foil cutting machine used for sale

MAZAK laser cutting machine STX510 MKIII 4kW TOP CONDITION - LIKE NEW - ONLY 700 RUNNING HOURS year: 2012 refurbished, MAZAK lasercutting machine with 2500W table size: 3000mm x 1500mm machine dimension 2,9m x 7,3m chip conveyor LAN / USB connection automatic nozzle change fast piercing in heavy materials piercing sensor plasma sensor for stainless steel cutting burning sensor for mild stelle cutting full covered machine table FE: 22mm VA: 15mm ALMG: 10mm plastics possible to cut incl. software incl. exhauster option: warranty, setup, training option: fully automatic loading/unloading CELL system

Weight: 27 kg : M3-M20 working range: 200-1900 mm turning speeds: 150/400 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; ready for immediate use

; very good condition, like new

; Delivery time is about 10 weeks

; operational as of week 33

; very good condition, ready for operation

Hydraulic punching and cut-out machine Indumasch punching force max.: 40 t Blechstaerke max.: 10 mm Stroke number: 150 p / min Punch ing diameter max.: 105 mm working area in transverse direction = x: 1000 mm working area in the direction of loading = y: 750 mm Position accuracy: 0.1 mm Total weight with table approx.: 3500 kg incl. Zubehoer under the river to visit; ready for immediate use

; ready for immediate use

Manufacturer: SAF Type: Oxytome 30 Working range: 6000 x 3000 mm Technology: Plasma oxyfuel Built: 2001 Equipment Hardware: 1x SAF Nertajet HP 125 Only very little use 2x SAF Nertajet HP 300 connected in series 1x autogen burner Without fuel cutting tables without filter system Div. Wear parts equipment Control & Software: DIGISAF 500 Machine control Other information: System is available from week 33 cutting performance see PDF assembly and commissioning on request; ready for use from KW 33

SAF Type: Multitome PMD Working area: 5000 x 2000 mm Technology: Plasma-Autogen Year : 12 / 1994 Equipment Hardware: SAF ZIP 5.0 (45A - 150A)(built year 12 / 2000) 1x autogen burner (interchangeable on same support) Without filter system Wear parts Equipment Control & Software: SAF Machine Control (NC System) system is available from KW 20 / 2014 assembly and commissioning on request; available from KW 20 / 2014

; available as of week 20/2014

; ready to use

; ready for immediate use

Copy: 2400mm wide -burning table: 3000mm x 3000mm The system is under power; ready to use immediately

; mint condition, ready for use

; very good condition, like new

Track width: 2100 mm working width: 1500 mm working length: 3000 mm width: 2650 mm CNC Control Omnicom Explorer Color LCD Display 1 torch Plasma suspension pneumatically moving roller sampling Option : Umruestung to arc removal possible Plasma Burner head Percut 100 incl. Lantek Software Expert 2000 extraction system as good as new . The system is ready for pre-use in our factory hall; ready for immediate use

PORO cutting machine with BURNY 2.5 control (with 50 standard macros)+ photo scope (template can be saved), 2 stueck Harris cutting torch cutting range up to 300mm, numerous dues available template table 1250x3000mm, firing table 1500x4500mm. controls shows sporadic

; ready for immediate use

; ready for immediate use

; ready for immediate use

; ready for immediate use

Working range: 2500mm x 6000mm rail length: 8000 mm track width: 3000 mm racks and drive pinion renewed at the end of 2011. Last recovery at the end of 2011. Control Sato CNC 3000 2 x Autogen 1 x Plasma Kjellberg 160 i with automatic gas console (see Pdf) 1 x Support for koerning Complete with table and suction assembly and commissioning on request ; ready for immediate use

Working range : 2500mm x 6000mm 1 x Autogen 1 x Plasma 1 x Drilling unit HP Digital Process Control Plasma Source: Nertajet HP 125 Machine burner OCP 150 Without table and suction Option: suction table and filter unit assembly and commissioning on request; ready to use

Microstep CNC plasma and cutting system working area: 6000mm x 1500mm+800mm 1 x Plasma support ( Hifocus 160i Kjellberg with automatic gas console) (cut and mark see PDF) 1 x Autogensupport incl.

; ready for immediate use

; ready for immediate use

; ready to use

Messer Griesheim Corta P 4000 4 car burner burning table: 4000mm x 3000mm free loading; ready for immediate use

Rebuilt 2006 Cutting width-1.850 mm Feeding height 165 mm max Feeding depth 1,850 mm max Front table length 730 mm Table height 900 mm Equipment air table program cutting line indicator 2 knives pile lift PL 3 Jogger Vibro Info: computer modern cut control

; Available from 37 KW 2016

Messer Cortina Plasma and cutting machine 1 x PlasmaSupport Hypertherm HD 3070 1 x Automotive support Working area: 2500mm x 4000mm under current commissioning on request; ready to use

; ready to use

; now ready

CNC Portal Cutting Machine Manufacturer: ESAB Type: SXE P1 3500 LH Year construction: 2001 CNC control: Vision 51 Working area: 2x6 m Track: 8 m 2 x car use burner under power to visiton request dismantling and commissioning on request; available from 37 KW 2016

TOP STATE - OVERHAUL IN 2016! Year of construction: 2001 2D table format: 2500 x 1250 3D Max processing size: 900 mm x 2150 mm x 300 mm Power: 2000W Control: FANUC incl. cooler incl. 2D programming software + chamfer module + tube/profile module incl. training incl. commissioning incl. quick penetration incl. ball roller table with 3D cutting head incl. CNC tube axle tube and profile up to 160 mm diameter plates, chamfering 3D molded parts, tubes and profiles FE: up to 15mm Oxide-free VA: up to 8mm designed for high pressure cutting up to 20 bar no foundation required! Optional automatic loading and unloading by Mazak FMS48 is available always regularly serviced with warranty / commissioning / training

Zinser LK 110 Photo-optical cutting and plasma cutting system. The system has been upgraded from a control point of view. Cutting is possible via Photokop as well as via Cad / Cam Sytem possible. Optionally, autogen or plasma can be cut. Plasma source : Kjellberg PAS 45 W (cut up to 45mm) suction cutting table: 1.5 x 3m (new) including control PC with Cad/cam system Complete machine bridge available as spare part dispenser. Under electricity to visit .; ready for immediate use

; ready for immediate use

Cutting cutter for small cut - Leo with inlet shaft table railmade made of stainless steel power up to approx. 2000 Broetchen Cutting height adjustable Gebaecke max. 160 x 80 mm, WxH Connection 230V, plug-in mass (WxDxH) in mm: 800 x 440 x 470 optional: -driving table for LEO ; ready to go!

Vertical Bevel-Cutting Machine Manufacturer: Hyma Model: VSL.A.75 Manually operated roller table with aluminium covered table-too Hand-wheel operated rest-plate with ratchet mechanism for repetitive cutting of same width: 0-130mm Inclinable cutting section with four dynamic balance blade-wheels, each suspended between two adjustable bearings Motorised angle-adjustment for cutting section: +/- 60 degrees. Electric blade drive motor Twister double-edge ground bank knife for cutting in forward and reverse movement of roller table Blade tension control with indication lamp and automatic cut-off on blade slackness and breakage Manually height-adjustable blade guard and fine-adjustable blade guide rollers above and below table Friction grinding apparatus with two adjustable cupstones Electrical control box mounted on table front, adjacent to operator Standard dimensions: Cuttin ...

KR-DUO cutter system Individual adjustment of the size of the piece Suitable to baking sheets 600 x 400mm as well as 600 x 200mm (as well as intermediate size) The longitudinal cut is effected in the lower cutting level The lateral cut is effected in the upper cutting level For every cutting level an individual number of cutting passes can be chosen. The machine is manufactured exclusively from food-grade materials. Power: 380V, 50 Hz, 3 Ph

Power: 4 kW X - axis: 2520 mm Y - axis: 1550 mm Number laser heads: 0   CNC Brand: Fanuc CNC Model: 160i-L AMADA - LC 2415 A3 CNC Laser cutting machine 4kW 2500 x 1500 mm MACH - ID 6348 Make: AMADA Type: LC 2415 A3 Control: Fanuc 160i-L YOP: 2004 Hours: 11753 Working area X Axis    2.520 mm Working area Y Axis    1.550 mm Working area Z axis         300 mm Table Length          2.550 mm Table Width            1.550 mm Power resonator      4 kW kW / Amp Feed rate X-Axis      80,000 mm Feed rate Y-Axis      80,000 mm Feed rate Z-Axis      80,000 mm Sheet master loading arm     Yes Sheet tower storage        Yes Dust collector  ...

Power: 3 kW X - axis: 0 mm Y - axis: 0 mm Number laser heads: 0   MACH-id    5179 MAKE         Bystronic TYPE           Bystar 3015 YOP             1998 SPECIFICATIONS Control      Bystronic Guillotine / Lazer / Cutting table     Laser cutting Working area Length x Width      3000 x 1500 m Max. Cutting height / rotation °     200 Number of controlled axis        3 Power resonator kW / Amp      3.5 kW Filtration / Collector    Yes DIMENSIONS Length        10.000 mm Width        5.000 mm  

PIN cutting machine Berrone one-sided for window manufacturing with pneum. Stop 1. trimming saw 2. pivot cutters top / bottom 3. Groove cutter L x W x H: 250 x 200 x 200 cm Year of construction 1983 Weight approx. 750 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Wire staerke range: 2.0 - 6.0 mm sectional slats: max. 500 mm suitable for round, profile and flat drainage; ready for use

Type Gemini 4000 Bj.11/2007 8000mm Laengslaufbahn 2 x Autogen burner 1 x Plasmasupport Preparation Working area 3500mmx6000mm without filter system, without burning table. commissioning on request ; ready for immediate use

wire diameter range: 2,0 - 6,0 mm cutting length: up to 500 mm suitable for Round- Profil- and Flatwire; ready for operation

Wire range: a) up to 800 N/mm2 = 6.0 - 15.0 mm b) to 1200 N/mm2 = 6.0 - 12.0 mm c) to 1400 N/mm 2 = 6.0 - 11.0 mm section: up to 14,000 mm feed speed: 22 - 120 mtr./min machine was partially overhauled and repainted; very good

Wire diameter range: 8.0 - 16.0 mm section sections: up to 14,500 mm feed speed: up to 50 mtr/min machine has been repaired, repainted, repainted + new electrics; ready for use