folding machine used for sale

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 12000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW weight of the machine ca.: 0,6 t Mechanic: very good: Optical condition: very good: The machine can be viewed under current.: operating key and instruction: 2016 S25 003004 400 V, 50/60 Hz, with CEE plug and cable Color: light gray motorized height adjustment, axial grinding spindle adjustment Equipment: Opto-electronic measuring device with measuring electronics Image processing, PC (Original ISOG) CCD camera and monitor Dividing head Sk 40 with dividing disk 24 R 1 dividing disk each 14, 16, 18 Tightening screw M 16 Counter bearing complete with 4 center punch points Center point Sk 40 with driver Twist-u. Relief grinding device with rac ...

Bottle washer, make Krones, type: Lavatec KES 245-26-080, for 39.000 bph, control range 15.000-46.000 bph, 26 bottles/row, with 80mm cell pitch, 110mm chain pitch, with SPS Siemens S7 control, width: 4.745 mm, length: 11.283 mm.

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 12000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW weight of the machine ca.: 0,6 t Mechanic: very good: Optical condition: very good: The machine can be viewed under current.: operating key and instruction: 2189 400 V, 50 Hz, with CEE plug and cable Colour: body pastel turquoise RAL 6034 Stand blue-grey RAL 7031 Motorized height adjustment, axial grinding spindle adjustment Machine as new Accesories: SK 40 dividing head with 24 R dividing disc Graduated disc 20 R Tightening screw M 16 69871 Spiral and relief grinding device with rack housing Counter bearing with 4 tailstock centres Center point with driver Dressing device Dressing diamond Radius grinding device SK 40 complete with se ...

connected load frequency: 230 V battery: 24V / 100Ah Brush diameter: 510 mm turning speeds: 175 U/min 0: Luft 24 L / s tank capacity: 50 / 50 Liter weight: 160 kg range L-W-H: 1,1 x 0,52 x 1,0 mm Daewoo floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank volume: 50/ 50 L The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2500 mm y-travel: 750 mm z-travel: 1000 mm table surface area: 2550 x 800 mm spindle taper: SK 50 control: HEIDENHAIN, TNC 150 B The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Equipment: Code reading system HHS Xtend² for color codes consisting of: • Control unit X-tend² with code reader • Encoder with bracket • Touch screen screen • Folding switch with reading head CT10 • Bobst turntable ejector • Cable set complete for Bobst folding carton gluers

CATALOG NUMBER 6679 TECHNICAL DATA - max width of the workpiece 250mm - max height of the workpiece 170mm 6 spindles: 1) horizontal lower 250mm 5.5kW 2) vertical right 170mm 5.5kW 3) vertical left 170mm 5.5kW 4) horizontal, upper 250mm 7.5kW 5) horizontal lower 250mm 7.5kW 6) universal 250mm, adjustable at an angle of 360 ° 5.5kW - 6 electrically adjustable spindle up / down - all adjustable spindles up / down, right / left - diameter of the spindles 40mm - 6 introductory pulling rollers, toothed, including 2 double ones - 6 rollers leading out, pulling, rubber, smooth, including 2 double - 2 clamps from above - from the bottom, a roller introducing toothed, pulling, torsion in the table before the first spindle - at the bottom, 2 pulling rollers, metal, smooth - 4 side clamps at the bottom - feed on cardan shafts - pneumatically pressed rollers - smooth regulati ...

Fully automatic, high-precision production cell for series production of piping systems (e.g. brake, fuel or hydraulic lines) including robot, feeder, double O-ring assembly and high-quality testing technology. The system combines the legendary precision of a MIIC CNC bending machine with the flexibility of robot-assisted handling and integrated quality assurance. The system is ideal for suppliers to the automotive industry, mechanical engineering or fluid technology. Technical data 1. CNC Mandrel Bending Machine Manufacturer: MIIC (Chubu MIIC Co., Ltd., Japan) Type: EMO-20R-S Year of Make: 2001 Control: CNC multi-axis fault with operator panel Special features: Collet head can be moved in X / Y / Z, equipped with 3 bending planes for highly complex spatial shapes without changing tools. 2. Loading and unloading robots Manufacturer: Motoman (Yaskawa) Type: ERCS- ...

Grinding machine Heesemann type MFA 8 Specifications: • Working width (mm): 1300 • CSD system • Transverse grinding unit • Longitudinal grinding unit - shoe • Brush unit • Ionization • Vacuum carpet

CATALOG NUMBER 6674 TECHNICAL DATA - max planing width 150mm - max planing height 130mm 7 spindles: 1) horizontal lower 150mm 3kW 2) vertical right 130mm 3kW 3) vertical left 130mm 4kW 4) horizontal upper 150mm 4kW 5) horizontal lower 150mm 3kW 6) vertical right 130mm 4kW - diameter of all spindles 35mm - all adjustable spindles up / down and right / left - from above, 4 pulling rollers, toothed - 4 rubber, pulling rollers from above - 2 clamps from above - electric adjustment of the planing thickness of 0.25kW - length of the introductory top 1970mm - central lubrication of the table top - smooth regulation of the feed speed - 1.5kW feed motor - diameters of the extraction ports 6x120mm - dimensions length / width / height 4000x1300x1600mm - weight about 3000 kg - German production - for 6 heads - used planer, very good condition Net price: PLN 36900  ...

Rated power at 50%ED: 15kVA Short-circuit current: 14.4kA Electrode force: 40-240daN / single stroke Projection: 300mm --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

bore diameter: 50 mm throat: 3000 mm workpiece height: max. 200 mm total power requirement: 75 kW weight of the machine ca.: 27 t dimensions of the machine ca.: m Brand: CMA Type: GRD50 CNZ 13030 Year of make: 2010 Capacity: 50 mm X: 3.000 mm Y: 13.000 mm Z: 400 mm Spindle taper: N: 3.000 Power : 75 kW Speed: 3.000 RPM Machine weight: 27.000 kg Tap capacity: M30 Drilling depth: 150-200 mm Bed: 13,000 x 3,000 mm Max. workpiece weight: 1,500 kg /m2 Tool changer: 12 pieces External spindle cooling Chip conveyor Can be seen working at a external location The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: 200 x 190 mm Reference: Lebendigig - Lot 31 Auction-ID: A7-49882-213

Table dimensions: 200 x 190 mm Reference: Lebendigig - Lot 30 Auction-ID: A7-49882-212

Table dimensions: 300 x 260 mm Reference: Lebendigig - Lot 32 Auction-ID: A7-49882-214

MAIN TECHNICAL DATA • Punching Force: 180 kN (18 Tons) • Working range (X x Y): 2500 mm × 1250 mm (without repositioning) • Maximum sheet thickness: 6.4 mm • Maximum weight of the piece (sheet metal): 150 kg • Maximum punching diameter: 76 mm (single punching) PERFORMANCE AND SPEED • X-axis positioning speed: 90 m/min • Y-axis positioning speed: 60 m/min • Simultaneous speed (X+Y): 108 m/min • C-axis rotation speed: 180 rpm • Number of punching strokes: up to 900 strokes/min (1 mm pitch) • Number of marking/gnawing shots: up to 2200 strokes/min TOOL SYSTEM AND CNC • Numerical Control: CNC based on Bosch Type 3 • Tool magazine: Linear with 19 stations with 2 self-centering clamps • Tool rotation: 360° full rotation for all stations (all tools are rotating) • Multitool compatibility: Configuration from 19 to 190 tools in total (when using ...

Radial drilling machine used for drilling and milling Manufacturer: COLLET & ENGELHARD GmbH Type: BUV 1600 Year of construction: 1976 horizontally and vertically swivelling head Drilling capacity: 50 mm Travel arm: approx. 800 mm max column travel: 1000 mm Speed: 14 to 710 rpm Spindle stroke approx. 300 mm 380 V Dimensions: approx. 2600 x 1300 x 3000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Horizontal turning machine manufactured in 2010. This ACRA FEL-1860ENC/B features a swing over bed of Ø460 mm and a distance between centers of 1,400 mm. It offers a maximum working diameter of Ø260 mm and a spindle speed range of 27–2,500 rpm. If you are looking to get high-quality turning capabilities, consider the ACRA FEL-1860ENC/B machine we have for sale. Contact us for further details.

This 3-axis KNUTH HFS 30638 C surface grinding machine was manufactured in 2015. It has a weight of 1,960 kg and has operated for approximately 9,200 hours. If you are looking to get high-quality grinding capabilities, consider the KNUTH HFS 30638 C machine we have for sale. Contact us for further details.

Waldner Dosomat 12.6 filler and sealer for foil trays. Currently set up for using 82mm diameter foils for meat paste like pate or pet foods. Machine is in lovely condition and available for inspection.

SAF OPTITOME 15 CNC plasma cutting machine was built in France in 2003. The machine is used to cut shapes in workpieces made of stainless steel, mild steel or aluminium. Depending on the previously choiceed nozzle, workpieces can have a thickness from 2 or 3 mm up to 18 mm. The high cutting quality is achieved thanks to the use of a lightweight and rigid transverse beam with efficient drive, mounted on an extremely rigid and robust machine frame. The installed working table with dimensions (L x W) of 3000 x 1500 mm allows the reduction of mechanical stresses arising during thermal cutting or sheet loading/unloading. The plasma cutting machine is supplied with equipment consisting of among others: a NERTAJET HP 125 plasma source with a power of 125 A and a DIGISAF 100 CNC control. Technical data of the SAF OPTITOME 15 plasma - materials to be cut: stainless steel, mild steel, alumi ...

WE OFFER AN NICE CONDITION LVD , WE CAN MAKE FOR CUSTOMER AS WELL START UP OF MACHINE INCLUDING TRAINING CUTTING CAPACITY 4KW CUTTING PLATES 6000 X 2000 MACHINE WAS COMPLETE OWERHAULED 2 YEARS AGO - SERVIS COST WAS 35000 EUR LAST SERVICE WAS MADE 6 MONTHS AGO MACHINE RUNNING IN THE PRODUCTION TILL FIRST WEEK IN MARCH 2022 WE OFFER MACHINE LOADED ON TRUCK. NEEDS 2 TRUCK FOR TRANSPORT, NORMAL TRUCK FOR CLIENT WE CAN ORGANIZE TRANSPORT AS WELL WE OFFER MACHINE FREE LOADED ON TRUCK. LASER- GE FANUC C4000 - MODEL E TRANSPORT FOR CUSTOMER WE CAN ORGANIZE AS WELL

Tube cutting machine manufactured in 2020. This Bodor X2260 features a powerful 3 kW laser and is equipped with a CNC control panel interface, automatic chuck system, and a dedicated extraction system. It also includes a tube support roller and conveyor loading bed for enhanced efficiency. If you are looking to get high-quality tube cutting capabilities, consider the Bodor X2260 machine we have for sale. Contact us for further details.

turning diameter: 1250 mm turning length: 1500 mm swing diameter over bed slide: 850 mm total power requirement: 22 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 3100x2150x1825 m Brand: JMTCL Type: CW61125B Distance between centers: 1.500 mm Centerheight: 625 mm Swing over bed: 1.250 mm ø Swing over support: 850 mm ø Maximum turning diameter : 1.250ø x 1.500 mm ø Spindle boring: 135 mm ø The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 450 mm y-travel: 300 mm z-travel: 240 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Matheys Type: 2B Table length: 850 mm Table width: 235 mm X: 450 mm Y: 300 mm Z: 240 mm Maximum speed: 2.500 RPM Variable adjustable speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Deburring machine manufactured in 2006. This TIMESAVERS 41-SERIE-900-WW features a working width of 900 mm and a maximum grinding height of 60 mm. It includes an abrasive belt dimension of 1900 × 930 mm and a rotating disc diameter of 1220 mm. If you are looking to get high-quality deburring capabilities, consider the TIMESAVERS 41-SERIE-900-WW machine we have for sale. Contact us for further details.

This 3-axis CHARMILLES ROBOFIL 240 CC was manufactured in 2003. It has a machine weight of 2100 kg and operates on a voltage of 400 V with a current of 18 A. If you are looking to get high-quality wire EDM capabilities, consider the CHARMILLES ROBOFIL 240 CC machine we have for sale. Contact us for further details.

This 3-axis CHARMILLES Roboform 35 was manufactured in 2004. It features an X travel of 350 mm, Y travel of 250 mm, and Z travel of 300 mm. The machine has a table size of 500 × 400 mm and can accommodate workpieces weighing up to 500 kg. If you are looking to get high-quality die-sinking capabilities, consider the CHARMILLES Roboform 35 machine we have for sale. Contact us for further details.

x-travel: 640 mm y-travel: 200 mm z-travel: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Milko Type: 12 Table length: 1.000 mm Table width: 220 mm X: 640 mm Y: 200 mm Z: 400 mm Spindle taper: ISO 40 Maximum speed: 1.700 RPM Digital readout: Fagor Automatic feeding on X Machine is equipped with Huron head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Various parts for straightening machines Ungerer, strip width 1500 - 1700 mm - Straightening rollers, stutz rollers, bearing frames, coupling shafts .. - Gears - Engine - Gearboxes, etc. More info on request

Working width: 530 mm Length of the planing table: 3.000 mm Number of knives: 4-TERSA St. Motor output: 5,5 kW FIMAL surface planer type PF 530 N --------------------------------------- NEW MACHINE Partnership Edition Technical specifications: --------------------------------------- Planing table dimensions: 3,000 x 530 mm Feed table length: 1,800 mm Dressing fence dimensions: 1,500 x 175 mm Swivel range stop: 0 - 45 ° 4-knife cutterblock system TERSA d = 120mm: 5,000 rpm Max. Chip removal dressing according to CE: 8 mm Motor 380 volts / 50 Hz .: 5.5 kW Sound level according to EN 27960: 82.9 - 88.9 dB (A) Basic equipment: Electrics according to CE standards Magnetic brake Extraction nozzle d = 150mm Bridge protection control panel operated above Original AIGNER aluminum stop with integrated auxiliary stop --------------------------------------- Special offer from stock: 8,990.00 euros  ...

Optical measurement machine manufactured in 2024. This KEYENCE VL 700 & VL770 features a blue LED measurement light source and operates on a power supply voltage of 100 to 240 VAC ±10%, 50/60 Hz. If you are looking to get high-quality optical measurement capabilities, consider the KEYENCE VL 700 & VL770 machine we have for sale. Contact us for further details.

1 of used trayshrinkpacker, make Kisters (KHS), type 97/50. Built 1987 with new controls (Siemens S7, Rexroth servos) fitted in 2012. Originally used to pack the following loose beverage cans as 6x4-24 on tray with film: standard diameter 66 mm and sleek diameter 58 mm at a speed 50 trays/minute (splitter pin collating), as well as slim 53 mm diameter cans at 25-35 trays/minute (gating type collating). Last used to pack various cardboard multipacks (roller-bolt collating) on tray with or without film. Operates from left to right as seen from operator's station.

Specifications Model: 25 lpv Tool holder: MK3 Pinole stroke: 110mm Projection: 400mm Drive: 3 phase motor with 2 motor stages and V-belt drive Speeds 14 / 35 – 65 – 70 – 125 – 130 – 200 – 250 – 335 – 400 – 570 - 670 – 1140 – 990 – 1980 rpm Table dimensions: LxW 330x330mm Machine dimensions: LxWxH 410x700x1830mm On the machine, we installed a new motor and renewed the entire electrical system with the step and motor circuit breaker as well as the cables.

Optical measurement machine manufactured in 2015. This VIRTEK LPS-1EA features a flat inspection table with a glass bed and an overhead laser scanner tower. It includes a standalone workstation with a PC console, monitor, and keyboard. If you are looking to get high-quality optical measurement capabilities, consider the VIRTEK LPS-1EA machine we have for sale. Contact us for further details.

Travel X/Y/Z: 850mm/435mm/210mm, vertical head adjustment: approx. 590mm, table dimensions X/Y: approx. 1570mm/500mm, max. table load: 250kg, spindle taper: Fehlmann SF32, max. spindle speed: 7100rpm, spindle power: approx. 5kW, drilling capacity in steel: 30mm, tapping capacity in steel: M20, control: Mach3 with touchscreen PC, weight: approx. 3000kg. The machine was subsequently retrofitted with a Mach3 control. An on-site inspection is possible.

MAHO C Axis Machine Table - Table diameter: 600 mm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-40 mm/Ø : 0-40 mm/Ø : ±6,5 ° longitudinal feed of the table: 1530 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannung kg cross travel: max. 270 mm : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,05 t dimensions of the machine ca.: 4 x 2 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service fo ...

Rated power at 50%ED: 80kVA Short-circuit current: 35.9kA Electrode force: 100-600daN/DH Projection: 550mm --- Welding control: Filius classic 128 programs Machine control PLC Siemens S7-1200F --- Incl. additional options: - Double foot switch - Safety valve 2-channel - Pressure-free lowering of the upper fitting - Adjustment device - Forearm support - Flow monitor, electronic - Electrode power switch, electronic - Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock --- Further information on our homepage

Rated power at 50%ED: 20kVA Short-circuit current: 11.6kA Electrode force: 180daN Projection: 455mm Arm distance, stepless: 173-410mm Electrode cone: Mk1 --- Welding control: WS 402 (4 times, 2 program) --- Incl. additional options: - Foot switch - Main switch - 3m connection cable and Cekon plug 32A --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

GeneralUniversal Milling Machines; Control: DMG MORI SLIMline® Multi-Touch control Working area 1Longitudinal500 mmCross450 mmVertical400 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minFloor space/WeightDimensions (L x W x H)3,15 x 2,86 x 2,71 (4,82 x 4,16 x 2,71) mWeight approx.5000 KgSwivel Rotary Table Powered B/C AxesSwivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only!Type of Measuring system Direct measuring systemMode for positioning only5. Axes (swivelling range) -5/+110 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeDistance between T-Slots 63 mmNumber of Slots 7Slot width 14 mmMaximum load (table centre) 200 KgTable surface Ø 630 x 500 mmDirect measuring system ...

GeneralUniversal Milling Machines; Control: 3D-control Heidenhain TNC 620 Working area 1Longitudinal500 mmCross450 mmVertical400 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minFloor space/WeightDimensions (L x W x H)3,15 x 2,86 x 2,71 (4,14 x 4,16 x 2,71) mWeight approx.5000 KgSwivel Rotary Table Powered B/C AxesSwivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only!Type of Measuring system Direct measuring systemMode for positioning only5. Axes (swivelling range) -5/+110 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeDistance between T-Slots 63 mmNumber of Slots 7Slot width 14 mmMaximum load (table centre) 200 KgTable surface Ø 630 x 500 mmDirect measuring system X,Y,ZDire ...

small shrink line for sale consisting of vacuum chamber machine C 30 and shrink tank ST 40/60 - both mobile C 30 New machine - ST 40/60 overhauled 2022

Fully automatic stretch film packaging machine with scale & labeler Packing Plant / Wrapper + Labeler DIGI AW-5600 FX The AW-5600 FX is an automatic weighing, packaging and labeling system with high performance for ease of use and environmental friendliness. The packaging machine reduces the workload with easy and simplified operation. It protects film and label consumption through linerless labels in order to keep costs and environmental impact low. Goods such as cheese, meat or fruit and vegetables can be packaged easily and visually appealing. Technical data Wrapper DIGI AW-5600 FX 220-240V / 50-60 Hz / 1.8 kW suitable for Food-Tainer bowls Performance up to 17 packets/min Film width: 350 - 500 mm Year of construction: 2018 Total weight approx. 250 kg Digi marking system 3/6 kg, Min 20g, e=1/2g Calibrated until 31.12.2022 Function tested, ma ...

CME FCM 9000 Bed milling machine 5-axis Table size 9500 x 1200 mm. Travel X-axis 9000 mm. Y-axis 1500 mm. Z-axis 1500 mm. Maximum table load 5000 kg/ Mtr. Vertical milling head can be swivelled by 1°x1° CNC control Heidenhain TNC 430 CB If you have any questions about the machine, as well as a scheduling for viewing, please contact us by phone or e-mail.

WMW BK 50 AI Admission in drilling-spindle (morse): Mk5 Max drill capacity: 50 mm Table dimensions: 490 x 530 mm SPEEDS: 45 > 1000 rpm Max drilling depth: 280 mm Motorpower: 7 kW Length: 1200 mm Depth : 770 mm Height: 2700 mm Weight: 1,7 ton

CNC milling machine Maho MH 600 S (4-axis) – Year of manufacture 1993 – Hobbyist / Retrofit / Spare parts Description: Sell a 4-axis CNC tool milling machine Maho MH 600 S from 1993. The machine worked perfectly until the end, but currently has an electronic error and does not start. The mechanics are complete and offer an excellent basis for conversion to a modern control system (retrofit such as LinuxCNC, EdingCNC etc.) or as a spare parts donor. Technical data: Maker / Model: Maho MH 600 S Year of Make: 1993 Travel (X / Y / Z): 600 x 500 x 400 mm Axes: 4 axes (incl. NC rotary table) Operating hours: 52,858 h Spindle/Head: Swivel Vertical Head Equipment & installed components: NC rotary table (4th axis) with clamped machine vice Control / Rack: Philips CNC (NC 9418 830 02871) Drive technology: Indramat AC servo amplifier & KDV/KVR powe ...

SPECIFICATIONS: 2 brushing units Width transport carpet mm: 400 Workpiece height mm: 10 - 120 Feed speed m/min: 8-12 Installed capacity KW: 2.0

Steinheil KONTUR 408-2/D optoelectronic contour and shaft measuring system High-precision optoelectronic contour and shaft measuring system Steinheil KONTUR 408-2/D with high-quality Jenoptik optics The system is used for contactless, high-precision and fast measurement of rotationally symmetrical components (e.g. shafts, camshafts, turned parts) The device scans the measuring object without contact according to the shadow image principle. Rotational measurements are recorded with up to 1440 measuring points on the circumference per measuring point. The evaluation and quality control is carried out directly via an integrated SPC software (Statistical Process Control) based on Windows NT with clear tolerance bars and diagrams The system is housed in a closed aluminium profile housing with a transparent protective structure and is protected by professional safety light curtains ...

Bous 3-chamber spray cleaning system (direct deoiling) System: 3 separate washing chambers (ideal for washing/rinsing/drying in one pass) Chamber size (W x H x D): 500 x 300 x 1,000 mm (perfect for long, curved workpieces) Equipment: Integrated thermostat for exact bath temperature control Control: Siemens PLC with Siemens SIMATIC Operator Panel Machine already professionally dismantled and ready for loading on pallet "Everything from a single source: We will be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de More items - new and used - can be found in our shop! International shipping costs on request!