fo used for sale

Combination Folding machine MBO K800.2 SKTL/4 AUT Navigator Falzmaschine / Combination Folding machine MBO K800.2-S-KTL-4 Navigator Baujahr / Year 2007 - Serial-No. 0124999 Rundstapelanleger / Round Pile Feeder Falztyp  4 Taschen - 2 Schwerter - 1 Seitentasche Folding Type 4 Buckles - 2 knives - 1 Side Buckle Schuppenauslahge mit Presswalzen / Stream delivery with integrated pressing MBO ASP 66 - 2 ME  Inklusive Kompressor / Include Compressor

Round Pile Buckle Folding machine Heidelberg Stahlfolder TD 66/6-4-4 Falzmaschine / Folding machine Heidelberg Stahlfolder TD 66/6-4-4 Baujahr / Year 1996 - Serial-No. 66748/95-225117 Rundstapelanleger / Round Pile Feeder  Arbeitsbreite / Working width max. 660mm Falztyp / Folding Type 6 - 4 - 4 Schuppenauslage / Stream delivery Inkl. Handbücher / Include Manuals

Vollautomatische Seitenschweißmaschine zur Verpackung von Produkten – unabhängig von ihrer Länge – mit Volleinschlag und ohne Folienüberlappung. Mit neuem Querstempel. Fully automatic side sealing machine for packaging products – regardless of their length – with full wrap and without film overlap. With new cross seal bar. Vollautomatische Seitenschweißmaschiene mit Einschweißtunnel - Fully-Automatic Side Sealer Kallfass Universa 400 - Mini 400 Year 2004 - Serial-No. M 05.04.226 Anlage bestehend aus / System consisting of: Handanlage / Hand fed Station MGZ 400 Seitenschweißmaschiene / Fully-Automatic Side Sealer Kallfass Universa 400 Einschweißtunnel / Shrink tunnel Kallfass Mini 400 Technische Daten / Technical Data: Länge Querstempel / Length of cross seal bar 450mm Verpackungsleistung [Takte/min] / Production speed max. up to 85 packs/min Produktlänge / P ...

Round Pile Folding Machine Stahl KC 78/4-KZ for 16 pages Cross Fold Falzmaschine / Folding Machine Stahl KC 78/4-KZ 16 Seiten Falzmaschine / 16 pages Cross Fold Year 1988 - Serial-No. 36526/88-148099 Arbeitsbreite max. 780mm / Working width max. 780mm Rundstapelanleger / Round Pile Feeder 1. Station 4 Taschen / 1. Folding Unit 4 Buckles 2. Station 3 Schwerter (links oder rechts Auslage) / 2. Folding Unit 3 knives (left or Right delivery) Schuppenauslage / Stream delivery Stahl SAK Inklusive Kompressor und Handbücher / Included Compressor and Manuals Vorgelagerte und nachgelagerte Messerwellen / Front mounted and rear mounted slitter shafts

Mobiles Schwertfalzwerk mit Eigensteuerung / Mobile Knife Folding Unit with SelfControl MBO Z2 Mobiles Schwertfalzwerk Eigensteuerung / Mobile Knife Folding Unit SelfControl MBO Z2 Year 1995 - Serial-No. 44951206-A Einlaufbreite / Infeed width min. 150mm - max. 480mm Einlauflänge / Infeed length min. 80mm - max. 320mm Einlaufhöhe / Infeed height min. 450mm - max. 650mm Geschwindigkeit / Speed min. 20m/min - max. 210m/min Produktivität / Productivity 15.000 cycles/h

Folding Machine Heidelberg Stahlfolder KD.2/78-4-KL Falzmaschine / Folding Machine Heidelberg Stahlfolder KD.2/78-4-KL Year 2001 - Serial-No. 703413/01-298045 Arbeitsbreite max. 780mm / Working width max. 780mm Rundstapelanleger / Round Pile Feeder 1. Station 4 Taschen / 1. Station 4 buckles 2. Station 2 Schwerter / 2. Station 2 knives Schuppenauslage / Stream Delivery SAK Rietschle Kompressor / Rietschle Compressor Inklusive Handbücher / Manuals included

Flat Pile Feeder Folding Machine Stahl KC 56/6-KTL for 16 pages Cross Fold and 6 buckles 2 knives with Side buckle Falzmaschine / Combination Folding Machine Stahl KC 56/6-KTL 16 Seiten Falzmaschine / 16 pages Cross Fold Year 1990 - Serial-No. 41655/90-169032 Arbeitsbreite max. 780mm / Working width max. 780mm Flachstapelanleger / Flat Pile Feeder 1. Station 6 Taschen / 1. Folding Unit 6 Buckles 2. Station 2 Schwerter mit Seitentasche / 2. Folding Unit 2 knives with Side Buckle Leimeinrichtung Planatol / Gluing unit Planatol Schuppenauslage / Stream delivery Stahl SAK Inklusive Kompressor und Handbücher / Included Compressor and Manuals

Heißfolienprägemaschine mit 25000kgs Druckleistung / Hot Foil Stamping machine with Pressure 25.000Kg Heißfolienprägemaschine / Hot Foil Stamping GEBA BAIER 49/25 Baujahr / Year 1972 - Serial-No. 72425 Druckleistung / Pressure max. 25.000Kg Prägefläche / Embossing size max. 300 x 430mm Höhenverstellung / Height adjustment ca. 190mm In einem guten Zustand / In good condition

Heißfolienprägemaschine in einem guten Zustand / Hot Foil Stamping Baier GEBA 1/F in good condition Heißfolienprägemaschine / Hot Foil Stamping Baier GEBA 1/F Serial-No. 26048 Druckleistung / Pressure max. 600Kg Prägefläche / Embossing size max. 180 x 220mm In einem guten Zustand / In good condition

Kompakter und wendiger Elektrostapler mit Ladegerät. Compact and maneuverable electric forklift with charger. Elektro Gabelstapler / Eletric Forklift Clark CTM 16 S Baujahr / Year 1998 - Serial-No. CTM145 2765 GEF 7096 3-Rad-Gabelstapler / 3-wheel Fork Lift Tragkraft / forklift lifting capacity max. 1600kg Hubhöhe / Lifting high max. 3300mm Lastschwerpunkt / center of gravity 500 mm Eigengewicht / Total weight 3138kgs Mit Ladegerät / with Charger

Schwerlaststapler von Svetruck in einem guten Zustand. Heavy duty forklift of Svetruck in good condition. Schwerlaststapler - Heavy duty forklift Svetruck 161238 Year 1995 - Serial-No. 5092172 Betriebsstunden 20.000Std. / Working hours 20.000h Gabellänge / Fork length 1800mm Hubhöhe / Lifting high max. 1800mm Mit Gabelverstellung / With fork adjustment Mit Seitenhub / With side lift 3 Schaltgänge vorwärts, 2 Schaltgänge rückwärts / 3 gears forward, 2 gears reverse Mit Partikel Filter zum Fahren im Innenbereich / With particle filter for indoor driving

Kompakte Tischfalzmaschine für Einfachfalz, Wickelfalz, Zickzackfalz, Doppelfalz. Compact tabletop folding machine for single fold, letter fold, Z-fold, and double fold. Falzmaschine / Folding Machine Multipli MB 35/2 Serial-No. 666119 Arbeitsbreite / Working width max 350mm Leistung / Output max. 220m/min Papiergewicht / Paper weight 40-200g/m2 2 Taschen / 2 Buckles Bandauslage / Stream Delivery

Faltschachtelklebemaschine / Folder Gluer Bernhardt FKB 700 Baujahr/ Year 2010 - Serial-No. 300310/86/FKB/700 Produktionsmöglichkeiten Längsnaht, 2 und 3-Punkt Grammatur 200 - 600 g/m2, E-Welle Materialien festes Papier ab 200 g/m2, Karton Plastik / Materials: strong paper from 200 g/m2, cardboard plastic Format offener Zuschnitt 500 x 700mm Luftanschluss benötigt / Air required min. 6bar Maschinengeschwindigkeit / Machine Speed max. 400 m/min. Die FKB 700 ist eine multifunktionale Faltklebemaschine für das Falten und Kleben von: Mappen, CD-Hüllen, DigiPacks und Faltschachteln. The FKB 700 is a multifunctional folding and gluing machine for folding and gluing: Folders, CD cases, DigiPacks and folding boxes.

Foil Stamping & Embossing Machine Kolbus PE 70 with automatic Feeder and Pre-stacking conveyor. Heißfolienpräge- & Prägemaschine / Foil Stamping & Embossing Machine Kolbus PE 70 Baujahr / Year 1979 - Serial-No. 178 Open cover size  min.170 x 100mm - max. 660 x 405mm Printing surface 420 x 355mm Pressing power 35 tons Geschwindigkeit / Speed max. 70 cycles/min. Vorstapel Föderband / Case Pre-stacking conveyor Anleger für Buchdecken / Feeder for cases Deckenausbiege Station / Case bending station Folientransportvorrichtung / Foil transporting device Folienabwickelvorrichtung / Foil unwinding device

Maschine zum Herstellen von Mappen, Mailings; Hüllen; Machine for producing folders, mailings, and sleeves; Mappen-Falt Klebemaschine / Folder Gluer FIDIA DORA 76 Baujahr / Year 2000 Flachstapelanleger / Flat Pile Feeder Format min. 150 x 240mm - max. 760 x 1000mm Heissleim Schmelzgerät / Hot-melt adhesive melter ROBATECH Concept 8

Universelle Faltschachtelklebemaschine / Universal Folder Gluing machine Faltschachtelklebemaschine /  Folder Gluing machine ROPI UKM 380 Baujahr / Year 2003  Format / Size min. 60 x 100mm - 500 x 420mm Geschwindigkeit / (Belt) Speed max. 5.000 cycles/h. Materialgewicht / Materials 150 - 450g/m2 Dispersionskaltleim / dispersion adhesive Saugbandanleger für Non-Stop Betrieb / Suction belt feeder for non-stop operation Maschinendimensions / Machine dimensions Machine L 550cm x W 80cm x H 88cm Maschinengewicht / Machine weight 650kg

Foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. The machine is equipped with 2 format sets: 200 and 250 gram, 100 x 55 x ± 40 mm and 100 x 75 x ± 35 mm, both bottom folded. The butter is feed with direct connection with compensator. Aluminium dosing station. Automatic greasing system. The machine is fully rebuild / reconditioned by Benhil - Germany in 2006 and has stainless steel and polycarbonate covers around the machine, with CE logo on the side., Excluding:, - Outfeed conveyor, Type of Machine: Butter packaging machine , Capacity: ± 1.000 Kg/h, Capacity (Units): up to 80 packages per minute, Packaging Weight: 200 and 250 gram, Brick size: 100 x 55 x ± 40 mm and 100 x 75 x ± 37 mm, Packaging type: Bottom folded, Year of refurbishing: 2006, Motor power: 3 kW, Weight: 2.160 kg

Sheet size (mm): max. 760 x 1270 Pockets: 4 Equipment / Additional information: With delivery Round pile feeder DESTA BAS/FSA 800

Folding machine Horizon 504 AKT 4 fold pockets + 1 bar

: neu : ca. 6 Monate ab Auftragse : Taiwan : 39000 € : 744.9 € : 2035 mm : 2.5 mm : Hydraulisch : 135 ° : 3000 mm : 1100 mm : 1750 mm : 2100 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules (sample photo) ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 8286 : prompt, Zwischenverkauf v : Türkei : 2990 € : 1 : 2040 mm : 0.8 mm : 70 ° : 2400 mm : 750 mm : 850 mm : 290 kg straight upper tool moveable manual cutting device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2010 : 080065 : prompt, Zwischenverkauf v : Deutschland : 29800 € : 1 : 2040 mm : 3 mm : 2 mm : 4.5 mm : Motorisch : 1.5 kW : 1.1 kW : 3060 mm : 1650 mm : 1500 mm : 2730 kg : 750 mm : 140 mm : 50 °/sek CNC control ECT (Schneider Magelis) - Input of bending angle, depth stop dimension, lifting height, folding, precut - max. 36 bending angles can be saved per set - max. 510 sets can be saved - comfortable 7.5", color touch TFT monitor - Power mode for material-friendly operation - Soft start of the bending beam and the depth stop - Visual user guidance in the event of faults (diagnosis center) - Selection of different languages such as German, English ... CNC back gauge - Back gauge range 6 - 750 mm - Drive via belt - 6 stop fingers - support plates with brushes Sectioned goose neck rail height 75 mm Additional 10 mm rail on the bening beam Flat rail R 1 mm Flat rail R ...

: gebraucht : 080212 : prompt, Zwischenverkauf v : Deutschland : 1 : 6020 mm : 1.25 mm : 1.5 mm : 1.25 mm : 5 : 5 : 1015 mm : 835 mm : 2.2 kW : 7240 mm : 1240 mm : 1950 mm : 2300 kg OVERHAULED BY THE MANUFACTURER IN 2026 / MACHINE BODY MANUFACTURED IN 1989 Electric cutting unit Angle preselection via rotary knob Infinitely adjustable upper jaw opening height Foot pedal Two-person operation via second foot pedal Operating instructions in German including CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. •HONEST INSIGHTS: Detailed photos and functional videos of the current condition •LIVE ON-SITE CHECK:Live testing is possible at our facility •DIGITAL DEMONSTRATION:Individual live demonstration via video call •RISK-FREE PURCHASE:14-day return policy Details:https://www.hesse-m ...

pressure: 4000 t stroke: 380 mm dayligth: 1050 mm distance between columns: 1580 mm table-size: 1520 x 1600 mm dimension of ram: 1470 x 1500 mm ram adjustment: 15 mm strokes of ram per min.: 50 ejector path: 31 / 70 mm main drive: 200 kW height over floor: 7520 mm total power requirement: ca. 250 kW weight of the machine ca.: 245 t dimensions of the machine ca.: 4,4 x 4,6 x 7,5 m complete forging line includes an - Smeral Hot Forging Press - induction heater - Manyo 460-millimeter forging roll - manipulator with forging roll link - SMERAL 500-ton trimming press The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines, fork set -Forklift tines: Type K1790 EA 001 2 pieces/1 pair -Length: 1200 mm -Cross-section: 80 x 40 mm -Photograph: 410 mm (see photos) -Transport dimensions: 1345/590/H110 mm -Weight: 80 kg

We offer new Peri Trio articulated corners TGE 3.30m with 50% discount Special net price with 50% discount = 1.129,50€/piece Original price: 2.259,00€/piece If you have any questions, please call 0049 176 70044689 Mr. Becker Offer only valid while stocks last. Subject to prior sale. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Ulmer Str. 1 89614 Öpfingen Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055

Steam hardening plant, Fabr. Kraft Energy - Type Generator K15/1SHP = Power 450 Kw for heating formwork = with the heating system it is possible to occupy formwork 3 times a day! - 8 separately controllable hardening zones - Automatic temperature control - Versatile use, e.g. for truss and rod part shapes, segment production, wind turbine tower segments as well as pipe & tank manufacturing

Alimenta Newpack Division Thermoform FM100/E-20 HC form fill seal machine (FFS) for mini-portions of jam with fruit parts / marmelade / honey / choco paste., Mini-portions are the ideal, hygienic way to package portions for use in hotels, aboard airplanes, for catering and for single-person households without compromising on quality and freshness. Less packaging material needed thanks to the use of forming material of minimal thickness, even heating up of the material and accelerated forming process for an optimally controlled and optimally distributed wall thickness, minimal punch waste from the low-waste punch unit, volume-saving, overlapping packing configuration when final packaging into boxes or tray., Working principle: cup material supply from the reel, pre-heating the cup material, forming the cup, date coding inside the bottom of the cup, filling the cup (fruit parts possible, C ...

- Flat pile feeder - Tremat - 1. Station with 6 buckles - 2. Station with 4 buckles - Stream delivery SKP-66, 2008

Second-hand Weinig Profimat 23 E automatic planing and moulding machine for four-sided planing and profiling of timber, with a long dressing table. Technical data: Spindle 1: Bottom / 4 kW / 40 mm Spindle 2: Right / 40 mm Spindle 3: Left / shared motor with #2 / 40 mm Spindle 4: Top / 5.5 kW / 40 mm Spindle 5: Bottom / 4 kW / 40 mm Spindles: 5 Working width: 230 mm Working height: 120 mm Feed: 2.2 kW Planing table length: 2,500 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

working width: 180 mm; working height: 120 mm; working spindles: 4; spindle following: down, right, left, up; motor power spindle down: 3,7 kW; motor power spindle right: 3,7 kW; motor power spindle left: 3,7 kW; motor power spindle up: 5,5 kW; adjustment spindle down: -; adjustment spindle right: -; adjustment spindle left: manual; adjustment spindle up: electric; cutter heads: turn cutter; feed speed: 2; feed pressure: feather; current consumption: 38 A; motor brake: automatisch; suction connection: machine length: machine width: weight:

- Complete installation for the preparation and recovery of sand for foundry. - It consists of: - Various feeding and return conveyor belts. - Polygonal sieve. - FELEMAMG SF-RCP permanent magnet magnetic separator. - Bucket elevator, capacity approximately 200,000 kg/hour. - 3 silos for return sand storage, diameter 4000 mm, approximate capacity of each silo 65 m³. - 4 silos for additives with a diameter of 2000 mm, approximate output 8 m³/hour. - Lung hopper. - 3 material reception silos (coal, bentonite and new sand), diameter 3000 mm, capacity approximately 42 m³ each. - DISA SAM 16-180S mixing mill: year of manufacture 2005, serial number 16.180.18.019, load capacity 5,000 kg, cycle 180 sec. - Fine aspiration. - The sand cooler that appears in a photograph IS NOT included. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnect ...

Description Item # 9392 - CHOCOLATE FOIL WRAPPER, for solid chocolate eggs & balls Manufactured by OTTO HANSEL Model X8005 Year 1973 Machine has had a complete electrical revamp in Year 2007, along with the Pulling & Centering devices for the Aluminium foil. Currently set up for eggs approx. 29mms long x 19mms diameter, about 7grammes in weight.

Reference ID: PP-60788 Category: Flatbed Die Cutter Manufacturer: Bobst Model: SP 142 CER II Year: 2000 Working Hours: 22900 Speed: 8500 sheets/h Max. Size: 1420 x1020 mm Min. size: 700 x 500 mm Condition: Good Location: Europe Availability: Immediately Description: Max. cutting pressure: 550 tons Suitable for paper, solid board and corrugated board Special corrugated board device Pallet feeder with automatic non-stop system by grill Operator side lay with electronically controlled movable stop Opposite side pushing lay BOBST Centerline system Micrometric adjustment system Chase loader 2 cutting chases Bernoulli device Stripping station Quick-lock stripping system Blanking station Quick-lock blanking system Non-stop delivery Automatic pallet changing system Pre-makeready table

Second-hand automatic planing and grooving machine, part of a Weinig Hydromat 2000 pre-planing line, with feed mechanism (tilting destacking). The machine has already been dismantled and is ready for loading. The images contain AI-generated sample images for illustrative purposes. The illustration may contain errors. Technical data: Spindles: 5 Spindle 1: Bottom / 11 kW / 50 mm / 6,000 rpm Spindle 2: Left / 11 kW / 50 mm / 6,000 rpm / Jointer Spindle 3: Top / 18.5 kW / 50 mm / 6,000 rpm / Jointer Spindle 4: Bottom / 11 kW / 50 mm / 6,000 rpm / Jointer Spindle 5: Right / 11 kW / 50 mm / 6,000 rpm Working width: 175 mm Working height: 80 mm Feed: 15 kW / 100 m/min Control: CNC memory system Max. workpiece length: ~ 6,000 mm Condition: Gebraucht Location: Prag, Tschechien

Fully automatic stretch film packaging machine with weigher & labeler Packing Plant / Wrapper + Labeler Fabbri Group ELIXA 35 / Libra-B.285.ESP Among the automatic Elixa stretch wrapping machines, the Elixa 35 is the most powerful model in terms of speed (35 ppm). Like all the machines in the range, the Elixa 35 is a compact stretch wrapping machine designed by the Fabbri Group specifically for particularly small workspaces and retail stores. Elixa 35 can package any food compatible with stretch film and technology. It uses neutral or printed films with continuous printing, which offers more possibilities for communication and branding on the package. It delivers the best results when combined with Fabbri Group stretch films, but also offers excellent performance with food films from all major manufacturers on the market, achieving an unparalleled packaging aesthetic.  ...

Number of spindles: 9 St. Working width: 240 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 7,5 kW Working speed: 6-36 m/min weight of the machine ca.: 6500 kg Control: CONTROL 100 PC PLUS SCM Topset XL, Year of Manufacture 2015, currently undergoing partial recondtionning in stock ------------------------------------------------------------ Summary: - 9 spindles (including 4 x HSK 85 S) - Electronic horizontal and vertical positioning - 8,300 rpm - SCM Set-up - SCM T-Set - Includes workpiece infeed magazine Working dimensions: - Maximum working width: 240 mm - Minimum working width: 25 mm (reducible to 15 mm via installed special kit) - Maximum working height: 120 mm - Minimum working height: 10 mm (reducible to 6 mm via installed special kit) Special working cross-section equipment: Equipped with a special kit for extremely small minimum cutting dimensions o ...

Number of spindles: 6 St. Working width: 230 mm Working height: 150 mm Length of the planing table: 2000 mm Feed motor: 5,5 kW Feed speed: 7-36 m/min. Kuper SWT 23 XL-6 Four-Sided Planer ----------------------------------------------- Machine fully functional tested! ... Working width min/max: 18 - 230 mm Working height min/max: 8 - 150 mm Spindle configuration: 1st Spindle - bottom ----------------------------------------------- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Pulley diameter: 160 mm Adjustment: axial and radial, manual 2nd Spindle - right ------------------ Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 160 mm Pulley diameter: min. 110 mm - max. 200 mm Adjustment: axial and radial, manual, via mechanical digital display Adjustment: vertical 35 mm below Table 3rd Spindle - Left -------------- ...

Number of spindles: 8 St. Working width: 230 mm Working height: 120 mm Weinig Planing and moulding line ------------------------------- Consisting of the following individual machines: Item 1: Weinig Profimat 23 E, four-side planer, stock number: 2803 5 spindles + glazing bead saw Item 2: Weinig Uniplan 23, stock number: 2804 Fine and hydroplaner with 2 horizontal spindles Item 3: Weinig RF 15, stock number: 2805 Longitudinal-cross-longitudinal conveyor with workpiece return to the operator Detailed descriptions of the machines can be found under the mentioned stock numbers. (Technical specifications according to the manufacturer, without guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2020 mm plate thickness: 3.0 mm thickness at Niro-steel: 2.0 mm bending angle max.: 135 ° stroke of upper beam: 250 mm Swing beam adjustment: 80.0 mm Control: POS 2000 back stop - adjustable: ca. 1.000 mm total power requirement: 6.0 kW weight of the machine ca.: 3775 kg dimensions of the machine ca.: 3850 x 2250 x 2250 mm Original price at the time: approx. 70.000 Machine from a maintenance workshop Special price upon request (!) Features: - Robust, electric-motor-driven CNC swivel bending machine - dynamic, high-performance drive motors - SCHRáDER POS 200 CNC control unit touchscreen control panel fast programming of individual parts programming of bending sequences Tool and bending program library Graphical and numerical display - Swiveling control panel, front right - CNC electric-motor-driven material/backgauge With rear sheet metal support surface (stainles ...

Key data: 3100 mm, 1 mm

used Schechtl swivel bending machine, with hand roller shears, foot pedal, Sheet metal support rack, attachment rail 10 + 20mm, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Working length 3100 mm Blechstärke Stahl/sheet thickness steel 1.0 mm Blechdicke Alu/sheet thickness Aluminium 1.5 mm Blechdicke VA/sheet thickness Stainless 0.6 mm Backgauge (max.)/Backgage without Farbe/Colour grau/blau Space requirement approx. 3850 x 900 mm Machine Weight: 1300 kg Oberbolenhub/upper beam stroke 130 mm Roller shear/roller shear yes Öffnungsweite/opening width 130 mm Bending angle (max.)/bending angle 160 degrees Underbeam adjustment yes Back gauge (min,) no Machine number HB26495

Key data: 3240 mm, 2 mm

used Fasti Motor Folding Machine, For sale on behalf of customers. Please discuss the final price and exact equipment with Mr. Jevsek 0163-7269528 Working length 3240 mm Blechdicke Stahl/sheet thickness steel 2,0 mm Blechdicke Alu/sheet thickness Aluminium 4.0 mm Blechdicke VA/sheet thickness Stainless 1.5 mm Backgauge (max.)/Backgage manual max. 600 mm Farbe/Colour grün Total power requirement/electric power 16 A Raumbedarf/Space requirement 4650 x 1200 x 1500 mm Maschinengewicht/Weight 3950 kg Engine power 2.2 kW upper beam stroke 350 mm Roller shear/roller shear without Bending angle (max)/bending angle 145 degrees Machine number 92215013

Key data: 6020 mm, 1 mm

Used hydr. Jorns bending machine, hydr. Roller shears, emergency stop rail, Control 9-bend angle, foot switch, slide-back sheet metal supports Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 6020 mm Blechdicke Stahl/sheet thickness steel 1,25 mm Blechdicke Alu/sheet thickness Aluminium 2.00 mm Blechdicke VA/sheet thickness Stainless 0.80 mm Backgauge (max.)/Backgage without Auslauf/throat depth 1000 mm Farbe/Colour blau Maschinennummer/machine number 9453-04 Total power requirement/electric power 16 A Space requirement approx. 6800 x 1650 mm Einlegetiefe/insert depth 1000 mm Maschinengewicht/Weight 3200 kg Oberbolenhub/upper beam stroke 200 mm Roller shear/roller shear yes Number of columns: 5 pieces Öffnungsweite/opening width 200 mm Bending angle (max)/bending angle 140 degrees

Format : 73 x 104 cm (29”x 41”) Spiess feeder with pre-marge Front and side detection cells PC Control panel 3 x advances 2 x honeycombs straightened 2 x new honeycomb frames 2 x new heating units Air-conditioned electronic cabinet

Colines CAST-3 LAYER – Three-layer CPP cast-film extrusion line Year: 1997 3-layer CPP cast film, A-B-C configuration Max. film width: 2,100 mm; film thickness: 20–160 μm Previously mainly processing 20–70 μm film Output: approx. 420–450 kg/h, depending on film width and thickness Extruder screw diameters: 130 / 80 / 80 mm Equipment: Gravimetric dosing and Seltek thickness measurement Renewed Uzman corona treatment; automatic web-edge control Turret winder for roll diameters up to 800 mm Renewed ABB AC drives and automation Edge-trim shredding and recycling Roll changing is not automatic. Reference: PP-45243 Further information on request.

Jagenberg Diana 105-2 – Folder gluer Year: 1991 Equipment: Straight-line folding and gluing Crash-lock bottom HHS gluing system with 2 applicator heads and glue wheel Reference: PP-59866 Further information on request.

sheet width: 1020 mm plate thickness: 2,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: ca. 0,500 t dimensions of the machine ca.: m Motorized upper beam adjustment via foot switch Bending beam in top condition, free of nicks or dents The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1640 mm plate thickness: 3,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 1,60 t dimensions of the machine ca.: m Manual and automatic bending cycles possible Bending angle adjustable via potentiometer Clamping beam lift and material thickness selectable via switches Manual backgauge with spring fingers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bobst Domino 90 Matic – Folder gluer Year: 1987 Max. format: 800 × 900 mm Material weight: up to 600 g/m² Equipment: Straight-line and crash-lock bottom Left-hand lower disc gluing unit Renewed HHS cold-glue system with applicator heads Bobst Easyfeeder 90 Belts replaced in 2025 Reference: PP-53236 Further information on request.