flott 16 used for sale

Chuck flange, flange mount, chuck flange, drive flange, intermediate flange, chuck faceplate, mounting flange -Muck flange: Mounting flange for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: 162 mm -Socket: Short cone 5, cone Ø 79 - 82 mm -Bolt circle: Ø 105 x 10 mm -Dimensions: Ø 162 x 25 mm -Weight: 2.4 kg

Qty. 1 Second-hand extrusion press line – in storage – never installed! Mfc.: Korean Manufacturer Force: 1650 UST Built: 2024 Type: Direct Single Action Horizontal Short Stroke Back Loading Aluminum Hydraulic: Rexroth PLC: Mitsubishi Diameter of billet: 152 mm (6 inch) Length: 400 – 750 mm Size of container: Φ157 mm × 800 mm Size of exit hole: Φ180 × 250 mm Container Size Inner Dia.: 164 mm (6˝) Length: 700 mm Main Ram Stroke: 1200 mm Scope of supply: Loading Lift System Billet Pushing Induction heating Furnace Billet Conveyor for Discharge Billet Feeding into Press Cooling System Hot Saw Run-out Table Double Puller Stretcher Finishing Saw Dies Furnace Aging Furnace

PLC control, electronic module, control unit, Promodule, controller, compact controller, PLC module, controller -Manufacturer: Inovance, Programmable Logic Controller (PLC) -Type:H 1U-1614MR-XP -Transport dimensions: 110/90/H90 mm -Weight: 0.5 kg

- Condition: Presentation Machine - Usable Volume: 160 L - incl. Control - incl. Pump to empty out

Mobile extraction Brand: Riedex Type: DM 160 New machine Technical data: - Motor power 3 kW - Nominal volume flow 1448 m³/h - Associated negative pressure 3000 Pa - Max. volume flow 2000 m³/h - 10.6 m² filter surface - motorised cleaning - Residual dust content

Hydraulic vise, machine vise, NC compact clamp -Handover in its current condition as inspected The vise has no spindle and is therefore sold as a source of spare parts. -4x clamping jaws: 200 x 60 mm -2x clamping jaws: 160 x 50 mm -Dimensions: 530/160/H165 mm -Weight: 104 kg

Mobile dust extractor Brand: SCHUKO Type: Vacomat 160 XPe New machine Technical data: Connection Ø: 160 mm Filter cleaning: motorised Volume flow: 1.593 m³/h Nominal volume flow: 1447 m³/h Motor power: 2,2 kW Negative pressure: 2.200 pa Filter surface area: 9,5 m² Test sign H3 / BGHM HO 123027 Dust level M, AWN 16 Noise absorbation: 69 dB(A)

PRESS DESIGN   drive system: knuckle-joint   frame design: H-frame, monoblock SLIDE   total force (nominal): 160 to   stroke: 60 mm   stroke rate (max.): 72 /min COUNTER RAM   nominal force: 40 to   stroke: 60 mm V-RING   nominal force: 50 to   stroke: 13 mm TOOL DIMENSIONS   lower table (left-right): 470 mm   lower table (front-back): 470 mm   upper table (left-right): 500 mm   upper table (front-back): 470 mm   shut height max.: 277 mm   ram adjustment: 80 mm   distance between columns (H-frame): 500 mm   passline opening (free passage in side columns): 220 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 210 mm   sheet thickness max.: 6 mm   feeding step max.: 180 ...

Platform trolley, transport trolley, shelf trolley, sorting trolley, order picking trolley, mobile racking -Width: 620 mm -Depth: 800 mm -Height: 1660 mm -Quantity: 2 available Price: per piece -Weight: 50 kg/piece

electric motor, three-phase motor -Power: 13/17 kW -Speed: 1470/2950 rpm -Shaft: Ø 42 mm -Design: B5 -Protection class: IP 54 -Dimensions: 620/350/H400 mm -Number: 3x motors available Price: per piece -Weight: 130 kg

Press capacity: 315 ton Ram stroke adjustable: 30 - 100 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 370 mm Table surface area : 1600 x 1100 mm Slide area: 1600 x 1100 mm Hole in table: 600 x 180 mm Number of strokes: 15 - 180 s.p.m. Table height over floor: 1200 mm Required power: 170 kW Height over floor approx.: 4900 mm Dimensions L x W x H: 4900 x 1900 x 4900 mm Weight of machine approx.: 55 ton

Bending tool, die, upper blade, top tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Dimensions: 20 x 160 mm -Recording: 35 x 31 mm -Length: 2680 mm -Weight: 110 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 200 mm -Jaw height: 63 mm -Clamping depth: max 165 mm -Weight: 35 kg

Steel holder, clamping plate with T-slot -Tool height: max. 45 mm -Dimensions: 260/160/H220 mm -Weight: 26 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 150 mm -Clamping depth: max. 160 mm -Dimensions: 500/270/H170 mm -Weight: 40 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 190 mm -Clamping depth: max. 160 mm -Dimensions: 630/200/H160 mm -Weight: 55 kg

Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Required power: 15 kW Weight of machine approx.: 12 ton

Manufacturer: Heesemann Motor Querschleiffaggregat ATB Loher, Type: AF 160 L/4/2F-21, Maschinennummer: 3716729-20, From machine: Heesemann Schleifmaschine, Volt: 400, cos: 0.90/0.95, IP: 54, Power kW: 13/17, Volt/Hz: 400, pm: 1470/2945,

Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Baking: soft -Mouth size: Ø 200 mm -Weight: 22 kg

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 160 mm -exciting: centric -Replaceable jaws: soft -Cone mounting: Ø 105 mm -Bolt circle: Ø 135 mm -Weight: 18 kg

Press capacity: 160 ton Ram stroke adjustable: 20 - 130 mm Slide adjustment: 100 mm Daylight: 560 mm Table surface area : 1500 x 800 mm Slide area: 1400 x 800 mm Number of strokes: 20 - 60 s.p.m. Distance between the columns F - B: 520 mm Height over floor approx.: 3550 mm Required power: 48 kW Weight of machine approx.: 26 ton

Manufacturer: Böllhoff Durchlauferhitzer Lack, Type: 1692, Year: 1997, FREETEXT1: Materialüberdruck 250 bar, FREETEXT2: Materialtemperatur max.90 regelbar, FREETEXT3: Prüfdruck 360 bar, FREETEXT4: Nennstrom 13 Ampere, FREETEXT5: Nennspannung 230 Volt, FREETEXT6: Nennleistung 3 Kw, FREETEXT7: Ex geschützt, Year :1997

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 125 mm -exciting: centric -without interchangeable jaws: without -Weight: 4 kg

Pipe clamping system, clamps for butt welding machine, butt welding machine, mirror welding machine, pipe welding machine, assembly device for pipes -Holes diameter: 90/105/125/160 mm -Angle: adjustable -Double clamping device: for pipe mounting -Weight: 65 kg

geared motor, electric motor -Speed: 89 rpm -Power: 0.3 kW -Design: B14 angle -Shaft diameter: mm -Protection class: IP 65 -Weight: 10 kg

geared motor, electric motor -Speed: 37 rpm -Power: 0.18 kW -Design: B5 -Shaft diameter: Ø 20 mm -Protection class: IP 65 -Number: 3x motors available Price: per piece -Weight: 8 kg

Manufacturer: Johannsen, Type: LN 160 M, Belt length mm: ca.6500, Sanding hight mm: 400, Table width mm: 1200, Table length: 2600, Manual hight adjustment: yes, Sanding belt engine kW: 5,2/5,7, Travel range table mm: ca.1000, 2 rotary directions: yes, Stop straightedge: yes,

Manufacturer: Homatic, Type: Ausgangskarte 16x220V, Model: 2us ohne RC-Glied, Serial number: 2-083-01-5203, Nur Abholung : 350,

geared motor, electric motor -Speed: 19.5 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 22 kg

geared motor, electric motor -Speed: 19.5 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 22 kg

geared motor, electric motor -Speed: 16.2 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Number: 3x geared motors available Price: per piece -Weight: 21 kg

geared motor, electric motor -Condition: Geared motor is unused -Speed: 33 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Number: 4x geared motors available Price: per piece -Weight: 20 kg

Manufacturer: Kuper, Type: KFE TAN 2 1600/450, Year: 1979, Control: Kuper, Foil wrapping machine mm: 1600, Foil stations: 1, Welding frame dimensions mm: 1450, Intermediate transport mm: 3.000, Shrinking tunnel mm: 4.800, Schrumpftunnel kW Leistung: 70, Heating: Elektro - 59 kW, Through running hight mm: 200, Working width mm: 800, Conveyour system: Band/Stange, Year :1979

BÜHLER Automatic Scale MSDL MEAF - 160 EX With pre-tank and post-tank From: approx. 900 x 290

geared motor, electric motor -Speed: 2.5 rpm -Power: 0.11 kW -Design: B5 -Shaft diameter: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Number: 2x geared motors available Price: per piece -Weight: 22 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 160 mm -Number of teeth: 10 - Carbide indexable inserts: 16 mm -Recording: SK50 -Weight: 14 kg

end mill, end mill, milling cutter -Outer diameter: 160 mm -Teeth: 16 -needs to be reground -Weight: 10 kg

Manufacturer: Wemhöner, Year: 1997, Type: KTV 28/15 - 165, Work piece width min-max mm: 1500, Min.-max. workpiece length in mm: 2800, Min.-max. workpiece height in mm: 10-40, Max. temperature °C: 90 / 180, Placing table: yes, Through running machine: yes, Pressing cylinder: 6, Pin system: no, Landing opening mm: 1, Foil cutter: yes, Through running machine: yes, Year :1997

Universal machine Manufacturer: Stephan Type: KG 160 Technical specifications : kW 1.1/1.8 RPM 152/296 HZ 50 Suitable for cutting, grating, pureeing, grating depending on the tool used

Rolling jaws, floating center jaws, low-profile jaws -Dimensions: 160/31/H63 mm -Weight: 3 kg

Manufacturer: Cefla, Type: UV 2000 M2/1600, Work piece width min-max mm: 1600, Working widht max mm: 1600, Number of lamps: 2, kW power 1 lamp: ca.12, kW power all lamps: 46,25, Lampen gerade eingebaut: 2, Lampen von unten: no, Adjustable: yes, Power per lamp watt UV: 80-120 unter<CRLF>vorbehalt, od distance mm: 80, Conveyor lenght mm: 3000, Outer belt width mm: 2800, Working hight approx mm: 60, Conveyor: Stange, Exhaust air diameter mm: 2, Working height in mm: +/--950, Feedin speed m/min: 5-15, Rod transportation: yes,

Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate -Intermediate plate: for hydraulic press eccentric press -Width: 1630 mm -Length: 1250 mm -Height: 100 mm -Plate: Solid -Groove width: 22 mm -Weight: approx. 1000 kg

Grundfos Water Pump LP 65-160/154 Pump from 1993, used, 2 available. 3.9 KW, 22.5 m3/h, 10 bar Grundfos CRN3-23 Water Pump Manufacturer: Grundfos Model: LP 65-160/154 A-F-A-BUBE Serial number: 0060034-P2-9343 Type: Water Pump with Control Power [kW]: 3.9 Volume flow rate [m3/h]: 22.5 Pressure max [bar]: 10 Pumping height [m] 26 Year of Make: 1993 Weight [kg]: 40

thickness of jaw: 160 mm : 53 mm clamping width: 305 mm clamping capacity: 5,7 t weight: 60 kg dimensions of the machine ca.: 700 x 160 x 145 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

electric motor, three-phase motor -Engine: unused -Power: 18.5 kW -Speed: 2930 rpm -Shaft: Ø 42 mm -Design: B3/B5 -Protection class: IP 55 -Quantity: 6 pieces available -Price: per piece -Weight: 110 kg/piece

Oil-Insulated Power Transformers for Sale Transformer 1 - Manufacturer: ELIN - Model: TDQ-164A11S9K-99 - Power Rating: 15 MVA - High Voltage: - 121.5 kV (Position 0) - 118.463 kV (Position -1) - 115.425 kV (Position -2) - Low Voltage: 6.3 kV - Current Rating: - High Voltage: 71.3 A (Position 0), 73.1 A (Position -1), 75.05 A (Position -2) - Low Voltage: 1375 A - Frequency: 50 Hz - Cooling: ONAN - Year of Manufacture: 1994 - Status: Out of service since 2022 - Notable Condition: Relatively high CO levels (due to oxidation); insufficient oil inhibitor content. Oil treatment with inhibitor replenishment recommended. Find more here - / Contact us at -

Hydraulic pressure switch, pneumatic pressure switch -Type: EDS 1691-NC-016-000 -Pressure: 16 bar -Operating voltage: 24-20 VDC -Signal output: 4-20 mA Price: per piece Quantity: 2 available -Weight: 1 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer diameter: 180 mm -Quantity: 2 cutters -Bore: Ø 35 mm -Price: complete -Weight: 9.5 kg

Oil-Insulated Power Transformers for Sale Manufacturer: ELIN Model: TDY-164A11S9K-99 Power Rating: 15 MVA High Voltage: - 121.5 kV (Position 0) - 118.463 kV (Position -1) - 115.425 kV (Position -2) Low Voltage: 6.3 kV Current Rating: - High Voltage: 71.3 A (Position 0), 73.1 A (Position -1), 75.05 A (Position -2) - Low Voltage: 1375 A Frequency: 50 Hz Cooling: ONAN Year of Manufacture: 1993 Status: In operation until 2025 Notable Condition: High CO levels, insufficient oil inhibitor content. Oil treatment with inhibitor replenishment recommended. Find more here - / Contact us at -

Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 210 mm -Number: 2 milling cutters Price: complete -Weight: 8.5 kg