flow pack used for sale

Flowwrap machine - new design - for very economic high speed OPP film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, large products. Film feed from the top. Infeed table with automatic transport through pushers into the machine. Special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. Automatic folding and sealing. Print mark sensor included. PID temperature control. Machine stopping in selected position to avoid film sticking to the knife. Optional: gas flushing device. - Technical specifications: max. film width: 600mm | 1 pendular knife | 220V, 3.6kW | no compressed air required | max. speed of the machine in neutral: 40 cycles/min | max. bag (not product) dimensions (mm): L(120-450)xW(50-200)xH(10-110) | machine dimensions (mm): L4380xW970xH1500 | weight (net/gros ...

Flowwrap machine - new design - for very economic high speed OPP film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, medium/larger products. Film feed from the top. Infeed table with automatic transport through pushers into the machine. Special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. Automatic folding and sealing. Print mark sensor included. PID temperature control. Machine stopping in selected position to avoid film sticking to the knife. Optional: gas flushing device. - Technical specifications: max. film width: 450mm | 1 pendular knife | 220V, 3.2kW | no compressed air required | max. speed of the machine in neutral: 80 cycles/min | max. bag (not product): dimensions (mm): L(120-450)xW(50-160)xH(10-80) | machine dimensions (mm): L4380xW870xH1500 | weight ( ...

Flowwrap machine for very economic high speed OPP film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, medium/larger products. Film feed from the top. Infeed table with automatic transport through pushers into the machine. Special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. Automatic folding and sealing. Print mark sensor included. PID temperature control. Machine stopping in selected position to avoid film sticking to the knife. Optional: gas flushing device. - Technical specifications: max. film width: 350mm | 1 pendular knife | 220V, 2.4kW | no compressed air required | max. speed of the machine in neutral: 120 cycles/min | max. bag (not product) dimensions (mm): L(110-330)xW(30-130)xH(10-60) | machine dimensions (mm): L3670xW820xH1410 | weight (net/gross): 800 ...

Flowwrap machine for very economic high speed OPP film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, small products. Infeed table with automatic transport through pushers into the machine. Film supply from the bottom for product with low stability, with humidity or some stickiness (to be tested/confirmed). Automatic folding and sealing. Print mark sensor included. PID temperature control. Machine stopping in selected position to avoid film sticking to the knife. Optional: gas flushing device. - Technical specifications: max. film width: 250mm | 2 rotating knives | 220V, 2.4kW | no compressed air required | max. speed of the machine in neutral: 230 cycles/min | max. bag (not product) dimensions (mm): L((65-190)OR(120-280))xW(30-110)xH(0-40) | machine dimensions (mm): L3920xW670xH1320 | weight (net/gross): 700/750kg. The machine has to operate with min ...

Flowwrap machine for very economic high speed OPP film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, medium/larger products. Infeed table with automatic transport through pushers into the machine. Special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. Film supply from the top. Automatic folding and sealing. Print mark sensor included. PID temperature control. Machine stopping in selected position to avoid film sticking to the knife. Optional: gas flushing device. - Technical specifications: max. film width: 400mm | 1 rotating knife | 220V, 2.8kW | no compressed air required | max. speed of the machine in neutral: 150 cycles/min | max. bag (not product) dimensions (mm): L(150-400)xW(50-180)xH(0-65) | machine dimensions (mm): L4020xW800xH1450 | weight (net/gross): 90 ...

Flowwrap machine for very economic high speed OPP film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, medium/larger products. Infeed table with automatic transport through pushers into the machine. Special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. Film supply from the top. Automatic folding and sealing. Print mark sensor included. PID temperature control. Machine stopping in selected position to avoid film sticking to the knife. Optional: gas flushing device. - Technical specifications: max. film width: 350mm | 2 rotating knives | 220V, 2.6kW | no compressed air required | max. speed of the machine in neutral: 180 cycles/min | max. bag (not product) dimensions (mm): L((65-190)OR(120-280))xW(50-160)xH(0-40) | machine dimensions (mm): L4020xW770xH1450 | weight (n ...

Flowwrap machine for very economic high speed OPP film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, small products. Infeed table with automatic transport through pushers into the machine. Film supply from the top. Automatic folding and sealing. Print mark sensor included. PID temperature control. Machine stopping in selected position to avoid film sticking to the knife. Optional: gas flushing device. - Technical specifications: max. film width: 180mm | 3 rotating knives | 220V, 2.4kW | no compressed air required | max. speed of the machine in neutral: 330 cycles/min | max. bag (not product) dimensions (mm): L(50-115)xW(30-80)xH(0-35) | machine dimensions (mm): L3770xW670xH1450 | weight (net/gross): 700/750kg. The machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the OPP film. Please note that our new pric ...

Flowwrap machine for very economic high speed OPP film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, small products. Infeed table with automatic transport through pushers into the machine. Film supply from the top. Automatic folding and sealing. Print mark sensor included. PID temperature control. Machine stopping in selected position to avoid film sticking to the knife. Optional: gas flushing device. - Technical Specifications: max. film width: 180mm | 4 rotating knives | 220V, 2.4kW | no compressed air required | max. speed of the machine in neutral: 330 cycles/min | max. bag (not product) dimensions (mm): L(45-90)xW(30-80)xH(0-35) | machine dimensions (mm): L3770xW670xH1450 | weight (net/gross): 700/750kg. The machine has to operate with minimum of 30 cycles per minute to avoid premature melting of the OPP film. Please note that our new price ...

Bag clip machine HARTMANN type EC-101-i for sealable plastic clips.

Output: approx. 20 to 250 pieces per minute Format range: approx. 140 mm width max. approx. 60 mm height max. Foil width: approx. 430 mm max. Foil section: approx. 80 to 350 mm Net weight: approx. 800 kg

Used flowpack packaging machine from IMA Ilapak model Carrera 500 PC. 1 Packing range: - Jaw width 150 mm: L. 50 - 500 mm width 20 - 230 mm H up to 90 mm - Jaw width 180 mm: L. 100 - 550 mm width 20 - 230 mm H up to 120 mm Packing speed up to 100 packs per minute Packing speed depends on product length and film properties packaging film. 3. Packing material: All films used for packaging on this type of machine, hot or cold sealed. (OPP, cellophab, etc.). 4 Film roll sizes: width 650 mm, Outer roll diameter max. 350 mm, Inner roll diameter 76 mm, maximum roll weight 40 kg. 5. voltage: AC 220/380 V, 3 phases, N+E, 50/60 Hz, Energy consumption max. 4 kVa. 6. machine dimensions: 3.930x1.285x1.460, Machine weight 650 kg.

never used System • Dimension mm 1700 x 1050 x h 1350 • Vertical Box Motion system • Power 400 Volt 50 / 60 Hz • Air supply 6 Bar Technical • Max Film mm up to 720 • Max Speed 25 ppm • Max Jaws mm up to 310 • Max Length Pack mm up to 400

The scope of delivery includes: 01x Kolli flow rack frame, used Manufacturer: Tegometall Type: CI Material color: white / galvanized Material color (rolls): white for truss width: approx. 2,800 mm Total width: approx. 2,780 mm Total depth: approx. 2,450 mm Total height: approx. 110 mm Further data on the flow rack frame: Number of roller strips per segment: 18 pieces Roller strip spacing: approx. 130 mm Tray width: approx. 440 mm

Type 256-200 , Range 200 sccm

Used BOSSAR B-1400/PH Horizontal Single Dose Packing Machine

BELCA brand packaging machine Horizontal wrapping machine model BFI 200 PLUS B-300 symmetrical b7077k With video display

BVM Mailmaster 4002 Year 2008 immediately available to LAger

New cooling water distributor 25 duct with very high-quality components - ready for connection The manifold was made for a large vacuum system, which was then not accepted. It was made in 09/2018 and then fully shrink-wrapped and packed in a box. Today the distributor was unpacked for photos. - 25 cooling circuits - 3 x ifm SM8000 magnetic-inductive flow meter - 22 x ifm SM6000 magnetic-inductive flow meter - 4 x ifm AL1222 IO-Link master with EtherNet/IP interface - A VA ball valve from ECON at the supply and return, 50 pieces in total (different sizes) - a Swagelok proportional RL3 overflow valve on each channel (various dimensions) - Pressure and temperature measurement in flow and return - Swagelok fittings The distributor is about 3m wide. It can be viewed by appointment in Dreye near Bremen

Unused

Unused

Unused

Flowpack machine Flow-wrapping machine Manufacturer: Type: DIBIFLOW 500 Year of construction: 2022 Horizontal rotating packaging machine with spool from above Cantilevered structure in aluminum and painted steel (RAL 7035 GREY – RAL 5002 BLUE) and stainless steel housing AISI 304 stainless steel parts that come into contact with the product Adjustable support legs Side-adjustable guides Studded loading belt, length 1600 mm (standard) Pressure lugs with fast extraction in plastic material suitable for contact with food Longitudinal welding machine with two pairs of wheels Diameter 120 mm the first cold to pull the second hot for welding Single-sector turnstile welding machine with a width of 240mm Independent temperature adjustment (cross welder and longitudinal welding wheels) Electronic safety coupling on the transverse welders Tunnel / film conformer with ...

Including documentation.

Bag dimensions: 30-400x10-200x0-70mm, max. output: 250 bags/min, connected load: 4.5kW, length: 3000mm, width: 1075mm, height: 1600mm, weight: 900kg.

With documentation, an inspection is possible.

With documentation and some accessories, an on-site inspection is possible, but not under power.

Type HFFS Output: up to 100 packs per minute Bag length variable: min. 125 mm to max. 625 mm Product length: min. 90 mm to max. 500 mm Product width: min. 10 mm to max. 150 mm Product height: min. 5 mm to max. 150 mm equipped with print mark control

One-way flow control valve -Type: GR 1/4 -Price: per piece -Number: 6x available -Weight: 0.1kg/piece

Circular current choke KTB, SMALL TRANSFORMER CONSTRUCTION KEFFERHAUSEN LL 132/70 ( LL132/70 ) 7100 910 00 unused ! Dimensions: 260 x 190 x 140 mm

Display, display for flow meter +GF+ SIGNET 8512 Flow Transmitter PN: 3-8512 used, tested ! Dimensions: 140 x 110 x 70 mm

magnetic-inductive flow meter ENDRESS + HAUSER PROMAG 33A 33AT04-FD1BA41A22A 20 - 55 V AC / 16 - 62 V DC IP67 suitable S364 ! Dimensions: 340 x 250 x 200 mm New

Flow indicator IFM VS 0200 SR 0100 24 V DC Dimensions: 110 x 75 x 55 mm

Flow meter ENDRESS + HAUSER FLOWTEC VARIOMAG SPEEDMAG P 1 D4 655 PICOMAG Measuring range: 0.091 m3/h 220 V Dimensions: 295 x 235 x 115 mm

magnetic-inductive flow meter ENDRESS + HAUSER PROMAG 33F 33FT15-FR1AA11A22A 20 - 55 V AC / 16 - 62 V DC IP67 suitable S408 ? Dimensions: 320 x 235 x 210 mm

Flow meter with indicator, flow switch WEBER SENSORS GmbH Captor 4320.13 pipe diameter: Ø 12 mm Supply voltage: 18 - 30 V DC used, tested ! Dimensions: 100 x 100 x 60 mm

Flow control valve, hydraulic valve HERION MR 6 HVG 4 024 1 00 51 001 51 P max.: 315 bar Q max: 16 l/min with key ! used, tested ! Dimensions: 70 x 50 x 150 mm

Flow control valve, hydraulic valve HERION MR 6 HVG 3 024 1 00 51 001 50 P max.: 315 bar Q max: 8 l/min with key ! New ! Dimensions: 70 x 50 x 155 mm

Flow control valve, hydraulic valve HERION MR 6 HVG 4 024 1 00 51 001 51 P max: 315 bar Q max: 16 l/min with key ! New ! Dimensions: 70 x 50 x 155 mm

Flow control valve BUCHER MTKA15x-0M08 Q: 16 l/min Pmax.: 315 bar used, tested ! Dimensions: 135 x 125 x 45 mm

Flow control valve BUCHER MTKA04x-0M08 Q: 3 l/min Pmax.: 315 bar used, tested ! Dimensions: 135 x 100 x 45 mm

Flow control valve BUCHER MTKA16x-0M08 Q: 16 l/min Pmax.: 315 bar used, tested ! Dimensions: 135 x 125 x 45 mm

Flow relief valve with lock, hydraulic valve ORSTA 06-24.11 TGL 26245/40 Pn: 32 MPa Dimensions 150 x 50 x 50 mm

Radial piston flow divider JAHNS MT-GM1 Dimensions: 470 x 290 x 290 mm

Flow switch, hydraulic valve VICKERS DGMFN-5-X-A2W-B2W-30 867335 315 bar Dimensions: 225 x 70 x 50 mm

Volumetric flow limiter WOERNER DUK-A/2,5/0 unused! Dimensions: 125 x 55 x 50 mm

Volumetric flow limiter WOERNER DUK-A/0/1,8 unused! Dimensions: 125 x 55 x 50 mm

Flow relief valve, hydraulic valve ORSTA 06-06.11 TGL 26244 / 40 Nominal pressure: 32 MPa (320 bar) used, tested ! Lock without function ! Dimensions: 115 x 50 x 50 mm

Gas Flow Controller TYLAN MILLIPORE FC-2900V-4V Gas: SiH4 P: 10 - 40 PSID Dimensions: 125 x 125 x 40 mm

Gas flow controller TYLAN MILLIPORE FC-2910V-4V Dimensions: 125 x 125 x 40 mm