floor used for sale

Stainless steel IBC container, bulk container, capacity 750 liters Content: 750 Ltr. Operating pressure: pressureless Year built: unbek. Herst.: unbek. Material: Stainless steel 1.4301 Design: rectangular container, stackable, passable with all common forklift trucks such as forklifts and lift trucks, Dome lid 400 mm with bayonic closure in stainless steel, drain disc valve DN 250 (250 mm) in Edelstah,l with hand lever, 1" threaded connection in the upper floor last use: food Height: approx. 1,450 mm Width/depth: approx. 1,180 mm / approx. 980 mm

Used Autoclave PANZER, Type: 340E -Refurbished- Year of construction: 2016 Electric autoclave with 340 litre boiler volume, reinforced quick-release fastener and threaded spindle - Made in Germany For sterilizing, pasteurizing, preserving, cooking, curing and maturing. The complete heating, ALL wear parts, lid seal, safety valve, pressure gauge and the control system are renewed. All safety equipment is brought up to date (requirement of the Pressure Vessel Ordinance) - electrically heated - made of high-quality stainless steel - Lid with quick-release fastener - Construction inspection and pressure test by TÜV included - Incl. all required certificates - Fully automatic. Control by F-value controller - Fully automatic. Control of operating temperature, core temperature, preselection and operating time clock (side right) - Boiler capacity: 340 liters - Operating pres ...

Shredder, rotor shears, plastic shredder, garbage shredder, two-shaft shredder, two-shaft shredder, used shredder 13 knives each approx. 300 x 36 mm each shaft is driven separately Insertion approx. 1450 x 1000 mm Platform height: approx. 1000 mm Drive 11 kW and 5.5 kW, 380 V Dimensions: approx. 3500 x 2000 x 3500 mm For crushing plastic, paper, cardboard, files, canisters, cans, floor coverings and the like.

The "floor" of the dryer cooler consists of a nationwide, often special ventilation hopper system with downstream forced discharge. Depending on the customer application and products, this hopper system is additionally created with anumable fixtures. The roof-shaped design prevents the products from flowing freely. The filling and emptying of the cooler can be carried out continuously, fully automatically or in set / circulation. The standard cooler dimensions are 3x3 m and up to 18 meters high, depending on the number of superstructures, depending on the customer's requirements. for maize, cereals, rice, granules and other free-flowing products

New machine Stainless steel model 24-month warranty Benefits: + mobile machine, with locking wheels + completely made of stainless steel + Manufacture and preparation of burnt dough, baking cream, chocolate, fondant, fruit jam, coating, filling, as well as for any product that requires uniform heating and mixing + Thermal oil circulates in the double tank wall, which is designed for safe and easy use + Triple wall for optimal thermal insulation + with side and floor wipers + electronic thermostat for adjusting the cooking temperature + with timer + manual / automatic operation possible + digital temperature display + Boiler is simply tilted over crank wheel for emptying (optional: with outlet valve) + two working speeds + Safety switch in case of over-switching + fast spare parts supply within 1-2 business days SPECIAL accessories, optionally available at an additi ...

New machine Stainless steel model 24-month warranty Benefits: + mobile machine, with locking wheels + completely made of stainless steel + Manufacture and preparation of burnt dough, baking cream, chocolate, fondant, fruit jam, coating, filling, as well as for any product that requires uniform heating and mixing + Thermal oil circulates in the double tank wall, which is designed for safe and easy use + Triple wall for optimal thermal insulation + with side and floor wipers + electronic thermostat for adjusting the cooking temperature + with timer + manual / automatic operation possible + digital temperature display + Boiler is simply tilted over crank wheel for emptying (optional: with outlet valve) + two working speeds + Safety switch in case of over-switching + fast spare parts supply within 1-2 business days SPECIAL accessories, optionally available at an additi ...

New machine Stainless steel model 24-month warranty Benefits: + mobile machine, with locking wheels + completely made of stainless steel + Manufacture and preparation of burnt dough, baking cream, chocolate, fondant, fruit jam, coating, filling, as well as for any product that requires uniform heating and mixing + Thermal oil circulates in the double tank wall, which is designed for safe and easy use + Triple wall for optimal thermal insulation + with side and floor wipers + electronic thermostat for adjusting the cooking temperature + with timer + manual / automatic operation possible + digital temperature display + Boiler is simply tilted over crank wheel for emptying (optional: with outlet valve) + two working speeds + Safety switch in case of over-switching + fast spare parts supply within 1-2 business days SPECIAL accessories, optionally available at an additi ...

Storage tanks/ steel tanks/ extinguishing water tanks/ water cisterns pressureless, standing Content: 30,000 litres Available: 4 pieces UNI-OFF-FOR B. No. 20-137 GL internal epoxy resin-coated steel containers (wine tanks) Dimensions: Diameter approx. 3,000 mm Zyl. Height approx. 3,820 mm Total height with feet approx. 5,000 mm Containers with curved floors Wall thicknesses: sheath 9 mm, floors 10 mm on top floor in the middle: 1 block flange DN 50 on the coat: 1 manhole 450 x 350 swivel 1 flange trim NW 40 2 Block flanges NW 20 in the middle of the underbody: 1 block flange DN 65 otherwise according to sketch + photos

EUROLUX ZKG Tanks/ Storage Tanks / Pressure Tanks/ Beer Tanks with cone floor with cooling jacket made of V2A Max operating pressure: 0.99 bar, test pressure: 1.5 bar Content: from 200 litres to 1,000 litres Kat No. 20-00071-1L 200 litres 20-00071-2L 300 litres 20-00071-3L 400 litres 20-00071-4L 500 litres 20-00071-5L 625 litres 20-00071-6L 750 litres 20-00071-7L 1,000 litres Material: V2A - AISI 304, 1.4301 Surface: outside marbled, inside 2B=IIIC Tank upper body: with manhole lid round Ø 400 mm with 2 x handle with 6 x screws with overpressure valve (on extra charge) with downward drawn filling pipe DN 32 with fermentation connector (with overpressure valve, with manometer) with 2 x thread connection DN 50 with CIP spray head/CIP cleaning (on extra charge) with cap nut DN 50 ball Ø 25 mm with connection for cleaning supply ...

Specifications: Manufacturer: SSI Schäfer Type: Traka 14-6 Surface: Ral 5002, ultramann blue Dimensions: 600x400x120 mm Weight: approx. 2.84 kg Total quantity: approx. 2640 pcs Hole scheme: 117 Floor + all 4 side walls offset Round perforation Ø: approx. 12 mm Distance: approx. 14 mm hole center / hole center - with handles on both front sides - with folded edge Please note: These are stack boxes of second choice. There may be scratches, dirt or color defects. General information about the article: This item is offered for pickup only. A desired transport or dispatch of this article is associated with additional costs, which can be queried separately depending on the place of delivery or scope of delivery Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspecti ...

Wire EDM machine SODICK A 600 manufactured in 1997. Technical parameters of the SODICK A 600 EDM machine: - table travel (X axis): 600 mm - table travel (Y axis): 400 mm - Z axis travel: 270 mm - maximum dimensions of the processed part (width x depth x height): 800 x 550 x 260 mm - maximum weight of the workpiece: 900 - auxiliary table travel (U axis x V axis): 70 x 70 mm - wire diameter: 0.1 ~ 0.3 mm - maximum wire speed: 250 mm / sec. - wire tension: 0.2 ~ 2.8 kgf - cutting inclination at an angle: + -15 degrees per 100 mm of thickness - height from the floor to the surface of the working table: 1000 mm - machine tool dimensions (width x depth x height): 2188 x 2645 x 2100 mm - machine tool weight: 3700 kg

Specifications: Manufacturer: SSI Schäfer Type: Traka 14-6 Surface: Ral 5002, ultramann blue Dimensions: 600x400x120 mm Weight: approx. 2.84 kg Total quantity: approx. 2640 pcs Hole scheme: 117 Floor + all 4 side walls offset Round perforation Ø: approx. 12 mm Distance: approx. 14 mm hole center / hole center - with handles on both front sides - with folded edge Please note: These are stack boxes of second choice. There may be scratches, dirt or color defects. General information about the article: This item is offered for pickup only. A desired transport or dispatch of this article is associated with additional costs, which can be queried separately depending on the place of delivery or scope of delivery Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspecti ...

The monoblock F87 is an automatic intermittent movement machine that can perform three operations at the same time: a volumetric filling and two closures. Aqueous, alcoholic, sugary, foamy, viscous products can be given. Droppers, glass or plastic pipettes, nebulizers, normal or freeze-drying rubber caps can be introduced. You can apply screw caps, press caps, ferrules, PFP etc. The carter and the machine table, on which all the operating groups are fixed from the inside, are in AISI 304 stainless steel and protect the mechanical parts from the infiltration of the treated products and the water used for washing. The operating units and their supports are made of AISI 304 stainless steel and receive their motion from a single variator motor, obtaining the dual purpose of relating, without interruption, the speed of the machine with the rotation speed of the screwing or seaming, and not to ...

Freezer Viessmann Dimensions: 7800 x 5000 x 2750 mm Floor with stainless steel 150 mm 2 compressors Bitzer S4N-8.2Y-40P 2 Cuba SGLE 091 C Guntner GVH 045.1A / 2-LW. E Availability: 1 Condition: Used, good

Specifications: Manufacturer: SSI Schäfer Type: Traka 14-6 Surface: Ral 5002, ultramann blue Dimensions: 600x400x120 mm Weight: approx. 2.84 kg Total quantity: approx. 2640 pcs Hole scheme: 117 Floor + all 4 side walls offset Round perforation Ø: approx. 12 mm Distance: approx. 14 mm hole center / hole center - with handles on both front sides - with folded edge Please note: These are stack boxes of second choice. There may be scratches, dirt or color defects. General information about the article: This item is offered for pickup only. A desired transport or dispatch of this article is associated with additional costs, which can be queried separately depending on the place of delivery or scope of delivery Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspecti ...

Block glue press Müro 5000/A2 WT; Working width 705mm; 3x dryer; Stack increase; Heat guide plate; Stand unit. Padding press Müro 5000/A2 WT; working width 705mm; 3x dryer; pile elevation; heating sheet; floor mounted machine.

Technical data Table length: 760 mm Table width: 400 mm Clamping surface: Length: 600 mm Width: 320 mm T-channel width: 12H8 mm Height of table above floor: 810 mm Drill capacity in steel: 23 mm Threat cutting in steel M: 18 Drill depth (spindle stroke): 120 mm Max. distance from table to spindle nose: 110 - 570 mm Longitudinal travel (X-axis): 500 mm Transversal travel (y-axis): 300 mm Vertical travel (z axis): 460 mm Spindle speeds: stepless from: 45 rpm up to: 4000 rpm Vertical feeds: from: 0 mm/min up to: 800 mm/min Quill feed speed: number (steps): 6 from: 0.04 mm/r up to: 0.6 mm/r Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 2050 kg Overall dimensions machine: Length: 1700 mm Width: 1400 mm Height: 2100 mm Various accessories: Threading device Lamp Quick change device Set of clamping tools Digital readout number of axis:: 2 Manufacturer: ACU RITE Spindle brake Turret s ...

Drilling capacity: 32 mm Radius: 1000 mm Spindle taper: 24   MACH-id    5451 MAKE         MAS Kovosvit TYPE           VO 32 YOP             1992 SPECIFICATIONS Arm Length        1000 mm Max. drill Ø cast         40 mm Max. tap Ø        24 M Stroke pinole          250 mm Max. distance spindle - table         270 mm Min. distance spindle - table         1040 mm Floor / table area          1150 x 800 mm Speeds / ranges            4500 Rpm Spindle Taper           4 ISO/Bt/Mk Column sleeve          300 mm Power&nbs ...

Burgener ISPV-3-1100-2 semi-automatic bag welding machine for closing bags made of PE, paper or aluminium laminated, bag width max. 1050 mm, bag protrusion above product min. 120 mm, vacuuming and purging of the bags, machine in mobile execution on wheels, electrics 3x400VAC/N/PE, Leistung max. 1.5 kW, compressed air max. 6 bar, inert gas max. 4 bar, machine floor space approx. 2000 x 1590 mm (Depth x Width), machine height approx. 2400 mm, machine net weight approx. 250 kg

Drilling capacity: 40 mm Radius: 1200 mm Spindle taper: 280   MACH-id    5351 MAKE         Giovanni Breda TYPE           R 40 - 1200 YOP             1990 SPECIFICATIONS Arm Length        1200 mm Max. drill Ø stee      l40 mm Max. drill Ø cast       50 mm Max. tap Ø          M 45 M Stroke pinole         280 mm Max. distance spindle - table         450 mm Min. distance spindle - table      1330 mm Floor / table area           1960 x 840 mm Speeds / ranges         1800 Rpm Spindle Taper ISO/Bt/Mk          4  ISO/Bt/Mk Column sleeve ...

grinding diameter max.: 50 mm workpiece length: - mm table adjustment: - mm x-travel: 250 mm y-travel: 170 mm z-travel: 140 mm number of spindle speeds: 2880 rpm height over floor: 1000 mm total power requirement: 3.0 kW weight of the machine approx.: 329 kg dimension machine approx. LxWxH: 0.95 x 1.15 x 1.35 m dimension coolant device: 0.6 x 0.24 x 0.5 m transport dimensions LxWxH: 1.0 x 1.0 x 1.4 m

Drilling capacity: 50 mm Radius: 1600 mm Spindle taper: 300   MACH-id    5343 MAKE        Reform Germany TYPE          RB 16/50 YOP            2013 SPECIFICATIONS Arm Length         1600 mm Max. drill Ø steel     50 mm Max. drill Ø cast         60 mm Max. tap Ø        M 60 M Stroke pinole      300 mm Floor / table area        1750 x 980 mm Speeds / ranges        2000 Rpm Spindle Taper ISO/Bt/MkMk        5 ISO/Bt/Mk Column sleeve           280 mm Quill Ø    70 mm Power    6.5 kW DIMENSIONS Length       2400 mm Width      & ...

Pull-off trolley with pull-off machines for floor ovens metrics: 250cm Long 60cm Wide 182cm high

Drilling capacity: 60 mm Radius: 1600 mm Spindle taper: 48   MACH-id   422 MAKE        MAS Kovosvit TYPE          VO 50 YEAR          2003 SPECIFICATIONS Arm Length      1600 mm Drilling capacity     60 mm Drilling capacity steel Ø    50 mm Drilling capacity cast iron Ø   60 mm Tapping M    48 Spindle taper Mk  5 Spindle diameter Ø   55 mm Spindle travel    310 mm Floor / table area      1470 x 986 mm Power      6 kW Spindle speeds / ranges    2500 Rpm DIMENSIONS Length      2900 mm Width        1120 mm Height       3390 mm

pressure:100 t passage width:500 mm stroke:400 mm weight of the machine ca.:5 t dimensions:1300 x 2800 x 2900 mm Approaching Speed max. :90 mm/sec pressure speed:4-12 mm/sec Travel:400 mm pestle plate:700 x 500 mit T-Nuten mm table plate:700 x 500 mit T-Nuten table height over floor:850 mm Oil Tank Capacity:140 l Return Speed:100 mm/sec Main cylinder:1 Stück Cylinder diameter:220 mm Auxiliary cylinder:2 Stück Auxiliary cylinder diameter:50 x 30 mm Engine Output:11 kW pump:23 l Light sensors sick:600 + 150 mm Monitor:7 Zoll

Drilling capacity: 40 mm Throat: 300 mm Spindle taper: 3   MACH-id    4102 MAKE        IBARMIA Spain TYPE         SX 32 YEAR        1996 SPECIFICATIONS Drilling capacity      32 mm Drilling capacity steel Ø   35 mm Drilling capacity cast iron Ø   40 mm Tapping M  18 Spindle taper Mk   3 Spindle diameter Ø  125 mm Spindle travel    150 mm Max. distance spindle - table   300 mm Floor / table area    400 x 420 mm Power       1.1 kW Spindle speeds / ranges      1450 Rpm DIMENSIONS Length       600 mm Width        1100 mm Height       2200 mm

pressure:500 t passage width:1100 mm stroke:600 mm weight of the machine ca.:ca. 22,8 t Table area:1100 x 800 mm ram surface:1100 x 800 mm Daylight Opening:800 mm Hydraulic:300 bar closing speed:60-200 mm/sec pressing speed:0 - 9,5 mm/sec opening speed:28-200 mm/sec Table height above ground level:900 mm height over floor:5100 mm workpiece weight max.:2000 kg workpiece weight top:1000 kg halls height:min. 6500 mm Number of pressing cylinders:1 St. number of driving cylinders:2 St. :ca. 270 Lt./min. Oil Tank Capacity:600 l main drive:75 kW Control technology from Siemens:S 7 Safety control:PILZ Multi

pressure:110 t passage width:1500 mm stroke:650 mm total power requirement:15 kW weight of the machine ca.:11 t dimensions:ca. 2640 x 3200 x 3650 mm return capacity:11 t column diameter:120 mm Max Working height:1000 mm Table dimensions:1990 x 1000 mm Ram size:1990 x 1000 mm Drivering away pestle:650 mm table height over floor:800 mm pre-running speed:10 mm/sec Pressure Speed:10 mm/sec Oil Tank Capacity:200 l Oil cooling (electric):1,5 kW (max)

Drilling capacity: 50 mm Radius: 1600 mm Spindle taper: 0   MACH-id   3997 MAKE   MAS Kovosvit TYPE    VO 50 / 1600 YEAR    1995 SPECIFICATIONS Arm Length    1600 mm Drilling capacity   60 mm Drilling capacity steel Ø 50 mm Drilling capacity cast iron Ø  60 mm Tapping MM   50 Spindle taper Mk   5 Spindle diameter Ø  55 mm Spindle travel   310 mm Floor / table area    1470 x 986 mm Power    6 kW Spindle speeds / ranges    2500 Rpm DIMENSIONS Length   2900 mm Width    1500 mm Height   3200 mm

pressure:400 t distance between columns:3400 mm stroke:500 mm total power requirement:55 kW weight of the machine ca.:49 t draw back pressure:26 t pump capacity:131 Lt./min dimensions:7.900 x 5.500 x 4.300 mm :5000 mm :2800 mm table height over floor:700 mm distance between table / ram:1000 mm :700 l traversing speed:0-33 mm/sec. down speed:0-10 mm/sec :0-25 mm/sec.

pressure:30 t passage width:1000x1000 mm stroke:800 mm total power requirement:3 kW weight of the machine ca.:5 t dimensions of the machine ca.:3360x1300x1360 mm return capacity:3 t column diameter:75 mm traversing speed:bis 200 mm/sec. :0-10 mm/s :200 mm/sec table height over floor:900 mm distance table - lower edge of ram:1000 mm :126 mm diameter of piston:71 mm

pressure:110 t passage width:1500 mm stroke:650 mm total power requirement:15 kW weight of the machine ca.:11 t dimensions:ca. 2640 x 3200 x 3650 mm return capacity:11 t column diameter:120 mm Max Working height:1000 mm Table dimensions:1990 x 1000 mm Ram size:1990 x 1000 mm Drivering away pestle:650 mm table height over floor:800 mm pre-running speed:10 mm/sec Pressure Speed:10 mm/sec Oil Tank Capacity:200 l Oil cooling (electric):1,5 kW (max)

Spindle diameter: 100 mm Cross X: 1120 mm Vertical Y: 1250 mm Table length: 1250 mm Table width: 1250 mm Positions ATC: 0   Number of pallets: 0   MAKE   TOS Varnsdorf TYPE     H 100 A YEAR SPECIFICATIONS Controll   Conventionel Floor or table type borer      Table borer X - Travel   1120 mm Y - Travel    1250 mm Z - Travel    1250 mm W - Travel    900 mm Spindle Diameter Ø  100 mm Spindle Taper   MK 6 Spindle speeds / ranges   900 Rpm Table Length x Width    1250 x 1250 mm Table load in kG    3000 Kg DIMENSIONS Length    6000 mm Width     3700 mm Height    3000 mm TOS Varnsdorf H100A Horizontal borer

Spindle diameter: 100 mm Cross X: 1250 mm Vertical Y: 900 mm Table length: 1120 mm Table width: 1000 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: Siemens CNC Model: Sinumerik MAKE   TOS Varnsdorf TYPE    WH 10 CNC YEAR   80 er SPECIFICATIONS Controll    Siemens Sinumrik Floor or table type borer  Table borer X - Travel   1250 mm Y - Travel     900 mm Z - Travel     630 mm W - Travel   1000 mm Spindle Diameter Ø   100 mm Spindle Taper    ISO 50 kW power on spindle   30 kW Spindle speeds / ranges    1300 Rpm Table Length x Width    1120 x 1000 mm Table load in kG    3000 Kg Number off controlled axis    4 DIMENSIONS Length    4500 mm Width      3800  ...

pressure:160 t passage width:1200 mm stroke:600 mm Weight of machine approx.:7 t dimensions:ca. 2400 x 1400 x 3400 mm return capacity:16 t Max Working height:800 mm Return Speed:25 mm/sec pestle plate:1670 x 800 mm table plate:1670 x 800 mm table height over floor:800 mm Oil cooling (electric):1,5 kW (max) Engine Output:18 kW speed of forward flow:10 mm/sec pressure speed:10 mm/sec Travel:600 mm Oil Tank Capacity:300 l

Spindle diameter: 130 mm Cross X: 1800 mm Vertical Y: 1700 mm Table length: 1400 mm Table width: 1120 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: Heidenhain CNC Model: TNC 415 MAKE    WOTAN Spain TYPE     CUTMAX 2 YEAR     1995 SPECIFICATIONS Controll     HeidenHain TNC 415 Floor or table type borer    Table type borer X - Travel    1800 mm Y - Travel    1700 mm Z - Travel       600 mm W - Travel    1500 mm Spindle Diameter Ø   130 mm Spindle Taper    ISO 50 kW power on spindle  30 kW Spindle speeds / ranges   0 - 3000 Rpm Table Length x Width     1400 x 1120 mm Table load in kG     6000 Kg Number off controlled axis   5 DIMENSIONS Length  &nbs ...

pressure:110 t passage width:1300 mm stroke:1500 mm Weight of machine approx.:12 t dimensions:ca. 2300 x 2090 x 4200 mm return capacity:11 t Max Working height:1500 mm pestle plate:1730 x 1100 mm table plate:1730 x 1100 mm table height over floor:700 mm column diameter:140 mm Thickness of ram plate:100 mm thickness of clamping plate:100 mm Noise Level (Max.):67 dB Color machine body:7035 RAL Color moving parts:2009 RAL Colour other components:7021 RAL Colour of balcony and casing:1021 RAL motor capacity:18 kW Approaching Speed max. :300 mm/sec pressure speed:15 mm/sec Oil Tank Capacity:150 l Siemens Control System:S7 1200

pressure:40 t passage width:850 mm stroke:500 mm Weight of machine approx.:ca. 3,8 t dimensions:ca.1300 x 1800 x 3200 mm return capacity:4 t pestle plate:600 x 450 mm table plate:750 x 720 mm table height over floor:850 mm Oil cooling (electric):1,5 kW (max) max. working heidht:700 mm motor capacity:12,7 kW Approaching Speed max. :140 mm/sec pressure speed:15 mm/sec Return Speed:140 mm/sec Oil Tank Capacity:160 l Monitor:WEG - 10 Zoll Siemens Control System:S7 1200

Spindle diameter: 130 mm Cross X: 2000 mm Vertical Y: 1600 mm Table length: 1400 mm Table width: 1120 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: Siemens CNC Model: 840 D - 5 Axis MAKE   WOTAN Germany TYPE     Rapid 2 YEAR    200. SPECIFICATIONS Controll    Siemens 840D - 5 Axis Floor or table type borer    Table type borer X - Travel    2000 mm Y - Travel    1600 mm Z - Travel      800 mm W - Travel    1000 mm Spindle Diameter Ø    130 mm Spindle Taper    ISO 50 kW power on spindle    40 kW Spindle speeds / ranges   2000 Rpm Table Length x Width     1400 x 1120 mm Table load in kG     6000 Kg Number off controlled axis   5 DIMENSIONS Length    5000 ...

pressure:1000 t passage width:1500 mm stroke:800 mm total power requirement:91 kW weight of the machine ca.:68 t dimensions:3850 x 2900 x 6000 mm return capacity:100 t Table dimensions:1500 x 2250 mm :1500 x 2250 mm table height over floor:1300 mm pre-running speed:200 mm/sec return speed:200 mm/sec Pressure Speed:10 mm/sec :1200 l Oil cooling (electric):1,5 kW (max) Max Working height:1000 mm :200 mm/sec Monitor:12 Zoll

pressure:160 t passage width:1000 mm stroke:800 mm total power requirement:22 kW weight of the machine ca.:13 t dimensions:2300 x 2850 x 4000 mm return capacity:16 t Table dimensions:1430 x 1000 mm :1430 x 1000 mm table height over floor:850 mm pre-running speed:200 mm/sec return speed:200 mm/sec Pressure Speed:15 mm/sec :400 l Oil cooling (electric):1,5 kW (max) Max Working height:1000 mm :200 mm/sec Monitor:10 Zoll

pressure:100 t passage width:650 mm stroke:500 mm weight of the machine ca.:10 t dimensions:4800 x 1300 x 2650 mm return capacity:10 t :29 kW Max Working height:1000 mm :10 mm :10 mm/sec. :500 mm pestle plate:600 x 600 mm table plate:600 x 600 mm table height over floor:700 mm :600 l speed rapid traverse:10 mm/sec Oil cooling (electric):1,5 kW (max) Monitor SIEMENS:7 Zoll

pressure:40 t passage width:1000 mm stroke:400 mm Weight of machine approx.:3,5 t dimensions:2065 x 700 x 2905 mm return capacity:4 t Max Working height:700 mm Return Speed:25 mm/sec pestle plate:1320 x 600 mm table plate:1320 x 600 mm table height over floor:750 mm Oil cooling (electric):1,5 kW (max) Engine Output:8 kW speed of forward flow:10 mm/sec pressure speed:10 mm/sec Oil Tank Capacity:200 l speed rapid traverse:10 mm/sec column diameter:100 mm :2400 ? Maintenance Balcony:3600 ? :4600 ? Ground tub of lacquered steel:850

Spindle diameter: 50 mm Cross X: 3000 mm Vertical Y: 2000 mm Table length: 1400 mm Table width: 1400 mm Positions ATC: 60   Number of pallets: 0   CNC Brand: Heidenhain CNC Model: iTNC 530 Controll  iTNC 530 Floor or table type borer   Table borer   X - Travel   3000 mm Y - Travel   2000 mm Z - Travel  1000 mm W - Travel   700 mm Spindle Diameter Ø  150 mm Spindle Taper  Iso 50 kW power on spindle  30 kW Spindle speeds / ranges  2200 Rpm Table Length x Width   1400 x 1400 mm Table load in kG  5000 Kg ATC tool changer  60 Coolant true spindle / Bar  60 Bar Number off controlled axis  5    

pressure:350 t passage width:3000 mm stroke:900 mm total power requirement:75 kW weight of the machine ca.:60 t dimensions:2660 x 5400 x 5700 mm return capacity:35 t Table dimensions:3610 x 1600 mm :3610 x 1600 mm table height over floor:900 mm pre-running speed:230 mm/sec return speed:170 mm/sec :2000 l max. working heidht:1700 mm pressure speed:21 mm/sec speed rapid traverse:200 mm/sec Oil cooling (electric):3 kW (max) :S7 1500 Monitor:WEG 12 Zoll

pressure:20 t passage width:1500 mm stroke:500 mm total power requirement:3 kW weight of the machine ca.:6,5 t dimensions:ca. 2700 x 1700 x 2700 mm Max Working height:1500 mm return capacity:2 t Table dimensions:1500 x 2100 mm :1500 x 2100 mm table height over floor:900 mm pre-running speed:10 mm/sec pressure speed:10 mm/sec return speed:25 mm/sec speed rapid traverse:10 mm/sec :150 l :AW46 Monitor:(WEG) 7 Zoll

pressure:110 t stroke:400 mm weight of the machine ca.:4,5 t dimensions:ca. 1650 x 1150 x 2800 mm return capacity:11 t total power requirement:11 kW Max Working height:500 mm :10 mm :10 mm/sec. speed rapid traverse:10 mm/sec :400 mm pestle plate:600 x 500 mm table plate:800 x 700 mm Table cut-out:150 x 150 mm table height over floor:900 mm :250 l Monitor SIEMENS:7 Zoll Side trim:2.800,- ? :4.800,- ? Light barriers front and back:2.400,- ?

Specifications Bore grinding range: 5 - 100 mm Greatest Workpiece Depth: 150 mm Largest external machining diameter: 200 mm Largest swing diameter over the table: 310 mm Height workpiece spindle over the floor: 1150 mm Workpiece spindle speeds NC ? programmable: 0-3000 U/min Table ranges: Z-Axis: 300 mm X-Axis: 1050 mm Table speed infinitely adjustable. Z-Axis: 0-30 m/min X-Axis: 0-90 m/min Starting speed infinitely adjustable: 0.01 - 10 mm/min Start depending on the course: 0.0005 -0.1 mm Workpiece spindle drilling: ? 45 mm Receiving bore of the workpiece spindle: ? 62 mm Workpiece Spindle Flange Diameter: ? 220 mm Workpiece spindle positioning C-Axis Boring Grinding Spindle Stick: ? 120 mm Diamond-Training roller: ? 310 mm Connection power: Approx. 40 kW Weight of the machine: Approx. 7000 kg

pressure:20 t passage width:500 mm stroke:250 mm Weight of machine approx.:2,6 t dimensions:1200 x 1400 x 2900 mm power capacity:11 kW table plate:450 x 400 mm Table cut-out:150 x 150 mm table height over floor:900 mm max. working heidht:500 mm Return Capacity:2 t Approach Speed:300 mm/sec pressure speed:50 mm/sec speed rapid traverse:300 mm/sec Travel:250 mm Oil Tank Capacity:250 l Oil cooling (electric):1,5 kW (max) Monitor:Siemens 10 Zoll

Specifications Bore grinding range: 5 - 100 mm Greatest Workpiece Depth: 150 mm Largest external machining diameter: 200 mm Largest swing diameter over the table: 310 mm Height workpiece spindle over the floor: 1150 mm Workpiece spindle speeds NC ? programmable: 0-3000 U/min Table ranges: Z-Axis: 300 mm X-Axis: 1050 mm Table speed infinitely adjustable. Z-Axis: 0-30 m/min X-Axis: 0-90 m/min Feed speed infinitely adjustable: 0.01 - 10 mm/min Feed depending on the course: 0.0005 -0.1 mm Workpiece spindle drilling: ? 45 mm Receiving bore of the workpiece spindle: ? 62 mm Workpiece Spindle Flange Diameter: ? 220 mm Workpiece spindle positioning C-Axis Boring Grinding Spindle Stick: ? 120 mm Diamond-Training roller: ? 310 mm Connection power: Approx. 40 kW Weight of the machine: Approx. 7000 kg