for measuring used for sale

Balkenzwinge 20 – galvanized Used - ready for immediate use! Galvanized beam clamps for support in beams and edge and ceiling formwork Length: 30 cm Height: 35 cm 6.9 kg Price: € 32,00 356 pieces in stock forming support 20 – galvanized Used - ready for immediate use! Galvanized beam clamps for supporting beams and edge and slab stop ends Length: 30cm Heigth: 35cm 6.9 kg Price € 32,00 356 pieces on stock

Forklift battery charger, industrial charger, forklift battery charger, industrial charger -Voltage: 24 volts -Power: 25 A -Connection: 230 volts -Weight: 30 kg

Forklift battery charger, industrial charger, forklift battery charger -24 volts -Power: 63 A -Connection: 220 volts

New Generation Polymer Formwork Panels, 18mm New generation formwork panels for maximum efficiency. The polymer panels can be nailed or cut like conventional formwork panels. No deformation, rot or rust possible. The panels are more durable than any other wooden formwork panel, even under the toughest working conditions. - Formwork plate made of polymer plastic - Weight of the plate 32kg - Dimensions 1.25 x 2.50m - Recyclable - € 20,55 per m2 New Generation Polymer Plywood, 18mm New generation formwork panels for maximum efficiency. The polymer panels can be nailed or cut like traditional formwork panels. No deformation, rot or rust possible. The panels are more durable than any other wooden formwork panel, even under the toughest working conditions. - Polymer Plywood - Sheet weight 32kg - Dimension 1,25 x 2,50m - Recyclable - € 20,55 per sqm

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, silicon rectifier -Manufacturer: Still, charger Belatron type E 24/90 eco EU -Input voltage: 220 V 50 Hz -Power: 25.2 V/90 A -Dimensions: 550/410/H780 mm -Weight: 94 kg

Formwork nail, formwork nails, concrete nails, head bolts -Manufacturer: Würth, shuttering nail in magazines box with 100 pcs. -Type: SMA 106/10 54mm long -Number: 61x box available -Price: per box -Dimensions cardboard: 120/100/H55 mm -Weight: 0.5 kg/box

Injection molding machine, clamping force control unit, control unit -Manufacturer: Demag Kunststofftechnik, clamping force control unit -Type: DMS-SKR 79/5 ID no. 064 929 65 RMS -Dimensions: 165/95/H95 mm -Weight: 0.7 kg

Electrode tongs, electrode device, electrode welding device -Electrode clamp: cable without plug -Length: 5m -Weight: 4.5 kg

Servo drive, servo card, output module, CPU card, input processor, power supply, control, converter, controller, servo line former, drive control device -Indramat: AC Servo Line Former from DMT CD320 cycle lathe -Type: NAM 1.2-15 -Item: 246506 K39/96 -Dimension: 325/105/H390 mm -Weight: 21 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Manufacturer: Jungheinrich, Timetronic ECO JH charger -Type: D400 G 24/70 B-ETIS -Input voltage: 400V 50-60Hz -Power: 24V/70A -Dimensions: 500/500/H730 mm -Weight: 55 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Charger: for forklifts, type GFWEA/W 24/70 -Input voltage: 220V 50Hz -Power: 25.2V/70A -Dimensions: 555/360/H690 mm -Weight: 55 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Manufacturer: Oldham, charger type High Power III 36-80 -Input voltage: 220/380V 50Hz -Power: 36 V / 80 A -Dimensions: 555/410/H790 mm -Weight: 66 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1120mm -Cross section: 140 x 60 mm -Recording: see photos -Dimensions each: 1220/140/H620 mm -Total weight: 210 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 935mm -Cross section: 140 x 50 mm -Recording: see photos -Dimensions each: 1040/140/H660 mm -Total weight: 156 kg

crane fork, loading fork, load fork, pallet fork, pallet crane fork -Crane fork: with manual balancing -Load capacity: kg -Tine length: 730 mm -manual weight compensation -Fork: adjustable up to 1040 mm -Useful height: adjustable 1170 to 1960 mm -Dimensions: 1060/865/H1130 mm -Own weight: 108 kg

Nominal mass of falling parts, taking into account the mass of the upper stamp (500 kg.), Kg. 5000 Actual mass of falling parts without top stamp, kg. 5030 Effective kinetic energy of falling parts at full successive impacts, kgc m 12500 The greatest working stroke of a woman, mm. 1300 The smallest height of dies without shanks, mm. 400 Distance between guides in the light, mm. 800 The length of the woman in the direction perpendicular to the front of the hammer, mm. 1180 Steam (air) pressure before entering the cylinder, atm. 7-9 Nominal mass of the upper die, kg 500 The largest mass of the upper die, kg. 1500 The highest permissible steam temperature, ⁰C 200 weight 145-148ton, weight of anvil block 75+22 ton.

Producer: HUTA ZYGMUNT, Model: MPM 6300B, Origin: Poland, New in: 1978, Force: 2500 kGm, Stroke of ram: 850 mm, Space between shears: 650 mm, Length of die seat in ram: 650 mm, Length of die seat in cushion: 900 mm, Max. weight of top die: 800 kg, Min. die height: 300 mm, Strokes/min: 100,

Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Manufacturer: DETA, charger type WE 24/64 S -Input voltage: 220 V 50 Hz -Power: 24 V/64 A -Dimensions: 455/380/H810 mm -Weight: 51 kg

Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Manufacturer: Still, charger type E 24/50 SL -Input voltage: 220 V 50 Hz -Power: 24 V/50 A -Dimensions: 555/430/H750 mm -Weight: 50 kg

Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Charger for forklifts: Miditron Type D 400G 48/100 PWF-PMT -Input voltage: 400 V 50 Hz -Power: 48 V/100 A -Dimensions: 555/530/H690 mm -Weight: 112 kg

Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Manufacturer: Hagen Battery, Charger Belatron Type E220 G24/50 B-FB -Input voltage: 220 V 50 Hz -Power: 25.2 V/50 A -Dimensions: 540/330/H420 mm -Weight: 40 kg

Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Manufacturer: Jungheinrich, charger type DLW 12/20 SN -Input voltage: 220 V 50 Hz -Power: 12 V/20 A -Dimensions: 410/200/H340 mm -Weight: 12 kg

lifting mast, stacker mast, forklift mast, lifting frame, rear loader -Manufacturer: Clark, forklift mast from forklift type C500-Y80 -Load capacity: approx. 4000 kg -Lifting height: mm -Recording/Dimensions: see photos / technical drawing -Dimensions: 1245/420/H2350 mm -Weight: 1120 kg

fork head new, galvanized 6,80€ piece Forkhead new, galvanized 6,80€/ piece Support leg / tripod / tripod newly galvanized. 24,00€/ piece all prices excl. VAT and transport Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ warehouse address: Birkenstrasse 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Register court Ulm: HRA722943 VAT ID NO.: DE279047055

Fork carrier, forklift blade, pallet fork, forklift fork, for wheel loader, forklift, telehandler, stacker, tractor -Fork carriage: without forks -Load capacity: 1500 kg -Beam width: 2500 mm -Forks: available in a wide selection -Total dimensions: 2500/130/H400 mm -Weight: 370 kg

Capacity :10 tons, Weight of falling part,nominal mass of drop parts without upper instr.:9 tons, Effective working kinetic energy after blow :25000 kg mtr., Max. working ram stroke :1400 mm, Max no of blows : 30/min , Distance between slides : 1000 mm, Shut height : 775 mm , Ram size front to back :1200 mm, Bolster size front to back :1200 mm, Air pressure : 7-9 MPA , Height of instruments : 450 min., Die-holder front to back dimensions: 1400 mm, Height above floor level: 7270 mm, Hammer dimensions : 4400x10420x2700 mm, Weight (less anvil block): 73.5 ton, Weight of anvil block : 203.8 tons.

FORMING, GLUING AND BREADING LINE, KOPPENS + MULTIFORCE CONTRACT LIMITED Technical description: Forming machine Koppens, type: VM 400-HS Dimensions: 2100 x 800 x 2080 mm Gluing machine Koppens, type: ER 400 Dimensions: 1435 x 815 x 1620 mm Breading machine Koppens, type: PR 400 Dimensions: 2470 x 670 x 2050 mm Gluing machine Mutliforce Contract Limited Dimensions: 1100 x 600 x 1670 mm

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Charger: for forklifts, type D 24/200 MULTI WF200 -Input voltage: 400 V 50 Hz -Power: 24 V/200 A -Dimensions: 555/520/H890 mm -Weight: 119 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1400 mm -Cross-section: 125 x 45 mm -Recording: see photos -Transport dimensions: 1520/560/H125 mm -Total weight: 148 kg

COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine was manufactured in Italy in 1988. The thermoforming line, consisting of, among others, a heating station, a bulge photocell and a moulded parts conveyor, is designed for the fully automatic production of oversized parts using the thermoforming method. The COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine is equipped with a gauge measuring the thickness of the platen in order to avoid accidentally taking two platens from the package at the same time. The platens, by means of transport grippers actuated by pneumatic cylinders, reach the individual work stations, i.e. the preheating station, consisting of two opposing panels, the plasticising preheating station and the forming unit. In the forming unit, the thermoforming process takes place, during which a BOTTINI GIANNI press with an upper and lower moving table peripherall ...

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1800 mm -Cross-section: 200 x 60 mm -Recording: see photos -Transport dimensions: 2060/1080/H200 mm -Total weight: 487 kg

Lifting mast, stacker mast, forklift mast, lifting frame, rear forklift -Manufacturer: Baumann, forklift mast from sideloader type AS 60/18/15 -Load capacity: approx. 6000 kg -Lifting height: mm -Recording/Dimensions: see photos / technical drawing -Transport dimensions: 3200/1620/H750 mm -Weight: 2100 kg

Lifting mast, forklift mast, forklift mast, lifting frame, rear forklift, triplex mast -Manufacturer: Linde, Triplex mast for electric forklift type E20 -Load capacity: 2000 kg -Dimensions: see photos / technical drawing -Dimensions: 2530/1150/H415 mm -Weight: 1070 kg

Lifting mast, forklift mast, forklift mast, lifting frame, rear forklift, triplex mast -Manufacturer: Linde, Triplex mast for electric forklift type E20 -Load capacity: kg -Dimensions: see photos / technical drawing -Dimensions: 2230/1150/H375 mm -Weight: 920 kg

Nominal weight of the falling parts: 750 kg Max. number of blows per minute: 105 Kinetic energy: 1900 kg Distance from an axis of the slider up to bed: 750 mm Cylinder diameter: 600 mm Diameter of the plunger: 630 mm Max. headstock travel: 835 mm Dimensions: -Left-to-right: 3940 mm -Front-to-back: 1430 mm Height above floor level: 3260 mm Weight: -With an anvil-block: 25600 kg -Without an anvil-block: 16600 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1195 mm -Cross-section: 100 x 45 mm -Recording: see photos -Transport dimensions: 1370/610/H100 mm -Total weight: 112 kg

Weld edge former, weld edge former, weld preparation, weld edge forming machine, edge milling device, edge milling machine, mobile milling machine -Manufacturer: BDS, Weld edge former/edge milling machine with accessories -Type: SKF 20 -Power: 1.1 kW -Accessories: see photos -Box dimensions: 460/355/H355 mm -Total weight: 33.2 kg

Weld edge former, weld edge former, weld preparation, weld edge forming machine, edge milling device, edge milling machine, mobile milling machine -Manufacturer: BDS, Weld edge former/edge milling machine -Type: SKF 20 -Power: 1.1 kW -Accessories: see photos -Box dimensions: 460/355/H355 mm -Total weight: 29.4 kg

Crane fork, loading fork, load fork, pallet fork, pallet crane fork, lifting equipment, roller lifter -Crane fork: with adjustable weight compensation -Type: Hoist 630x475 -Load capacity: 250 kg -Tin length: 490 mm -Usable height: 610 mm -Dimensions: 635/520/H795 mm -Weight: 21 kg

Clamping bars, clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, fork clamping irons -Tensioning bracket: Fork clamping iron, beveled -Slot width: 25 mm -Dimensions: 320/65/H40 mm -Weight: 3.8 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger -24 volts -Power: 63 A -Connection: 220 volts -Weight: 110 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger -24 volts -Power: 64 A -Connection: 220 volts -Weight: 50 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger -24 volts -Power: 20 A -Connection: 230 volts -Number: 7 chargers available -Price: per piece -Weight: 18 kg/piece -functionally tested

We offer formwork girders from Doka & Peri H20 and H24 inspected and sorted - ready for immediate use. Doka Beam I tec 20: Doka Rental Storage Quality - €6.50 per linear metre The I tec 20 composite formwork beam is a solid wall girder with a special structure in accordance with DIBt approval and innovative polyurethane final reinforcement for lower material use and extended service life. Doka Carrier H20 top P: Doka Rental Storage Quality - €6.00 per linear metre The resistant formwork beam in solid wall construction High-quality, robust, durable – the Doka H20 top P beam is a durable solid wall beam with a web made of a special flat pressed panel, which can be used in wall and slab formwork systems. The innovative polyurethane final reinforcement reduces damage and guarantees up to three times longer service life. GT 24 lattice girder: 5,00€ per linear metre Wel ...