floor used for sale

Complete boiler system Weiss Year of construction - 1989 Power - 2500 kW For very wet chips incl. bark Water content - about 12500 l Water temperature - 120 degree Automatic chips infeeding with walking floor Movable sliding floor Day storage tank Automatic hydraulical ash removal Cyclon for dust separation Complete controling system Well maintained, excellent condition

Cat.-Nr. 11-3200 new Necessary space for mash and lauter tun: LxWxH: 3 x 2 x 2,80 m Necessary space for tanks: LxWxH: 4,0 x 5,0 m complete 2 brews / day = 10hl Basic Equipment The Brew House is complete with all equipment. All equipment are with high standard an very simple to use. This 5 hl Brew House is built as 2 devices-brew house manual version with manual butterfly valve. It is possible to make 2 brews/day (10 hl) Technology All the pipes can be cleaned and sterilized in the circuit over the pump included. a) In the mash boiler the mash will be cooked, then it will be pumped with one beer pump made of stainless steel from mash boiler to the lauter tun. b) After the lauter wort will be pumped back to the mash boiler. c) After emptying the lauter tun the grit floor will be removed. The lauter tun will be changed to a whirlpool. d) After cooking th ...

Cat.-Nr. 11-3210 new Basic Equipment The Brew House is complete with all equipment. All equipment are with high standard an very simple to use. This 10 hl Brew House is built as 2 devices-brew house manual version with manual butterfly valve. It is possible to make 2 brews/day (40 hl) Technology All the pipes can be cleaned and sterilized in the circuit over the pump included. a) In the mash boiler the mash will be cooked, then it will be pumped with one beer pump made of stainless steel from mash boiler to the lauter tun. b) After the lauter wort will be pumped back to the mash boiler. c) After emptying the lauter tun the grit floor will be removed. The lauter tun will be changed to a whirlpool. d) After cooking the hops a special injection valve is introduced inside the lauter tun so that it can be used as a whirlpool. Mashing Tun / Wort Boiler Volume brutto: ...

2st. DAUB oven THERMO-ROLLING type RDTO 08.12,5.10 SX02 ofen for 20 tins usable total area 10.00 m and 178 baking surface floor 1.00 m and 178 baking square measure floor 78 x 58 cm 2 ofen Totally total area 20.00 m and 178 - 40tins stove is in very good state general and thorough outdated. functions as anew. a very good steam. secondary circulation for the baking chamber. turbo-equipment. everything maagnetic pumps incl. Daub Thermooel-boiler arrangement with magnetic pumps including. 8 stuck anew stikkenwagen including. 80 stuck rand two rand alubleche sales incl. cargo and assembly on inquiry I also have to sell 2st. DAUB oven THERMO-ROLLING type RDTO 08.12,5.7 usable total area 7.00 m and 178 (7 auflage, high shelves) price on inquiry

Floor Type Milling and Boring Machine SKODA Model: WD 250 Offer ID: 452 Manufacturer: SKODA Model: WD 250 New in: 1969 Condition: very good, under power,being serviced Localisation: Poland - We are owner this machine ! Technical details Rotary table: 2 000 x 2 000 mm Floor plates (8 psc): 3 000 x 1 500 mm Spindle diameter: 250 mm Bed haight: 600 mm Bet width: 2 400 mm X Travel: 5 000 mm Y Travel: 4 000 mm Main spindle intersection: 250 mm Main spindle ball metrical: 140 mm Maximum moment on the main spindle axis: 300 000 kgcm Intersection of the rapid spindle: 125 mm Ball in the rapid spindle: 430 mm Maximum depth of boring with main spindle: 2 250 mm Maximum depth of boring with the rapid spindle: 630 mm Feed of the spindle's crosshead: 500 mm The deepest position of the main spindle axis over the bearing: 1 100 mm Dimensions: 12 500x6 000x9  ...

6pcs. DAUB oven THERMO-ROLL type RDTO 08.12,5.10 SX02 One oven for 20 sheets Total usable area 10.00 m² Baking area per floor 1.00 m² Baking area size per floor 78 x 58 cm 6 oven Total total area 60.00 m² - 120plates Furnace is in very good condition, General and thorough overhaul. Works like new. A very good steam. Secondary circuit for the baking chamber. Turbo equipment. All maagnetic pump incl. Daub thermal oil boiler system with magnetic pump Including. 12 stuck stikkenwagen Sale incl. freight and assembly on request I also have to sell 2st. DAUB oven THERMO-ROLL type RDTO 08.12,5.7 ( 7 editions, high shelves) Price on request

Cheap used and new seeCONTAINER for sale in different versions! From current stock we can offer used and new sea containers for sale / leasing / rental: - 20ft (6m) Standard Box Container - 40ft (12m) Standard Box Container - 40ft (12m) High Cube Container - 45ft (13.7m) High Cube - 20ft (6m) office container - 20ft (6m) sanitary container Special Special versions such as Double Door, Flat or Open Top are always available at short notice. VISIT US Sightseeing is possible at any time and at short notice at our depot in DE-83395 Freilassing. For this we ask for a short telephone arrangement. KNOWLEDGE ABOUT SEECONTAINER Sea containers are extremely stable and are made of 2mm-sifted rust-coated Corten steel, which is also coated with saltwater-resistant ship paint. They have a reinforced forklift-passable floor, which is covered with 20mm waterproof plywood panels made  ...

From the current promotion we offer cheap 20ft first trip containers! Sea containers are extremely stable and are made of 2mm-sifted rust-coated Corten steel, which is also coated with saltwater-resistant ship paint. They have a reinforced forklift-passable floor, which is covered with 28mm waterproof plywood panels made of hardwood. 20 feet (6m) of sea containers have two forklift pockets incorporated into the floor scaffolding and can therefore be easily lifted and implemented without damage by means of forklifts, i.e. no crane is required for lifting. Due to their massive and weather-resistant design and the fact that sea containers are manufactured according to ISO and CSC standards, they are perfectly suited as storage, material or workshop containers and can be sold again, especially after many years of use, almost without any loss of value. TECHNICAL DATA / TECHNICA ...

Totalent emptyer with hydraulically operated floor flaps over the entire length, drive 37 kW via Flender gearbox, incl. hydraulic unit with 4 kW for actuating the floor flaps and pneumatic flaps for filling from above. The micl is occupied with Becker shovels, the mixer has three flanges for retrofitting knife heads / choppers. Mixer, drive unit and hydraulic unit are mounted on a stable base frame; The scope of delivery also includes another frame for spring-supported vibration reduction.

Bearing platform 4,000 x 15,000 mm, load capacity 500 kg / m2 Included in the scope of delivery are: 4 stands, one side 100 x 100 x 3 mm 4 stands, double-sided 100 x 100 x 3 mm 6Main carrier C+300 x 3 x 4,190 mm 15 cross member S+300 x 2 x 4,800 mm 30 Mounting angle 4 Cross Associations 27 chipboard P6, 3000 x 850 x 38 mm, UK white, OK natural UK white, OK nature incl. fastening material incl. load signs Dimensions, technical data Steel construction: 4,000 x 15,000 mm Floor area: approx. 60 sqm Height top edge floor covering: up to 3,500 mm freely selectable ( other heights on request ) light height underside: OK minus 338 mm Capacity: 500 kg / m2 Columns: 100 x 100 x 3 mm Main carrier: C-Profile C+300 x 3 mm Cross member: Sigma profiles S+300 x 2 mm Flooring: 38 mm chipboard, white on one side Columns in the following standard colors: Ral 7035,  ...

20ft (6m) Standard Box Container 8'6", first trip (new) manufactured according to ISO 1496-1, made of weather-resistant Corten steel, planked inside with 28mm waterproof hardwood floor, with CSC approval (5 years validity) ALSPCONTAINER® PRIME SERVICE & QUALITY In our depot in Freilassing we always have new containers in different colours and finishes in stock. This ensures a short delivery time and the possibility to visit the containers before purchase. LOOK FOR YOUR CONTAINER US! PrimeQUALITY As a very special service, we offer the option to buy a flawless first-trip container. For this purpose, transport damage is professionally repaired and dirt is removed. State As good as new / First trip â with slight traces of usage due to a one-off sea voyage Color Gentian blue RAL 5010 or subject to availability TECHNICAL DATA - Dimensions on ...

Ref.-No. 00579 Z3 Name of the plant Used intensive mixers Manufacturer Eirich Model RV15 Built in 2002 maximum filling 500l / 500kg Industry 2427-01-01-C Proppants made of bauxite "granulating" Circumferential speed 23.4 m/s Machine description Built: 2002 Wirbler drive: - V-belt standard motor - (Pen-Wirbler tool for left/ right-hand running - Armor double; 6 pins, D600) - WIRBLER TOOL IS NO LONGER AVAILABLE - Drive power: 70kW - Speed: 745 rpm - Circumferential speed: 23.4m/s Mixing container drive: - Drive via friction wheel - Drive power: 11kW - Speed: 39 rpm Floor and wall wipers: - Tool holder smoothed - Tool set with HM cutting edge Central lubrication device for ball turning connection and Wirbler storage Wear type pen-wirbler tool: (NOT MORE PRESENT) - Armor 2-fold Mixing: - Wear wall T=8mm - Wear pad T=10mm Floor and wall wiper ...

Storage Tank in AISI 304 with flat bottom 3% floor slope up and 3% floor slope down - Volume: 26.200 Litre used – in very good condition · Material: AISI 304, Side Marbled, Inside 2B = IIIC · with Manhole oval on the front withdrawn 400 x 300 mm · with fermentation lock · with ladder hook · with sample valve · with level indicator with bar and scale · with outlet discharge with angle seat valve DN 50 with cap · with clear trigger with angle seat valve DN 50 with cap Measurements and Weight: Height: 4550 mm Diameter: 2750 mm Weight: 1350 kg

-Hot air oven Torero Store 4 -for 4 sheets 60x40cm -Built in 2012 -10 kw -2 floors Matador Store 6.4 -per floor one sheet 60x40cm -Built in 2012 -per floor 6.7 kW -Base 6.4.600

Floor oven Friedrich E3 6/8 -3 floors each 60x80cm -Upper and lower heat can be controlled separately -digital control -with fermentation chamber -with exhaust hood -can be used on wheels -Floor height 13.5cm -with fermentation chamber

X working range max .: 3000 mm Y Working range max .: 1500 mm Z working range max .: 115 mm Control: Siemens Sinumerik 840 D SL Laser power: 5000 W Beam on: 29.712 h Plate thickness St. Max .: 25 mm Plate thickness Va. Max .: 20 mm Plate thickness Al. Max .: 20 mm Standard Machine Specification: Machine - working range in 3000 x 1500 mm - Closed machine - Integrated cabinet - Optional barrier-free installation - Automatic pallet changer in longitudinal direction - Torque drive in combination with direct linear drives - Enclosed beam delivery via fiber optic cable - Chiller for machine cooling - Integrated electrical cabinets with inside light - Common ON-OFF Switch for machine and laser - Conveyor belt for small parts / slug - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assem ...

Miwe Condo CO 4.0608 2D floor oven with fermentation oven BJ: 2009 Type: CO 4. 0608 2D with fermentation cabinet 4 floors for 60x80 cm sheets each 2 double-chamber floors with one controller each each floor with stone baking plates digital control Miwe FP control mobile on steering wheels Fermentation cabinet: digital control 16 editions or 8 editions for 60x40 cm sheets or for 60x80 cm sheets Dimensions: Height: 210 cm Width: 90 cm Depth: 120 cm Technical data: BJ: 2009 400/230 V 50hz 19.6 kW

MIWE Floor Furnace Thermo-Express Type: 1000/5 Number of stoves: 5 Herd dimensions/cm: 120 x 160 Two-circuit 1+2/3-5 Baking floor/m2 approx.: 10 with pull-out stove in the 1st stove 200mm with digital control MIWE-DS with standard hood and fan Built: 2000 MIWE Boiler Control Centre Type: HKZ 80 installed in the control cabinet Oil connection: rear Permissible oil temeparture: 320 °C with drain tank with frame for thermal oil containers Built: 2000

approx. 236 fields, frame height: 3m, shelves: 0,80m x 1m, – used - : Construction site price – primarily complete acceptance - : Price for complete acceptance: only 12.500.- € (net) = only 53.-€ / field, dismantled, packed and loaded! Price for partial quantities: Price per field ex location: only 75.- € (net), dismantled, packed and loaded! We reserve the right to take a minimum order! Manufacturer: unknown (probably Bito, Meta, Berger or similar) Type: unknown Year of construction: unknown Frame height: approx. 3m Shelves: 1m wide, 0.80m deep Payload per floor: unknown, but should be at least 150kg / floor 7 soils per field Available: from now on Condition: used (a bit dirty, see photos), not necessarily suitable for goods that are sensitive Location: Gau Bickelheim

Storage tanks/ stainless steel tanks without pressure Volume: 10.000 liter UNI-FIN-FOR Measurement and Weight: Diameter approx. 2.050 mm cyl. Height approx. 3.000 mm Total height with feet approx. 4.540 mm Year: 1992 Material: Stainless steel, 1.4301 Wall thicknesses: sub-floor 3 mm, cylinder + upper floor 2.5 mm Tank with conical bottom Upper body: 2 crane eyes 1 flange connection DN 65 1 ventilation nozzle DN 100 with bend Cylinder tank: 1 manhole 440 x 340 mm at the top: 1 socket ¾ " Lover bottom: 1 outlet spout with bend pulled forward NW 40 Otherwise see photos and drawing

Trolley massive stainless steel, suitable for large sterilization systems or food transport, A) 3 floors, shelves steel bottom punched, floor spacing 300mm, 1000x640x1250mm (1090mm without wheels), 5 pieces available, 650 Euro B) 3 floors, shelves fine lattice rod, floor spacing 315mm, 1000x640x1320mm (1160mm without wheels), 2 pieces available, 550 Euro

We offer you a new shelf for sale here. Particularities: - Height of the shelves can be individually adjusted - Floors can be hung at an angle (see picture material) - Castors for flexible warehousing - All castors equipped with parking brakes, thus enabling storage on inclined surfaces - Floor frame can be folded up, making room for a Euro pallet - Material surface: high-quality chrome-plated - Suitable for different industries - Easy and uncomplicated installation Technical data and further information: 01x shelf, new composed of: Total height: approx. 1,587 mm Total depth: approx. 855 mm Total width: approx. 1,310 mm Included in delivery are: 01x Floor frame, new Width: approx. 1,310 mm Depth: approx. 855 mm 01x rear wall, new incl. stabilization hooks 04x locking rollers, new incl. Allen key for installation 02x shelves, new Depth: approx. 3 ...

Capazitat 300 Tone Table size 1,500 x 1,500 mm Stosselv creation 500 - 1,000 mm Piston x 400 mm Delete. Table - Stossel Minimum: 500 mm Maximum: 1,500 mm Machine height 4,000 mm Bottom of the floor 1,000 mm Top of the floor 3,000 mm Machine Weight 18.600 kg

1500 m² mezzanine Schäfer R3000 3-storey Used goods, top condition, as good as new, see pictures Ground floor mezzanine steel construction, above 2 floor shelf system Schäfer Manufacturer SCHÄFER R3000 CAD planning and assembly 3-storey Partial sale possible Negotiation price: on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 lfm pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for or offering numerous articles from a wide variety of areas swept-clean company clearances Operational resolutions Fast- flexible - quick ...

Shelf shelves, small parts warehouse, small parts rack, storage racks, workshop shelf, plug-in shelf Data: - H : approx. 200 cm - D : approx. 60 cm - L : approx. 60 lfm Shelf offer 60 lfm consisting of: - 47 x stand approx. 200 x 60 cm. - 230 x floor approx. 127 x 60 cm. - 920 x clip for shelf - incl. 16 x cross with tensioner. - Manufacturer: Nedcon SF1 - Load: 150 kg per floor, with evenly distributed load. - Levels: 5 x storage levels. - Shelves galvanized. - Stand galvanized. - New goods from stock. - other quantities available! Due to the current situation on the steel market, fluctuating inflation surcharges can occur again and again. Therefore, if you are interested, please contact us. Price: 7888,00 € net €9386.72 gross You will receive an invoice with VAT shown.

pressure: 200 t chamfer lenght: 3000 mm distance between columns: 2560 mm dayligth: 450 mm throat: 450 mm adjustment of stroke: 240 mm horn length over column outer edge each: 175 mm table length: 3050 mm table width: 280 mm table height over floor: 820 mm electrics - voltage/frequency: 220/50 V/Hz control: CYBELEC, DNC60 stroke: 250 mm operating pressure: 150 bar total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: L:4,0 x B:3,2 x H:3,44 m • hydraulical press brake, • new control CYBELEC DNC60 (in 2005), • lower part of the machine moves down 500 mm to the floor, at the moment the machine is mounted on a double-T-support, • prism and upper part of the machine in 3000 mm length The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Shelf shelves, small parts warehouse, small parts rack, storage racks, workshop shelf, plug-in shelf Data: - H : approx. 200 cm - D : approx. 60 cm - L : approx. 100 lfm Shelf offer 100 lfm consisting of: - 78 x stand approx. 200 x 60 cm. - 385 x floor approx. 127 x 60 cm. - 1540 x clip for shelf - incl. 26 x cross with tensioner. - Manufacturer: Nedcon SF1 - Load: 150 kg per floor, with evenly distributed load. - Levels: 5 x storage levels. - Shelves galvanized. - Stand galvanized. - New goods from stock. - other quantities available! Due to the current situation on the steel market, fluctuating inflation surcharges can occur again and again. Therefore, if you are interested, please contact us. Price: 13.933,00 € net €16,580.27 gross You will receive an invoice with VAT shown. Our recommendation : Let us know your needs... We are happy to help yo ...

INTERMEDIATE SHAFT YES CONNECTING ROD N°1 Capacity: 1600 tons Slide stroke: 300 mm Slide stroke length at maximum force: 0,16 mm Distance adjustment between tableand slider: 10 mm Slide stroke number in 1 min: 75 Length of a rod: 920 mm The closed height: 660 mm Table overall dimensions: 940x1200 mm Table height above floor level: 450 mm Slide overall dimensions: 860x910 mm The size of lateral windows: -Height: 560 mm -Width: 600 mm Main motor: 110 kW Press overall dimensions: -Length: 5060 mm -Width: 3940 mm -Height above floor level: 5125 mm Press weight: 120 tons

Pink VT 1650-850-1950-14 vacuum tray dryer for a total of 42 trays/inserts with the dimensions of 500 x 800 mm (3 per shelve), usable inner dimensions of the chamber 1710 x 985 x 1950 mm (WxDxH), outer dimensions of the chamber 1940 x 1200 x 2230 mm (WxDxH), 13 shelves with the usable dimensions of 1650 x 850 x 110 mm (WxDxH), total shelf area approx. 19,6 m2, total of 14 shelves including floor, heating medium hot water, heating of the trays/inserts, floor and ceiling, maximum temperature 95 °C, maximum operating pressure vacuum chamber -1/+0.1 bar, maximum operating pressure heating system 3 bar, unladen weight approx. 3700 kg, (2 units available)

Shelf shelves, small parts warehouse, small parts rack, storage racks, workshop shelf, plug-in shelf Data: - H : approx. 200 cm - D : approx. 60 cm - L : approx. 60 lfm Shelf offer 60 lfm consisting of: - 47 x stand approx. 200 x 60 cm. - 230 x floor approx. 127 x 60 cm. - 920 x clip for shelf - incl. 16 x cross with tensioner. - Manufacturer: Nedcon SF1 - Load: 150 kg per floor, with evenly distributed load. - Levels: 5 x storage levels. - Shelves galvanized. - Stand galvanized. - New goods from stock. - other quantities available! Due to the current situation on the steel market, fluctuating inflation surcharges can occur again and again. Therefore, if you are interested, please contact us. Price: 8912,00 € net €10,605.28 gross You will receive an invoice with VAT shown.

Shelf shelves, small parts warehouse, small parts rack, storage racks, workshop shelf, plug-in shelf Data: - H : approx. 200 cm - T : approx. 40 cm - L : approx. 100 lfm Shelf offer 100 lfm consisting of: - 78 x stand approx. 200 x 40 cm. - 385 x floor approx. 127 x 40 cm. - 1540 x clip for shelf - incl. 26 x cross with tensioner. - Manufacturer: Nedcon SF1 - Load: 150 kg per floor, with evenly distributed load. - Levels: 5 x storage levels. - Shelves galvanized. - Stand galvanized. - New goods from stock. - other quantities available! Due to the current situation on the steel market, fluctuating inflation surcharges can occur again and again. Therefore, if you are interested, please contact us. Price: 11.601,00 € net €13,805.19 gross You will receive an invoice with VAT shown. Our recommendation : Let us know your needs... We are happy to help yo ...

CNC press brake make LOTZE type PZ 150Machine -No: 20327455 built in 1982 only 3200 operating hoursTechnical specifications:max.pressing force: 150 tmax.working length: 4500 mmTable width: 350 mmStand passage: 4000 mmInstallation height: 500 mmThroat: 200 mmTable height: 900 mmOpening width: 490 mmTable under the floor: 580 mmmot.backgauge: 5 - 1000 mmDownward speed idle max .: 100 mm / IUpward speed: 68.2 mm / lPress speed: 7.5 mm / lDrive power: 12.5 kWDimensions: 5400 x 2000 x 3500 mmWeight approx: 16000 kgwith- CNC control Cybelec DNC 70 (faulty) Control was retrofitted or converted in 1993- Universal die 90 x 90 divided, 4000 mm long- divided deer foot tool 4000 mm long, height 165 mm- Foot switch with two-hand release- Floor machineused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data ...

approx. 500 fields shelves, SSI Schäfer R3000, 1.30m x 0.61m, frame height up to approx. 2.28m – frame new, shelves used - : Price per field: 99.-€ (net)! We reserve a minimum purchase quantity! Manufacturer: SSI Schäfer Type: R3000, Year of manuf.: 2007, frame new! Frame height approx. 2.28m (other heights on request)! The frames are NEW Shelf dimensions in special size: 1.28 x 0.61m (normally the shelves are 0.60m deep) Field depth: 0,62m 5 shelves per field (additional floors available at extra cost) Payload per floor at least 100kg, rather 150kg per floor Side frame: open (not closed as seen in the photos) Available are: approx. 2,500 floors approx. 22,000 slip-through devices (purchase possible at an additional cost) approx. 80 shelves per pallet Condition: good Available: from now on (delivery time of the frames on request! Location: Frankenberg wa ...

Heavy-duty racks, SSI Schäfer PR600 / P93, approx. 14 linear metres, H:630cm, B-stock Data: H : approx. 630 cm D : approx. 105 cm L : approx. 14 lfm 3000 kg payload, 9000 kg field load, with uniform. distributed load. Galvanized stand, incl. truss and base plates Traverses 270cm / TRV1-270-114-30CE Traverses in blue B- Goods / 2nd choice The pre-assembly of the shelf stands can be carried out by us for an extra charge of € 12.50 net/pcs. Shelf consists of: 06 x Stand P93, approx. 630 cm x 105 cm, disassembled 30 x Traverse approx. 270cm / TRV1-270-114-30CE 60 x Safety pins results in 60 pallet spaces, incl. floor spaces Levels: Floor + 3 IN STOCK AT DIFFERENT HEIGHTS ! Price: 2580,00 € net 3070,20 € gross You will receive an invoice with VAT shown.

WASHING INSTALLATION 90° One washer to washing system to clean the containers. The containers are tilted 90 degrees and transported through a washing device. The washing device consists of a housing that contains a spray device which is suitable for cold water with a pressure of 5bar. A conveyor belt to transport the containers. After washing, the containers are tilted back to horizontal position. No recycling water included. The concrete floor must be prepared to drain the water to a certain drain pit. The best option is lower the concrete floor in the area of the washer. OVERHEAD DE/STACKER For the PLC controlled movement, stacking and destacking of empty, containers with a maximum weight of 100 kg an overhead stacker/destacker is installed. The stacker/destacker can PLC controlled take up from:
-a-        The destacking position on the buffer (this is also the  ...

approx. 100,16 running metres, H: 350cm, Compartment load: 3000 kg, pallet racks, Heavy duty racks, High racks, Industrial shelves, Shelves immediately from stock Data: H : approx. 350 cm D : approx. 110 cm L : approx. 100,16 running meters Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR35 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 37 x stand approx. 350 cm x 110 cm, disassembled. 144 x traverse approx. 270 x 14 x 5 cm, D30. 288 x locking pins. Levels: floor + 2 324 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 9800,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net ...

approx. 36,30 running meters, H: 350cm, Compartment load: 3000 kg, pallet racks, heavy duty racks, high racks, Industrial shelves, Shelves immediately from stock Data: H : approx. 350 cm D : approx. 110 cm L : approx. 36,30 m Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR35 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 14 x stand approx. 350 cm x 110 cm, disassembled. 52 x traverse approx. 270 x 14 x 5 cm, D30. 104 x locking pins. Levels: floor + 2 117 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 3620,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per piece.

Miwe Condo Shared Store Oven Type: Co 40608 2D Specifications: 4 floors / each floor 60 x 80 cm Years of construction 2008 – 2012 each floor with stone baking slabs digital Miwe FP control Can be driven on castors 2 double-chamber floors with 1 controller each with exhaust hood including exhaust engine with fermentation cabinet Condition "good" the herds have a height of 13cm 19.1 kw 400/230V 3/N/PE Outside dimensions : Width:90cm Depth:120cm Height:210cm Several in stock!

approx. 19,60 running meters, H: 350cm, compartment load: 3000 kg, pallet racks, heavy duty racks, high racks, industrial racks, shelves immediately from stock Data: H : approx. 350 cm D : approx. 110 cm L : approx. 19,60 running meters Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR35 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 08 x Stand approx. 350 cm x 110 cm, disassembled. 28 x traverse approx. 270 x 14 x 5 cm, D30. 56 x locking pins. Levels: floor + 2 63 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 2000,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per pi ...

approx. 14 running metres, H: 350cm, compartment load: 3000 kg, pallet racks, heavy duty racks, high racks, industrial racks, shelves immediately from stock Data: H : approx. 350 cm D : approx. 110 cm L : approx. 14 running metres Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR35 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 06 x Stand approx. 350 cm x 110 cm, disassembled. 20 x traverse approx. 270 x 14 x 5 cm, D30. 40 x locking pins. Levels: floor + 2 45 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1460,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per piece.

approx. 11,20 running metres, H: 350cm, compartment load: 3000 kg, pallet racks, heavy duty racks, high racks, industrial racks, shelves immediately from stock Data: H : approx. 350 cm D : approx. 110 cm L : approx. 11,20 running meters Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR35 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 05 x Stand approx. 350 cm x 110 cm, disassembled. 16 x traverse approx. 270 x 14 x 5 cm, D30. 32 x locking pins. Levels: floor + 2 36 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1190,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per pi ...

approx. 11,20 running metres, H: 350cm, compartment load: 3000 kg, pallet racks, heavy duty racks, high racks, industrial racks, shelves immediately from stock Data: H : approx. 350 cm D : approx. 110 cm L : approx. 11,20 running meters Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR35 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 05 x Stand approx. 350 cm x 110 cm, disassembled. 16 x traverse approx. 270 x 14 x 5 cm, D30. 32 x locking pins. Levels: floor + 2 36 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1190,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per pi ...

Miwe Condo Shared Store Oven Type: Co 40608 2D 4 floors / each floor 60 x 80 cm Years of construction 2008 – 2012 each floor with stone baking slabs digital Miwe FP control Can be driven on castors 2 double-chamber floors with 1 controller each with exhaust hood including exhaust engine with fermentation cabinet Condition "good" the herds have a height of 13cm 19.1 kw 400/230V 3/N/PE Outside dimensions : Width:90cm Depth:120cm Height:210cm We have about 60 pieces of these condo ovens in stock!

approx. 5.70 running metres, H: 350cm, compartment load: 3000 kg, pallet racks, heavy duty racks, high racks, industrial racks, shelves immediately from stock Data: H : approx. 350 cm D : approx. 110 cm L : approx. 5,70 m Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR35 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 03 x Stand approx. 350 cm x 110 cm, disassembled. 08 x Traverse approx. 270 x 14 x 5 cm, D30. 16 x locking pins. Levels: floor + 2 18 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 650,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per piece.

approx. 5.70 running metres, H: 450cm, Compartment load: 3000 kg, Pallet racks, Heavy duty racks, High racks, Industrial racks, Shelves immediately from stock Data: H : approx. 450 cm D : approx. 110 cm L : approx. 5,70 m Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR45 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 03 x Stand approx. 450 cm x 110 cm, disassembled. 08 x Traverse approx. 270 x 14 x 5 cm, D30. 16 x locking pins. Levels: floor + 2 18 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 740,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per piece.

approx. 8.40 running metres, H: 450cm, compartment load: 3000 kg, pallet racks, heavy duty racks, high racks, industrial racks, shelves immediately from stock Data: H : approx. 450 cm D : approx. 110 cm L : approx. 8,40 m Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR45 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 04 x Stand approx. 450 cm x 110 cm, disassembled. 12 x traverse approx. 270 x 14 x 5 cm, D30. 24 x locking pins. Levels: floor + 2 27 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1040,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per piece.

approx. 11.20 running metres, H: 450cm, compartment load: 3000 kg, pallet racks, heavy duty racks, high racks, industrial racks, shelves immediately from stock Data: H : approx. 450 cm D : approx. 110 cm L : approx. 11,20 running meters Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR45 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 05 x Stand approx. 450 cm x 110 cm, disassembled. 16 x traverse approx. 270 x 14 x 5 cm, D30. 32 x locking pins. Levels: floor + 2 36 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1340,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per pi ...

approx. 14 running metres, H: 450cm, compartment load: 3000 kg, pallet racks, heavy duty racks, high racks, industrial racks, shelves immediately from stock Data: H : approx. 450 cm D : approx. 110 cm L : approx. 14 running metres Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR45 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 06 x Stand approx. 450 cm x 110 cm, disassembled. 20 x traverse approx. 270 x 14 x 5 cm, D30. 40 x locking pins. Levels: floor + 2 45 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1640,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per piece.  ...

approx. 19.60 running metres, H: 450cm, Compartment load: 3000 kg, pallet racks, heavy duty racks, high racks, industrial shelves, shelves immediately from stock Data: H : approx. 450 cm D : approx. 110 cm L : approx. 19,60 running meters Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR45 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 08 x Stand approx. 450 cm x 110 cm, disassembled. 28 x traverse approx. 270 x 14 x 5 cm, D30. 56 x locking pins. Levels: floor + 2 63 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 2240,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per  ...

approx. 36,30 running metres, H: 450cm, Compartment load: 3000 kg, pallet racks, Heavy duty racks, High racks, Industrial shelves, Shelves immediately from stock Data: H : approx. 450 cm D : approx. 110 cm L : approx. 36,30 m Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR45 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 14 x stand approx. 450 cm x 110 cm, disassembled. 52 x traverse approx. 270 x 14 x 5 cm, D30. 104 x locking pins. Levels: floor + 2 117 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 4040,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per piece.