foil cutting machine used for sale

x-travel: 0 mm y-travel: 0 mm table length: 600 mm table width: 400 mm total power requirement: 2 kW weight of the machine ca.: 1500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel diameter: 300 mm table length: 0 mm table width: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: 1/16 - 2 threading length: 165 mm thread pitch: mm turning speed range: 40 - 53 U/min voltage: 230 V total power requirement: 1,7 kW weight of the machine ca.: 50 kg dimensions of the machine ca.: 1,10 x 1,10 x 1,10 m - Serial-No.: 34024750 - foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 6000 mm table width: 2500 mm burner heads: 1 z-axis: 210 mm Table load: 2600 kg total power requirement: 3 kW weight of the machine ca.: t dimensions of the machine ca.: m capacitive tactile sensing changing table Nachtaktmöglichkeit filter system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: M3 - M16 mm turning speeds: 300 U/min throat: 100 - 950 mm weight: 25 kg Pneumatic tapping machine up to M16, with a large radius. Supplied with various adapters, e.g. for drilling and a 90° adapter for tapping in all directions. Accessories: M3-M16 supplied with reducer/lubrication set including tapping adapters (6 pcs) including air motor size 1 adapter connection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speeds: 400 U/min : M3 - M12 throat: 100 - 950 mm weight: 16 kg The AQ 950 series pneumatic tapping machines have a radius of up to 950 mm. The construction of the machines enables you to get to the work piece quickly. For professional use. Easily mounted on a work surface. Accessoiries: M2-M12 supplied with reducer/lubrication set including tapping adapters including air motor size 1 adapter connection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speeds: 700 U/min : M2-M8 throat: 100 - 900 mm weight: 16 kg The AQ 950 series pneumatic tapping machines have a radius of up to 950 mm. The construction of the machines enables you to get to the work piece quickly. For professional use. Easily mounted on a work surface. Accessories: M2-M8 supplied with reducer/lubrication set including tapping adapters including air motor size 1 adapter connection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: M2 - M 12 mm : 9,5 mm turning speed range - thread cutting: 250 U/min collet holder: 6 / M2 - M12 Air consumption: 0,4 l/min. turning speeds: 250 U/min weight: 4 kg Pneumatic driven tapping pistol for quick operation on spot. Professional excecution. Standard collets do fit. Features: pneumatic drive system wrench The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speeds: 400 U/min working range: 500 - 1600 mm thread: M3 - M 12 collets: 6 weight of the machine ca.: 20 kg The AT II series pneumatic tapping machines have a radius of up to 1600 mm. The construction of the machines enables you to reach the workpiece quickly. Easily mounted on a work surface. For professional use. Accessories: M3-M12 supplied with reducer/lubrication set including tapping adapters (6 pcs) including air motor size 1 adapter connection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used machine in good condition. Available for immediate delivery. - Working area (X x Y x Z): 1.562 x 772 x 100 mm - Max. workpiece weight: 80 kg - Positioning speed X/Y: 100 m/min - Simultaneous positioning speed: 140 X+Y m/min - Dimensions (long x wide x high): 6.000 x 6.400 x 2.150 mm - Laser Output: 2,2 kW - Laser Type: CO2 - Maximum material thickness mild steel: 10 mm - Maximum material thickness stainless steel: 6 mm - Maximum material thickness aluminium: 8 mm - Weight: 13.500 kg - Beam ON Working hours: 2.000 h - Electric consumption entire unit: 37 kW

- 115mm cutting head - Conveyor belt on the left - Nozzle changer - LoadMaster with sheet separator - Warehouse interface - Laser Type: CO2 TruFlow - Working area (X x Y x Z): 3.000 x 1.500 x 115 mm - Max. workpiece weight: 1.100 kg - Simultaneous positioning speed: 300 X+Y m/min - Laser Output: 7 kW - Maximum material thickness mild steel: 30 mm - Maximum material thickness stainless steel: 25 mm - Maximum material thickness aluminium: 20 mm - Control: SIEMENS SINUMERIK 840D - Machine ON Working hours: 49.815 h - Beam ON Working hours: 27.724 h - Electric consumption entire unit: 35 kW - Dimensions (long x wide x high): 11.000 x 4.600 x 2.400 mm - Weight: 12.000 kg

CNC - Control Makino Travel x/y/z 370 mm / 270 mm / 220 mm workpiece dimensions L/W/H 790 mm / 670 mm / 220 mm Wire diameter range 0.1 mm – 0.25 mm workpiece weight 600 kg cone at 100 mm height +/- 15° Mitsubishi - Axle Drives

Fogg & Young Bale Cutter

Gebr. Bread slicer Herlitzius SHOP, machine no. 30SHN339, 50 Hz, 400 V, 1.1 kW, in stainless steel version

Gebr. Wabäma Circumat Elektronik 380.260, with circular knife, 1.5 kW, machine no. 04020665

Used machine in good condition. Available for immediate delivery. - Working area (X x Y x Z): 12.000 x 3.000 mm - Laser Output: 3 kW - Maximum material thickness mild steel: 20 mm - Maximum material thickness stainless steel: 10 mm - Maximum material thickness aluminium: 3 mm - Machine ON Working hours: 200 h

3000x1500mm

4000 x 2000mm 4000w LOW HOURS

A used bread slicer Treif Pegasus 2602 from 1997 is currently for sale and immediately available in our warehouse in Bielefeld. Bread slicer Treif Pegasus 2602 - Bread slicer without oiling - for long loaves of bread - completely in stainless steel - with cress knife - can be driven on castors - Year of construction 1997

Combination machine Manufacturer Mubea Type KBL100 5-fold combined Flat steel shears 150x19mm Profile steel shears e.B angle iron 160x7mm or 100x12mm Bar steel shear 70mm round Hole punching Jack 16mm All information to the best of our knowledge, but without guarantee!

with Loading and Unloading system - Working area (X x Y x Z): 3.065 x 1.539 x 150 mm - Laser Type: CO2 - Simultaneous positioning speed: 80 - 110 X+Y m/min - Laser Output: 2,5 kW - Maximum material thickness mild steel: 8 mm - Maximum material thickness stainless steel: 8 mm - Maximum material thickness aluminium: 5 mm - Control: PRIMACH 20-L - Machine ON Working hours: 45.935 h - Power: installed max: 76 kW - Weight: 10.000 kg - Dimensions (long x wide x high): 10.600 x 3.540 x 2.500 mm - Electric consumption entire unit: 49 kW

Hartmann Slicer Bread Slicer Machine Type: SL50 Slicer Year of construction 1997 Weight: 1900kg 400V 50Hz with bread supply Feed belt Compressor closure analog control without knife

Hartmann Slicer Bread Slicer Machine Type: SL50 Slicer Year of construction 1997 Weight: 1900kg 400V 50Hz with bread supply Feed belt Compressor closure analog control without knife

Treif Diskus Smart Circular Knife Machine digital control Circular knife Cutting width adjustable from 4mm to 15mm 400V 50Hz Stainless steel cladding Weight approx. 150 kg Operating voltage 400 volts Control voltage 24V/DC V AC Rated power 0.9 kW Height: 110cm Width: 65cm Depth: 70cm

Graef Euro 2250 Knife diameter 220 mm Cutting height 155 mm Cutting length 220 mm Cutting thickness 3-15 mm Tabletop unit Footprint 460 x 320 mm Stock: 50 pieces

Cutting machine Polar 137E B.J. 1996 complete with two lifts

Treif bread slicer Type: Pegasus Sichelmesser Machine Cutting width: 4 – 14 mm adjustable analog control Stainless steel cladding 380V 50Hz Height: 120cm Width: 100cm Depth: 80cm

The STIGAL DYNAMIC SPEED HQ 1500X3000 plasma cutter was manufactured in 2013 by the Polish company Stigal. A computer-controlled thermal cutter is designed for cutting out shapes from a sheet of metal. It is equipped with, among others in: CNC G-CODE control, CAD / CAM WRYKRYS software, CEBORA PROF 165 HQC aggregate, or a cover protecting the operator's eyesight. The cutter's cutting width is 1500 mm, length is 3000 mm and the thickness is 20 mm. The machine's torch moves at a speed of 330 mm / s and cuts metal sheets with a maximum thickness of 20 mm. The total weight of the machine is 3 tons. Technical data of the STIGAL DYNAMIC SPEED HQ 1500X3000 cutter - cutting length: 3000 mm - cutting width: 1500 mm - maximum material thickness: 20 mm - maximum cutting thickness: 20 mm - permissible table load: 150 kg / m2 - maximum travel speed: 90 m / min - type of burner height adju ...

Slicing bread Ipeka MC easily replaceable blade system; efficiency depends on the consistence and size of the product; slicer’s speed: up to 4000 pcs/h. voltage: 400 V, 50 Hz, 3-phase

Rego Herlitzius Roto Shop DL Circular knife machine Stainless steel version mobile Knife reground and coated manual operation via rotary knob Cutting width 3 - 16mm Connection 400V, 16A-CEE plug Bread shaft: 40 x 23 cm Dimensions: 1000 x 700 x 1050 mm, WxDxH Cleaning machine

Bread slicer Primo Creel cutting machine table model with base frame Cutting thicknesses 10 mm bread dimensions: 440 x 300 x 170 mm, WxDxH Manual operation with crumb drawer DGUV V3 tested Connection 380V, 500 Watt, 16A-CEE plug Dimensions: 700 x 670 x 1360 mm, WxDxH Demonstration machine / new machine with warranty

Wabäma Bread Slicer Sichelmesser Machine Cutting width: 4 – 20 mm adjustable digital control Stainless steel cladding 400V 50Hz Height: 110cm Width: 100cm Depth: 70cm

Jac Bread Slicer Gate Type: BFM 450 / 10 Gate machine Cutting width: 9mm Manual operation Speed controller 400V 50Hz Height: 107cm Width: 60cm Depth: 80cm Front lid does not close properly

Herlitzius bread slicer Type: Planet 3000 Year of construction: 2002 Circular knife machine Stainless steel cladding  with switch box Inlet height and width Adjustable digital control Industrial Machine Height: 220cm Width: 310cm Depth: 142cm

Wabäma Bread Slicer Cutting width: 8mm digital control 230V 50Hz Height: 117cm Width: 60cm Depth: 80cm

Treif Diskus Smart Circular Knife Machine digital control Circular knife Cutting width adjustable from 4mm to 15mm 400V 50Hz Stainless steel cladding Weight approx. 150 kg Operating voltage 400 volts Control voltage 24V/DC V AC Rated power 0.9 kW Height: 110cm Width: 65cm Depth: 70cm

Treif Diskus Smart Circular Knife Machine Year of construction 2012 digital control Circular knife Cutting width adjustable from 4mm to 15mm 400V 50Hz Stainless steel cladding Weight approx. 150 kg Operating voltage 400 volts Control voltage 24V/DC V AC Rated power 0.9 kW Height: 110cm Width: 65cm Depth: 70cm

Treif Diskus Smart Circular Knife Machine digital control Circular knife Cutting width adjustable from 4mm to 15mm 400V 50Hz Stainless steel cladding Weight approx. 150 kg Operating voltage 400 volts Control voltage 24V/DC V AC Rated power 0.9 kW New Control Board 7 Motherboard New control board New sensor New circular knife with Teflon coating Height: 110cm Width: 65cm Depth: 70cm

Diameter: 0 mm Length: 0 mm Pitch: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Module max.: 1.25 mm External thread: diameter min.: 2.5 mm max. diameter: 13 mm Gewindelänge: 110 mm Workpiece length max.: 300 mm Werkzeugspindeldrehzahlen: stepless from: 4000 rpm up to: 6000 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.1 kW Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1800 mm Width: 1400 mm Height: 2000 mm Various accessories: Lamp Status light

The IQM MICROSTEP SPLR 6001.25 Pr BEM 12 CNC plasma cutter was manufactured in 2008 by the Slovak company IQM s.r.o. Thanks to the rotary head tilted by ± 50 degrees, it is possible to cut sheets of various thicknesses - 25 mm with a burner tilt of 50 degrees, 35 mm with a burner inclination up to 25 degrees and 50 mm with a zero burner inclination. The working table has a bridge structure with pneumatically opened sections, and its dimensions are (L x W) 6000 mm x 2500 mm. The burner is equipped with, among others in: MSNC 500 CNC control, AsperWin software with AsperBevel module or Hypertherm HPR 130 plasma unit. The total weight of the R-SPLR 6001.25 PrBEM12I (G) plasma cutter is 5000 kg. Technical data of the IQM MICROSTEP R-SPLR 6001.25 PrBEM12I (G) CNC plasma cutter - dimensions of the working table (length x width): 6000 x 2500 mm - type of working table: bridge with pneum ...

X – Axis Travel (600 mm) Y – Axis Travel (400 mm) Z – Axis Travel (270 mm) U, V Axis Travel (80 x 80 mm) Wire Diameter Range (min ~ max) (0.10 ~ 0.30 mm) Work Tank Dimensions (W x D) (1040 x 780 mm) Maximum Workpiece Weight (850 kg)

Only used for tests Includes: Double table New welding head - Laser Type: CO2 TruFlow - Working area (X x Y x Z): 4.000 x 1.500 (2 x 2.000 x 1.500) mm - Positioning speed X / Y / Z: 100 / 100 / 100 m/min. m/min - Maximum axis speed of B Axis: 90 1/min - Maximum axis speed of C Axis: 90 1/min - Laser Output: 6 kW - Control: SIEMENS Sinumerik 840D - Machine ON Working hours: 31440 - Beam ON Working hours: 3.242 - X Axis travel range: 4.000 mm - Y Axis travel range: 1.500 / 2.000 mm - Z Axis travel range: 750 / 1.000 mm - B Axis travel range: ? 135 ? - C Axis travel range: n x 360 ? - Position accuracy of linear axes (X / Y / Z): 0,08 mm mm - Positioning accuracy of rotary axes B / C: 0,015 ? ? - Dimensions (long x wide x high): n/a mm

Used machine in good condition. Available for immediate delivery. - Laser Type: CO2 TruFlow - Working area (X x Y x Z): 3.000 x 1.500 x 115 mm - Max. workpiece weight: 1.100 kg - Simultaneous positioning speed: 300 X+Y m/min - Laser Output: 6 kW - Maximum material thickness mild steel: 25 mm - Maximum material thickness stainless steel: 25 mm - Maximum material thickness aluminium: 15 mm - Control: SIEMENS SINUMERIK 840D - Machine ON Working hours: 49.715 h - Beam ON Working hours: 18.000 h - Electric consumption entire unit: 35 kW - Dimensions (long x wide x high): 11.000 x 4.600 x 2.400 mm - Weight: 12.000 kg

Jac Bread Slicer Gate Gate machine Cutting width: 10mm Manual operation 400V 50Hz Height: 110cm Width: 60cm Depth: 80cm

Rösen & Robbert Bread Slicer Type: Spa Bayern analog control Cutting width adjustable from: 3 – 15mm for cutting round and elongated breads with lubrication system can be driven on castors External dimensions width 104cm depth: 75cm height:107cm

Offer via gebr. Pipe cutting and chamfering machine Fabr. GF Type GF20 AVM with lifting table Specifications: Pipe outer diameter 283-508mm Wall thickness 1 - 15mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 50 - 163 rpm. Speed levels electronic 1 - 6 Power 1800 W

Offer via gebr. overhauled tube cutting and chamfering machine Fabr. GF GEORG FISCHER Type RA8 / RA230 Saw was completely overhauled and tested. - Gearboxes restocked and new seals Specifications: Pipe outer diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz Speed levels electronic 1 - 6 Power 1600 W incl. mounting plate used, in good condition.

Offer via Gebr. Tube cutting machine Fabr. GF GEORG FISCHER Type RA12 Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed Speed levels electronic 1 - 6 Power 1600 W used, in good condition.

Operating hours machine: approx. 59,000 h (stand 11-21) Operating hours laser: approx. 11,000 h (stand 11-21) Working area X x Y x Z: 3048 x 1524 x 170 mm Laser Laser Type: DC Semiconductor Excitation Laser power CW: 4400 Watt Laser power range: 150 - 4400 Watt Machine CNC control: Bystronic Byvision Cooling unit: E. Furrer WKL 430 Dust collector: Donaldson Torrit DFPRO 6 SPRK Total electrical connection: 52 KW machine + 5.5 KW suction Space requirement approx.: 12,900 x 7,100 x 2,070 mm Total weight approx.: 15.000 KG Cutting material types and thicknesses Steel ( EN 10027-1 S 235JR+AR o. correspondingly. Raex quality) 25 mm Inox ( EN 10027-2 1.4301 (X5CrNi18-10 ) 20 mm Aluminum alloys (e.B. 3.3535 AlMg3 ) 12 mm Machinery Standard: • Cutting machine with operator protection according to occupational health and safety regulations in the cutting, lo ...

AMG S820 plasma-gas cutting machine built by the Taiwanese company ASIA MACHINE GROUP in 2013, is used for precision cutting of workpieces made of carbon steel and acid-resistant steel. The machine characterised by a robust and high-quality construction has two torches – a HYPERTHERM plasma torch with THC voltage height adjustment and collision protection, and a KOIKE gas torch with functions for automatic piercing. The plasma cutting machine performs workpiece cutting processes on a large work table of surface area (L x W) 6100 x 2500 mm with an additional laser pointer to facilitate workpiece positioning on the table. In order to eliminate any contamination generated during laser and gas cutting, the usual exhaust extraction has been replaced by an waterbed table powered by water with a pressure of up to 2 bar. The water mirror in the table’s bath effectively absorbs the exhaust ...