fm used for sale

Horizontal batch mixer with 630 l. gross content, pneumatic outlet flap (new cylinder), 37 kW engine, Flender gearbox (N2 = 58.58 UPM) and carbide-armoured mixing tools. Workshop overhauled in 2016; very good condition.

CHP Schmitt enertec V12 Hi here sell a Schmitt enertec BHKW that is immediately ready for use and can also be tested prior to sale. Transport or construction is also possible. Electrical power: 300 kw with internal charge air cooler circuit 370 kw at external charging air cooler circuit Thermal power: 408 kw to 300 kw el. Required fuel: Bio-gas gas Sewage gas Landfill gas Special: Compact design in soundproofing hood with supply and exhaust air installed motor control cabinet to the frame: Engine one E2842 Leroy Somer operating hours: ca 100 Description: The CHP has been completely dismantled and rebuilt, which means the motor and generator have been overhauled. Control: PPU is by Deif SPS is by Telemecanique If you need replacement parts or have questions I am under to you provided: With friendly regards Andreas Peters Andreas Peters CHP GmbH & Co.KG Repairs of engines ...

FMS SYSTEM; Machining Cell consisting of: Two 5-Axis Machining Centres 12-Pool Pallet System (630 mm X 630 mm); Pallet Storage System X= 750 mm, Y= 860 mm, Z= 850mm; B= 0,001°; 334 Pos. ATC Spindle Taper HSK-A100; Spindle n= 11.000; Spindle 25 kW; Feeds 32.000mm/min; Chip-conveyor; Coolant System Serial No. 1283-01 (2001) Siemens 840D; and Coolant System Serial No. 1024-98 (1999) Siemens 840C FR: À VENDRE MAINTENANTFMS SYSTEME ; 12 Pos. Piscine à palettes (630 X 630mm) ; 2x horloge MCM 5 axes CENTRE D'USINAGE/BEARBEITUNGSZENTREN/MACHINE CENTERS ; X= 750, Y= 860, Z= 850.mm ; A= .. ? ? B= 0,001° ; 334 Pos. ATC ; cône de broche HSK-A100 ; broche n= 11.000 ; broche 25 kW ; avance 32.000mm/min ; convoyeur à copeaux ; système de refroidissement n° 1283-01 (2001)Siemens 840D ; et système de refroidissement n° 1024-98 (1999)Siemens 840C

Table size: 500 x 1200 mm traverse path x: 1000 mm stroke y: 550 mm traverse path z: 600 mm spindle retainer: ISO 40 spindle speeds: 60-2700 rpm spindle drive: 10 kW Electr. Supply: 380 V, 20 kVA kW space: 3200 x 2800 x 2650 mm weight: 7.3 t

According to the description below

Punching machine Trumpf TruMatic TC3000-1300 FMC Year of construction 2004 87500 hours (03.2021) In this case, the configuration : TruMatic TC3000-1300 FMC Year of construction 2004 Working range : 2550 x 1280 mm Standard: • Sturdy C-frame • Coordinate guidance with integrated linear magazine, 21 seats for tools and clamps • 2 clamps • Drives: Maintenance-free digital three-phase servo motors • Punching head: hydraulic system with closed control loop, hydraulic mono tool holder, 360° rotation for all Tools, automatic tool length compensation, programmable scraper movement • Programmable hold-down • Tool spray lubrication • Punch butt suction • Partial slide 500 x 500 mm • Control Bosch PNC-P, activity-oriented user interface, Online Help, Diagnostics, 3.5" Floppy Drive, RJ45 Network Connection • Graphics programming ToPs 2000 • ToP ...

LHS Lagertechnik, supplier of new and used storage technology. We provide you with racking systems, industrial trucks, accessories and other warehouse inventory. In this ad, you will buy as follows: - 1 piece reach truck type FM 20 / parts carrier - Ready to drive with all controls, joystick, display, etc. - Sale WITHOUT BATTERY - Device runs smoothly (drive and steering motor o.k.) - Operating hours: approx. 17,500 H - Year of construction: 12/2006 - Serial number: 611881000650 - Drive: Electric Self-collectors welcome – free loading – shipping can be organized nationwide with low-loader and ground-level unloading – please inquire about your transport costs. Sale of used goods without guarantee and warranty – errors and prior sale of used goods expressly reserved.

Fully reconditioned can filling machine for soft drinks and beer. Machine housing sandblasted and repainted. All seals and parts subject to wear new. Pneumatics and Electronics new (Siemens S7) Canned format: according to customer wishes upto o, 5 l

automatic meat ball and fishball forming machine, beef balls, pork balls, fish balls, squid balls, 400-600kgs hour, 18-35mm diameter, stainless mobile frame, 3Ph

FMB JUPITER band saw was manufactured in 2000 in Italy by FMB s.r.l.. The machine, designed for precision cutting of workpieces, is an indispensable tool in any production facility. The machining process is performed fully automatically by means of a high quality 3180 mm long saw blade, which is driven by a powerful electric motor with an stepless gearbox and transmission wheel. The robust design also eliminates any vibration generated during machining, guaranteeing exceptional stability, even during the most intensive production work. In 2024, the FMB automatic band saw underwent an upgrade, during which the control panel was replaced with a new one. The FMB JUPITER bandsaw weighs 1150 kg. Technical data of the FMB JUPITER metal band saw - cutting angle: 0°-60° - cutting capacity (0⁰, circle): 240 mm - cutting capacity (0⁰, square): 240x240 mm - cutting capacity (0⁰, rect ...

Country of origin: Germany, L max mm: 3.2, Operating hours: 0

EDGE SANDING machine for PANEL and PROFILES type FMB 2 I composition : 1° belt : tilting variable speed sander (with Inverter) - motor power Hp 2 2° belt : tilting variable speed sander (with Inverter) - motor power Hp 2 Blowers for belt cleaning Carpet speed variator from 5 to 25 mt / min Upper adjustable presser with rubber wheels Lateral support for wide panels volt. 380/50

PVC Compounding Plant, Hot/Cooling Mixer A hot/cooling mixing system including accessories must be handed in. The control system (PLC) is outdated and needs to be reinstalled. The system is still installed and must be handed in from the site. Hot mixer: Henschel Fluidizing Mixer FM 1500 A Engine power: 180/280 kW, 2-speed 750/1500 rpm Külmischer: Henschel Cooling Mixer KMH 4500 Double jacket, 6 mixing tools, 77 rpm Motor power 55 kW Accessories: - Liquid scale 25 kg - Liquid scale 250 kg - Weighing container for powdered media 650 kg - Conveyor belt for bag addition - Feeding station for big bag with discharge aid and rotary valve (Not shown on P&I) - Weighing container for plastic recyclate 600 kg - Transmitter and buffer tank for discharge from cooling mixer - Kaeser EB 420 C suction blower - Suction blower (blue)

FMC Vibratory conveyor Model: VF10 Serial: 1540 Stainless vibratory conveyor, variable speed, internal dimensions 1800mm x 1100mm, discharge height 1000mm,

The capsule filling machines SPT-FM150 are for the fully automatic filling of hard gelatin capsules Large #00 - #4, (optionally 000, 5) with powder, granules or pellets in the pharmaceutical and dietary supplement sector Designed. The dosing is carried out via a dosing disc, which ensures a high accuracy of the filling quantity. The new SPT series of fully automatic capsule filling machines enable: Nf7iv Capsule size of #000 - 5 Encapsulation of powders, granules and pellets possible Faster and easy format change without additional tools Touch Screen User-friendliness via HMI (Human Interface) According to GMP guidelines CE-certified 2-year warranty Installation and repair service from Germany Number of segements 20 Max power caps/h 150,000 Capsule size #00,1,2,3,4 (optional #000.5) Max rotation speed 130 rpm Speed control inverter Machine dimensions 1 750 x 1 750 x 2 ...

We have for sale little used Hunan Fumach Twin screw extruder. This extruder has undergone a complete overhaul where all electrical wiring has been refurbished, ABB motors, Siemens logic, etc. The modification work has been done in Finland and the modifications have been given the CE mark. The extruder meets all the directives required by the EU Twin-screw Extruder FMHE72 which can be used for processing cereals, snack food, Nutrition, rice protein, reengineering, Starch gelatinization, caramel, rice products, pet food, Aquatic product feed, etc. Manufacturer: Hunan Fumach Foodstuff Engineering & tech. co. Ltd Type: FMHE-72-24 Year: 2017 Production capacity: 300-1200 kg/h Screw type: Twin screw, diameter 72 mm Screw length diameter ratio: 24D Screw rotation speed: 50—500r/min Screw torque: 2100N.M Oil pump motor: 1.1 kw Barrel temperature: -20-300℃ Die temperatu ...

X-axis: 4500 mm Y-axis: 2500 mm Z-axis: 1000 mm Year: 1986 Voltage: 380 V Power: 80 kW Weight: 63000 kg Size: 9500x9800x6100(h) mm

Janssen Moulding Roller for FM128 K4 pastry forming machines Diameter: 23,9cm

Janssen Pastry Moulding Machine Type: FM128 K4 with 1x speculoos roller Extra rollers available at extra cost Band width: 23.5cm with heating Height: 145cm Width: 80cm Depth: 50cm

USED FMC FOODTECH A144 AUTOCLAVE REF#: C6849 Sterilizer A144 manufactured by FMC FOODTECH General characteristics: Maker FMC FOODTECH Model A144 Year of manufacture 2006 Weight 2240 kg Maximum working pressure 4 bar Test pressure 5.72 bar Pressure safety valve 4 bar Maximum working temperature 205 ºC Steam conditions min. 6 bar / max. 7.5 bar Air conditions min. 5.5 bar / max. 6.5 bar Cooling water conditions min. 3 bar / max. 5 bar Capacity 6820 L Engine features: Tension 380 V Power 10 kW Frequency 50 Hz - 3P

Model SC-120 Corn cutter provides maximum product recovery, high throughput, low maintenance and automatic corn removal from the cob at high speed. Each ear is placed on the feed through chain, tip end first. The stainless chain moves the ear of corn into the feed rolls. Two sets of feed rolls line the ear of corn up with the cutter head and move the earinto the cutter knives. The cutter knives are automatically openend for cutting by the feed roll gauging sytem. Kernels fall through the head and is discharged to a takeaway conveyor. A water spray is directed into the cuto-off corn area to minimize the starch build up.

I sell a drill with cutting units COMEC FM0V8 2000, built in 1997. Working width max. 2000mm Configuration: 0 motors from below 1+1 motors from sides / angular adjustable 2 motors from behind / head angular adjustable 3 motors from above / head angular adjustable 4 pieces of material prints from above 2 cut saws from above / head angular adjustable Atypical 5-spindle drill heads Including 3 x 15mm / 2 x 25mm. Dubel heads in the price. Very good addition. Available the same.

Auger

Metal detector defective

FMB ORION WITH LEFT AND RIGHT CUTTING ANGLE INCLUDING USER MANUAL AND SPARE PART DOCUMENTS MOVING VICE FROM LEFT TO RIGHT CUTTING CAPACITY LOOK ON PHOTOS ROUND: 240 SQUARE : 240X240 CUTTING ANGLE 1. - 45. 2. 0 ...TO60 FOR CUSTOMER WE WILL CLEAN AND PREPARE MACHINE FOR SHIPPING. AS WELL WE CAN OFFER TRANSPORT FOR OUR CUSTOMER

WE OFFER AN EXCELLENT CONDITION FULLY AUTOMATIC BANDSAW INCLUDIN DOCUMENTATION FOR CUSTOMER WE CAN ORGANIZE TRANSPORT AS WELL WE CAN ORDER FOR CUSTOMER RESERVE BLADES.

bar material dia.: 65 mm bar length: 3000 mm voltage: 400 V weight of the machine ca.: 1,2 t dimensions of the machine ca.: 5,32 x 0,95 x 1,52 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer Welding machine - Hood shrinker Torre Minipack FM 76 Digit The machine is sold due to a business change at our customer's premises. It is operational and has been little used and put into storage in 2020. The Torre Minipack FM 76 Digit Welding and Shrinking Machine Welding and Shrinking Machine - Hood Shrinker is a compact welding and shrinking machine for very good packaging performance, It is quick to work and easy to use. Particularly suitable for small and medium quantities of up to 300 pieces of film packaging per hour. Not all information and data are available yet. These will be added soon. Technical data (partly from the network) Manufacturer: MINIPACK -TORRE S.p.A Type: FM76A DIGIT No. 003001 Year built:2002 Operating hours: little Packaging capacity: 300 pieces of film packaging per hour. Welding frame dimensions: 52 x 38 cm max product height: 26 ...

Profile Machining Center Machining length approx. 8,500 mm, max. profile size 300 x 200 mm, Travel XYZ = 9,300 x 1,000 x 800 mm, Sawing unit (mitre cuts), 4-axis drilling/milling unit (16 kW, 18,000 rpm), tool changer 24-fold option pendulum operation, option Clamping element displacement, preparation Flowdrill, , safety enclosure, BECKHOFF control panel (programming software CamQuix), refrigeration unit IDEA 16CCM-50-A-F-3 (No. C2019010009, year of construction 2019), Control cabinet, machine under power in production use Original price 176.500 EUR

1 TRÜTZSCHLER opening line year 1999 composed of: conveyor feed with 500 cm length and 120 cm width, 1 TRÜTZSCHLER type BOWA with weigth pan, 2 TRÜTZSCHLER weighing feeder type PWSE 1200, 1 TRÜTZSCHLER Tuftmixer type FMN, 1 TRÜTZSCHLER fine opener Tuftomat type TFV1 1 TRÜTZSCHLER opening line year 1999 composed of: conveyor feed with 500 cm length and 120 cm width, 1 TRÜTZSCHLER bale opener type BO 1200, year 1999, 1 TRÜTZSCHLER fine opener Tuftomat type TFV1, year 1999 3 TRÜTZSCHLER material reserve with trunk and condensor type MS, year 1999 1 TRÜTZSCHLER fine opener with feed trunk and condensor type FD-S, year 2004

Harvester, wood harvester, forest harvester, crane harvester used Manufacturer: FMG Type: 1870 SUPER MASTER Year: 1998 Operating hours approx. 7500 Engine: Volvo Diesel 220 hp Boom: Logolift 200 V 9 m Head: TIMBERJACK 762B Machine drives but we can't test all functions. Repairs to the cutting head may be necessary. Control would have to be reviewed. Dimensions approx. 11 x 3 x 3.7 m

Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Power: 1.5 Nm -Speed: 0-500 rpm -Shaft: Ø 19 x 30 mm -Construction: B5 -Dimensions: 230/230/H200 mm -Weight: 10.5 kg

Radial fan, chip extraction blower, fan, extraction, chip blower -Motor power: 15 kW -Inlet connection: Ø 350 mm -Outlet connection: Ø 250 mm -Dimensions: 1050/1060/H1240 mm -Weight: 276 kg

Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 18.5 kW -Speed: - rpm -Volume flow rate: approx. 7000 m³/h -Total pressure: approx. 2800 Pa -Inlet connection: Ø 280 mm -Outlet connection: Ø 350 mm -Dimensions: 1120/840/H930 mm -Weight: 284 kg

An inspection system for bottle label inspection is offered, Throughput capacity 15,000 bph With 3 cameras and control

Biscuit forming machine Biscuit machine Janssen FM126M8 - Pastry forming machine - Manufacturer: Janssen - Model: FM 126 M8 - 380 volts

Key data: 2000 KW, 2500 kVA, 400 V

Emergency power system in containers Manufacturer: fmf group Type FPE 2500 MC Power: 2'000kW / 400/230V / 50Hz Control: ComAp InteliGen 500 Engine: - Manufacturer: Perkins - Type: 4016-61TRG3 with stem radiator - Speed: 1,500 min-1 Generator: - Manufacturer: Mecc Alte - Type: ECO46-1.5L4 Container: - 40-foot ISO container - Dimensions: 12'192x2'438x2'896mm - Insulation: thickness 50mm

Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: approx. 22 kW -Speed: not visible -Volume flow: not visible -Inlet connection: Ø 280 mm -Outlet connection: Ø 450 mm -Dimensions: 1050/900/H920 mm -Weight: 280 kg

Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump -Drive: 4 kW 960 rpm -Max. Delivery rate: 2.58 m³/h -Max. Pressure: 3 bar -Max. Temperature: °C -Dimensions: 730/350/H310 mm -Weight: 88 kg

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tie rod cylinder -Manufacturer: FMA Pokorny, hydraulic cylinder tie rod cylinder stroke 50 mm -Type: 50030-00-5 -Piston rod: Ø 16 mm -Dimensions: Ø 65 x 340 mm -Weight: 5.6 kg

Reinforcing steel shear, reinforcing steel cutting machine, construction steel shear, profile shear, punch, punching machine -Manufacturer: L & L, steel shear with chassis -Type: FM1001 -Drive: 1.5 kW motor -Cutting width: 20 mm -Cutting height: 100 mm -Dimensions: 1160/500/H765 mm -Weight: 334 kg

Spectrometer SPECTROBLUE FMX36 of the company AMETEK Find more here - /

Used rotary bottle rinsing machine from Italian company Poggio, model FM24. New 2007.

Key data: 160 mm, 2 kW, 1770 m³/h

mobile chip extraction system AL-KO FMRG 1/160 Manufacturer Part Number: 4172370/2

Foil Sealing Machine Packaging Minipack Torre FM75 - Foil shrink-wrapping machine - Manufacturer: Minipack Torre - Model: FM-75 - 220 volts - 50 Hz - Mobile on castors