of carcasses, single plates or stacks. For every transport task, however unusual, there is the optimal system, with a superordinate control that can recognize parts, send them on the right journey and integrate the connected machines. Roller conveyors, chain transports, webbing systems, link belt conveyors, turning stations, carcass erectors, carcass turners, etc ... All of these transport units, which are tailored to your requirements, are provided with a current touch-panel control computer, via which a complex line can be centrally and simply controlled. With a perfect design and tuning of the mechanical components, with a frequency-controlled speed control, both high feed rates can ...

New stack turnover machine Brand: Formetal Type: RT.180 PL Technical data: Usable width of roller conveyor: 1.000/1.200 mm Length of roller conveyor: 3.300 mm Min. stack height: 1.150 mm, max. stack pelhöhe: 1.600 mm Min. stack width: 300 mm Max. stack length: 3.000 mm Max. stack weight: 2.800 kg In- and outfeed roller conveyor - Roller Ø 89 mm - Distance between roller 190 mm - Drive with fix rotation speed motor 10,5 m/min. - Installed electrical power: 5,0 kW - Pneumatical door opening system - Stack turner RT.180PL 1000 Max. stack width: 1.000 mm Working height (for roller conveyor width 1.000 mm): 250 mm - Stack turner RT.180PL 1200 Max. stack width: 1.200 mm Working height (for roller conveyor width 1.200 mm): 400 mm

4 Cyl. Ford industrial engine, alternator, tractor Ford 5000, pass.f. New Holland Mähdr. 8030

Formlabs Form 3L Wholesome Package including Form Wash L and Form Cure L. All devices ran for a very short time: approx. 50 hours. Year of construction 2022, commissioning October 2022. Accessories: 2L each of Resin Tough 2000, High Temp, Rigid 10K and a separate tank for each type of resin., Installation space in mm (x/y/z): 335x200x300, Layer thickness: 25-300 microns, laser power: 2x 250mW, Resin refilling automatic or manual: Automatically, Size laser spot: 85 microns, Machine dimensions in mm (w x d x h): 775x520x735, Weight in kg: 48, Power supply: 100-240VAC, 7.5A, 50/60Hz, 650W, network connection: Wi-Fi (2.4, 5GHz), Ethernet (1000Mbit), USB 2.0, Size laser spot: 85 microns, Machine dimensions in mm (w x d x h): 775x520x735, Weight in kg: 48, Power supply: 100-240VAC, 7.5A, 50/60Hz, 650W, network connection: Wi-Fi (2.4, 5GHz), Ethernet (1000Mbit), USB 2.0

Stapelauslage Zusammentragmaschine - Stack Delivery Gatherer Form ALL Form - Collect -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Bread Roll Press Fortuna Manufacturer : Fortuna In Baker's Condition

Gr. Pulling force 10 to, gr. Stroke 1000 mm , cutting speed 7.5 m/min, return speed: 24 m/min, weight: 6.2 to, built: 1987

Gr. Pulling force: 16 to., gr. Stroke 1250 mm, Gr. Cutting speed: 5, 6 m/min Gr. Return speed: 30 m/min

Basic-outdated Fortuna Gr.4 machine was anew varnished completely dismantled and wearing parts were renewed. 6-month guarantee taking back old machine possibly.

We offer two Ford gas cogeneration plants for sale. Synchronous generator: Emod 19 KVA Engine: Ford Voltage: 230 / 400 3 phases Frequency: 50 Hz Speed: 1500 rpm COS phi: 0.8 Starter: 24 V Weight: 900 kg Year of construction: 1996 Hours of operation: 24,000

Three-jaw Chuck Forkardt compensating voltage -Verschiebeweg 35 mm -Jaw stroke 2, 5 mm Radial compensation ability 0.5 mm Speed 5000 RPM Lining very good condition dating back to location resolution of a grinding machine manufacturer New price ca 25000 euro Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

heavy duty. Cutting capacity round/square 400 mm min. length 300 mm Max length a single / double feed 600/1200 mm

Formcook combi grill Belt width: 1100 mm Grill length: 11.000 mm Heating: thermic oil Cooking time: 3-50 min. Maximum temperature of 250 degrees Celsius Power: 25 kW Dimension: 12.825 x 1740 x 2323 mm Weight: 10.000 kg

Metal bandage gemaess picture

Band saw, with double feed

Pillow-pack machine Max 80 packages per minute thermally sealed

Formaco meat former press Model: FLL800/160/1 Serial: 1100 2002, Stainless, Meat former press

42 x SFS smart prop plus 20-350 new â 36,20EUR/St â?¬1520,40 = NET 1 x Doka stacking rack new 130,00EUR Unlimited quantities / construction support also available separately Prices exclusive VAT and transport -Tragkraft min. 20 kN at any extended length (according to German approval Z 8,311 946) Maintaining the value of the supports for many years thanks to high-quality manufacturing and galvanizing -schnelles and safe release of the clamped support through optimized thread pitch European Community product, produced according to DIN 1065 tap-proof works thanks to crushing and resiliency issues like at 0049 176 70044689 Mr. Becker

Used rolls press / dough divider FORTUNA, type: A3-áberholt-- for 30 dough pieces - 3 active plate - completely reconditioned and newly painted with (original) weight range: 32-70 g Dough weight: maximum 960-2,100 g Price: EUR 3.900,- Transport: EUR 150- Inspection and test run are possible by arrangement like.

diameter 200mm, little used, dusted, good condition.4 Bolts with bolt spacing approx. 94mm, Hole circle diameter of the bolts approx. 133mm, the largest diameter of the short cone approx. 106mm, Drawbar in the middle. All information to the best of our knowledge but without any information. Special price

Ford cardboard stitching machine; good condition; Long sleeve; suitable for flat wire; 380 volts; Exit via foot switch.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

continuous grilling line all stainless steel bottom contact grilling + hot air steam injection belt width 1.000 mm nett length 4.750 mm electrically heated 276 kW underplate max. 260°C air temperature max. 280°C belt washing system adjustable speed dimensions (l x w x h) : ± 6.600 x 1.500 x 2.300 mm

We offer: Doka / Form-on smartPROPplus 20 550 new a 62.60€ / piece net Doka stacking rack 1.55 x 0.85m new 130.00€ ( 30 pcs in frame) Heavy load supports , galvanized DIN 1065 , at each extension length 20kn load -Load capacity min. 20 kN at each extension length (according to general building inspection approval Z-8.311-946) -Preservation of the value of the supports over many years thanks to high-quality production and galvanizing -fast and safe release of the clamped support due to optimized thread pitch -safe working thanks to squeezing and fail-to-back protection - They offer on 1 construction support ! If you have any questions, call Mr. Becker on 0176-700 44689 the sale and sale of scaffolding/formwork systems and construction machinery; Formwork restoration on fair terms. Company SFS Meisterbetrieb Andreas Becker e. Kfm., Tel. [07305-9562350],  ...

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Rose Forgrove (APV) Type: RF 555 Flowpak YOM: 1988 output: up to 200 pieces/min. electrical: 380 V; 3 ph; 50 Hz dimensions: 4000 x 1250 x 1700 (lxwxh) Format range: length 50 - 275mm width max. 175 mm high max. 50mm discharge length: 315 mm Roll width: 450 mm Max. Rollen - ?: 330 mm (Außen), 76 mm (Innen) different: Infeed ca. 2000mm We offer this machine in as-is where-is condition excluded Vat, ex Warehouse Hess. Lichtenau, unpacked

Technical data: -Drilling capacity in steel ST 60 28 mm -Drilling capacity in steel ST 60 32 mm -Spindle mount MT 3 -Right - left rotation -Drilling spindle stroke 150 mm -Spindle speed continuously variable 80-1170 U/min -2 feed 0,1 / 0,2 mm / Rev -Throat depth 290 mm -max distance table - spindle 780 mm -Table with 2 T-slots 480 x 400 mm -Height-adjustable via rack and pinion with hand crank -Drive: 400 V / 0.9 / 1,3 kW -Space requirement approx. B 600 x H 2100 X 900 mm -Weight approx. 420 kg -with:-coolant system -Keyless drill Chuck 1-13 - lighting

The FORNI INDUSTRIALI FIBEX COMBI 6GX-10.130-7110.2E.270 brazing furnace was built by the Italian company Forni Industriali Heat Treating Plants in 2007. The furnace is used for soldering steel elements with solder paste at temperatures up to 1120 degrees Celsius. At the entrance and exit of the furnace, two pairs of gas burners (so-called safety pilots) are installed to prevent the escape of the protective atmosphere outside the furnace. Electric heaters powered by thyristor temperature regulators are responsible for the proper temperature in the furnace. The belt furnace has a conveyor speed adjustment in the range from 0 to 500 mm / min, and the working length of the soldering zone is 7100 mm. The furnace for brazing steel elements was modernized in 2021 - the thermal insulation and the cooling module for sections 1 and 2 were replaced. The cost of the modernization was 70,000 Euro.  ...

Forte cold circular sawing machine with roll feed. Outfeed table and bundle magazine doesn't exist.

Description Brand LOGIUDICE FORNI Model Vortex - LFRNPE 6080 ID R185 Year of manufacture 2009 Location Oradea (RO) Electric rack oven Logiudice Forni Vortex - LFRNPE 6080 manufactured in 2009. Number of trays: 18, tray size: 60 x 90 cm, tray spacing: 94 mm, total baking surface: 9,7 m2, external size: (L x W x H): 204+30 x 135 x 230+38 cm, weight: 1620 kg, thermic capacity: 60 000 Kcal, 240 000 Btu/h, 70 Kw. Electric absoption: 52 Kw (resistor) + 2,5 Kw (motor). ExWorks. Price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. (+40-740/221.698 ) Hablamos Español. Beszélünk magyarul. (+40-743/177.040 ) Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prio ...

P119 - used approx. 28.8 m³ / 28,800 litres GF-UP tank / plastic tank, double-walled, flat bottom tank, in good condition. technical details: capacity: approx. 28.8 m³ / 28,800 litres material: double-walled GF-UP tank manufacturer: Formoplast dimensions: Ø approx. 3.0 m x total height approx. 4.5 m certification mark: PA-VI 312.002 (DIBT examination report not available) specific weight: 1.4 kg / L Used storage tank in good condition. The hull will be newly painted in dark green. Double-walled flat bottom tank, aboveground storage tank with various connections such as ventilation, feed, etc., lid on the roof. According to the age, traces of use are present. For media with a specific weight of up to 1.4 kg/L, the tank formerly contained iron(II) chloride. This container can be used as a storage tank for liquid feed, water, whey and many different media. Pric ...

Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Technical data Cut range: round up to: 250 mm Square: 250 mm Execution: Horizontal hydraulic Automatic Cut length: min.: 3 mm max: 2 X 400 mm Cutting speed: stepless from: 14 m/min up to: 116 m/min Roll diameter: 460 mm Band length: 4100 mm Voltage 50 Hz 3x: 380 Volt Power: 4.00 kW Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1700 mm Width: 1500 mm Height: 1350 mm Various accessories: Coolant system

continuous grilling line all stainless steel adjustable product height with lower and upper belt : bottom and top grilling independent temperature control below and above net length 1.800 mm belt width 600 mm electrically heated ± 90 kW belt washing system above and below adjustable temperature range per heating plate (6 pieces) capacity up to 250 kg/h depending on the product adjustable speed dimensions (l x b x h): ± 3.000 x 1.650 x 2.400 mm