foil cutting machine used for sale

MUTI chain mortiser and bits model OMS 4MM for locks: • Vertical unit with chain, 3 hp motor • Vertical unit with 2 points, 0.75 hp motor • Horizontal unit with 2 points, 2.5 hp motor • Weight approx. 550 kg • Machine not according to CE standards, for export AVAILABILITY FROM APRIL 2024

A Theisen & Bonitz with 10 stations and HFS is offered. Format 35 X50 cm, 30 cm stacking height Pictures and further information on request.

A Theisen & Bonitz with 10 stations and HFS is offered. Format 35 X50 cm, 30 cm stacking height Pictures and further information on request.

Cutting mill / pipe cutting mill Special mill for shredding pipes Feeding via feeding shaft (rope pull system) Manufacturer: NEUE HERBOLD, D-74889 SINSHEIM Rotor diameter: 800 mm Working width: 600 mm Drive: 110 kW

unknow A9020411 (12-14)-

Operator Panel

unknow GE.570205.0002.00, part of the set-

Main Rack

BARCO HULPFUNCTIE 16 DIG OUTP

BARCO FLOPamp;KBRD INTF MNC95

Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Polar 115X guillotine Polar RAB4 jogger + Bizerba scale Polar LW-1000 lift

1 x Polar N137 Plus guillotine (year 2013), equipped with: air table, 2 side tables, 2 knives, photo cells, program 1 x Polar EL 130-4 unloader (year 2013) 1 x LW 1000-4 stack lift (year 2013) 1 x Polar RA-4 (year 2013)

1370 mm Air Photocell Digital Programmed Additional Knife Very Good Condition Immediate Delivery

1 x Polar 137 XT guillotine, equipped with : air table, 2 side tables, 2 knives, photo cells, program 1 x Polar TR 130ER-4 unloader 1 x LW 1000-4 stack lift 1 x Polar RA-4

Max. die-cut size: 230 x 230 mm (23x23cm) Min. die-cut size : 10 x 10 mm (1x1 cm) Max. Stack Height : 170 mm (17cm) (Height of cutting die 60 mm) Die-Cutting pressure : 5.700kg Die-Cutting strokes max: 11 p/min Max. machine output 660.000 sheets/h (feeding 1.000 sheets, label paper 80 gsm) Weight: 855 kg Very good condition

Thread cutting power M 2 - M8 Speed: 700 rpm, luf requirement: 750 l/min, pressure 6 - 7 bar, working range extension: 300 - 1900 mm, Afbau parallel arm: stable arm structure made of hard aluminium profile (38x29) Weight: 23 kg, adapter holder: TCS 1 B - incl. 6 safety slip couplings according to your choice year: 2009

automatic CUTTING BORING and MOULDING machine BACCI TTF1 2TM . second hand machine working conditions : Excellent hydraulic drive of all the movements volt. 380/50 CE mark : YES Machine suitable for assembling part of chairs, tables, frames, furniture, wheelchair frames, etc. The BACCI TTF1 2TM performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined . the milling unit is composed of n.02 spindle moulders ( anti-splinter system ) machine composed by 3 working units : 1- Cutting unit : circular saw max.diam. mm.400 motor power Hp 3 2- Boring unit : boring head with 5 mandrins motor power Hp 3 3- Moulding unit . with automatic movement of the carriage on recirculating ball bearings n.02 spindle moulders (anti-splinter) motor power Hp 7,5 spindle diam. mm.35 hydraulic unit motor power Hp 2

CNC firing and plasma cutting machine Zinser 2115 / CNC 500/E, 2 x 5 m Year construction year: 2000, condition very good, Technical data: Working width: 2,250/2,000 mm x working length: 5,000 mm (can be reprinted) track width: 2,750 mm, Total machine length: currently 7,000 mm (can be relocated), positioning speed: 12,000 mm/min. processing speed: 50 - 6,000 mm/min. 2 torch wagons with three-hose machine cutting torches and dues 3-160 mm ( 300 mm) , ( 1. Torch wagon with preparation plasma separators) CNC control: Zinser CNC 500 E with 50 markos (standard figures), Option: e.g. plasma cutting machine Hypertherm HT 40 with machine torch hose package for the sheet metal range up to 12 mm (or see other options plasma cutting equipment) With complete document with software and floppy disks New price of the machine ( 72,500 EUR + 7,640 EUR for MCC 4.5) Price: 19,950 EUR Options ...

; in stock

; ready

Description: plasma cutting system possible welding processes: plasma cutting with standard gases plasma cutting with oxygen (fine cutting technique) -autogen-burning cutting cutting speed: per sheet metal base up to 8m/min cutting length (x-axis):4300mm cutting width (y-axis):2100mm cutting thickness for plasma cutting: -for stainless steel=max.130mm;for normal steel (liquid steel)=max.40mm -for light metals/ Alloys=max.150mm burner adjustment distance: 250mm Plasma power source: 1. Nertajet 320-640 (2x parallel) Insulation class H; Protection class IP 23; 30Hz 2. Nertajet 120H-Autonom Road dimensions: 6400x400x550mm cutting table Ground: 4500x2600x670mm Equipment: Smoke extraction via suction table Smoke disposal by filter system Cooling of Et Scheid IK-V 18 Plasma cutting torch Autogen cutting torch roadway (rail) length 6400mm cutting table length 4500mm To ...

CNC-controlled flatbed cutting machine Satronik DS 2500 double-sided. synchronized rack-and-pinion pinion drive in laeng axle game-free timing belt drive in transverse axis, drive system with 3 drive motors working width: 2500 mm Total width: 4000 mm feed: 0 -12000 mm/min 1 x Autogen 1 x Plasma (option) CNC 801 CNC web control CNC 801 - driving control unit/user interface SATO PLC - 80486 Simple and over-the-top menu for programming control panel with large-scale touch switches for all machine functions CPU 80486 DX4 32 Bite CPU/75MHz 10.4 LCD screen Essi format (ISO 6582) Floppy drive 3.5, 1.44 MB (default) 2 pcs. Interfaces V 24 (RS 232C) Flash memory for operating system and 512K for user programs 4 MB memory function list (excerpt) 54 Standard shapes Graphically underscored part programming Programmable cutting joint display of the plate sizesize plate r ...

MicroStep CNC guide machine AQUACUT 3001.15 W working area (3000mm x 1500 mm) high pressure pump: KMT Streamline Pro I 60 S, 6200 bar cutting up to 300mm only 4 000 operating hours Including osmosis water treatment system (12,000,- Euro) The AQUACUT is a robust and very practical CNC guide machine in portal construction, specially developed for continuous use in water jet cutting. The high dynamics of the system are overpowered by a low-set machine portal, digital DC servo motors with play-free transmission and practical, stainless linear guides in all three axes. In combination with an HD pump, the AQUACUT can be used to cut solid metals, hard rock, marble, armoured glass, ceramics, plastics, corrugated board, foams, as well as composite materials. assembly and commissioning on request. ; ready for immediate use

Cutting cutter Kjellberg-Eberle - used Type: SII20 Machine No.: 1331 - 220 V, 50 Hz, 2.5 kVA, IP 31 - on 04.02.1990 a new control system (NS 3003) was installed by Etek - Built in 1974 - 4 burners - Table dimensions: 6m x 2.50m - Total area: 6m x 5.5m x 2.4m In good condition!

The CNC-controlled autogen/plasma cutting machine RUR 2500GP is a completely welded portal construction without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HPR260XD plasma system is suitable for use in sheet thicknesses up to 64 mm. The system delivers a high-quality cutting quality, high productivity and reliance with low operating costs. Equipment: ? CNC control system Pierce-19 with 19 touchscreen ? Energy chains with cables and loops ? A motorized plasma torch with automatic initial setting and burner ? Pneumatic anti-collision system ? Plasma cutting unit HPR260XD for cutting structural steel up to a material thickness of 64 mm, hole piercing up to 38 mm, beard-free cut up to 32 mm, manual gas console ? Two three-burner autogenschraegschneidkoepfe with electrical finishing and burner attachment control for  ...

The CNC-controlled plasma cutting machine RUR 2500P is a completely welded portal construction without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HiFocus 161 i plasma system from Kjellberg with Contour Cut is suitable for use in the sheet thickness range of 0.5 - 40 (50) mm. As a soft switch inverter, HiFocus 161 i offers a fully electronic power source for the power range up to 160 A. The system is the multi-talent of plasma cutting technology for marking and cutting construction blades, alloyed steels, aluminium and all electrically conductive materials. (see Pdf ) Equipment: ? CNC control system Pierce 19 with touchscreen ? A motorized torch with automatic initial setting and burner ? Plasma cutting unit HiFocus 161 i for cutting structural steel with recommended material thickness of 0.5 - 38 mm, hole bars up  ...

CNC Portal plasma cutting machine Manufacturer: Messer Griesheim Type: Cortina DS2600 Year of construction: 1997 CNC control: KS30 Cutting area: 1. 5 m x 3 m Vacuum table: Size 1.5 x 3 m 2 Plasma torch Power source: Hypertherm MAX 100 d Filter system Cutting software IBE CNC cut

Format (cm): 76

very well preserved, fully reconditioned MAZAK laser machines with 1500W Table format: 2500 x 1250 mm minimal footprint by 2, 6 m x 6, 5 m Small part conveyor completely encapsulated engine cover FE: up to 12mm VA: up to 6mm Plastic can incl. software including warranty incl. extraction incl. commissioning + training

AUTOMATIC CUTTING , BORING and MOULDING machine type PADE 1000 N Machine suitable for assembling part of chairs, tables, frames, small furniture, wheelchair frames, etc. The PADE 1000 N performs the operations of Cutting , milling and drilling at the end of the piece, either singularly or differently combined. All movements of the machine are controlled by pneumatic devices. composed by 3 working units : 1- Cutting unit circular saw diam. mm.350 motor power hp 3 2- Boring unit boring head with 5 / 7 mandrins motor power Hp 3 max. working stroke of boring unit mm. 130 3- Moulding unit vertical spindle for moulder motor power Hp 5,5 spindle diam. mm.30 pneumatic sliding carriage volt. 380/50

Cortina DS 3100, working range: 8,000 x 2,000 mm, year of construction Dec. 2004 CNC-controlled cutting machine with robust bridge suspension, form-fitting longitudinal drives and precisely machined guide profiles, Connection voltage: 400 V 50 Hz, TN-S mains (A/PE/N) track width: 3100 mm working width: 2000 mm dead length: 1500 mm Total width: 3525 mm Operating side: left power supply: right fuel gas: propane incl.: OmniCom Explorer C drive 15 m/min DC dual-sided Longitudinal drive on rail feet machine cutting torch ALFA (with internal ignition) OmniFlow automotive supply (gas quantity control up to 6 burners) OmniFlow Control torch suspension OmniLift 200 SensoMat ALFA SensoMat ARC/SR Plasma SetControl, tactile first height detection interlock for a maximum of 2 systems HT 4400 HySpeed fine beam plasma cutting system cutting up to 50mm energy supply via energy chain (autogen/plasma) cu ...

Bread cutting machine with cutting width adjustment of Wäbama type Circumat.The machine runs without oiling, with round knife and digital control.Suitable to cut breads up to 38cm wide.Right tray is inserted then the loaves are moved by means of sliders to the left Pushed. In the middle between left and right tray the knife rotates and cuts the bread in the desired thick. The cut discs are pushed into the left compartment where they are straightened medium disc holders. After cutting, mam can take out the slices and bag them on the icing rail. Easy operation and cleaning of the machine, little space requirement.Payment and shipping on request. Wabäma Circumat Bread Cutting Machine Circular knife machine Cutting width adjustable Current type three-phase current Operating voltage 400V Control voltage 24 volts Rated current of the machine 1.9 A Insurance in the supply line  ...

Sheet: 3000x 1500mm Laser: 4000w Auto pallet changer / Extraction

Die Cutting Machine Unitec T1060 Die Cutting Machine Unitec T1060 The T1060 automatic machine with or whithout stripping is used to diecutting and creasing paper, cardboard and corrugated and operations for cardboard boxes, paper labels and especially for delicate printing jobs such as cigarette packages, wine, gifts and cosmetics, etc. This machine works automatically throughout its process, with a user-friendly interface to control the cutting speed, number of sheets cut, total operating hours and its working status, as well as to dynamically control the PLC inputs and outputs, and malfunctions to facilitate operation control and troubleshooting. In addition, the machine also features self-testing (e.g., double sheets, missing sheets, accumulated sheets, or fallen sheet detection) and continuous process sampling, while providing you with a solid cutting and accuracy registr ...

Waterjet 2x3m demonstration plant about 50 hours with comfortable visualized CNC control, and comfortable CAD connection. Cutting table made of stainless steel. The plant is connection, etc. in mint, latest cutting software, AutoCAD Used pumps either Knam/H2O 40HP alternative KMT/Ingersollrand SL4 30hp completely overhauled. New surcharge KMT SL5 classic 50PS/37KW 90.000,00 Construction training & service directly from the manufacturer, including

Waterjet 1x2m demonstration plant about 50 hours with comfortable visualized CNC control, and comfortable CAD connection. Cutting table made of stainless steel. The plant is connection, etc. in mint, latest cutting software, AutoCAD Knam/H2O pump 22 HP. 65.000,00 Construction training & service directly from the manufacturer, including

3000 x 1500mm 6000w Auto pallet changer Siemens 840 Beam on: 17429 Laser on: 34280

Bread cutting machine Rösen & Robbert SPA 38 used sickle knife bread cutting machine with adjustable cutting width for breads up to 38cm long suitable for cutting and halving dark breads.Used bread cutting machine with cutting width adjustment of Rösen & Robbert type SPA 38.The machine runs with oiling, with sickle knife and digital steurung.Geignet to cut breads up to 38cm wide.Right compartment is inserted bread then the bread is inserted to the left. In the middle between left and right compartment, the knife rotates and cuts the bread in the desired thickness. The slices are pushed into the left compartment where they are just selected mid-disc holders. After cutting, mam can take out the slices and bag it on the tray. Easy operation and cleaning of the machine, little space requirement.Payment and shipping on request. Bread cutting machine R&R Type: SPA 38 for loaves up  ...

Producer: GRAEF Type: EURO 2560 S Power supply: 230V / 50 Hz Power: 0.3 kW Slicer cutting machine GRAEF type EURO 2560 S Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

3000 x 1500mm Year: 2004 Cutting hours: 21,350 Turbo: 37,990 With Byloader / Pallet change

Producer: Ma-Ga Type: A2-812 Construction year: 2014 Power supply: 230V/50 Hz Dimensions of the table: 300 x 250 mm Thickness of the discs: 0-28 mm Maximum dimensions of cutting: 230 mm (length), max height from the product 190 mm External dimensions: 635 x 500 x 540 (H) mm Electronic disc counter Maximum disk number 999 Built-in Sharpener Diameter of the blade: 300 mm Weight: 50 kg Slicer cutting machine Ma-GA type A2-812 Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Index Cutting Machine Hunkeler Model RE32 Year 1975 Capacity up to 8 mm Tool width up to 320 mm Tools 1 straight angle tool with a small radius is included (R=1,5 or R=2mm?) Details machine has undergone a electrical and mechanical modification to ensure a safer working Available direct

Fully automatic bread slicer MHS Type: MHS IDEAL SB specifications: Round knife cutting bread slicer oil-free cutting even of warm breads 3 cutting thicknesses selectable: 8mm, 10mm and 12mm Bread passage: L 380 x H140-160 x D280 mm automatic bread gripper suitable for all types of bread with Bread rack for bagging with sight glass cover for optimal safety during the cutting process easy Cleaning without having to move the machine current model of MHS for further information please refer to the MHS website 230 volts / 1.0 kW / 4.8 A Dimensions: H110 x W90 x D76 cm Weight: 200 kg mobile on 4 deflection rollers with 2 brakes Year of construction: 2011 Function tested, machine immediately ready for use! Condition, see original pictures! If you have any questions, email or call. Purchase price incl. current VAT. A proper invoice will be issued!

Bread slicer - Make: RÖSEN & ROBBEST - Model: SPA 38 (38 bread liner) - Condition: Used, fully restored - Warranty: 6 months

used Treif Falcon portion cutter incl. scale and the sorting station, year of construction 2006, portioning to exact weights, 360° scan for bone-in and boneless products, max. infeed length of 820 mm, depending on the product up to 240 portions per minute, the machine is equipped with a smooth curved blade for products without bones, bone-in version optionally available, products up to -3° C. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

: M3-M16 Weight: 27 kg working range: 200-1900 mm turning speeds: 300 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Creasing/scoring/cutting machine Schöber Model A80 Year 1996 Working width 800 mm feeder can be connected to any sheet feeder or used in-line, we can supply a feeder on request as wel as a delivery belt or jogger Available direct