for used for sale

Multivac Multivac B 400 Multivac B 400 packaging machine

Supervac GK 663 B packaging machine Supervac GK 663B from 2014 2014

Format set for hardfoil trays 195 x 250 mm Foil width 422 mm For skinpack

New Generation Polymer Formwork Panels, 18mm New generation formwork panels for maximum efficiency. The polymer panels can be nailed or cut like conventional formwork panels. No deformation, rot or rust possible. The panels are more durable than any other wooden formwork panel, even under the toughest working conditions. - Formwork plate made of polymer plastic - Weight of the plate 32kg - Dimensions 1.25 x 2.50m - Recyclable - € 20,55 per m2 New Generation Polymer Plywood, 18mm New generation formwork panels for maximum efficiency. The polymer panels can be nailed or cut like traditional formwork panels. No deformation, rot or rust possible. The panels are more durable than any other wooden formwork panel, even under the toughest working conditions. - Polymer Plywood - Sheet weight 32kg - Dimension 1,25 x 2,50m - Recyclable - € 20,55 per sqm

Automatic punching machine double stand Pressure 125 ton Stroke 10 - 80 mm Stroke rate 50-300 1/min Stand width 1180 mm Table area 1150 x 850 mm Continuous opening in the table 1000 x 220 mm Plunger area 1210 x 550 mm Plunger adjustment 100 mm Material width feed 350 mm Material thickness - 6 mm Punching system incl. Feed Model RS 350 SL Levelers Kohler Reel

D&b Cleaning System forming, filling and filling line Excellent condition, used very little.

B&D Clean system forming filling and filling line Excellent condition, used very little.

Description: Lot Fork Tines (4 pcs.) Approx. Onsite Dimension. (l x w x h): 1,800 x 800 x 300 mm, weight approx.: 150 kg

Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K Year of construction 1994 Operating hours 42,.650 hours, stand September 2022 Press power main press 100 tons Press power of pre-press 50 tons Feed channel 1,600 x 1,100 mm Filling volume 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm, lenght variable Drive power 2 x 30 kW Tying system 5-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 16 tons/hour bulk weight of 50 kg/cbm approx. 25 tons/hour bulk weight of 100 kg/cbm approx. 47 tons/hour Bale weight with a bale length of approx. 1.2 m approx. up to 1400 kg, depends on material Filling volume hydraulic oil tank 1,200 l SPS controller (manuf., type) Telemecanique TSX 47 Effektive transport dimensions only baler 11,850 x 2,600 x 3,470 mm (l x w x h) Transport weight baler 38.5 tons Condition of the baler: The machine was  ...

Muhr & Bender KBL 65-30 Optima B profile punching machine Type KBL 65-30 Year of construction 1975 Central lubrication Electrical triggering of the movement via foot pedal 5 tool stations Stop for long material Punch Punch 30mm in 17mm 24mm in 21mm Quick-change device for stamps Profile scissors 1. Z-profile 90° 140mm 2. Angle iron 90° 130x12mm 3. Square aisles 50mm 4. Round iron 55mm 6. T-iron 180mm 7. U-iron 90° 180mm 8. T-iron 90° 100mm Bar steel shears for material 45kp mm² strength 1. Flat iron up to max 60x28mm or 120x18mm 2. Angle iron 80x10mm 3. Square aisles 40mm 4. Round iron 45mm 6. T-iron 80x10mm 7. U-iron 100mm 8. T-iron 100mm Plate shears 1. with knife 13° = 13mm 2. with knife 2.5°= 140x9mm / 220x8mm 3. with knife 5° = 140x13mm / 220x12mm 3 phase current.- Frequency 50 Hz / 4 ...

- Installed 03-2008 - RIP program Trueflow 3 with 1 bit tif - Exposure hours from the laser 3.052 ( Total 51285 plates ) - Semi-automatic plate feed with the help of the plate loading table - Large and multi-format output – from 4 pages to 32 pages - 2 x inline Punch Bacher 2000 ( double exposure two Plates simultaneous and punching ) - 14 plates/hour 2,032 x 1,270 mm - 17 plates/hour 1,524 x 1,143 mm - 30 plates/hour: 1,030 x 800 mm (exposure of two Plates simultaneous ) - Innovative 512-channel GLV exposure head enables high-speed exposure of large-format plates or two side-by-side mounted panels Plates up to the size of 1,160 x1,270 mm. - Resolution: 1200 / 2400 / 2438 / 2540 dpi - - with GLUNZ & JENSEN Quartz III 150 plate developer - with forklift

We offer a position Doka Framax Alu 186,759m² in good ready-to-use condition with up to 75% discount! Partially new formwork - new value = 176.805,40€ Special net price 53.512,74€ Formwork completely cleaned, inspected and sorted. Formlining exposed concrete class 2/3 or newly covered with Finply formwork. Out-of-the-box, suitable for higher-value use. Pcs. Designation 28 Alu-Framax Xlife-Element HK 0.90x 2.70m 3 Alu-Framax Xlife-Element HK 0.90x 2.70m – newly occupied 3 aluminium Framax Xlife element HK 0.75x 2.70m 1 aluminium Framax Xlife element HK 0.75x 2.70m – newly occupied 15 Alu-Framax Xlife-Element HK 0.60x 2.70m 5 Alu-Framax Xlife-Element HK 0.60x 2.70m – newly occupied 10 aluminium Framax Xlife element 0.45x 0.90m 3 Alu-Framax Xlife element 0.45x 0.90m – newly occupied 3 aluminium Framax Xlife element 0.30x 2.70m 7 Alu-Framax Xlife el ...

Product number: 2498 Type: MLF600 Serial number: 723 Year of construction: 2000 Belt width: 600 mm Capacity: max 75 strokes/min. Hopper: 380 litres Compressed air: 6-8 Bar, 300 nl/min. Power: 3 x 400V, 50Hz, 23kW Dimensions: 2600 x 1200 x 2100 mm Weight: 1782 kg

Used Koppens forming, buttering and predusting line is a great solution for every production plant who is specialized in making meat burgers. The line consists of Koppens VM 600HD EasyFormer, Koppens ERT 600 wetcoater with mixer and Koppens Optiflour preduster. The complete line allows to form meat burgers and cover it with coating both wet and dry (flour/flour with spices) Belt width: 600mm Efficiency: up to 50 strokes/min

Handtmann Sausage linking machine (2007) Good condition

Thermal VLF CTP Avalon N16-50 XT 510,000 plates produced Year : 2013 with MAL 16000, year 2009 with Processor Quartz III 125 with Stacker NO RIP

Van Oirschot mobile lifter, fork length: 800 mm, capacity: 900 kg, total dimensions: 1300 mm x 1050 mm x 1750 mm.

Description

no. of strokes:150 /min impact energy:420 kJ distance lower die block / ram gudeway:435 mm Throat:425 mm steel forging - rectangular up to:110 mm steel forging - diameter up to:125 mm power requirement:22,0 kW weight of hammer:3,9 t weight of anvil:3,0 t ram hammer weight:200 kg weight:6,9 t dimensions (WxDxH):1,1 x 2,3 x 2,4 m

Crane arm for forklift STABAU Type KR 15 Fabr. No. 003-14276 Year of construction 1986 Nominal load 1500 kg load capacity at 450 mm radius 1500 kg load capacity at 750 mm radius 1100 kg load capacity at 1200 mm radius 750 kg Suitable for fork carrier FEM 2 = 403 mm Load hook adjustable in 6 steps Total height of the crane arm 1350 mm Boom profile 110 x 110 mm on mobile transport frame good condition; used

Tilting container, tipping container for forklifts Chip bucket - Hopper - Folding container Load capacity: approx. 1000 kg Volume: 1 m³ Entry bracket: 230 x 110 mm Tine distance inside/outside: 160/600 mm- manual tilting device via hand lever - 4 pieces plastic fixed castors 175 and, 2 pieces steerable- foldable trailer drawbar - drive-in bracket/forklift holder Net weight: 220 kg Length: 1700 mm Width: 1060 mm Height: 1500 mm good condition Suitable for collecting, storing and transferring recyclable materials; used

Electrohydraulic scissor fork stacker Lift truck, pallet truck for pallets TOYOTA / BT type HTH 10 E Fabr. No. 481795 Year of construction 2005 Load capacity 1000 kg Lifting height max. 800 mm Height drained 85 mm Fork length 1190 mm - Electric lift over 12 volts Battery operation - manual stroke via hand lever as in the pallet truck - TOYOTA Industrial Equipment Europe SARL (Made in France) - Long-stroke hydraulic cylinder - with single roller - integrated charger (mains voltage 230 Volt, with IEC plug) Net weight 140 kg good condition; used

Electronic crane scale MWT Type 142 Fabr. No.: 142571 Year of construction 1993 Traction measuring device, crane scale Measuring range: 2,500 to 80,000 kg Smallest measured value: 20 kg Power supply via 12 volts Battery suspension shackle for double hooks, anchor hook operation, storage of measured values and tare via remote control - Memory for measured values (weights) - Printer for measured values very solid and high-quality body made of steel Net weight: approx. 200 kg ; used

Electric forklift JUNGHEINRICH type EFG 216 Serial No. FN413671 Year of construction 2011 Load capacity 1600 kg Lifting height 4800 mm Fork length 1220 mm Fork carrier width 980 mm Construction height 2120 mm Operating voltage 48 Volt- Triplex mast with full free stroke 1550 mm - hydraulic side shifter - 2 travel speeds - Battery from year of construction 2015, type 06 EPZS C750 SC (48 Volt, 750 Ah) - Automatic charger, 48 Volt - 3-wheel solid rubber - Tyres front 18 x 7-8, rear 140/55-9 - according to operating hours counter 14725 operating hours read - Auxiliary steering - Work lights front - New TÜV - UVV inspection Length without forks 2000 mm Total width 1080 mm Net weight without battery 2390 kg Net weight with battery 3480 kg ; used

Equipped with scoring unit (2000mm), Holzmann ABS 2480 dust collector with insert.

Electrically high and low and slanted.

Saw blade adjustable 90° - 45°

Vertical table size 5000x2100 mm; machine constructed on H-E-B profile steel frame; including Huvema double moth extraction; equipped with 2x padded air pocket; 2x plastic collection bag; mounted in wall-mounted steel cabin (front and right side steel wall); the purchaser must dismantle the sawing device in a professional manner; Afterwards, the machine will be tilted by the buyer through the roller door (height 2480 mm) to be brought outside; the buyer must also dismantle the wall-mounted steel cabin;

Type 5 Nominal weight of falling parts 1750 kg Impact energy, not less than 4878kgm Number of strokes per minute 85 Max. ram stroke 890mm Diameter of ram 455mm Ram pallet face 405x305mm Anvil pallet face from floor 535mm Height above floor 4040mm Baseplate 4405x2085mm Motor rating 110 kW Weight 40000kg Weight without anvil block 25000kg

Air forging hammer Stanko MB 4134 Year of manufacture: 1988 Nominal weight of falling parts, kg: 250 Energy of impact, Kj: 5,6 The greatest number of impacts in a minute: 150 Ram axis-to-frame distance, mm: 420 Working zone daylight, mm: 450 Die impression size, mm: 510 x 80 Main electric motor power kW: 22 Weight of a hammer with an anvil-block, kg: 7850 Price 6500 EUR

Wrap max length : 110 mm Wrap max width : 55 mm Machine is like new There are some tools(700 gram and 2000 gram cheese)

Producer: HUTA ZYGMUNT, Model: MPM 6300B, Origin: Poland, New in: 1978, Force: 2500 kGm, Stroke of ram: 850 mm, Space between shears: 650 mm, Length of die seat in ram: 650 mm, Length of die seat in cushion: 900 mm, Max. weight of top die: 800 kg, Min. die height: 300 mm, Strokes/min: 100,

Wire diameter: 16mm, number of stations: 5, length: 6700mm, width: 3800mm, height: 3050mm, including sound-proof cabin, straightener, chain hoist, sorting trough, dosing machine, oil mist separator and additional accessories.

Max. hydraulic pressure: 400bar.

Pressing force: 130t, max. wire diameter: 17mm, cutting length: 150mm, ejector stroke matrix: 125mm, ejector stroke stamp: 58mm. WZ dimensions length/diameter: blade: 80mm/50mm, die: 180mm/90mm, punch: 195mm/75mm. Weight without housing: 27t. Available from 26.08.2024.

Voltage: 220/ 380V, nominal current: 8/ 5A.

Bear weight: 1t, max. impact energy: 27kJ, stroke rate: 95/min, max. stroke: 950mm, working height: 800mm, drop face dimensions: 365x180mm, connected load: 75kW, length: 4125mm, width: 1500mm, height: 3662mm, weight: 20t, with documentation, on-site inspection is possible.

Bear weight: 500kg, lifting speed: 120/min, connected load: 45kW, with documentation, the scraper is defective, the dovetail is broken, an on-site inspection is possible.

Bear weight: 400kg, lifting speed: 125/min, connected load: 30kW, with documentation, an on-site inspection is possible.

Bear weight: 300kg, lifting speed: 130/min, with documentation, an on-site inspection is possible.

Packaging system for dosing and filling granules into pre-made pouches and vacuuming of the pouch. Work steps: Removal of the bag, dosing of the granulate by means of a scale, forming the bag into a brick shape before filling, vacuuming and sealing of the bag. Suitable for granular materials such as coffee beans, cereals, rice, animal feed, seeds, beans, peanuts, salt, chemical fertilizer, etc. PLC controlled, operation via touch screen. Suitable for poly bags. - Specifications: filling range: 500-5000g | accuracy: = 5g | max. speed of the machine in neutral: 9 cycles/minute | power: 380V, total 5kW | compressed air: 0,85m?/min, 6-8bar | dimensions of the machine: L2260xW2925xH2500mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stoc ...

Vertical form and filling system for liquids into Doypack-Style bags (stand-up pouch) with integrated system to add caps. Including liquid dosing device (for high viscosity liquids). - Pneumatic transmission system, computer controlled, easy operation and adjustments. Suitabel for a wide range of films: PE/PA/PET, PE/PA, PE/PET, PE/BOPP, PE/AL/PET, etc. - Specifications: packaging volume: 100-550ml | bag size: L(120-180)xW100-150)mm | max. speed of the machine in neutral: 25 cycles/minute | accuracy: +/- 1.5% | 220V, 1.0kW | 0.4m?, 6bar | machine dimensions: L3700xW1000xH2550mm | weight: 400kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are a ...

Vertical form and filling system for liquids into Doypack-Style bags (stand-up pouch). Including liquid dosing device (for high viscosity liquids). Pneumatic transmission system, computer controlled, easy operation and adjustments. Suitabel for a wide range of films: PE/PA/PET, PE/PA, PE/PET, PE/BOPP, PE/AL/PET, etc. - Specifications: packaging volume: 100-550ml | bag size: L(120-180)xW100-150)mm | max. speed of the machine in neutral: 25 cycles/minute | accuracy: +/- 1.5% | 220V, 1.7kW | 0.4m?, 6bar | machine dimensions: L1450xW930xH2370mm | weight: 330kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In ad ...

Vertical filling machine, servo driven, for liquids OR pastes into pillow-bags. Including liquid dosing device (for high OR low viscosity liquids/pastes). - Specifications: max. speed of the machine in neutral: : up to 70 cycles/minute | suitable for volumes from 0-1000ml | filling temperature: up to 80?C | accuracy: +/- 1.0% (depending on product) | max. film width: 430mm | bag size: max. 340x210mm | 1.5m?, 6bar | 220V, 4.8kW. OMRON encoder to control bag length, PANASONIC/Autonics print mark sensor, 7 touchscreen, OMRON PLC, AIRTAC pneumatic pars, OMRON PID temperature control, electronic parts from SCHNEIDER / OMRON. Stainless steel version (SS304), including hot printer (2 lines, 10 characters). Dosing equipment: Pump with filling range of 100-1000ml, 40 liter hopper tank with double wall with warm water circulation. Machine dimensions and weight: L1080xW1300xH1400mm, 550kg Please no ...

Vertical filling machine for liquids OR pastes into pillow-bags. Including liquid dosing device (for high OR low viscosity liquids/pastes). - Specifications: max. speed of the machine in neutral: 50 cycles/minute | suitable for volumes from 0-1000ml | filling temperature: up to 80?C | accuracy: +/- 1.0% (depending on product) | max. film width: 430mm | bag size: max. 340x210mm | 1.5m?, 6bar | 220V, 4.8kW. SCHNEIDER film pulling motor, PANASONIC/Autonics print mark sensor, 7 touchscreen, OMRON PLC, FESTO pneumatic parts (horizontal seal), other parts from AIRTAC, OMRON 4 way temperature control, electronic parts from SCHNEIDER / OMRON. Stainless steel version (SS304), including hot printer (2 lines, 10 characters). Dosing equipment: Pump with filling range of 100-1000ml, 40 liter hopper tank with double wall with warm water circulation. Machine dimensions and weight: L1080xW1300xH1400mm,  ...

Vertical filling machine for liquids into 3-side-seal- or pillow-bags. Including liquid dosing device (for high viscosity liquids). Twin filling layout for high capacity. Can be linked to CIP system to have an automatic circulating system to guarantee clean feeding pipes. The packaging material is sterilized by UV lights inside the machine to assure a clean environment for the packaging material and the liquid product. Contamination of the liquid product can be reduced during the packaging process to have a longer shelf life. - Specifications: max. speed of the machine in neutral: 100 cycles/minute | suitable for volumes from 200-1000ml | accuracy: +/- 1.5% | max. film width: 320mm | bag width: 100-160mm (depending on pouch type) | bag length: 95-165mm | 0.7m?, 6bar | 380V, 3.9kW | machine dimensions: 1700x1100x2950mm | weight: 720kg. That machine/system is available in different version ...

Vertical filling machine for low-viscosity liquids into pillow-bags. Including liquid dosing device. Suitable for laminated compund films like BOPP/PE and others. - Specifications: max. speed of the machine in neutral: 60 cycles/minute | suitable for volumes from 100-1000ml | stepless bag length regulation | accuracy: depending on water level product | max. film width: 50-200mm | bag size: max. L50-250xW50-200mm | without air pressure | 220V, 1.95kW | stainless steel version (SS201 in housing, contact material part SS304) | machine dimensions: L1120xW920xH2050mm | weight: 500kg Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations fr ...