floor used for sale

Your contact persons in our company: Lord: Andre Evering Lord: Mario Klöver Lord: Falk German Technical data for the pallet racking system: Shelving system: Mecalux Technical data for installation: Number of shelf rows: 01 pcs. Length per row of shelves: approx. 24,605 mm Number of fields / shelf row: 09 pcs á 2,645 mm Number of levels plus floor level: 02 pcs. Included in delivery are: 10x pallet rack stand, used Material color: blue Stand Type: M-80-P Stand profile: 80 x 69 x 1.80 mm Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 2,800 mm high 1,100 mm deep 36x pallet rack trusses, used Material color: sendzimir galvanized I-profile: 120 x 55 mm Traverse type: 2T 120 Clear width: 2,645 mm load per pair of trusses 1,500 kg, with the same. distributed load 72 ...

Technical data for the pallet racking system: Shelving system: Mecalux Technical data for installation: Number of shelf rows: 01 pcs. Length per row of shelves: approx. 30,660 mm Number of fields / row of shelves: 11 pcs á 2,700 mm Number of levels plus floor level: 02 pcs. Technical data on the volume: Pallet spaces per field: 09 pcs. Pallet spaces per row of shelves: 09 pcs. Total pallet spaces: 99 pcs. based on: Loading aids: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet ( max. ): 1,000 kg Included in delivery are: 12x pallet rack stand, used Material color: blue Stand Type: M-80-P Stand profilem.: P 80 x 69 x 1.80 mm Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 2,800 mm high 1,100 mm deep 44 ...

Format range: 680 mm, min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic upper glue HHS, 4 channels with 2 application heads, disc gluing unit on the left, Bobst CUBE control, vibrator, pre-crusher right and left, Kicker, counters, digital position indicators, additional means transport up / down in the folding station, folding floor module, pneumatic, clocked press belt. Overhaul 2021: cleaned, tested, painted, new feeder and transport belts.

Capacity: 1000 tons Stroke: 140 mm Table plate size: 910x920 mm Ram adjustment: 15 mm Main motor power: 28 kw Total power: 30 kW Dimensions (length x width x height): 2100x2500x4700 mm Height above floor: 3800 mm Total weight: 31000 kg

Blasting container for blasting glass beads, ceramic balls, grnat sand, hard cast gravel with conveying floor, abrasive preparation, blasting device, filter system. Internal dimensions L=5850 B= 2300. Side Door Open for easy loading with the forklift

We can offer Barmag FDY lines, winder model: ACW-5T, 1380mm/12 ends, hot godets model HF6, All ground floor equipments, just dismantled into warehouse.very good condition.Serious cintact us.

Blasthouse components as a kit for self-assembly or by assembly by our specialist personnel. Flat conveying floor, transverse screw conveyor, bucket elevator, wind screening, sieve, abrasive bunker, blasting device, filter system, blow-in system, suction wall and electrical control.

Blasting house with extraction floor for mineral abrasives (glass, ceramics, corundum, garnet sand and so on). Magnetic separator, cyclone, preparation, material bunker, abrasive refill, free jet pressure blower, filter system with cleaning. Lining of the walls with 4mm fabric rubber

Wiesheu shared shop oven Type: EBO 128 Year of construction 2012 4 floors a 120x80cm with lower sheet metal shelf Stainless steel side plates with hood Electric fire Per floor 10,45kW on rolls NEW STONE SLABS FLOORS REPAINTED HOOD REPAINTED COMPLETELY CLEANED INSIDE Height: 212cm Width: 150cm Depth: 100cm

Block glue press Müro 5000/A2 WT; Working width 705mm; 3x dryer; Stack increase; heat deflector; Stand-standing device. Padding press Müro 5000/A2 WT; working width 705mm; 3x dryer; pile elevation; heating sheet; floor mounted machine.

Over-drawing machine Model: IKM 220 with chocolate wheel for pastries of any kind and cakes up to a height of 10 cm Lattice band width 220 mm Capacity approx. 20 kg chocolate Belt speed infinitely adjustable Floor tuners, blowers and vibrators Run-out belt with paper roll Machine mobile Additional heating, veil box Heating oven for 1 heated tub below ( max. 30 kg ) Working direction from right to left Stainless steel Connection 220 V / 1.7 kW Used machine cleaned and tested

Table length: 6000 mm Table width: 3000 mm Longitudinal X: 6000 mm Cross Y: 3600 mm Vertical Z: 1500 mm Positions ATC: 0   CNC Brand: Heidenhain CNC Model: TNC 426 SORALUCE - FR 6000 Floor Type Milling Boring Y-Travel 3600 mm MACH - ID 6361 Make: SORALUCE Type: FR 6000 Control: HeidenHain TNC 426 YOP: 1999 X-Axis    6.000 mm Y-Axis    3.600 mm Z-Axis    1.500 mm Table Length      6.000 mm Table Width        3.000 mm Table load           20.000 kg Power on spindle       35 kW Spindle speeds           3000 Rpm Spindle Taper             50 ISO/Bt/Mk Feed rate X-Axis        12.000 mm Feed rate Y-Axis        ...

Shelf shop oven Miwe CondoManufacturer : Miwe Type : CO 4.0608 2D Year: 20094 Floors per floor 60x80cm trays or 2x 60x40cm trayswith proofing cabinetExhaust hood with steam apparatusstainless steel mobileElectricity type : 400/230V 3/N/PE 19,1kWEday height : 13cmExternal dimensions : W: 90cm D: 135cm H: 210cmFor details see picture

Table length: 2000 mm Table width: 1800 mm Table load: 12 t X - axis stroke: 125 mm MACH-id   414 MAKE       UNION Germany TYPE         Ti 1800 YEAR        80 er SPECIFICATIONS Controll        Conventionel Floor or table type borer      Rotary table X - Travel     125-0 mm Table Length x Width    2000 x 1800 mm Table load in kG     12.500 Kg Movement V Axis    1250 mm DIMENSIONS Length     3500 mm Width     2000 mm Height    1200 mm

Drilling capacity: 32 mm Drilling depth: 1000 mm Spindle taper: 40   Number of heads: 0   CNC Brand: _Unknown / Other MACH-id      4092 MAKE          Auerbach IXION TYPE            TL 1004 YEAR           2009 SPECIFICATIONS Drilling capacity     1000 mm Drilling capacity steel Ø      6 - 32 mm Drilling capacity cast iron Ø     6 - 46 mm Tapping M     M 35 Spindle taper Mk      ISO 40 Spindle travel     1000 mm Floor / table area        1200 x 700 mm Power      7.5 kW Spindle speeds / ranges       4000 Rpm DIMENSIONS Length       4000 mm Width         6600 mm Heigh ...

Ladentagegenofen Wiesheu EBOHcreator : Wiesheu Year of construction : 2009Type : EBO 68 320 IS 600 Nostalgieje etage 1 x 60x40cm sheetswith proofer on castors MobileEach floor 3N-PE AC 400/50Hz approx. 5.15kWDimensions: Width : 94cmDepth : 140cmHeight 217cmDetails see picture

Drilling capacity: 18 mm Drilling depth: 600 mm Spindle taper: 3   Number of heads: 0   MAKE   IXION Germany TYPE   TL 600 SVA 900 YEAR   1987 SPECIFICATIONS Drilling capacity    2 - 18 mm Drilling capacity steel Ø   18 mm Drilling capacity cast iron Ø  20 mm Tapping M14 Spindle taper Mk  3 Spindle travel  600 mm Floor / table area   1200 x 500 mm Power   1.1 kW Spindle speeds / ranges   4000 Rpm DIMENSIONS Length   2500 mm Width    1400 mm Height   1900 mm

Drilling capacity: 25 mm Drilling depth: 0 mm Spindle taper: 40   Number of heads: 0   MACH-id    3725 MAKE        IXION Auerbach Germany TYPE          TL 1001 YEAR         1998 SPECIFICATIONS Drilling capacity    0 - 25 mm Tapping MM 20  Spindle taper Mk   SK 40 Floor / table area     1200 x 600 mm Power     5.5 kW Spindle speeds / ranges    0 - 4000 Rpm DIMENSIONS Length    4500 mm Width     3000 mm Height    2000 mm  

Capacity: 0 t Stroke: 0 mm Distance column/center (Throat): 0 mm Technical data Length of stroke: 205 mm Depth of throat: 120 mm Spindle diameter: 32 mm Die pressure:: 700 kg Table: Diameter: 105 mm Surface on floor: Length: 245 mm Width: 100 mm Machine´s weight about: 13 kg

Drilling capacity: 25 mm Drilling depth: 0 mm Spindle taper: 40   Number of heads: 0   MAKE   IXION Auerbach TYPE     TL 1001 YEAR    1999 SPECIFICATIONS Drilling capacity   0 - 25 mm Tapping    MM 20 Spindle taper Mk   Sk 40 Floor / table area   1200 x 600 mm Power    5.5   kW Spindle speeds / ranges    100 - 4000 Rpm DIMENSIONS Length    4500 mm Width     3000 mm Height    1900 mm X : 700 Y : 400 Z : 1000 W : 1400 B : 180 Gr Load : 1000 Kg    Ixion Deep hole drilling machine

Control plansifter Rüter 4-part, 1000 mm high, Complete overhaul. Wire mesh 500 my, resopal sieve With product distributor Double bearings completely renewed, product distributor bearings and seals renewed, sieve stacks cleaned Edition with short floor nozzles without control opening

Format range: 720 mm, min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic upper glue with 2 application heads, disc glue on the left, Bobst CUBE control, vibrator & dental gauge on the feeder, Pre-crusher right and left, kicker, counter, digital position indicators, Folding floor module A2 with additional means transport above / below, additional means transport at the top / bottom of the fold, pneumatic Press belt. Overhaul 2022: cleaned, tested, painted, new Feeder and transport belts. Other: Machine can be visited by arrangement while running.

Control: REXROTH INDRAMAT System 200 BTV 20 Technical data Max. turning diameter: 200 mm Turret number of tools: 2 x 12 Max. workpiece height: 350 mm Spindle speeds: stepless up to: 8000 rpm Feeds: stepless up to: 5000 mm/min Voltage 50 Hz 3x: 400 Volt Motor power: 20 kW Machine´s weight about: 6000 kg Floor space required: Length: 3000 mm Width: 1700 mm Height: 3350 mm Various accessories: Full splash cabin

Spindle diameter: 80 mm Cross X: 1000 mm Vertical Y: 1000 mm Table length: 1100 mm Table width: 1000 mm Positions ATC: 0   Number of pallets: 0   SPECIFICATIONS Floor or table type borer  Table borer X - Travel   1000 mm Y - Travel   1000 mm Z - Travel1  600 mm Spindle Diameter Ø  80 mm Spindle Taper  Mk 5 kW power on spindle   8.5 kW Spindle speeds / ranges   1250 Rpm Table Length x Width   1100 x 1000 mm Table load in kG  1000 Kg  

Sat B2599A drawer oven 130 °C If very different products or product lines with equally different tempering times are to be treated independently of each other in the smallest space, drawer ovens are the smartest ergonomic solution. Data of the furnace Manufacturer: Sat Model: B 2599 A Type: 1000T Type: Drawer oven External dimensions of the furnace Width with control cabinet: 2500 mm Depth: 1700 mm Height: 2250 mm Usable volume in every drawer Width: 1200 mm Depth: 850 mm Height: 170 mm (measured 178 mm) Maximum working temperature: 130 °C Temperature homogeneity in usable volume, at stabilized state: +/-3°C at 80°C Frame: The basic structure consists of an unalloyed steel girder structure, on which the exterior lighting made of unalloyed steel painted in RAL 1013 (pearl white), applied. The furnace inner housing is made of aluminized sheet steel  ...

10,06 m shelving racks, 40cm deep , workshop shelves , storage racks , manual storage , plug-in racks , small parts warehouse Data: H : approx. 200 cm D : approx. 40 cm L : approx. 10,06 running meters Shelf offer 10,06 running meters consisting of: 11 x stand approx. 200 x 40 cm, disassembled (incl. 2 x stand & 2 x cover cap). 50 x base approx. 100 x 40 cm. 200 x shelf holders. 11 x diagonal 1176 mm ( for crossing ). 11 x turnbuckle (for crossing). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1241,00 € net plus leg ...

Drilling capacity: 1400 mm Drilling depth: 40 mm Spindle taper: 40   Number of heads: 0   SPECIFICATIONS Arm Length   X / Y / Z 1000 x 400 x 1000 mm Drilling capacity  W = 1400 mm Drilling capacity steel Ø 25 mm Drilling capacity cast iron Ø 40 mm Tapping MM 20 Spindle taper   Mk  Sk 40 Spindle travel Z = CNC = 1000 mm Floor / table area  1675 x 700 mm Power  5.5 kW Spindle speeds / ranges  4000 Rpm

10,06 running meters shelf racks, 60cm deep , workshop shelves , storage racks , manual storage , plug-in racks , small parts warehouse Data: H : approx. 200 cm D : approx. 60 cm L : approx. 10,06 running meters Shelf offer 10,06 running meters consisting of: 11 x stand approx. 200 x 60 cm, disassembled (incl. 2 x foot & 2 x cover cap). 50 x base approx. 100 x 60 cm. 200 x shelf holders. 11 x diagonal 1176 mm ( for crossing ). 11 x turnbuckle (for crossing). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1422,00 € net  ...

Drilling capacity: 40 mm Throat: 870 mm Spindle taper: 0   SPECIFICATIONS Drilling capacity steel Ø  35 mm Drilling capacity cast iron Ø  40 mm Tapping MM 25 Spindle taper Mk  Mk 4 Spindle diameter Ø   60 mm Spindle travel  180 mm Max. distance spindle - table  80 mm Min. distance spindle - table   870 mm Floor / table area    700 x 600 mm Power2.2 kW Spindle speeds / ranges 65 - 1750 VARIO Rpm DIMENSIONS Length  1200 mm Width  800 mm Height 2400 mm  

Table length: 6000 mm Table width: 1500 mm Longitudinal X: 5000 mm Cross Y: 1250 mm Vertical Z: 1050 mm CNC Brand: Heidenhain CNC Model: TNC 415 Floor Type Milling machine  Make Soraluce 5 Type FS 5000 Year 1992 Soraluce fs 5000 TNC 415 in 5 Axis Table length (mm) L = 6.000 Table width (mm)W = 1.500 Longitudinal X (mm)X = 5.000 Cross Y (mm)Y = 1.250 Vertical Z (mm)Z = 1.050 Index Orthogonal 3 Gr.Iso 50 / 30 kW / 100 % Chip conveyor 7000 mm  

ABB IRB 2400 M2000 robotic machining cell manufactured in 2004 in Switzerland, is equipped with an ABB IRB 2400/16 6-axis industrial robot and an ABB IRC5 controller for the control of the manipulator and peripherals. The machining station has so far been configured and used for milling of allowances after thermoforming workpieces. The high-performance milling robot has an arm with a maximum reach of 1550 mm, capable of handling workpieces weighing up to 16 kg. The industrial robot achieves the best cycle performance thanks to modern technology that automatically optimises parameters and executes the programmed path regardless of speed or operating mode, even after an emergency stop or power failure. The BaseWare OS operating system is used to fully control every aspect of the machine, ensuring the highest machining accuracy is achieved. The robotic milling station is offered with  ...

White SC/KWT 1000 - Test chamber volume 1000l - Test chamber dimensions height with hood: 1190mm - without hood: 740mm - Width: 1560mm - Depth: 570mm Outer dimensions: height: 1370mm, width: 920mm, depth: 800mm Brine tank: 180l Temperature range: - Salt spray test: 5K above ambient temperature up to +50°C - Condensation water test: 5K above ambient temperature up to +45°C Humidity range at SC/KWT : Room humidity/saturation Air flow rate with salt spray test 2m³/h Air flow rate for standard climates: 7m³/h Compressed air min.4bar/ max 10bar Connection 1/4 inch Connection 208-240V 2.6kV 220kg Standard Type series SC Options Type Series SC and SC/KWT Ventilation device for DIN 50 014, paragraph 5 Room tem pe - ratur (standard on SC/KWT) Desalination plant Compressed air unit Precipitation collectors Precipitation recording and display Measurin ...

General / technical data: Manufacturer: Rausch Type: RS6/1000 Year of construction: 07/2000 Machine no.: 60305 Weight: approx. 750kg Tractive force: 60kN (80kN) Clearing speed: 4m/min Return speed: 8m/min stroke: 1000mm Maximum tool length: 1200mm Maximum workpiece diameter: Ø approx. 900mm Table opening: Ø 90mm for standard clearing mandrels Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h=table height to the floor without superstructures) Current type: 400 Volt / 50Hz – 6 / 7,5kW Accessories/ Special equipment: – electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the drawbridge) – integrated coolant system with check valve and drain valve – patented coolant/lubricant swivel system (retrofitted) Remark: The machine has the manufacturer CE marking. The machine is energized in our wareho ...

sheet width: 3050 mm plate thickness: 6 mm distance between columns: 3100 mm back stop - adjustable: 750 mm cutting angle adjustment: 0,5 - 3,0 ° no. of strokes: 9 - 17 Hub/min table height over floor: 775 mm total power requirement: 7,5 kW weight of the machine ca.: 4,5 t dimensions of machine L x W x H: 3,75 x 1,65 x 1,7 m Accessories: electr. back stop, angle front stop, table extensions, spare knives The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 100 mm - B-axis ±110° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 5 bar; 20l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor - USB interface, Ethernet interface; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length750 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmC-Axis Speed-5000 rp ...

1 used floor stove Winkler Columbus 10 m², 5 floors, 1.20 m x 1.60 m, overhauled, if necessary with new oil or gas burner for an additional approx. 2,800€, export price

Stainless steel container 5,000 litres, 2 chambers 50/50, 2 x lid, insulation, 2 x floor drain tap, 2 x 2,500 litres, Ca-abemssungen: length 2,900 mm, width 1,300 mm, height 1,600 mm Price ex works

General Manufactured by TBMA Europe BV Type Har 200 #00271200 Key Features Material Steel Engine Nord 230/380V 055 kw Inlet diameter 200 mm Specified properties – rotary lock Material Steel Rotary lock Yes Rotor with scrapers Yes Rotor diameter 250 mm Rotor width 260 mm Number of faces 8 Compartment dimensions 100 mm x 260 mm Inlet diameter 200 mm Surface dimensions Inlet flange dimensions Ø 340 stc295 8xØ24 mm Exhaust Ø200 Exhaust flange dimensions Ø340 stc 295 8x Ø24 mm Installation height 370 mm Excluding Gaskets With Motor Yes Rotor speed 13rpm External Bearings Yes With socket gasket Yes Information Total height 370 mm Weight 160 Kg Floor area 650 mm x 650 mm Additional Specification

- 2 fermentation tanks, Fabr. Kaspar Schulz, with á 5.005 lt. content, pressureless, standing, in VA, flat bottom tanks, coolable over 2 Frame cooling zones, with manhole in the frame below and sight glass in the frame above, with cleaning line, Sampler, outlet, conductor bracket, YOC 1997 and 1999, Ø: 1,800 mm, H: 2,650 mm, already dismantled. - 1 fermentation tank, Fabr. Kaspar Schulz, with 5,016 lt. capacity, 0.9 bar, standing, in VA, flat bottom tank, coolable over 2 Frame cooling zones and 1 floor cooling zone, with manhole in the frame below and sight glass in the frame above, with Cleaning line, sampler, spout, ladder bracket, built in 1992, already dismantled.

Wheat beer fermentation tank, Fabr. Schulz, with 55.02 hl content, standing on calotte feet, in stainless steel, coolable over 2 cooling zones in the frame, with manhole in the lower half and hefeluke with visible glass in the upper half, with spray head, pulled down cleaning line, floor display via hose and measuring rod, with sampler, ladder bracket, with spout, built in 1996

30 transport trolleys on floor trolleys As good as new, good condition, see pictures Length: 200 cm Width: 90 cm Height: 120 cm Year of construction: 2022 Dimensions work/storage area above: approx. 42 cm x 120 cm Dimensions storage area below: approx. 90 cm x 120 cm Load capacity upper level: max. 100 kg Load capacity lower level: max. 300 kg Total load: max. 500 kg incl. 4 heavy-duty swivel castors (2 of them with brake function) Negotiation price: € 490,-- net per piece ex stock Goods are in stock. Transport available on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 running meters pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices and prior sale! See our terms and conditions, all prices excl. VAT ex stock) Purchase  ...

Cold Radial Forging Machine GFM SX-10 YOM: 1971/2019 Forging Box Number of forging hammers 4 Max. forging force per hammer 1250 kN Number of strokes 1200 1/min Hammer lenght 135 mm Diameter setting range 60 mm Forge eccentric 3,5 mm Chuck head Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Workpiece rotation 35-71 1/min Workpiece lenght max. 900 mm Counter holder Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Mandrel Clamping force max. 20 kN Advance speed max. 18000 mm/min Stroke 800 mm Dimensions Lenght approx. 9100 mm Width (with electrical cabinets and control panel) approx. 4500 mm Height forging machine approx. 2150 mm Forging height above floor 1250 mm Weight (forging machine) ...

APPLICATIONS: - Paving manufacture - Curb manufacture - Concrete block manufacture for: - masonry - foundation - posts - floor slabs - chimneys - gutters - roadway gutter covers ADVANTEGES: - Vibrators on tamper head. - Bunker and drawer for finishing layer of paving and kerbs. - High productivity - active area 1,10 x 0,6m - Automatic operation: PLC (Mitsubishi Electric) logic programmer + touch display + software for automatic machine operation; Schneider Electric electrical command and control components - Our wide range of moulds can ensure a diversified production. - Reliable mechanical and hydraulic systems. COMPONENTS: B79qqiplcm - Press unit - Pallet space - Pallet feeding line - Hopper and drawer (1) for feeding the mould with concrete - Hopper and drawer (2) for making the finishing layer (paving, kerbs) - Pall ...

Largest workpiece diameter: ?250 mm Largest workpiece length: 150 mm Height of the workpiece spindle above the floor: 1150 mm Largest swing diameter above the table 310 mm Workpiece spindle speeds NC-programmable: 0 - 3000 rpm Table strokes: Z axes : 885 mm X axes : 300 mm Table speed infinitely adjustable: Z axes : 0 - 60 m / min X axes : 0 - 30 m / min Infeed speed infinitely variable: 0.01 - 15 mm / min Infeed depending on the stroke: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Operating voltage: 3~400 VAC/50 Hz Connected load of the machine: approx. 45 kW Control: Siemens SINUMERIK 840 D SL Compressed air connection: 30 Nm?/h-5 bar Weight: 16500 kg

Specifications Largest grindable bore: 100 mm Maximum grinding depth: 100 mm Largest workpiece diameter in chuck: 120 mm Diameter of the hollow spindle bore: 330 mm Workpiece spindle center above the floor: 1240 mm Diameter of the grinding spindle mounting blocks: 100 mm Diameter of the external and plane grinding spindle holders: 140 mm Maximum stroke of the two internal grinding machine tables Z-axes: 500 mm X-axes: 140 mm Table speed infinitely variable Z-axis: 0 - 15 m/min X-axis: 0 - 10 m/min Feed speed infinitely variable: 0.01 - 10 m/min Delivery depending on stroke: 0.0005 -0.10 mm Workpiece spindlespeeds, infinitely variable by digital drive, programmable by CNC control

Volume: 3500 L Suction: 3500 m?/h Electrical load: 136 kVA Base frame with integral floor tray according to German water Management Act Sound-insulating enclosure for 78dB(A), painted Water-tight treatment chamber of stainless steel Integrated bottom tank Oil skimmer with integrated oil seperator (bath1) Chain conveyor with cross bars and wire hooks Silhouette plates with part sensors Silhouette plates (stainless steel) for zone partition Vertical process pump Make-up water supply connection 1 Compressed-air supply connection 1 water meter and dirt trap 1 Tank level control Heating element with temprature control Drain pump unit 2 Mesh wire basket filter per bath SIEMENS S7-300 control, SIEMENS KP 700 comfort

Volume: 3500 L Suction: 3500 m?/h Electrical load: 136 kVA Base frame with integral floor tray according to German water Management Act Sound-insulating enclosure for 78dB(A), painted Water-tight treatment chamber of stainless steel Integrated bottom tank Oil skimmer with integrated oil seperator (bath1) Chain conveyor with cross bars and wire hooks Silhouette plates with part sensors Silhouette plates (stainless steel) for zone partition Vertical process pump Make-up water supply connection 1 Compressed-air supply connection 1 water meter and dirt trap 1 Tank level control Heating element with temprature control Drain pump unit 2 Mesh wire basket filter per bath SIEMENS S7-300 control, SIEMENS KP 700 comfort

Largest workpiece diameter: ?250 mm Largest workpiece length: 150 mm Height of the workpiece spindle above the floor: 1150 mm Largest swing diameter above the table 310 mm Workpiece spindle speeds NC-programmable: 0 - 3000 rpm Table strokes: Z axes : 885 mm X axes : 300 mm Table speed infinitely adjustable: Z axes : 0 - 60 m / min X axes : 0 - 30 m / min Infeed speed infinitely variable: 0.01 - 15 mm / min Infeed depending on the stroke: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Operating voltage: 3~400 VAC/50 Hz Connected load of the machine: approx. 45 kW Control: Siemens SINUMERIK 840 D SL Compressed air connection: 30 Nm?/h-5 bar Weight: 16500 kg

Volume: 3500 L Suction: 3500 m?/h Electrical load: 136 kVA Base frame with integral floor tray according to German water Management Act Sound-insulating enclosure for 78dB(A), painted Water-tight treatment chamber of stainless steel Integrated bottom tank Oil skimmer with integrated oil seperator (bath1) Chain conveyor with cross bars and wire hooks Silhouette plates with part sensors Silhouette plates (stainless steel) for zone partition Vertical process pump Make-up water supply connection 1 Compressed-air supply connection 1 water meter and dirt trap 1 Tank level control Heating element with temprature control Drain pump unit 2 Mesh wire basket filter per bath SIEMENS S7-300 control, SIEMENS KP 700 comfort

Largest workpiece diameter: ?250 mm Largest workpiece length: 150 mm Height of the workpiece spindle above the floor: 1150 mm Largest swing diameter above the table 310 mm Workpiece spindle speeds NC-programmable: 0 - 3000 rpm Table strokes: Z axes : 885 mm X axes : 300 mm Table speed infinitely adjustable: Z axes : 0 - 60 m / min X axes : 0 - 30 m / min Infeed speed infinitely variable: 0.01 - 15 mm / min Infeed depending on the stroke: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Operating voltage: 3~400 VAC/50 Hz Connected load of the machine: approx. 45 kW Control: Siemens SINUMERIK 840 D SL Compressed air connection: 30 Nm?/h-5 bar Weight: 16500 kg