126,696 used machines on RESALE, but how to find them? Machine Search
for production of forgings by forging of ferrous, non-ferrous metals and alloys in the hammer dies model M212 Impact energy, 50 kJ Nominal weight of falling parts, kg 2000 Stroke woman, mm 1200 Stroke woman, mm 1200 Machine dimensions Length Width Height (mm) 3650X1660X5310 Weight kg 58.310, spare parts available
weight max. in kg: 4000 kg stroke: 3200 mm fork length: . mm power fuel: Diesel weight of the machine ca.: 6,43 t dimensions of the machine ca.: 4,8x1,5x2,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Start drives and performs all functions, the battery is in moderate condition. Auction-ID: A3-43515-5123
mechanical force transducer, force measuring bracket FORCE GAUGES HALLE 0 - 10 kN 1 t in wooden box Dimensions: 250 x 150 x 85 mm
mechanical force transducer, force measuring bracket FORCE MEASURING INSTRUMENTS HALLE 0 - 2000 N 200 kg in wooden box Dimensions: 250 x 150 x 85 mm
Pick up in 2580 putte Auction-ID: A3-43515-10659
Front and rear work lights, flash light, suspension seat, Perkins engine Auction-ID: A3-43515-238
Shaft forks 1 pair PAGUS 1300 x 800 x 100 mm Fork width: 120 mm Fork height: 40 mm Shafts Ø: 50 mm used,, tested ! Dimensions: 1300 x 800 x 300 mm
Led work lights front and rear, blue spot, flash light, width lights Auction-ID: A3-43515-243
Still EFG 1.5/5004/30 - Fully working/ Bad battery Auction-ID: A3-43515-17030
Punching PAGUS punching punching force approx. 4000 kg installation height approx. 200 mm projection: approx. 380 mm table 300 x 300 mm 380 V used, tested ! Dimensions: 1000 x 920 x 1550 mm
Biscuit forming machine Biscuit machine Janssen FM126M8 - Pastry forming machine - Manufacturer: Janssen - Model: FM 126 M8 - 380 volts
Auction-ID: A1-42014-138
2-roll flow-forming line NAM600S General condition: practically new / already out of service Scraper device (around the tailstock) Working stroke max. 500 mm Scraper force, infinitely variable from 50 - 200 kN Hydrau I i k / lubrication / cooling system Drive power Hydraulics approx. 75 kW Olin content Hydraulic tank approx. 1,500 I Equipment/Com ponents Hyd raulics Make Parker Hannifin Drive power oil lubrication approx. 4.4 kW Olin content Lubricant tank approx. 600 I Equipment/Com ponents Lubricant system Make Parker Hannifin Connected load Cooling system approx. 2.2kW lnhalt Coolant tank approx. 650 I Powerful coolant supply, adjustable 0 - 200 l/min. Cooling water requirement hydraulics + lubrication approx. 2.500 /h Cooling water flow temperature max. 25´C min. Cooling water differential pressure 2bar Cooling water system jerk max. 5 bar Compressed air system pr ...
New cascade FEM 3 Side shift Auction-ID: A3-43515-245
LED work lights, flash light, mastrek Auction-ID: A3-43515-246
Led work lights front and rear, blue spot, flash light, Auction-ID: A3-43515-244
INC battery charger, fork adjuster. Auction-ID: A1-40135-351
Front and rear work lights, flash light, suspension seat, Perkins engine Auction-ID: A3-43515-240
-Side shift -No documents -New Auction-ID: A3-43515-30091
Complete Mechanical Upgrade by GFM, with increase of Power to 900 Ton/hammer and new CNC in 1991 Numbers ̈of Hammers: 4 Forging force: 3.600 Ton (900t per hammer) Strokes per minute: 270 Maximum diameter of forging: - circular cross section: Ø 400 mm - square cross section: 320 mm Minimum output diameter: - circular: 60 mm - square: approx 50 mm Maximum length of forging with/without lateral reception: 8.000 mm / 9.700 mm Feed of manipulator A: 7.140 mm Feed of manipulator B: 9.940 mm Workpìece weight: 2500 kg Total power supply (nominal power): ca 1.600 kW Machine weight: 493.000 kg
mast will be dismantled for transport for fee Auction-ID: A7-45452-180
not working - without baterry Auction-ID: A7-45452-175
not working - battery discharged Auction-ID: A7-45452-185
not working - without baterry, no forks Auction-ID: A7-45452-174
We offer Peri Trio Elements 270 x 240 with 50% discount newly covered with original Peri Finply formlining 32 x Peri Trio Element TR 270 x 240 á 3409,00€ - 55% Discount = 1704,50€ / Piece Net price You bid on 1 element Peri Trio 270 x 240 sold separately. Subject to sale Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055
4 cylinder, engine runs but not with starter motor Auction-ID: A3-43520-17015
A horizontal flow-wrapping machine used in the food industry is available. Packaging weight min/max: 80g/1000kg. On-site inspection is possible.
Bolzoni auramo side shift/fork positioner Auction-ID: A3-43519-194
maximum number of results exceeded
please refine your search
10 € 
