floor used for sale

White SC/KWT 1000 - Test chamber volume 1000l - Test chamber dimensions height with hood: 1190mm - without hood: 740mm - Width: 1560mm - Depth: 570mm Outer dimensions: height: 1370mm, width: 920mm, depth: 800mm Brine tank: 180l Temperature range: - Salt spray test: 5K above ambient temperature up to +50°C - Condensation water test: 5K above ambient temperature up to +45°C Humidity range at SC/KWT : Room humidity/saturation Air flow rate with salt spray test 2m³/h Air flow rate for standard climates: 7m³/h Compressed air min.4bar/ max 10bar Connection 1/4 inch Connection 208-240V 2.6kV 220kg Standard Type series SC Options Type Series SC and SC/KWT Ventilation device for DIN 50 014, paragraph 5 Room tem pe - ratur (standard on SC/KWT) Desalination plant Compressed air unit Precipitation collectors Precipitation recording and display Measurin ...

General / technical data: Manufacturer: Rausch Type: RS6/1000 Year of construction: 07/2000 Machine no.: 60305 Weight: approx. 750kg Tractive force: 60kN (80kN) Clearing speed: 4m/min Return speed: 8m/min stroke: 1000mm Maximum tool length: 1200mm Maximum workpiece diameter: Ø approx. 900mm Table opening: Ø 90mm for standard clearing mandrels Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h=table height to the floor without superstructures) Current type: 400 Volt / 50Hz – 6 / 7,5kW Accessories/ Special equipment: – electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the drawbridge) – integrated coolant system with check valve and drain valve – patented coolant/lubricant swivel system (retrofitted) Remark: The machine has the manufacturer CE marking. The machine is energized in our wareho ...

1 used floor stove Winkler Columbus 10 m², 5 floors, 1.20 m x 1.60 m, overhauled, if necessary with new oil or gas burner for an additional approx. 2,800€, export price

Stainless steel container 5,000 litres, 2 chambers 50/50, 2 x lid, insulation, 2 x floor drain tap, 2 x 2,500 litres, Ca-abemssungen: length 2,900 mm, width 1,300 mm, height 1,600 mm Price ex works

- 2 fermentation tanks, Fabr. Kaspar Schulz, with á 5.005 lt. content, pressureless, standing, in VA, flat bottom tanks, coolable over 2 Frame cooling zones, with manhole in the frame below and sight glass in the frame above, with cleaning line, Sampler, outlet, conductor bracket, YOC 1997 and 1999, Ø: 1,800 mm, H: 2,650 mm, already dismantled. - 1 fermentation tank, Fabr. Kaspar Schulz, with 5,016 lt. capacity, 0.9 bar, standing, in VA, flat bottom tank, coolable over 2 Frame cooling zones and 1 floor cooling zone, with manhole in the frame below and sight glass in the frame above, with Cleaning line, sampler, spout, ladder bracket, built in 1992, already dismantled.

Wheat beer fermentation tank, Fabr. Schulz, with 55.02 hl content, standing on calotte feet, in stainless steel, coolable over 2 cooling zones in the frame, with manhole in the lower half and hefeluke with visible glass in the upper half, with spray head, pulled down cleaning line, floor display via hose and measuring rod, with sampler, ladder bracket, with spout, built in 1996

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 100 mm - B-axis ±110° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 5 bar; 20l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor - USB interface, Ethernet interface; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length750 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmC-Axis Speed-5000 rp ...

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-63A DIN 69893  ...

General Manufactured by TBMA Europe BV Type Har 200 #00271200 Key Features Material Steel Engine Nord 230/380V 055 kw Inlet diameter 200 mm Specified properties – rotary lock Material Steel Rotary lock Yes Rotor with scrapers Yes Rotor diameter 250 mm Rotor width 260 mm Number of faces 8 Compartment dimensions 100 mm x 260 mm Inlet diameter 200 mm Surface dimensions Inlet flange dimensions Ø 340 stc295 8xØ24 mm Exhaust Ø200 Exhaust flange dimensions Ø340 stc 295 8x Ø24 mm Installation height 370 mm Excluding Gaskets With Motor Yes Rotor speed 13rpm External Bearings Yes With socket gasket Yes Information Total height 370 mm Weight 160 Kg Floor area 650 mm x 650 mm Additional Specification

APPLICATIONS: - Paving manufacture - Curb manufacture - Concrete block manufacture for: - masonry - foundation - posts - floor slabs - chimneys - gutters - roadway gutter covers ADVANTEGES: - Vibrators on tamper head. - Bunker and drawer for finishing layer of paving and kerbs. - High productivity - active area 1,10 x 0,6m - Automatic operation: PLC (Mitsubishi Electric) logic programmer + touch display + software for automatic machine operation; Schneider Electric electrical command and control components - Our wide range of moulds can ensure a diversified production. - Reliable mechanical and hydraulic systems. COMPONENTS: B79qqiplcm - Press unit - Pallet space - Pallet feeding line - Hopper and drawer (1) for feeding the mould with concrete - Hopper and drawer (2) for making the finishing layer (paving, kerbs) - Pall ...

Largest workpiece diameter: ?250 mm Largest workpiece length: 150 mm Height of the workpiece spindle above the floor: 1150 mm Largest swing diameter above the table 310 mm Workpiece spindle speeds NC-programmable: 0 - 3000 rpm Table strokes: Z axes : 885 mm X axes : 300 mm Table speed infinitely adjustable: Z axes : 0 - 60 m / min X axes : 0 - 30 m / min Infeed speed infinitely variable: 0.01 - 15 mm / min Infeed depending on the stroke: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Operating voltage: 3~400 VAC/50 Hz Connected load of the machine: approx. 45 kW Control: Siemens SINUMERIK 840 D SL Compressed air connection: 30 Nm?/h-5 bar Weight: 16500 kg

Specifications Largest grindable bore: 100 mm Maximum grinding depth: 100 mm Largest workpiece diameter in chuck: 120 mm Diameter of the hollow spindle bore: 330 mm Workpiece spindle center above the floor: 1240 mm Diameter of the grinding spindle mounting blocks: 100 mm Diameter of the external and plane grinding spindle holders: 140 mm Maximum stroke of the two internal grinding machine tables Z-axes: 500 mm X-axes: 140 mm Table speed infinitely variable Z-axis: 0 - 15 m/min X-axis: 0 - 10 m/min Feed speed infinitely variable: 0.01 - 10 m/min Delivery depending on stroke: 0.0005 -0.10 mm Workpiece spindlespeeds, infinitely variable by digital drive, programmable by CNC control

Volume: 3500 L Suction: 3500 m?/h Electrical load: 136 kVA Base frame with integral floor tray according to German water Management Act Sound-insulating enclosure for 78dB(A), painted Water-tight treatment chamber of stainless steel Integrated bottom tank Oil skimmer with integrated oil seperator (bath1) Chain conveyor with cross bars and wire hooks Silhouette plates with part sensors Silhouette plates (stainless steel) for zone partition Vertical process pump Make-up water supply connection 1 Compressed-air supply connection 1 water meter and dirt trap 1 Tank level control Heating element with temprature control Drain pump unit 2 Mesh wire basket filter per bath SIEMENS S7-300 control, SIEMENS KP 700 comfort

Volume: 3500 L Suction: 3500 m?/h Electrical load: 136 kVA Base frame with integral floor tray according to German water Management Act Sound-insulating enclosure for 78dB(A), painted Water-tight treatment chamber of stainless steel Integrated bottom tank Oil skimmer with integrated oil seperator (bath1) Chain conveyor with cross bars and wire hooks Silhouette plates with part sensors Silhouette plates (stainless steel) for zone partition Vertical process pump Make-up water supply connection 1 Compressed-air supply connection 1 water meter and dirt trap 1 Tank level control Heating element with temprature control Drain pump unit 2 Mesh wire basket filter per bath SIEMENS S7-300 control, SIEMENS KP 700 comfort

Largest workpiece diameter: ?250 mm Largest workpiece length: 150 mm Height of the workpiece spindle above the floor: 1150 mm Largest swing diameter above the table 310 mm Workpiece spindle speeds NC-programmable: 0 - 3000 rpm Table strokes: Z axes : 885 mm X axes : 300 mm Table speed infinitely adjustable: Z axes : 0 - 60 m / min X axes : 0 - 30 m / min Infeed speed infinitely variable: 0.01 - 15 mm / min Infeed depending on the stroke: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Operating voltage: 3~400 VAC/50 Hz Connected load of the machine: approx. 45 kW Control: Siemens SINUMERIK 840 D SL Compressed air connection: 30 Nm?/h-5 bar Weight: 16500 kg

Volume: 3500 L Suction: 3500 m?/h Electrical load: 136 kVA Base frame with integral floor tray according to German water Management Act Sound-insulating enclosure for 78dB(A), painted Water-tight treatment chamber of stainless steel Integrated bottom tank Oil skimmer with integrated oil seperator (bath1) Chain conveyor with cross bars and wire hooks Silhouette plates with part sensors Silhouette plates (stainless steel) for zone partition Vertical process pump Make-up water supply connection 1 Compressed-air supply connection 1 water meter and dirt trap 1 Tank level control Heating element with temprature control Drain pump unit 2 Mesh wire basket filter per bath SIEMENS S7-300 control, SIEMENS KP 700 comfort

Largest workpiece diameter: ?250 mm Largest workpiece length: 150 mm Height of the workpiece spindle above the floor: 1150 mm Largest swing diameter above the table 310 mm Workpiece spindle speeds NC-programmable: 0 - 3000 rpm Table strokes: Z axes : 885 mm X axes : 300 mm Table speed infinitely adjustable: Z axes : 0 - 60 m / min X axes : 0 - 30 m / min Infeed speed infinitely variable: 0.01 - 15 mm / min Infeed depending on the stroke: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Operating voltage: 3~400 VAC/50 Hz Connected load of the machine: approx. 45 kW Control: Siemens SINUMERIK 840 D SL Compressed air connection: 30 Nm?/h-5 bar Weight: 16500 kg

Largest workpiece diameter: 150 mm Max. workpiece diameter: 250 mm Largest workpiece length: 350 mm Largest swing diameter above the table: 310 mm Height of the workpiece spindle above the floor: 1150 mm Workpiece spindle speeds NC-programmable: 0 - 3000 U/min Table strokes: Z axes : 885 mm X axes : 300 mm Table speed infinitely adjustable: Z axes : 0 - 60 m / min X axes : 0 - 30 m / min Infeed speed infinitely variable: 0.01 - 15 mm / min Infeed depending on the stroke: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Connected load of the machine: approx. 45 kW Control: Siemens SINUMERIK 840D Weight: 7500 kg

30 transport trolleys on floor trolleys As good as new, good condition, see pictures Length: 200 cm Width: 90 cm Height: 120 cm Year of construction: 2022 Dimensions work/storage area above: approx. 42 cm x 120 cm Dimensions storage area below: approx. 90 cm x 120 cm Load capacity upper level: max. 100 kg Load capacity lower level: max. 300 kg Total load: max. 500 kg incl. 4 heavy-duty swivel castors (2 of them with brake function) Negotiation price: € 490,-- net per piece ex stock Goods are in stock. Transport available on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 running meters pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices and prior sale! See our terms and conditions, all prices excl. VAT ex stock) Purchase  ...

Largest workpiece diameter: 150 mm Max. workpiece diameter: 280 mm Largest swing diameter above the table:200 mm Height of the workpiece spindle above the floor: 1250 mm Workpiece spindle speeds NC-programmable Table strokes: Z1 axis : 600 mm Z2 axis : 400 mm Z3 axis : 400 mm X1 axis : 280 mm X2 axis : 280 mm X3 axis : 280 mm Table speed infinitely adjustable: Z axes : 0 - 30 m / min X axes : 0 - 30 m / min Infeed speed infinitely variable: 0.01 - 15 mm / min Infeed depending on the stroke: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Connected load of the machine: approx. 50 kW Control: Siemens SINUMERIK 840D Weight: 9000 kg

Cold Radial Forging Machine GFM SX-10 YOM: 1971/2019 Forging Box Number of forging hammers 4 Max. forging force per hammer 1250 kN Number of strokes 1200 1/min Hammer lenght 135 mm Diameter setting range 60 mm Forge eccentric 3,5 mm Chuck head Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Workpiece rotation 35-71 1/min Workpiece lenght max. 900 mm Counter holder Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Mandrel Clamping force max. 20 kN Advance speed max. 18000 mm/min Stroke 800 mm Dimensions Lenght approx. 9100 mm Width (with electrical cabinets and control panel) approx. 4500 mm Height forging machine approx. 2150 mm Forging height above floor 1250 mm Weight (forging machine) ...

Largest workpiece diameter: 150 mm Max. workpiece diameter: 280 mm Largest swing diameter above the table:200 mm Height of the workpiece spindle above the floor: 1250 mm Workpiece spindle speeds NC-programmable Table strokes: Z1 axis : 600 mm Z2 axis : 400 mm Z3 axis : 400 mm X1 axis : 280 mm X2 axis : 280 mm X3 axis : 280 mm Table speed infinitely adjustable: Z axes : 0 - 30 m / min X axes : 0 - 30 m / min Infeed speed infinitely variable: 0.01 - 15 mm / min Infeed depending on the stroke: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Connected load of the machine: approx. 50 kW Control: Siemens SINUMERIK 840D Weight: 9000 kg

Largest workpiece diameter: 150 mm Max. workpiece diameter: 250 mm Largest workpiece length: 350 mm Largest swing diameter above the table: 310 mm Height of the workpiece spindle above the floor: 1150 mm Workpiece spindle speeds NC-programmable: 0 - 3000 U/min Table strokes: Z axes : 885 mm X axes : 300 mm Table speed infinitely adjustable: Z axes : 0 - 60 m / min X axes : 0 - 30 m / min Infeed speed infinitely variable: 0.01 - 15 mm / min Infeed depending on the stroke: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Connected load of the machine: approx. 45 kW Control: Siemens SINUMERIK 840D Weight: 7500 kg

Largest workpiece diameter: ?250 mm Largest workpiece length: 150 mm Height of the workpiece spindle above the floor: 1150 mm Largest swing diameter above the table 310 mm Workpiece spindle speeds NC-programmable: 0 - 3000 rpm Table strokes: Z axes : 885 mm X axes : 300 mm Table speed infinitely adjustable: Z axes : 0 - 60 m / min X axes : 0 - 30 m / min Infeed speed infinitely variable: 0.01 - 15 mm / min Infeed depending on the stroke: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Operating voltage: 3~400 VAC/50 Hz Connected load of the machine: approx. 45 kW Control: Siemens SINUMERIK 840 D SL Compressed air connection: 30 Nm?/h-5 bar Weight: 16500 kg

- CNC : Fanuc 32 - Number of axes : 4 - Number of spindles : 2 - Number of turrets : 2 - Spindle nose : A2-5 - Spindle power : 11 [kW] - Spindle speeds : 45 - 4.500 [rpm] - Max. chuck diameter : 165 [mm] - Number of Turret positions : 2 X 8 - X/Z stroke : 130 / 145 [mm] - Machine floor space : 3.800 x 1.875 [mm] - Machine height : 2.420 [mm] - Machine weight : 4.400 [kg] - Interface : USB / PCMCIA - Tool monitoring - Coolant tank - Chip conveyor - Workpiece loading robot : 1 - Max. workpiece weight : 2x 3,0 [kg] - Max. workpiece diameter : 120 [mm]

x-travel: 1800 mm y-travel: 1000 mm z-travel: 550 mm rapid traverse X- and Y-axis: 30 m/min rapid traverse Z-axis: 18 m/min table-size: 2000 x 1000 mm table load: 2,5 t spindle speed:: 42000 Upm no. of tools in the magazine: 36 Stück max. tool diameter: 100 mm max. tool length: 300 mm max. workpiece weight: 10 kg positioning accuracy: X: 0,009 Y/Z 0,007 mm repeating accuracy: 0,005 mm Control: Siemens total power requirement: 30 kW weight of the machine ca.: 17 t dimensions of the machine ca.: 5,77 x 6,42 x 3,43 m This product range combines dynamism with precision and enables surfaces first-class quality, especially in the 3D production of shapes / Forgings and tools. Key Features: _ Ribbed cast structure with excellent mechanical properties and high Stiffness - Excellent damping of vibrations in demanding cutting processes - Floor anchoring for long-term high geometric stability and  ...

Quail shared shop oven Type: Piccolo II-6 Floor 120x80cm DMS 3 Master Control Year of construction 2005 Electric oven 50.4kW with hood Height: 235cm Width: 155cm Depth: 130cm

28 fields pallet rack with 2 truss levels each - 29 stands / 112 trusses - Truss length 2.70 m - Load per level 2.4 tons - Shelf height: 3.50 m depth 1.10 m -Dismantled - all small parts (screws, locking pins, feet/floor plates etc.) new! Item location: Bavaria (Rosenheim area) / Germany / Hesse (Fulda area) / Germany / Tyrol /Austria Prior sale is reserved ______________________________________________________ Freight / Delivery Current non-binding estimated freight costs for the German federal territory amount to 450 euros. Delivery time up to approx. 4 weeks Shipping throughout Europe by arrangement and mail confirmation. Commercial customers from EU countries (Austria, Italy, etc.) with a corresponding VAT number (e.g. AT/IT) will each receive a net invoice. Assembly On request, we will also be happy to make you an offer for the assembly. Contact  ...

Arm length: 2200 mm Drilling capacity steel: Ø 50 mm Spindle Mounting: MK5 Spindle speeds: 30 - 2200 rpm. Spindle -> slab: 1620 mm (max) Clamping sleeve LxWxH: 480 x 820 x 550 mm Surface floor slab: 1700 x 800 mm Motor power: 6 kW Country of origin: Italy Machine LxWxH: 2760 x 1000 x 2960 mm Machine Weight: 6000 kg

Maker: SUMITOMO HEAVY INDUSTRIES (made in Japan) Model: FPA-3000 Year: 1985 (2) Capacity & main specification 1) Capacity: 3000tf 2) Ability Limit Point: 5mm 3) Allowable eccentric load: 3000tf 4) Allowable eccentric distance: L&R 350mm 5) Slide stroke: 350mm 6) Slide stroke speed: 20~50spm 7) Stroke number: 20tpm(Max) 8) Shut height: 1200mm 9) Slide adjust distance: 10mm 10) Bed hard plate dimensions: RL 1300mm x FB 1500mm 11) Slide dimensions: RL 1200mm x FB 1400mm 12) Slide knockout capacity: Total 20tf (pin number: 4ea) 13) SKO stroke: 50mm ( adjust up) 40mm ( adjust down) 14) Bottom knockout capacity: 50tf (pin number 4ea) 15) BKO stroke: 20~30mm 16) Upright internal dimensions: RL 1400mm 17) Main motor: DC 200kw x 1450rpm 440V 18) Floor height: 6800mm 19) Working height: 1030mm 20) Side opening: FB 1000mm x TB 1400mm 21) Flywheel energy: 200tf-m (50spm)  ...

Arm length: 1600 mm Drilling capacity in steel: Ø 50 mm Tapping in steel: M50 x 1.5 mm Spindle holder: MK 5 Spindle speeds: 28 - 2500 rpm. Spindle feed: 0.05 - 2 mm/rev Spindle stroke: 310 mm Spindle -> slab: 1500 mm max. Tension throwers; 1000 x 750 mm Clamping flat floor plate: 1820 x 986 mm Complete with: - Kuhlanlage - Operating instructions Spindle motor: 4 kW Country of origin: Czech Republic Machine Weight: 4300 kg Machine LxWxH: 3250 x 1120 x 3400 mm

Bread cutter Creel cutting machine floor model Model: JAC Duro Cutting thickness 9;10;11;12; Mm bread dimensions: 440 x 310 x 160 mm, WxDxH Manual conditions with crumb drawer with JAC original stainless steel knife Machine mobile with locking device DGUV V3 tested Connection 400V, 1500 Watt, 16A-CEE plug Dimensions: 663 x 760 x 1243 mm, WxDxH New machine with 24 months warranty Visit our large bakery machinery exhibition!

The scope of delivery includes: 01x stacking container, used Material color: hot-dip galvanized Total width: approx. 850 mm (outer- outdoor) Frame width: approx. 800 mm Usable width: approx. 780 mm Total height: approx. 580 mm (floor - OK crane eyelet) Frame height: approx. 540 mm Usable height: approx. 400 mm Underride height: approx. 100 mm Total depth: approx. 560 mm (outer- outdoor) Frame depth: approx. 480 mm Net depth: approx. 400 mm stackable: yes Crane eyelets: 4 pieces Diameter crane eyelets: approx. 40 mm Note: The stacking or transport containers may be bent. Furthermore, these dents, o. other have damage. The above price refers to the Pick-up price per piece!

Bread cutter Creel cutting machine floor model Model: JAC Modena + Cutting thickness 9 to 18 mm selectable bread dimensions: 440 x 300 x 160 mm, WxDxH Manual conditions with crumb drawer with JAC original stainless steel knife Machine mobile with locking device DGUV V3 tested Connection 400V, 500 Watt, 16A-CEE plug Dimensions: 689 x 745 x 1263 mm, WxDxH New machine with 24 months warranty Come to our Bakery Machinery Park!

It is an AERA slicer line for the preparation of cordon bleus. GENERAL TECHNICAL SPECIFICATIONS: - Overall dimensions of the bridge (L x W x H): 8000 x 4700 x 3800 mm. - Overall dimensions of the conveyor (L x W x H): 6400 x 1000 x 970 mm. - Overall dimensions of a slicer (L x W x H): 1880 x 1030 x 2460 mm. - Number of tracks: 4 - The maximum noise level of the line: 80 dba - Operation of the line: continuous - Capacity: 15000 products/h COMPOSITION: 1 platform with access staircase 1 packing conveyor 3 ribbon slicers suspended under the walkway 3 preparation tables on the bridge PACKING CONVEYOR - Overall dimensions (L x W x H): 6400 x 1000 x 970mm. - Weight: 970 kg - Sliding plane height: 960 +/- 50mm. - Stainless steel tubular legs and jacks - Synchronous tape width 600mm. - Lyre winding - Pneumatically operated belt quick release system Control by servo-mo ...

Heidolph Polymax 1040 with incubator 1000 and high incubation hood. Offered here is the platform shaker with tumbling movement with temperature-controllable, high incubation hood. It is a package of the following devices: - Polymax 1040 - tumbling platform shaker with 2 - 50rpm, continuous operation and timer function (max 120min) - Incubator 1000 - nominal temp display, actual temp display, adjustable temperature up to 65°C - Incubator hood, high The Polymax has a single-sided, dismountable and completely removable attachment, consisting of two vertical, screwed anchor pins and a height-adjustable, padded grab bar. The incubator hood is damaged at the left, front corner. An edged aluminum plate was glued over the damaged area and screwed into the floor. This repair is professional and not a backyard screw. I am happy to send detailed photos. The device can be vi ...

Bread cutter Creel cutting machine floor model Model: JAC ECO + M Cutting thickness 9;10;11;12; Mm bread dimensions: 440 x 310 x 160 mm, WxDxH Automatic conditions with crumb drawer Day counter, knife lubrication Reinforced engine with JAC Original Teflon Special Knife Machine mobile with locking device DGUV V3 tested Connection 400V, 1500 Watt, 16A-CEE plug Dimensions: 604 x 745 x 1240 mm, WxDxH New machine with 24 months warranty Option: - Retractable inflator - Bag holder - Special color - Black Edition - Long breads up to 600 mm ( ECO + 600 ) Visit our large bakery machinery exhibition!

Bread cutter Creel cutting machine floor model Model: JAC ECO + M Cutting thickness 9;10;11;12; Mm bread dimensions: 440 x 310 x 160 mm, WxDxH Automatic conditions with crumb drawer Trip meter with JAC original special knife Machine mobile with locking device DGUV V3 tested Connection 400V, 1500 Watt, 16A-CEE plug Dimensions: 604 x 745 x 1240 mm, WxDxH New machine with 24 months warranty Option: - Retractable inflator - Bag holder - Special color - Black Edition - Long breads up to 600 mm ( ECO + 600 ) More bakery machines can be found in our exhibition!

Format range: max. 1000 mm, min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic top gluing unit HHS X-tend, 4 channel with 2 application heads, Disc gluing unit left, feeder with vibrator, folding floor module A2 Primary crusher right and left, kicker, counter, Bobst CUBE control, additional middle transport at the top/bottom in folding, cutting alignment on the press belt, pneumatic, intermittent press belt. Overhaul 2023: cleaned, tested, painted and fitted with new feeders and Transport belts, as well as equipped with new press belts. Other: The machine can be viewed while running by appointment.

Bread cutter Creel cutting machine floor model Model: JAC Full T2 Cutting thickness 11 to 18 mm bread dimensions: 520 x 160 mm, LxW Automatic / 600 breads/hour with crumb compartment Retractable inflator with JAC original special knife Machine mobile with locking device DGUV V3 tested Connection 230 V, 500 Watt Dimensions: 844 x 1971 x 1250 mm, WxDxH New machine with 24 months warranty Option: - Loading ramp More bakery machines in stock!

Technical data for the shelving rack: Shelving system: Stow Type: Stowshelf Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 1,230 mm Number of fields / row of shelves: 01 pcs á 1,160 mm Number of levels plus floor level: 04 pcs. The scope of delivery includes: 02x Shelf stand, used Material color: sendzimir galvanized Frame profile: ASUT10 Frame profile dimensions: 35 x 50 x 1.0 mm Adjustment grid: 25 mm incl. footplates, side walls The stands are pre-assembled 2,250 mm high 600 mm deep 04x Shelves, used Material color: sendzimir galvanized Dimensions: 1,160 x 600 x 35 mm 16x Shelf supports, used Material color: sendzimir galvanized For fastening the shelves 01x Cross bandage, new Material color: sendzimir galvanized For stabilizing the shelving unit Note: The back walls which are depicted on the image ...

Technical data for the shelving rack: Shelving system: Stow Type: Stowshelf Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 2,425 mm Number of fields / row of shelves: 02 pcs á 1,160 mm Number of levels plus floor level: 04 pcs. The scope of delivery includes: 03x Shelf stand, used Material color: sendzimir galvanized Frame profile: ASUT10 Frame profile dimensions: 35 x 50 x 1.0 mm Adjustment grid: 25 mm incl. footplates, side walls The stands are pre-assembled 2,250 mm high 600 mm deep 08x Shelves, used Material color: sendzimir galvanized Dimensions: 1,160 x 600 x 35 mm 32x Rack racks, used Material color: sendzimir galvanized For fastening the shelves 01x Cross bandage, new Material color: sendzimir galvanized For stabilizing the shelving unit Note: The back walls which are depicted on the image mat ...

Bread slicer for continuous operation Creel cutting machine floor model Model: JAC Full T3 Cutting thickness 11 to 18 mm bread dimensions: 520 x 160 mm, LxW Automatic / 600 breads/hour with crumb compartment Discharge belt with JAC original special knife Machine mobile with locking device DGUV V3 tested Connection 230 V, 500 Watt Dimensions: 844 x 2266 x 1250 mm, WxDxH New machine with 24 months warranty Option: - Loading ramp

Technical data for the shelving rack: Shelving system: Stow Type: Stowshelf Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 4,815 mm Number of fields / row of shelves: 04 pcs á 1,160 mm Number of levels plus floor level: 04 pcs. The scope of delivery includes: 05x Shelf stand, used Material color: sendzimir galvanized Frame profile: ASUT10 Frame profile dimensions: 35 x 50 x 1.0 mm Adjustment grid: 25 mm incl. footplates, side walls The stands are pre-assembled 2,250 mm high 600 mm deep 16x Shelves, used Material color: sendzimir galvanized Dimensions: 1,160 x 600 x 35 mm 64x Rack racks, used Material color: sendzimir galvanized For fastening the shelves 01x Cross bandage, new Material color: sendzimir galvanized For stabilizing the shelving unit Note: The back walls which are depicted on the image mat ...

Format range: 1150 mm, min. 86 mm Equipment: Longitudinal seam, folding floor, double edge, electronic upper glue unit with 2 application heads, Disc upper glue unit, disc glue unit on the left, Pre-crusher right and left, kicker, counter, medium transport in folding, clocked press belt. Overhaul 2022: cleaned, tested, painted and equipped with new Feeder and transport belts equipped.

Technical data for the shelving rack: Shelving system: Stow Type: Stowshelf Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 17,960 mm Number of fields / row of shelves: 15 pcs. á 1,160 mm Number of levels plus floor level: 04 pcs The scope of delivery includes: 16x shelf stand, used Material color: sendzimir galvanized Frame profile: ASUT10 Frame profile dimensions: 35 x 50 x 1.0 mm Adjustment grid: 25 mm incl. footplates, side walls The stands are pre-assembled 2,250 mm high 600 mm deep 60x Shelves, used Material color: sendzimir galvanized Dimensions: 1,160 x 600 x 35 mm 240x Rack racks, used Material color: sendzimir galvanized For fastening the shelves 04x Cross bandages, new Material color: sendzimir galvanized For stabilizing the shelving unit Note: The back walls which are depicted on the image  ...

Technical data for the shelving rack: Shelving system: Stow Type: Stowshelf Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 6,010 mm Number of fields / row of shelves: 05 pcs á 1,160 mm Number of levels plus floor level: 04 pcs. The scope of delivery includes: 06x Shelf stand, used Material color: sendzimir galvanized Frame profile: ASUT10 Frame profile dimensions: 35 x 50 x 1.0 mm Adjustment grid: 25 mm incl. footplates, side walls The stands are pre-assembled 2,250 mm high 600 mm deep 20x shelf, used Material color: sendzimir galvanized Dimensions: 1,160 x 600 x 35 mm 80x Shelf support, used Material color: sendzimir galvanized For fastening the shelves 02x cross bandages, new Material color: sendzimir galvanized For stabilizing the shelving unit Note: The back walls which are depicted on the image m ...

Technical data for the shelving rack: Shelving system: Stow Type: Stowshelf Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 7,205 mm Number of fields / row of shelves: 06 pcs á 1,160 mm Number of levels plus floor level: 04 pcs. The scope of delivery includes: 07x Shelf stand, used Material color: sendzimir galvanized Frame profile: ASUT10 Frame profile dimensions: 35 x 50 x 1.0 mm Adjustment grid: 25 mm incl. footplates, side walls The stands are pre-assembled 2,250 mm high 600 mm deep 24x Shelves, used Material color: sendzimir galvanized Dimensions: 1,160 x 600 x 35 mm 96x Shelf support, used Material color: sendzimir galvanized For fastening the shelves 02x cross bandages, new Material color: sendzimir galvanized For stabilizing the shelving unit Note: The back walls which are depicted on the image ...

FEATURES: GIDDINGS & LEWIS 8000 CNC CONTROL, RETROFITTED 2000 55.12" DIAMETER FACE PLATE CHUCK WITH JAWS 16.92" DIAMETER BORING BAR BORING HEADS (2) W-AXIS POSITIONING X-AXIS TAPER FEED PRESSURE MEASURING DEVISE HARDENED & GROUND WAYS COOLANT SYSTEM WITH POLO PAPER FILTRATION PRAB CHIP CONVEYOR SYSTEM CAPACITY: MAXIMUM SWING OVER BEDWAYS 62.99" BORING DIAMETER SOLID BORING 12.4" TREPANNING 2" TO 25" COUNTER BORING WITH PILOT PRE-BORE + 25" MAXIMUM BORING DEPTH, Z-AXIS 396" LENGTH OF BED 1,176" WIDTH OF BED 39.37" MACHINE WEIGHT 180,000 LBS WORK HEADSTOCK: SPEEDS, INFINITELY VARIABLE 1.8-355 RPM SPEED RANGES 4 MAIN SPINDLE DIAMETER FRONT BEARING 11.81" MAIN SPINDLE BORE 6.4" MAXIMUM TORQUE, 31 RPM AT 180 HP 39,900 FT/LBS MAXIMUM WORKPIECE WEIGHT (1) REST 88,000 LBS MAXIMUM WORKPIECE WEIGHT (2) RESTS 110,000 LBS MAXIMUM WORKPIECE WEIGHT (3) RESTS  ...

Technical data for the shelving rack: Shelving system: Stow Type: Stowshelf Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 8,400 mm Number of fields / row of shelves: 07 pcs á 1,160 mm Number of levels plus floor level: 04 pcs. The scope of delivery includes: 08x Shelf stand, used Material color: sendzimir galvanized Frame profile: ASUT10 Frame profile dimensions: 35 x 50 x 1.0 mm Adjustment grid: 25 mm incl. footplates, side walls The stands are pre-assembled 2,250 mm high 600 mm deep 28x Shelves, used Material color: sendzimir galvanized Dimensions: 1,160 x 600 x 35 mm 112x Rack racks, used Material color: sendzimir galvanized For fastening the shelves 02x cross bandages, new Material color: sendzimir galvanized For stabilizing the shelving unit Note: The back walls which are depicted on the image m ...