floor type boring used for sale

Contents consisting of concrete plywood plate, stainless steel poles, power tools, racks, gas cylinder trolleys, etc. Auction-ID: A1-49846-155

unused; in cardboard box; Battery voltage: 24 V; Power: 550 W; Continuous working time: 4-5 hours ; Clean water tank: 45 L Capacity; waste water tank: 50 L; Cleaning efficiency: 2500 m²/h ; Suction diameter: 830 mm ; Brush pressure: 30 kg ; Suction power: 12 KPa ; IP degree: IPX4; Weight: 145 kg; self-driven; digital display; v.v. password; 8553 Auction-ID: A1-49373-75

Unused in packaging; suitable blade size 350-500mm; 13HP; maximum depth 17cm; Rotation lever for height adjustment; 40L water tank; without saw blade; unused; 6529 Auction-ID: A1-49373-110

disk brush 510mm; squeegee width 850mm; clear water tank 55L; Recovery 60L; work capacity 2000m/h; Voltage 24V; Battery 200Ah212V; Power 1500W; self-driven; battery monitor; light; speed regulator; horn; Charger; manual; 7534 Auction-ID: A1-49373-74

70 liters; 65db ; digital control panel ; 500w ; 4866 Auction-ID: A1-49373-503

disk brush 510mm; squeegee width 850mm; clear water tank 55L; Recovery 60L; work capacity 2000m/h; Voltage 24V; Battery 200Ah212V; Power 1300W; battery monitor; light; speed regulator; horn; Charger; manual; 7535 Auction-ID: A1-49373-206

disk brush 350mm; squeegee width 450mm; clear water tank 20L; Recovery 25L; work capacity 1350m/h; Voltage 24V; Power 900W; brush disk motor 400W; suction motor 500W; battery monitor; Charger; manual; key-card; 7531 Auction-ID: A1-49373-203

disk brush 350mm; squeegee width 450mm; clear water tank 20L; Recovery 25L; work capacity 1350m/h; Voltage 24V; Power 900W; brush disk motor 400W; suction motor 500W; battery monitor; Charger; manual; key-card; 7531 Auction-ID: A1-49373-202

24V/32Ah; clean water tank 10L; dirty water tank 15L; work efficiency 1350m2/hour; unused in transport crate; 6744 Auction-ID: A1-49373-620

disk brush 510mm; squeegee width 850mm; clear water tank 55L; Recovery 60L; work capacity 2000m/h; Voltage 24V; Battery 200Ah212V; Power 1500W; self-driven; battery monitor; light; speed regulator; horn; Charger; manual; 7534 Auction-ID: A1-49373-73

disk brush 400mm; squeegee width 580mm; clear water tank 25L; Recovery 30L; work capacity 1500m/h; Voltage 12V; Battery 40Ah212V; Power 900W; brush disk motor 400W; suction motor 500W; 2000RPM; battery monitor; build-in Charger; manual; 7532 Auction-ID: A1-49373-205

70 liters; 65db ; digital control panel ; 500w ; 4866 Auction-ID: A1-49373-502

24V/32Ah; clean water tank 10L; dirty water tank 15L; work efficiency 1350m2/hour; unused in transport crate; 6744 Auction-ID: A1-49373-621

disk brush 400mm; squeegee width 580mm; clear water tank 25L; Recovery 30L; work capacity 1500m/h; Voltage 12V; Battery 40Ah212V; Power 900W; brush disk motor 400W; suction motor 500W; 2000RPM; battery monitor; build-in Charger; manual; 7532 Auction-ID: A1-49373-204

2 power supplies (backup) 450W Hot Plug Device neutralized, RUN Time tested, data erased and internally cleaned, 2 processors, EP400i Model: TX 2550 M5 Processor/ CPU: 2 x Intel Xeon Silver 4208 2.10GHZ 8 cores per CPU Board: D3386-B1 Core: /Processor: 2 Processors Installed Hard Drive/SSD: (2x) 960 GB SSD RAM: 36 GB DDR4 PSU: 2x Graphics: Matrox G200e Drive: DVD Multidrive Network connection: 4 x RJ-45 i350 Gigabit Interfaces: 3x LAN, 4x USB 3.0 (rear), DVD, VGA Auction-ID: A1-49308-55

Dismantled and palletized structure, ready for loading. Approximate surface area: 35 x 23.50 m, or approximately 822 m² Load capacity: 500 kg/m² Height: 300 cm 30 mm thick wooden floor 2 stairs included White sandwich panels not included The structure has already been dismantled and palletized. Loading the truck is done free of charge for the buyer. Auction-ID: A1-49935-21

Softwood floor planks with a working size of 28×135×2150 mm, suitable for indoor application. The boards are equipped with a GG profile (groove/groove) and are connected to a separate fish mouth, which ensures neat alignment and stable assembly. The beams are pressure impregnated (KDI) and colored brown. Auction-ID: A1-45099-2143

2 power supplies (backup) 450W Hot Plug Device neutralized, RUN Time tested, data erased and internally cleaned, 2 processors, EP400i Model: TX 2550 M5 Processor/ CPU: 2 x Intel Xeon Silver 4208 2.10GHZ 8 cores per CPU Board: D3386-B1 Core: /Processor: 2 Processors Installed Hard Drive/SSD: (2x) 960 GB SSD RAM: 36 GB DDR4 PSU: 2x Graphics: Matrox G200e Drive: DVD Multidrive Network connection: 4 x RJ-45 i350 Gigabit Interfaces: 3x LAN, 4x USB 3.0 (rear), DVD, VGA Auction-ID: A1-49308-56

floor scrubber Brand: Kremer Type: KRM350 Function: Scrubbing and drying in 1 cycle Capacity: 1520m² per hour Brush diameter: 380 mm Holding tank: 35 litre holding tank Clean water tank: 30 liter clean water tank Number of motors: 2 motors Battery: 24 V / 52 Ah battery Including: battery charger available Manual: manual available Condition: Unused in the original packaging Auction-ID: A1-40897-500

Floor fireplace ESTELLE - White| Freestanding Bio-Ethanol Column Fireplace | Steel housing in white; Body: powder-coated steel, burner chamber matt black; Sliding door with viewing window made of safety glass; Burner: Stainless steel; Model 9017-12 , 2-chamber burner with ceramic wadding; Capacity 1.5 ltr.; Infinitely variable consumption 0.5-0.8 litres/hour; Burning time approx. 2-3 hours; 39 x 39 x 151 cm (width x depth x height); Weight: 32.5 kg; for indoor use; 96% denatured for use with bio-ethanol; complies with European DIN standard 4734-1; Heat output 2-3 kW Auction-ID: A1-49989-12

Unused; 300x300mm; Thickness 20mm; tiles are connectable to eachother Auction-ID: A1-49902-71

Each floor equipped with touch control; Equipped with stainless steel height-adjustable bridge insertion function; chamber size approximately 1650x1180x150 mm; overall size of the setup 2150x3200w2500 mm; equipped with extractor hood; Auction-ID: A1-49547-6

464m PVC sill. PVC molding I-X. PVC molding BEECH. PVC molding 03 white/black. PVC molding 04 white/brown. Auction-ID: A7-49492-28

608m Floor PVC mask Floor PVC mask Beech H-100 Smooth. Floor mask 09 White/Syginge H-100. Plum floor mask. Floor mask Cherry. Auction-ID: A7-49492-26

floor scrubber Brand: Kremer Type: KRM30 Function: Scrubbing and drying in 1 cycle Capacity: 1350 m² per hour Brush diameter: 350 mm Holding tank: 15 litre holding tank Clean water tank: 10 liter clean water tank Number of motors: 2 motors Battery: 24 V / 32 Ah battery Including: battery charger available Manual: manual available Condition: Unused in the original packaging Auction-ID: A3-46156-1097

Unused; 300x300mm; Thickness 20mm; tiles are connectable to eachother Auction-ID: A1-49902-72

floor scrubber Brand: Kremer Type: KRM350 Function: Scrubbing and drying in 1 cycle Capacity: 1520m² per hour Brush diameter: 380 mm Holding tank: 35 litre holding tank Clean water tank: 30 liter clean water tank Number of motors: 2 motors Battery: 24 V / 52 Ah battery Including: battery charger available Manual: manual available Condition: Unused in the original packaging Auction-ID: A3-46156-1096

559,8m PVC sill. PVC molding cherry 001. PVC molding walnut. PVC molding triangle. PVC molding 019 - indian marble. PVC molding 07 - red marble. PVC molding 08 - GREEN marble. PVC molding - marble. Auction-ID: A7-49492-27

Equipped with Kennis R11.000 crane 1x extendable up to 11 meters 1x steering axle Auction-ID: A1-47416-76

Equipped with: Steel staircase with grid steps, system profiles perforated, original calculations available, 36 meters of handrail (steel) present, column pressure on concrete floor max 11180 kg! Complete with mounting material! Mezzanine Floor. Suitable for furniture and textile storage. Auction-ID: A1-47360-5

Equipped with 1x lifting axle and 1x steering axle equipped with Hiab 130F2 crane 2x extendable to 6.5 meters max lifting weight 3770 kilos equipped with heavy side beam and stanchion pots Auction-ID: A1-47416-75

Equipped with: Steel staircase with grid steps, system profiles perforated, original calculations available, 36 meters of handrail (steel) present, column pressure on concrete floor max 11180 kg! Complete with mounting material! Mezzanine Floor. Suitable for furniture and textile storage. Auction-ID: A1-47360-3

1X lifting axle 2x steering axle equipped with 2001 Knowledge 16,000 crane 3x extendable up to 7.10 meters max 4500 kilos Auction-ID: A1-47416-78

spindle diameter:130 mm spindle diameter:130 mm x-travel:2190 mm y-travel:1520 mm z-travel:1000 mm w-axis:1075 mm table surface area:2000 x 1800 mm workpiece weight max.:8000 kg spindle turning speed range:4,5 x 900 U/min spindle taper: ISO:50 faceplate turning speed range:4,5 x 180 U/min faceplate diameter:785 mm rapid traverse::5000 mm/min total power requirement:40 kW weight of the machine ca.:35 t dimensions of the machine ca.:5,5 x 6,9 x 5,2 m Machine retrofit and overhould with TNC 360 Heidenhain in 2023 and stepless spindle speeds - table indexing 4 x 90° - facing head 785 mm - exhauster - various arbors and tooling

bore capacity in steel (diameter):- mm throat:- mm bore stroke:- mm x-axis:1.800 mm y-axis:1.600 mm z-axis:1.250 mm w-axis:630 mm max. table load:5.000 kg table length:1.400 mm table width:1.600 mm spindle diameter:105 mm spindle turning speed range:3.300 U/min numbers of positions in the tool changer:40 internal coolant system feed:40 bar Splash guard around rotary table Chip Conveyor Oil cooling unit (chiller) Touch probe Renishaw RMP60 Upgrades in 2024 and 2025 Retrofit of X and Z axis ball screws at producer ? KSK Kurim CZ New linear scales Heidenhain in X and Z axis including cabling retrofit of Z axis - new Biplast V lining on guideways, hand scraped Biplast lining on Z axis new TOS Varnsdorf parts for tool clamping and automatic tool changer arm Overhaul of X, Z and Y axis feed motors at authorized Siemens service (new bearings and sensor) New Siemens hand wheel

spindle diameter:100 mm x-travel:1250 mm y-travel:1100 mm z-travel:950 mm spindle turning speed range:2500 U/min Rotary-table:1100 x 1000 mm table surface area:1000 x 1100 mm tool clamping:69871 DIN spindle stroke:630 mm spindle taper:SK50 total power requirement:22/34 kW max. workpiece weight:3000 kg weight of the machine ca.:13000 kg

x-travel:3500 mm y-travel:2500 mm z-travel:1250 mm w-axis:800 mm bore spindle speeds:2500 U/min table load:12 t dia. of rotary table:1800 x 2200 mm numbers of positions in the tool changer:60 ? Overhauled in 2025 and 2026 ? The spindle was relubricated and new spindle bearings fitted in 2025 by technicians from TOS Varnsdorf ? 12-month warranty and guarantee on geometric accuracy Scope of repairs to the X, Z and B axes 1. Complete dismantling and cleaning of the machine bed for the X and Z axes as well as the B axis 2. Regrinding of X and Z axis guide ways at Czech manufacturer of CNC horizontal boring machines 3. Removal of the old lining from the X- and Z-axis slides and the B-axis 4. Anchoring of re-grinded X and Z axis machine bed 5. New, hand-scraped lining made from Biplast-V on the X- and Z-axis slides, and from new Biplast-V on the B-axis 6. Installation of ball screws, lin ...

spindle diameter:150 mm x-travel:3.000 mm y-travel:2.000 mm spindle stroke:700 mm dimension of the ram:340 x 340 mm ram stroke:700 mm column travel:1.500 mm high speed spindle taper ISO:50 bore spindle turning speed range:3,2 - 1.600 U/min table surface area:2.000 x 2.500 mm max. table load:25.000 kg rapid traverse speed:5/10 m/min feed speeds:1 - 1.500 mm/min faceplate speeds from - to:3,2 - 140 U/min dimensions of the machine ca.:8,4 x 6,8 x 5,9 m weight of the machine ca.:57 t total power requirement:100 kW Full B-axis Aerostatic guides Coolant system with IKZ

spindle diameter:130 mm x-travel:5000 mm y-travel:3000 mm z-travel:2000 mm The TOS Varnsdorf WHQ 13 CNC is a high-performance CNC-controlled horizontal table drill press fitted with a Siemens Sinumerik 840D CNC control system, designed for the precise machining of large and heavy workpieces. The machine is suitable for drilling, boring and milling complex components and is typically used in heavy machinery manufacturing, plant engineering, toolmaking, and in the energy and heavy industries. With generous travel ranges of 5,000 mm on the X-axis, 3,000 mm on the Y-axis and 2,000 mm on the Z-axis, the machine offers an extensive working area. The worktable, measuring 2,500 × 1,800 mm, can accommodate workpieces weighing up to 20 tonnes. The horizontal spindle achieves a speed of up to 3,000 rpm. In combination with the supplied milling head, even demanding milling operations and various ma ...

spindle diameter:150 mm x-travel:3000 mm y-travel:2000 mm spindle stroke:700 mm dimension of the ram:340 x 340 mm ram stroke:700 column travel:1500 mm spindle taper ISO:50 bore spindle turning speed range:3,2 - 1600 U/min table surface area:2000 x 2500 mm max. table load:25000 kg rapid speed:5 / 10 m/min feed speeds:1 - 5000 mm/min total power requirement:100 kW weight of the machine ca.:57 t dimensions of the machine ca.:8,4 x 6,8 x 5,9 m with CNC SIEMENS 840 D full B-axis aerostatic guideways facing head ( 3,2 - 140 rpm ) angular milling head 1000 Nm coolant attahcmnet with internal cooling supply

spindle diameter:130 mm x-travel:2190 mm y-travel:1520 mm z-axis:1520 mm w-axis:1000 mm table surface area:2000 x 1800 mm workpiece weight:8 t spindle motor:18 kW spindle taper ISO:50 spindle turning speed range:4,5 - 900 U/min faceplate diameter:785 mm rapid traverse:5 m/min total power requirement:40 kW dimensions of the machine ca.:5,5 x 6,9 x 5,2 m weight of the machine ca.:35 t Machine was retrofitted in 2023 with HEIDENHAIN TNC 360 CNC control - inf. variable spindle spped - 4 x 90° table positioning - diverse toolholders - dDust exhauster

spindle diameter:120 mm x-travel:1250 mm y-travel:1250 mm z-travel:800 mm W-axis (spindle longitudinal):600 mm Speed of boring spindles:1- 2000 U/min. spindle taper ISO:50 table surface area:1000 x 1000 mm total power requirement:55 kW weight of the machine ca.:18 t with CNC HEIDENHAIN TNC 426 autom. toolchnager 40-pockets coolant attachment

Aufspannflaeche 3,000 x 2,000 mms table height 1,150 mms

automatic CUTTING BORING and MOULDING machine BACCI TTF1 2TM . second hand machine working conditions : Excellent hydraulic drive of all the movements volt. 380/50 CE mark : YES Machine suitable for assembling part of chairs, tables, frames, furniture, wheelchair frames, etc. The BACCI TTF1 2TM performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined . the milling unit is composed of n.02 spindle moulders ( anti-splinter system ) machine composed by 3 working units : 1- Cutting unit : circular saw max.diam. mm.400 motor power Hp 3 2- Boring unit : boring head with 5 mandrins motor power Hp 3 3- Moulding unit . with automatic movement of the carriage on recirculating ball bearings n.02 spindle moulders (anti-splinter) motor power Hp 7,5 spindle diam. mm.35 hydraulic unit motor power Hp 2

conventional ´ traditional Tischbohrwerk, work spindle diameter 85 mm Traverse paths x 1000 mm, y 1000 mm, z 900 mm, ISO 40,. Clamping area table 1000 x 1120 mm with position indicator

AUTOMATIC BORING machine 35 spindles SCM TOP 35 second hand machine electric movement of boring head 0° / 90° technical details : n. 35 spindles center distance between spindles mm 32 center distance between first and last spindle of the drill head mm.1088 max. stroke of boring unit mm. 140 n.02 motors Hp 3 each one operating pressure atm 6-8 weight kg.800 volt. 380/50

Spindle speed continuously variable electronically 40-4000 RPM Thread cutting capacity max M8 Thread-cutting depth digital depth display digital speed display digital drill depth indicator Drilling depth stop on stop ring Feed / hand Table height with rack and pinion Duration / standard ALB ear performance steel Ã? 13 mm / 15 mm Depth 60 mm Projection 225 mm Column diameter 60 mm Usable table area (B x L) 330 x 250 mm Machine dimensions (W x D x H) 420 x 450 x 860 mm Engine dimensions (with VP) (W x D x H) 452 x 700 x 1130 mm Weight 62 kg max distance spindle/table/stand 300/ 360 mm Motor alternating current with frequency inverter 230 V, 0,54 kW Warranty: 3 years Free House including packaging (Germany only)

Standard equipment Robust, high-quality and inclined rotation hood for easy reading of the speed LED lighting Easily adjustable and ergonomic drill depth stop Infinitely variable speed control Connection cable with plug (1,2 m) Undervoltage release Drill protection with Electr. Hedging Thermal overload protection Emergency off pushbutton Weight in kg: 30 Engine kW: 0.45 Rotary / alternating current: alternating current in V: 230V Speed 1/min: 250-3000 Drill capacity mm: 10/12 Thread cutting capacity: Max M6 -Steel Ã? 12 mm -Aluminum Ã? 20 mm -Softwood Ã? 40 mm -Drilling depth 50 mm -Throat depth 180 mm -Column diameter 50 mm -Usable table area (B x L) 180 x 260 mm -T - slot size number 2, distance 100 mm Dimensions width 12/20 mm Spindle B-16 Digital speed display Drilling depth indicator scale Drilling depth stop adjustable stop ring fast Feed by hand Steel &At ...

Control: Heidenhain TNC 360 (1992) Table size: 1000 x 1000 mm Table size with front extension: 1345 x 1000 mm Table load max.: 2000 kg Distance spindle centre to column min/max.: 270 ~ 1270 mm Distance spindle nose to table min/max.: 0 - 1100 mm Distance between the upright columns: 1855 mm Table longitudinal travel : 1400 mm Boring ram carriage cross travel: 900 mm Crossrail vertical travel: 850 mm Boring spindle travel: 370 mm Spindle motor rating: 6 KW Spindle speed range: 30 - 1500 rpm Boring spindle diameter: 82 mm Spindle taper: MK 5 Borer diameter: 2 - 70 mm Boring tool diameter: 17 - 450 mm Boring diameter in solid ST 60: 45 mm Boring diameter in solid Cast iron: 70 mm Equipped with: Tooling; Accessories Machine overhauled and retrofitted in 1992 !; Very good