flow forming used for sale

Pressing force: 130t, max. wire diameter: 17mm, cutting length: 150mm, ejector stroke matrix: 125mm, ejector stroke stamp: 58mm. WZ dimensions length/diameter: blade: 80mm/50mm, die: 180mm/90mm, punch: 195mm/75mm. Weight without housing: 27t. Available from 26.08.2024.

Machine was overhauled, including moulds and tools.

Machine Pastry forming/speculoos machine Cleaned & functionally tested Properties: + different roller shapes possible + easy and simple operation + manual, analogue control + Machine equipped with new suction belt and new bearings STANDARD equipment: + incl. 1 reel (3 different motifs to choose from) SPECIAL EQUIPMENT: - 4 more reels available (3 different motifs) - Surcharge for each additional roller: 350,-- € net - Flat rate for all 5 reels: €1,200,-- net - Surcharge for new painting of the machine: 850,-- € net Specifications: - Year of construction: 1979 - Dimensions: 48 x 137 x 133 cm (W x D x H) - roller width: approx. 23.5 cm - Roll diameter: approx. 12.5 cm - Figure height: approx. 4.5 cm to 8 cm - Figure width: approx. 3.5 cm to 4 cm - Figure thickness (/ thickness): approx. 3 mm to 5 mm - Net weight: approx. 150 kg - Power: 380 V - 3Ph - 5 ...

COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine was manufactured in Italy in 1988. The thermoforming line, consisting of, among others, a heating station, a bulge photocell and a moulded parts conveyor, is designed for the fully automatic production of oversized parts using the thermoforming method. The COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine is equipped with a gauge measuring the thickness of the platen in order to avoid accidentally taking two platens from the package at the same time. The platens, by means of transport grippers actuated by pneumatic cylinders, reach the individual work stations, i.e. the preheating station, consisting of two opposing panels, the plasticising preheating station and the forming unit. In the forming unit, the thermoforming process takes place, during which a BOTTINI GIANNI press with an upper and lower moving table peripherall ...

Number of lanes: 2, bag width: 12-50mm, bag length: 20-200mm, max. sealing force: 1000N, max. throughput: 2x 100 bags/min, weight: 1t, operating hours: approx. 3500h, with integrated belt checkweigher Wipotec-OCS HC-A-2000-2-2-track and counting and grouping system Merz KT-160.

Max. speed: 90 bags/min.

Including Ascending Conveyor SBM 45 and Counting Machine ZMR 3/ 3-130.

Filling format: 70-150g, forming shoulder format: 120/ 140mm, with three forming sets and multi head scale.

Product dimensions: 650-1200x300x240mm, roll width: 800mm, roll diameter: 350mm, max. speed: 50 cycle/min, length: 5170mm, width: 1452mm, height: 1435mm, weight: 1.1t, one band is torn and needs replacing.

Was used for filling 1l milk bags, output: 1000l/h, the electronics of the machine was overhauled.

Was used for filling 10l milk bags, there is a second machine as a source for spare parts available.

Compressed air supply: 6bar, connected load: 7kW.

There are two identical vertical bag filling machines available, weight: 1.1t.

Working height: 820-900mm, max. film width: 550mm, output: 60 cycles/min, product width: 25-450mm, product height: 2-200mm, product length: 80mm to unlimited, connected load: 3kW, length: 2140mm, width: 1450mm, weight: 650kg, with documentation.

Make WM Model FC 780E Speedmaster Year 2010 Condition Very Good Hours approx 21500 Delivery Date Immediately Stations Forming, Cutting and Stacking Max Tool Size 780 x 570 mm Depth of Draw 130 / 130 mm Max Material Width 810 mm Max Sheet Thickness 1.8 mm Max mould closing force 20,000 daN Forming pressure 7 bar Maximum cycles-minute 45 Total Connected Load 140 Kw Approx Total Length 11000 mm Approx Width 5000 mm Approx Height 2550 mm Approx Total Weight 11000 kg All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale

Make WM Model FC 780E Year 2007 Condition Excellent Hours approx 29950 Delivery Date Immediately Stations Forming, Cutting and Stacking Max Tool Size 780 x 570 mm Depth of Draw 130 / 130 mm Max Material Width 810 mm Max Sheet Thickness 1.8 mm Max mould closing force 20,000 daN Forming pressure 7 bar Maximum cycles-minute 45 Total Connected Load 140 Kw Approx Total Length 11000 mm Approx Width 5000 mm Approx Height 2550 mm Approx Total Weight 11000 kg All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale

Product number: 2786 Type: MLF600 Serial number: 726 Year of construction: 2001 Belt width: 600 mm Capacity: max. 75 strokes/min. Hopper: 380 litres Compressed air: 6-8 bar, 300 nl/min. Power: 3 x 400V, 50Hz, 23kW Dimensions: 2270 x 1660 x 2550 mm Weight: 1782 kg

THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) M. No.: 403 Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool: Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Ven ...

THERMO FORMING MACHINE ILLIG RDM K 50 WITH INLINE EXTRUDER (COMPLETE LINE) M. No.: 322 Counter: 80188 hours // Power: 800-1000 kg/h Max. film width 700-800 mm Equipment / Additional information: The machine is constructed as follows: -Kuhne Extruder KF70E & Co. Extruders K45-24D -Colotronic dosing unit CSK30 with 4 components -Kuhne smooth and cooling rolls (calendering) / GA4/900; puller: BA2-1/900 -Thermoforming machine ILLIG RDM K 50 -Greiner stacking / Transfer device R3 (No.:00020) // Age: 1998 -Illig mill RS75B // Age: 1999 Fully existing infrastructure; control cabinets, pumps, etc. Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp

Used minced meat production and packaging line. New 2010. 1.Minced meat production and portioning line - specification Assumptions: -Product: pork minced meat -Product: pork minced meat -Product capacity: approx. 800 - 900 kg / h -Packaging line capacity: up to 55 - 60 portions (500 grams) /minute -Packaging machine capacity: up to 40 trays/minute -Portion size: 500 g -Packaging format: TRAY SEALER / MAP packaging/. -Packaging: PP: 205 x 160 x 50 mm -Packaging: automatic -Product temperature: - 1 /+ 1 °C -Declared portioning accuracy: +/- 1.5% (depending on the product) -Vacuum Tumbler REX RVF 736 -Machine suitable for stuffing, mincing and portioning -Construction in stainless steel -Operation via 12" touchscreen -Memory: 100 operating programmes Stuffing capacity: up to 3600 kg / h -Productivity for filling: up to 3600 kg / h -Productivity for minced meat portionin ...

Pastry machine Janssen Model: FF 2500 with 1 rollers and 10 sheets Table Machine Biscuit machine! Connection 400 V, 16A-CEE plug Used machine overhauled with 6 months warranty Visit our large bakery equipment warehouse!

Product number: 2800I Type: VM400HSE Serial number: 2086 Year of construction: 1999 Belt width: 400 mm Capacity: max 55 strokes/min Hopper: 270 litres Water: 4 Bar Compressed air: 6 - 8 Bar, 300 l/min Power: 3 x 400V, 50Hz, 7.8kW Dimensions: 2750 x 900 x 2350 mm Weight: 1186 kg

croissant rollers

Product number: 2825 Type: VM600HSE Serial number: 639 Year of construction: 1998 Belt width: 600 mm Capacity: max 65 strokes/min. Hopper: 320 litres Water: max 4 Bar Compressed air: 6-8 Bar, 300 L/min. Power: 3 x 380V, 50Hz, 22kW Dimensions: 2300 x 1650 x 2100 mm Weight: 1800 kg

OMCA 900 Mitre Saw Sheet metal chamfering machine OMCA 900 Manufacturer: OMCA Type: 900 Year of construction: 2012 Technical Specifications Motor power: three-phase 230/400 volts, 4 kW, 50/60 Hz, 4 poles Tilt adjustment: 5 mm - 33 mm (50 mm diagonally) Bevel angle: 15° - 60° Sheet thickness: 8 mm - 50 mm Milling cutter Ø 63 mm Z 5 Cutting speed: 0 - 750 rpm Feed speed: 0 - 1 m/min Working height: 800 mm ÷ 980 mm Dimensions: 600 x 650 x H 1600 mm Weight: 175 kg Machine in excellent condition.

Product number: 2831 Type: VM400HD Serial number: 1751 Capacity: 50 strokes/min. Belt width: 400 mm Power: 3 x 380V, 50Hz, 7.7kW Weight: 830 kg

Sheathing line Roll forming line for laminate Stacking of the panels Sawing the panels Milling the panels Transport Gluing of the decorative foil Transport More items new and used - you can find them in our shop! International shipping costs on request!

Ham press Erhard approx. 120 liters capacity, completely in stainless steel, compressed air operated, with intermediate boards and stainless steel brackets, Dimensions LxWxH approx. 107x59x99cm, weight approx. 180kg, good used condition, works perfectly

The line avaible to sell is used but in very good conditions. It is equipped with: n.1 Decoiler 1250mm x5 ton n.1 Roll-forming machine with n. 12 passes- useful width 1000 mm n.1 Set of Forming rolls assembled to produce corrugated profile 75x18 mm n.1 Flying shear with guillottine blades (pneumatically operated) n.1 Electrical system with programmable device n.1 Tank for compressed air (without compressor)

Rib Type Roofing Machine. Short, mobile line for the production of trapezoidal profiles for roofs and facades. Profile height 12 mm. Used line. Touch control. Works properly. Repair is not required. Suitable material Colored Steel plate, galvanized board, Aluminum plate Width of the raw material 1250mm Rows of rollers 10 rows Material of roller high grade 45# steel(plated chrome on surface) Total power 4+4kw Thickness of raw material 0.3-0.6mm diameter of shaft ￠70mm Voltage 380V 50Hz 3phases The operation of touching screen It adopts industrial computer to control. The target piece’s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use.

OMG OMF/PVE 50-PN-M Technical specifications: Manufactured: 2005 Operating hours: 5.745.000 cycles Material: PS, PVC, PET, PP, EPS Stations: Forming, Cutting and Stacking Forming Area: 770 x 650 mm Maximum Film width: 820 mm Maximum forming depth: 120 mm Maximum dry cycle speed: 30 cycles/min Max.Closing Force of the Cutting Press: 60 ton Maximum Pressure: 6 bar Vacuum pump motor power: 2,2 kW Total heating power of the upper oven: 36 kW Total heating power of the lower oven: 33 kW Vacuum pump capacity: 100 m^3/h Dimensions (L x W x H): 10,0 x 2,4 x 2,7 m Total Weight: 8000 kg The price includes dismantling and loading costs

Stamping standard

Machine designed for product forming. – Manufacturer:Koppens – Model: VM 400 HD – Power: 7.67 kW – Voltage: 380 V – Amperage: 16.57 A – Frequency: 50 Hz – Weight: 830 kg – Mesh belt conveyor – Conveyor width: 400 mm – Dimensions (L x W x H): 2000 x 950 x 2350 mm

Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included

M. No.: 322 // Counter: 80188 hours Max. film width 700-800 mm Equipment / Additional information: The machine is constructed as follows: -Greiner stacking / Transfer device R3 (No.:00020) // Age: 1998 -ILLIG mill RS75B // Age: 1999 Control cabinets, etc. Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp

MACHINE WAS ORDERED BARND NEW FROM THE 1. ST OWNER MACHINE IS STILL ON POWER WORKING DAYLY ORDERS LASER POWER : 2000 W MAX SHEET THICKNESS: 4 mm MAX PUNCHING FORCE: 165 kN ATTACHED VIDEO FOR CUSTOMER WE CAN ORGANIZE DISMANTLING, TRANSPORT

Continuous production makes up to 150 portions per minute with maximum weight accuracy. for diameters up to 50 mm Power: 0,4 Kw 400v/3ph/50hz Fully refurbished

bushing cut-off diameter range 14-22 mm number of dies 7 number of stations 8 cutting length 4-67 mm shaft length under head 4-75 mm output - pieces/min 175 press power 200(126) to max. outside dia. of round pie 42 mm

Fish or meat ball former, model SY019, made entirely of stainless steel. External dimensions: 970 mm wide x 570 mm long x 1970 mm high. Output: 600 units/minute Its condition is excellent re-release. Virtually new overhauled and guaranteed equipment. OCCASION. NEGOTIABLE PRICE.

Fish or meat ball former, model YW-500, made entirely of stainless steel. External dimensions: 730 mm wide x 600 mm long x 1820 mm high. Output: 550pcs/minute Its condition is excellent re-release. Virtually new overhauled and guaranteed equipment. OCCASION. NEGOTIABLE PRICE.

FORMING MACHINE, KOPPENS TYPE: VM 400 Technical description: Serial number: VM 400/30-1517 Power supply: 380 V, 3 Ph, 50 Hz, 4,94 kW, 12.39 A Weight: 550 kg Mesh belt conveyor Conveyor width: 400 mm Dimensions: 2400 x 680 x 2270 mm

Rheon Model KN100 Cornucopia Encruster. Maximum speed approx. 60 pieces per minute, depending on the product. Weight capacity from 10 - 90 grams. (2) 11.5" x 8" x 7" stainless steel feed hoppers, each with (2) 2.5" diameter feed screws. Approx. 5 inches wide discharge conveyor. Digital touch controls. Compact forming, filling and portioning machine Connection 400V, 16A-CEE plug Used machine from bakery

Pastry line whit tools for cutting , and filler

Koppens BVE400 HD Former Stainless Koppens forming machine, comes with lots of different forming plates for different size products, previously used for hamburgers, belt 400mm, variable speed, up to 50 cycles per min, 3Ph

Illig RDM 37/10 Thermoforming Line - Made in Germany - Year of construction: 1986 - Under & Top Heating - DIV - Moulding area: 475 x 250 mm max. - Film width: 495mm min / 150mm max. - Refurbished: new bearings, new bolts, new bushings & electronics, etc. - Fully functional - with many accessories - several different forming tools Produce cups, bowls and similar products with the ILLIG RDM37/10 pneumatic forming machine. The thermoformer with forming/stamping technology works reliably with precision mechanical drives and delivers high molded part quality and performance.

Staple forming machine SpeedySeamer RAS 22.07 Production of all staples for the ventilation industry Max. profile height 20 mm Speed 16 m/min Processing stations 7 Max. sheet thickness 1.5 mm Based on strength of 400 N/mm². Lifting device for aluminum sheets Reduces pressure and prevents aluminum breakage - Straightening roller for left and right roller set with adjusting wheel - For upward straightening of bent sheets - For rounding the bend Support tables - Standard version - With right-hand sheet guide - With left-hand sheet guide

pneumatic meat press in good condition The machine is fully functional and immediately available.

Boix Q1530 Tray forming / Tray erecting machine OPERATION : Mechanical, Electrical and Pneumatic BOX DESIGN : PLAFORM, P-84, CITRUS BOX, C-1, BIG EAR, COLUMN ESTIMATED PRODUCTION : 6 Speeds from 800 to 1.800 trays/hour (at intervals of 200) GLUE SYSTEM : By injection, Hot-Melt, Melton NC-16 (cap. 14 kg.)

Inv. Num. : 4010 Type: RM1 Producer: P/A INDUSTRIES GmbH Created: 2014 Parameters: Maximum sheet plate width: 675 mm Maximum sheet thickness: 1 mm Maximum product length: 10 m Line speed: 50 m/s Al Strip of Thickness: 0 25-0 4 mm

Two (2) aluminium roll forming production lines for the production of spacer bars for double glazing. - Dimension of machines: 18-20m length and 4m width - Dimension of welding unit and cooler: 4m length and 2m width - Min. and max. speed: from 90m/min up to 170m/min - Energy power from 76kwatt up to 120kwatt Each line consists of the following parts: 1) Decoiler 2) Base machine 3) Welding unit EMMEDI 4) Cooling unit 5) Degreasing unit 6) Electronic flying shear 7) Exit Bench The groups of rollers available per type of product are as follows: For the production of bendable spacers with height 6,5mm: 5,5 8,5 9,5 11,5 14,5 15,5 19,5 Number of groups: 7 Number of auxiliary groups 7 For the production of normal (not bendable) spacers with height 6.5mm: 5,5 6,5 7,5 8,5 9,5 11,5 13,5 14,5 15,5 17,5 19,5 Number of groups: 6 Number of auxiliary groups 3 The alumi ...