floor used for sale

Control: Fanuc 18i-MB Table size: 3000x2000 mm Table load: 12000 kg Number of pallets: 1 x Movement X-axis: 3230 mm Movement Y-axis: 2200 mm Movement Z-axis: 700 mm Spindle taper: MAS BT 50 Spindle Speed: 50 - 5200 1/min Spindle motor: 26/22 kW Magazin capacity: 40 Required floor space: 8130x5139 mm Height: 4000 mm Weight: 29000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralUniversal Machining Centre Vertical headstock Tool change system double gripper NC-Swivel rotary table with pallet carrier 3 pallets 500 mm x 500 mm / 19.7 in x 19.7 in T-slots according to DIN 55201-A2 linear pallet changer coolant tank 500 l / 132 gallon chip conveyor with netting band filter integrated, coolant ring jet; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmFloor space/WeightWeight approx.18300 KgDirect measuring systemDirect path measuring systemCabineFull protection cabinNC swivel rotary table with pallet carrierTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 500 KgMotor spindle 20,000 rpmMotor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000  ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)33 kWSpeed range20 - 4000 rpmC-Axis Speed-200 rpmTorque (100% DC)580 NmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of driven tools12 Shank diametre according to DIN 6988040 mmSpeed max.-4000 rpmNumber of tool stations12 Power max. (40% DC)11,3 kWFloor space/WeightWeight approx.6500 KgDimensions (L x W x H)3,99 x 2,69 x 1,99 mTechnologie cycle alternating speedTechnology cycle for the  ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTransverse stroke300 mmTurning diameter410 mmMax. Turning Length800 mmLongitudinal stroke850 mmClamping chuck diameter max.315 mmBar diameter max.65 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeWork spindle (left)Diametre of spindle nose170h5 mmSpindle noseFlat flange Spindle bore87 mmSpindle diametre on front bearing130 mmFloor space/WeightDimensions (L x W x H)4,46 x 1,88 x 2,30 mWeight approx.6500 KgTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWTechnologie cycle alternating speedTechnology cycle for the  ...

GeneralTurn- mill machining centre; Control: Siemens sl Operate3G without ShopTurn appr 2 channel Tool magazineNumber of tools38 Max. tool length250 mmMax. tool diameter70 mmMax. tool weight3 KgB-axis Turning-milling spindleSwivelling range+/- 120 degreeSpeed range B3100 rpmAngular value, min.1 degreeTurning-milling spindleSpindle taperCapto C5 Drive power (100% DC)5,5 kWSpindle speed-20000 rpmDrive power (40% DC)7,5 kWTorque (100% DC)22 NmTorque (40% DC)30 Nmangular value, min.5 degreelocking moment700 NmB-axis counter spindlePositioning angle B3-axis, in 5 degree steps0 - 225 degreeSpeed range B340 rpmSlide 3Longitudinal stroke665 mmRapid traverse Z36 m/minSlide 1Longitudinal stroke454 mmTransverse stroke380 mmRapid traverse in X40 m/minY axis, vertical+/- 105 mmRapid traverse in Z50 m/minRapid traverse in Y40 m/minHeadstock, rightClamping chuck Ø140 mmSpindle bore38 mmSpindle diametr ...

General2-Axes Universal Turning Center with driven tools, C-axis, Y-axis and counter spindle - Direct measuring system for X / Y axis; Control: DMG MORI SLIMline® multi-touch control Working areaSwing diameter over guide ways700 mmSwing diameter over transverse guideway370 mmTurning diameter400 mmBar diameter max.80 mmSlide 1Longitudinal stroke755 mmTransverse stroke276 mmY axis, vertical+/- 60 mmRapid traverse in X30 m/minRapid traverse in Z30 m/minRapid traverse in Y22,5 m/minWork spindle (left)Spindle noseA2-8 Bar diametre80 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range- 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)426 NmWork spindle (right)Spindle noseA2-6 Bar diametre50 mmSpindle diametre on front bearing100 mmMain drive 2Drive power (40% DC)14 kWD ...

Control: Fanuc-18MI Table size: 3000x1650 mm Table load: 9000 kg Number of pallets: 1 x Movement X-axis: 3230 mm Movement Y-axis: 2000 mm Movement Z-axis: 700 mm Spindle taper: MAS BT 50 Spindle Speed: 50 - 5200 1/min Spindle motor: 26/22 kW Magazin capacity: 40 Required floor space: 8130x4739 mm Height: 3800 mm Weight: 25000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General2-Axes Universal Turning Center with driven tools, C-axis, Y-axis and counter spindle - Direct measuring system for X / Y axis; Control: DMG MORI SLIMline® multi-touch control Slide 1Longitudinal stroke755 mmTransverse stroke276 mmY axis, vertical+/- 60 mmRapid traverse in X30 m/minRapid traverse in Z30 m/minRapid traverse in Y22,5 m/minWorking areaSwing diameter over transverse guideway370 mmTurning diameter400 mmSwing diameter over guide ways700 mmBar diameter max.80 mmMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range- 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)426 NmWork spindle (left)Spindle noseA2-8 Bar diametre80 mmSpindle diametre on front bearing130 mmMain drive 2Drive power (100% DC)13 kWDrive power (40% DC)14 kWSpeed range- 5000 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 N ...

Nominal effort: 630 tons Course stroke: 420 mm Number of strokes in a minute: 20 Bolster plate-to-ram adjustable stroke: 180 mm Max. distance plate-to-ram (in lower position of slider): 750 mm Slider dimensions 1000x1000 mm Table size: 1250x1250 mm Dimensions of the hole in the table 800x800mm Thickness of the sub-stamp plate 180 mm Height above floor level 600 mm Main motor power: 56 kW hydropneumatic pillow in the table Press overall dimensions: -Length: 3280 mm -Width: 3470 mm -Height: 6190 mm Press weight: 52650 kg

General2-Axes Universal Turning Center with driven tools, C-axis, Y-axis and counter spindle - Direct measuring system for X / Y axis; Control: DMG MORI SLIMline® multi-touch control Working areaSwing diameter over guide ways700 mmSwing diameter over transverse guideway370 mmBar diameter max.80 mmTurning diameter400 mmSlide 1Longitudinal stroke755 mmTransverse stroke276 mmY axis, vertical+/- 60 mmRapid traverse in X30 m/minRapid traverse in Z30 m/minRapid traverse in Y22,5 m/minMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range- 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)426 NmWork spindle (left)Spindle noseA2-8 Bar diametre80 mmSpindle diametre on front bearing130 mmWork spindle (right)Spindle noseA2-6 Bar diametre50 mmSpindle diametre on front bearing100 mmMain drive 2Drive power (100% DC)13 kW ...

General2-Axes Universal Turning Center with driven tools, C-axis, Y-axis and counter spindle - Direct measuring system for X / Y axis; Control: DMG MORI SLIMline® Multi-Touch control Working areaSwing diameter over transverse guideway370 mmSwing diameter over guide ways700 mmTurning diameter400 mmBar diameter max.80 mmSlide 1Transverse stroke276 mmLongitudinal stroke755 mmY axis, vertical+/- 60 mmRapid traverse in X30 m/minRapid traverse in Z30 m/minRapid traverse in Y22,5 m/minMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range- 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)426 NmWork spindle (left)Spindle noseA2-8 Bar diametre80 mmSpindle diametre on front bearing130 mmMain drive 2Drive power (100% DC)13 kWDrive power (40% DC)14 kWSpeed range- 5000 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 N ...

GeneralTwo- Spindle Turning Centre; Control: Sinumerik 840C Tool holder 2Shank diametre according to DIN 6988030 mmNumber of tool stations12 Number of driven tools12 Speed max.-4000 rpmPower max. (100% DC)5 kWPower max. (40% DC)6,5 kWTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (100% DC)5 kWPower max. (40% DC)6,5 kWSlide 3 (Spindle 2)Longitudinal stroke600 mmRapid traverse Z30 m/minFeed rate torque (100% DC) in Z700 daNSlide 2Longitudinal stroke555 mmTransverse stroke190 mmRapid traverse X20 m/minRapid traverse Z30 m/minSlide 1Longitudinal stroke555 mmTransverse stroke190 mmY axis, vertical+/- 40 mmRapid traverse in X20 m/minRapid traverse in Z30 m/minRapid traverse in Y7,5 m/minFeed rate torque (100% DC) in X/Y/Z400/700/700 daNMain drive 2Type of main driveAC Drive power (100% DC)14 kWDrive power  ...

120 m Shelf SSI Schaefer R3000 Used goods, very good condition, see pictures Height 2.5 m Depth 60 cm Floor length 1.28 m Ballast/compartment 100 kg Negotiation price: € 8.250,-- net from stock Offer consists of: + 93 pcs. frame pre-assembled, approx. 2.5 m high, 60 cm deep +460 pcs. shelves, 600 mm deep, 1280 mm long, 100 kg load + 30 cross braces for 1280mm floors Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 linear meters of pallet racking from numerous manufacturers. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale! See our terms and conditions, all prices excl. VAT from stock.)

connected load frequency: 230 V battery: 24V / 100Ah Brush diameter: 510 mm turning speeds: 175 U/min 0: Luft 24 L / s tank capacity: 50 / 50 Liter weight: 160 kg range L-W-H: 1,1 x 0,52 x 1,0 mm Daewoo floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank volume: 50/ 50 L The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Floor oven electric oven Wiesheu Type: EBO 3-68 Bottom heat and top heat can be individually controlled 3 jaws each 1 x 600 x 800 mm Oven mobile with locking device Exhaust hood at the top with vapour capacitor GS 5-68 Proofing cabinet below Modular system with clipboard Connection 400V, 8.1 kW, 3 x 16A-CEE plug Water connection 3/4 inch, water drain for DN 40 Dimensions: 930 x 1350 x 2100 mm, WxDxH Used oven cleaned

Model: Quail Piccolo 1-4 Electric floor stove for 4 sheets 600x800mm Stove dimensions 600x800mm / 165 mm high DMS 3 controller with Master 100 EM Hood Design fairing black Base with sheet metal shelf for sheets 600x400 Connection 400V, 17.6 kW, 4 x 16A-CEE plug Dimensions: 1170 x 1050/1500 x 2170 mm, WxDxH Oven can be driven with solid rollers Used stove

Dürr Ecoclean 79W KVI parts washer The Dürr Ecoclean KVI system enables the cleaning of a wide variety of workpieces, both in the injection/flood cleaning process and for a limited period of time in the spraying process. The KVI cleaning system is characterized by a modular design. This means that a maximum of three systems can be connected in series with this type of cleaning system. The control as well as the data entry is done via the control panel of the 1st module, the other two modules can be controlled from there. The main advantage of this modular technology is that different treatment media can be used and thus almost all surface treatments / cleanings can be carried out. Compared to conventional cleaning methods, the Dürr Ecolean KVI system achieves very good cleaning results, especially for bulk materials, workpieces with hollows, threaded holes, blind ho ...

Pallet rack, Galler, approx. 10m, or approx. 5.50m high, 1.100kg / pallet, max. 3.747 or 4.647 spaces - used - : Price for complete acceptance from site: 60.000.-€ (net), dismantled, packed and loaded! Price for partial quantities on request! For a surcharge of 11.000.-€ (net) another 80 frames with a height of approx. 12m are for sale! Manufacturer: Galler Type: 41 S Year of construction: 2008 Shelf load: 3,300kg Max. pallet weight: 1,100kg Max. usable field load: 23,100kg on floor plus 7 levels = 1.40m shelf spacing, 16,500kg at 2.25m spacing, 13,000kg at 2.25m spacing, Frame Type: 21 S Bumped / raised frame in height approx. at 5.50m. This means that you can also unscrew the frames there and then have twice as many 5.50m high frames. approx. 10m = 300 pieces Frame depth: 1.05m Frame bracing: welded Trusses Type: IPG 150 C (11.5 x 6.7cm)  ...

For sale is a complete frame sawmill as listed below. (Single sale also possible, please register in advance) An annual cut of up to 60,000 solid cubic metres of round timber is possible with the system. With a log length of 4 metres, the current annual cut is approx. 30,000 solid cubic metres in 1-shift operation. The facility is still in operation and can be visited by appointment. Machine Listing: 01. Log feed 4-strand SPRINGER with separator with roller conveyor with log turner with insert 02. Clamping carriage remotely controlled ESTERER Type: FHZ SV Built in 1990 Track width: 110 cm with auxiliary wagon with cabin 03. Frame saw ESTERER Type: HDS Built in 1973 600 stroke max. passage 71 cm with splitting wedge with drive motor 132 kW with front gear with hydraulic saw clamp with saw blades with hook-up 04. Frame roller conveyor Mayrhofer w ...

Floor oven electric oven Matadore Store Type: 6.8. M manual control Bottom heat and top heat can be individually controlled for 4 x sheets 600 x 800 mm or 8 x sheets 600 x 400 mm Stove height 17 cm all herds with steam Shelf at the bottom Base frame mobile with locking device Connection 400V, 4 x 8 kW, 4 x 16A-CEE plug Water connection 3/4 inch, water drain DN 40 Dimensions: 930x1332x1540 mm, WxDxH Used oven Visit our large Bakery Machinery Center!

GeneralTwo spindle turning/milling centre with - Main and counter spindle; Control: CELOS with Siemens 840D sl Operate Tool holder 2Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.4000 rpmPower max. (40% DC)10 kWTool magazineNumber of tools24 Max. tool length230 mmMax. tool diameter80 mmMax. tool weight7 KgTurning-milling spindleSpindle taperHSK-A 63 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22,5 kWTorque (100% DC)85 NmTorque (40% DC)120 Nmlocking moment1000 NmSwivelling range+/-110 degreeSlide 2Longitudinal stroke1200 mmTransverse stroke195 mmSlide 3Longitudinal stroke1200 mmSlide 1Longitudinal stroke1200 mmTransverse stroke490 mmY axis, vertical+/- 100 mmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWDri ...

GeneralTwo spindle turning/milling centre with - Main and counter spindle; Control: CELOS with Siemens 840D sl Operate Tool holder 2Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.4000 rpmPower max. (40% DC)10 kWTurning-milling spindleSpindle taperHSK-A 63 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22,5 kWTorque (100% DC)85 NmTorque (40% DC)120 Nmlocking moment1000 NmSwivelling range+/-110 degreeTool magazineNumber of tools24 Max. tool length230 mmMax. tool diameter80 mmMax. tool weight7 KgSlide 3Longitudinal stroke1200 mmSlide 2Longitudinal stroke1200 mmTransverse stroke195 mmSlide 1Longitudinal stroke1200 mmTransverse stroke490 mmY axis, vertical+/- 100 mmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWDri ...

GeneralTurning-milling centre - partial hollow clamping device - drawtube ID 68 mm - C-axis and spindle brake (hydraulically) - upper compound slide with turning-/ milling spindle, reception HSK-A63, DIN 69893 with 3-fold Hirth-coupling 1°-Indexing to lock the spindle during turning operations - Y-axis - B-axis interpolating with hydraulically locking - tool magazine 1 x 60-fold, shelf magazine with tool changer and handling unit, additional 4 tool loading stations; Control: Sinumerik 840D powerline Technical DataDrive power (100% DC)13,2 kWDrive power (40% DC)22 kWTorque (40% DC)100 NmSpeed range20-12000 rpmB axis, slide 1Swivelling range+/- 120 degreeSlide 3Transverse stroke1500 mmRapid traverse Z36 m/minSlide 2Longitudinal stroke1400 mmTransverse stroke225 mmRapid traverse X24 m/minRapid traverse Z40 m/minSlide 1Longitudinal stroke1585 mmTransverse stroke550 mmY axis, vertic ...

Floor No.: 3711 CNC LATHE Manuf.: GILDEMEISTER , Type: GDM 90 - MC Serial No.: 4.8164, Build: 1992 Specifications: Turning diameter 240 mm dia. Turning Length 500 mm Distance between Centres 1250 mm Main motor power 50 kw Main Spindle speed range 4000 rpm C Axis - Mainspindle Stroke 0.001 degree X Axis Stroke 215 mm Z Axis Stroke 850 mm Turret 1 with 12 Stations Turret 2 with 12 Stations Sub Spindle C Axis – Sub spindle Stroke 0.001 degree Accessories: Hydr. Chuck Mainspindle 300 mm dia Hydr. Chuck Supspindle 250 mm dia Various toolposts. Chip conveyor. Coolant. Gantry loader Length: 4850 mm + portal , Height: 2000 mm, Width: 3000 mm, Weight: 10.200 kg

GeneralUniversal Milling Machine; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal650 mmCross520 mmVertical475 mmFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgTechnical DataType of main driveAC Drive power (100% DC)30 kWDrive power (40% DC)46 kWSpeed range20 - 15000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minSpindle speed 15,000 rpm, 200NmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring sy ...

Extreme precision and rapid acceleration are two major advantages of the KR 10 R1100 Sixx. With floor, ceiling, and wall mounting options, this robot is highly versatile and can handle a wide range of applications such as: -Palletizing -Material Handling -Machine Loading -Assembly -Cutting Model: KR10 R1100 SIXX Condition: USED Reach in mm-1100 mm Payload-10 kg Year: 2015 (2014 option is also available) Controller Cabinet: KRC4 Included: Manipulator + KRC4 Control Cabin + All Wire Sets + Teach Pendant Not Included: Gripper & The Base Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs.

pressure: 80 t throat: - mm stroke: 8 - 112 mm table surface area: 830 x 550 mm no. of strokes: 30 - 85 Hub/min ram surface: 630 x 400 mm ram adjustment: 71 mm clamping plate: 990 x 550 mm table height over floor: 810 mm total power requirement: 10 kW weight of the machine ca.: 7,7 t dimensions of the machine ca.: 1,5 x 2,2 x 3,15 m Equipment: - with wheel presentation - fixed table - with roller feed, make PRESSMAC, type MAC 380 P, belt width 300 mm Selling price applies without inspection and without a test run. The machine should be partially overhauled in our house (at an additional cost) - Complete disassembly and review - livery - new control cabinet with PLC and touchscreen including cabling. Price of the machine in partially overhauled condition: € 44,000.00 Delivery time for the partially overhauled machines: by agreement The data for this ad was created with ModulMWS - the  ...

Stand:8750x1100 mm/Trusses:2300 mm/Tray load: 2.4to Technical data for the pallet racking system: Shelving system: Polypal Type: Maxipal Technical data for installation: Number of shelf rows: 01 pcs. Length per row of shelves: approx. 21,800 mm Number of fields per row of shelves: 09 pcs á 2,300 mm Number of levels plus floor level: 05 pcs. Included in delivery are: 10x pallet rack stand, used Material color: blue Stand type: MXMO 5225P Stand profile: 110 x 83 x 2.5 mm Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 8,750 mm high 1,100 mm deep 90x pallet rack trusses, used Material color: orange Box profile: 120 x 50 mm Traverse type: SKVBN11850NP22 Agraffe: 2 HK (hooks) Version: Head traverse Clear width: 2,300 mm load per pair of trusses 2,400 kg, with the same. distributed load 180x safety pins,  ...

Stand:8750x1100 mm/Trusses:2300 mm/Tray load: 2.4to Technical data for the pallet racking system: Shelving system: Polypal Type: Maxipal Technical data for installation: Number of shelf rows: 01 pcs. Length per row of shelves: approx. 142,300 mm Number of fields per row of shelves: 59 pcs á 2,300 mm Number of levels plus floor level: 05 pcs. Included in delivery are: 60x pallet rack stand, used Material color: blue Stand type: MXMO 5225P Stand profile: 110 x 83 x 2.5 mm Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 8,750 mm high 1,100 mm deep 590x pallet rack trusses, used Material color: orange Box profile: 120 x 50 mm Traverse type: SKVBN11850NP22 Agraffe: 2 HK (hooks) Version: Head traverse Clear width: 2,300 mm load per pair of trusses 2,400 kg, with the same. distributed load 1.180x safety pin ...

AGIE AGIECUT EXCELLENCE 2 wire EDM machine built in 1999 in Switzerland, is used in the production of e.g. precision dies, tools and punches. For the machining of workpieces, the machine uses advanced electrical erosion technology which makes it possible to achieve difficult shapes in even the hardest materials. The use of this method further minimises or completely eliminates the need for other secondary processes, such as polishing. The AGIE EDM machine is equipped with a state-of-the-art AGIEVISION CNC controller and brushless axis servo motors to guarantee the highest machining accuracy and precision in the shortest possible time, with low energy consumption at the same time. The machine also comes with among others an integrated generator, a semi-automatic wire threading system and the AGIESETUP 3D measuring probe for automatic detection of the plane and position of the workpiece ...

Projection: 1200 mm Drilling capacity steel: Ø 30 mm Casting drilling capacity: Ø 40 mm Spindle Mount: MK4 Spindle speeds: 1350 rpm. Clamping sleeve LxWxH: 460 x 550 x 500 mm Surface flat floor plate: 1100 x 500 mm Country of origin: Italy Machine LxWxH: 1750 x 640 x 2100 mm Machine weight: 1500 kg

table length: 1200 mm table width: 800 mm table height: 840 - 890 mm weight of the machine ca.: 0,3 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (40% DC)10 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the ap ...

Press type: PME 315 T Drive system: Eccentric Type of used tools Progressive Nominal force: 3150 kN Rating above BDC mm Material flow L->R - Maximum SPM: 75 1/min Minimum SPM: 20 1/min Maximum shut height: 525 mm Minimal shut heigh:t 325 mm Slide adjustment: 130 mm Maximum slide stroke: 210 mm Minimum slide stroke: 40 mm Bolster specification Bolster dimension: 2220 x 1225 mm T-slots in bolster: T28 H8 DIN650 - Draw cushion N/A - Draw cushion stroke: N/A mm Draw cushion force: N/A kN Draw cushon dimension: N/A mm Maximum weight: kg Ram specification Ram dimension: 2220 x 1225 mm T-slots in ram: T28 H8 DIN650 - Max. upper die weight: 3600 kg Tool manipulation Tool is manipulated by forklift - Max. tool weight: 5500 kg Forks size/pitch: 150x60/940 mm Lower die clamp height: 50 mm Upper die clamp height: 50 mm Tool locating (centering) stůl/bolster  ...

Storage platform 150 m² with pallet rack Dimensions approx. 15000 x 1000 mm (150 m²) Platform height: 4700 mm Base plate thickness: approx. 40 mm Load capacity of the floor: 500 kg/m² 800 mm deep frame for transverse storage of Euro pallets green lacquered, welded truss Very stable plug-in system Frame 4700 x 800 mm Rows of shelves: 12 x 7200 mm Shelf depth: 800 mm 6 fields per row 3 - 5 levels per field Field width: 1200 mm Steel staircase with grating steps Stair width: 1100 mm Lighting system You can find more mezzanine floors in other sizes - new and used - in our shop! International shipping costs on request!

SERGIANI 2 - Floor Continuous Press Model Leopida/Leomatic Slide-in table 6,000 mm x 1,400 mm Press 5,000 mm x 1,400 mm Discharge roller conveyor 4,000 mm x 1,400 mm

FANUC M-710iC/50 robotic welding machine is used to perform the pad welding process – coating the surface of molten workpieces with a layer of powder, in order to complete defects in the workpiece or to give it new features. The robotic welding machine includes: – FANUC M-710iC/50 robot – COHERENT HighLight D-Series 10kW laser head – COHERENT HightLight 10000D laser head controller – THERMACH INC. AT-1200 POWDER FEEDER powder feeder unit – RIEDEL chiller PC 321.2H6LE.I – rotary table, consisting of TAKOMAT RT400 turntable and FANUC motors The FANUC M-710iC welding robot is distinguished by its robust, completely water- and dust-resistant body and its compact dimensions, which allow it to be installed in any position on a limited amount of space. All this, combined with high axial speeds and a reach of 2050 mm, makes the FANUC M-710iC/50 robot perform perfectly w ...

sweeping width: 942 mm working width: Bodendüse: 700 mm tank: Reinigung: 79 l tank: Schmutzwasser: 83 l weight of the machine ca.: 145 kg dimensions of the machine ca.: 1,32 x 0,7 x 1,1 m - Exhibition machine - - Most compact ride-on scrubber-dryer from DiBO with 2 brushes - Possibility to dispense detergent: in ECO mode with constant Saving or automatic regulation of the machine depending on the speed of the machine Brush motors and suction: even less energy consumption, even more Smoothness - Display: large, multilingual, including hour counter, battery level and work programs - Memory card: allows the storage of battery charge cycles and Power consumption of the motor - CFS system: water distribution from the middle of the brush to avoid waste Avoid cleaning solution - SLS system: self-leveling electronic system to keep the brush always lies perfectly on the floor - EDD system: sucti ...

Technical data for the pallet racking system: Shelving system: Polypal Type: Stockpal Technical data for installation: Number of shelf rows: 01 pcs. Length per row of shelves: approx. 12,010 mm Number of fields / shelf row: 05 pcs á 2,300 mm Number of levels plus floor level: 02 pcs. Included in delivery are: 06x pallet rack stand, used Material colour: similar. Ral 7021 anthracite grey Stand profilem.: P 85 x 63 x 2,00 mm Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 2,000 mm high 1,100 mm deep 20x pallet rack trusses, used Material color: orange Box profile: 120 x 50 mm Traverse type: SKVBN11850NP22 Agraffe: 5 HK Clear width: 2,700 mm load per pair of trusses 2,400 kg, with the same. distributed load 40x safety pins, used Material color:  ...

YASKAWA MOTOMAN GP35L industrial robot was built in Japan in 2021. This compact machine with an extremely robust body and extended reach is ideal for a wide range of applications i.e. load handling, machine operation and grinding/polishing. Thanks to its compact size and weight, it can be installed in hard-to-reach areas in a small amount of space, reducing at the same time interference with peripheral equipment. The YASKAWA robot is additionally equipped with a MOTOMAN YRC1000 controller with the ability to use extended commands and create advanced motion functions. The offered GP35L robot is brand new and has never been used. The total weight of the machine is 600 kg. Technical specifications of the YASKAWA MOTOMAN GP35L robot - number of axes: 6 - arm reach: 2538 mm - maximum payload: 35 kg - axis motion range S axis: ± 180° L axis: +135°/-90° U axis: +206°/-80° R axi ...

Column crane, slewing crane, column slewing crane used Manufacturer: VETTER (presumably) Type: WIZARD AS10-5.0 (presumably) Year of construction 5/2006 Payload 1000 kg Swivel range 270° Projection from column: approx. 5.4 m, boom profile height approx. 37 cm Bottom edge boom to floor: approx. 3.8 m Total height: approx. 4.3 m Base plate diameter approx. 1.2 m The previous owner has mounted a smaller base plate. In order to really use the 1000 kg, a 1450 mm base plate must be mounted (as can also be seen on the type plate)

Qty. 1 Second-hand slitting line – still in operation Mfc.: BONAK Model: 1550-4-20 Built: 1990 Min-Max.Strip Width: 500 - 1.550 mm Min-Max Thickness: 0.5 - 4 mm Entry coils: 20 Tn ID: 450-650-800 mm OD: 2.000 mm Exit coils: 20 Tn ID: 508 mm OD: 2.000 mm Line speed: 0-100 mm/min Large number of knives, separators, etc.. Pass line: Right to Left Floor space required: 19 x 10.5 m

Pallet transfer station Railing lock Pallet lock for mezzanine Storage floor FROM STOCK Data: Width : approx. 170 cm Width incl. mounting : approx. 260 cm Depth : approx. 150 cm Height : approx. 220 cm Used goods from stock in blue Price per piece AVAILABLE MULTIPLE TIMES Price: 599,00 € net plus legally valid VAT You will receive an invoice with VAT.

406mm x 14mm API Pipe Mill Year New: 2006 Material Grade: X70 / X52 Pipe Diameter: 4.5" - 16" Wall Thickness: 4mm - 14mm Pipe Length: 6m - 14m Coil Width: 1350mm Coil OD: 2200mm Coil Weight: 25 ton Four (4) Entry Storage Area Floor Standing V-Type Coil Car Mandrel Uncoiler (5.5Kw Drive) Automatic Shear & End Welder Coil Straightener Horizontal Accumulator Forming Mill Six (6) Forming Stands Three (3) Side Clusters Four (4) Finn Passes 280Kw & 355Kw Forming Drives Welding Section Mechanical 4 - Roll Squeeze Box 800Kw EFD High Frequency Welder Two (2) Mid Frequency Annealing Heads Sizing Mill Four (4) Sizing Stands Two (2) Straightening Turk Heads 200Kw & 400Kw Sizing Drives Milling Flying Cut Off Rotary Double Saw Blades Diameter: 355mm Speed Accelerating System Digital Length Control Hydraulic Cut-Off Drive Mechanical Traverse Powered Run-Out  ...

We offer: Pallet rack, new 348 pitches Manufacturer: MAXRAC Specifications: The rack consists of 1 basic and 28 cultivation fields. There is space for three pallets next to each other or four pallets on top of each other, including floor space. Colours: Stand: RAL 5015 Sky Blue Trusses: RAL 2004 Pure orange Scope of delivery: 30 frames 5,700 x 1,050 mm 174 trusses 2,700 x CE130 mm 348 Locking pins 60 Ground Anchors The trusses have a usable length of 2,700 mm. The permissible shelf load is 3,100 kg (with evenly distributed load), 1,033 kg per pallet. It is a plug-in system, which means that it is very easy to install. We offer a comprehensive range of new and used shelves and accessories and are happy to assist you with your planning. Would you like a shelf installation? Please contact us. Other accessories such as: Anti-collision corn ...

INTOS FNGP 40 CNC with Heidenhain TNC124 control - strokes X/Y/Z : 600 x 400 x 400 [mm] - table dimensions : 800 x 400 [mm] - weight on table : 300 [kg] - spindle speeds : 63 - 3150 [rpm] - Spindle Power : 4 [kW] - spindle nose : ISO 40 - supply voltage : 400 [V] - installed power : 8 [kVA] - floor dimensions : 1810 x 1975 [mm] - height : 1910 [mm] - weight : 2.200 [kg]

dimensions: 900x 1200 mm Ideal as a floor for heavy duty shelving div. sizes available - 900x 1200mm - 1000x1100 mm - 1000x1200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 Edelstah silo Capacity 118m³ Ø 3,500 mm Total height approx. 15,750 mm Bulk density 1.0 t/m³ Silo stands on frame with vibra floor, airlock, a suction nozzle can be attached, Silo with filter above, see picture + drawing, entrance door, ladder, manhole, full detector Price on request Phone +49 172 8345457

Passage width 2500 mm Stroke 900 mm Total power requirement 62 kW Machine weight ca. 27,5 t Dimensions L x W x H approx. 3950 x 2200 x 4850 mm Retraction force 40 t Master cylinder 2 pieces Column diameter 220 mm Installation height 1300 mm Table size 2500 x 1600 mm Ram size 3100 x 16000 mm Table height above floor approx. 900 mm Flow speed 200 mm/sec Return speed 200 mm/sec Working speed 5 - 15 mm/sec Oil tank 1500 l Oil quantity 1200 l Pressure control adjustable from up to 50 - 400 t Thermoforming cushion 1400 x 800 mm Deep-drawing unit capacity 30 - 60 t Deep-drawing cushion stroke 250 mm Deep-drawing cushion speed 5 - 80 mm/sec robust machine body with solid welded construction low-maintenance and reliable Piston rod with induction hardening and chrome cladding T-slots according to customer requirements, if not specified 22mm according to DIN CE Certific ...

Good condition fully functional, little used. From year of construction 2016! In stock & immediately available. Operating voltage: 230 V / 50 Hz AC Total connected load: 0.72 kW Strapping cycle: approx. 2.5 sec. Weight: approx. 230 kg Polypropylene strapping: 10 – 15.5 mm wide Height: 810 mm Floor space: Depth: 630 mm Width: 1450 mm Height: 1540 mm Sheet size: W 850 x H 800 mm Price net plus VAT