floor type boring used for sale

General SKU366W1572 LocationBarneveld MakeKrahnen TypeAirflex 30 type 4 No.3405030 Year of construction2009 Main Features MaterialStainless steel Specified Features - Miscellaneous MaterialStainless steel Capacity470 mm MotorAir Information Total height1,12 m Weight69 kg CEcheck Floor space0,60x1,50 m ATEX compatiblecheck Extra SpecificationsSuction width 650 mm, brush width 470 mm, tank volume 21 l., dirty tank volume 25 l., air cap. 61-90 m3/h, suction cap. 148 m3/hMiscellaneousKrahnenMiscellaneous > MiscellaneousBrand > Krahnen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

530 m² mezzanine floor 1-storey Stow Used goods, good condition, see pictures Length approx. 24m Width approx. 22m Height 1 level upper edge approx. 4.3m Height lower edge approx. 3.88m Load per m² 500 kg Stud type: Shaped tube profile 120/120 incl. 2 stairs incl. 4 transfer stations incl. 2 side railings Negotiation price: € 39,000,-- net from stock Partial sale and CAD planning possible. All plans and statics available. Mezzanine floor already dismantled, loaded by seller. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices ...

This mixer is used but has been cleaned and tested This HL662-1STD is ideal for commercial kitchens thanks to its 60 qt. bowl, stainless steel bowl guard, and dough hook. With an ergonomic design and superior functionality, you can make repeat recipes consistently and create new ones with ease and efficiency. This unit requires a 200/240V electrical connection for operation. Ergonomic Swing-Out Bowl Featuring an ergonomic swing-out bowl, this mixer makes it easy to load and unload ingredients. With a single point bowl installation, you can easy mount or remove the bowl as needed. Plus, the bowl interlock ensures that the mixer bowl is properly in place before the mixer will operate for added safety. Dough Hook This mixer comes with a (1) "ED" dough hook so you can mix up to 90 lb. of dough at once. The 2.7hp motor, gear transmission, and safety mechanism system provide plenty  ...

Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, sorting belt, sorting conveyor belt, readout conveyor belt -Side walls made of: stainless steel -Speed: 118 m/min -Drive: 0.75 kW -Belt width: 590 mm -Length: 2000 mm -Transport dimensions: 4360/1170/H1170 mm -Weight: 684 kg

Antistatic industrial flooring, grey mottled used, good condition Click plates Thickness: approx. 10.4 mm Different sizes available: ca. 410 pcs. Abm. approx. 600 x 600 mm approx. 129 pcs. Abm. approx. 600 x 300 mm ca. 90 pcs. Abm. approx. 1,000 x 600 mm ca. 40 pcs. Abm. approx. 1,200 x 600 mm ca. 3 pcs. Abm. approx. 600 x 530 mm Price: on request Location: Bochum Intermediate trade reserved

Baking oven with 4 floors, hood and stand Dimensions: 165x155x215cm Electric power: 10.5kW

Bakery Oven with 4 floors and a fermentation chamber Dimensions: 115x120x200cm Electric power: 42kW Capacity: 2 trays x 60x80cm

- 2 units availebel matching cast irion floorplates bedplates - Integrated levelling chambers - Can be used in combi with PAMA SPEEDRAM 1000 Machid 8643 - Testing area - Mounting area - Measuring area - Calibration area

General SKU382X960 LocationBarneveld MakeSartorius Intec TypeIFS4-300II-L Main Features MaterialStainless steel Specified Features - Miscellaneous MaterialStainless steel 1.4301 (304) Capacity200 kg Motor100-240 volt Capacityd=0,01 Information Mach.No.346 383 40 Floor space1,0x0,8 m CEcheck Total height1,0 m Weight60 kg Extra SpecificationsThis floor scale was installed in its original configuration with multiple accessories. - Pharmatech flexisieve 350 0.1m², SKU 382X961 (SOLD) - Pharmatech 2000 ltr double cone blender SKU 382X962 - Pharmatech Hoist, SKU 382X963 MiscellaneousPharmatechMiscellaneous > MiscellaneousBrand > Pharmatech What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please vis ...

Floor Slabs (Filigree) Carousel VOLLERT, Control: PTA-WIGGERT Capacity approx. 800m2/ day Steel pallets 2,4 x 13,5 m, 43 pieces Manufacturer Nuspl and Schwinghammer Year of construction 1994 Complete steel processing (FILZMOSER) Including longitudinal wire straightening machine with 6 wires and hyperbolic rotor, diameter 6-14 mm Cross wire roller straightener diameter 8 mm Producing of spacers on cross wires Lattice girder processing, measuring and cutting equipment Steel robot for laying bars and lattice girders Cleaning and plotter, Weckenmann Concrete spreader, Weckenmann Vibration station SKAKO Curing chamber with fully automatic restacking crane VOLLERT Control system completely renewed in 2014 by PTA Wiggert Master computer is integrated

Double Shield Tunnel Boring Machine for hard rock Typ of TBM Hardrock Double Shield TBM Manufacturer Robbins / Herrenknecht Year of manufacture 2015, 2020 Boring diameter DME = 7.100 m Length 14 m Main drive power 7 x 330 kW = 2.310 kW Main trust force 33.780 kN @ 350 bar Stroke length 1.760 mm Installed power 4.800 kVA Weight ca. 770 t Find more here - /

CATALOG NUMBER M0252 PRODUCT FEATURES The main features of the machine: - Single-head drilling machine for drilling in the range of 0 - 90 ° - Pivoting angle of the head adjusted pneumatically - Possibility to set lateral supports with an accuracy of 0.1 mm - Safety holders allow quick adjustment of panels without adjustment - Spindles adapted for quick couplers - Patented pneumatic clamps of the material - MDF work table - Quick and accurate adjustment - Precise drilling - Italian production Standard equipment of the machine: - 2 aluminum rulers with a length of 1.5 m (right and left) with four stopwatches - 5 quick connectors - Wooden box securing the machine in transport. ADVANTAGES - vertical / horizontal / angled drilling - multi-spindle - new machine - CE certificate - solid - professional TECHNICAL DATA - number of spindles 23 - dista ...

Specifications: Uniform spindle spacing: 32 mm Number of spindles: 23 Distance between the first and last spindle on the drill head: 672 mm drilling depth: 80 mm Table size: approx. 900 x 545 mm size of the workpiece: 800 x 2500 x 100 Working pressure: 0.6 MPa Air consumption: 10 NL/cycle Voltage, frequency: 400 V/50 Hz Spindle speed / min.l: 2800 rpm. Motor power: 1.5 kW Weight ca: 400 kg Dimensions: 1220 x 1065 x 1400 mm Patented spiral system Programming and adjustment devices of horizontal and vertical Drilling depth. Pneumatic drill head shears Drill head frame of 0-90 degrees with blocking in any position and reference switching angle with each angle Head with quick-connect spindles (the quick-release buckets are a Zubehoer). 5 quick-release buckets are standard. 2 patented pneumatic pressure devices accident-protected. 2 side connectors on the table ...

Duebel hole drilling machine BORING SYSTEM 21 PRESTIGE QUICK CONNECTIONS 21 DRILLING SPINDLES AXLE DISTANCE 32 MM CENTER DISTANCE FROM THE FIRST TO THE LAST DRILL CHUCK 640 mm DRILLING DEPTH 65 mm Engine power 2 hp Aluminium stop with 2 folding straps equipped with 1 left stop 1500 mm and 1 right stop 1500 mm 5 drilling spindle droplets 2 Pneumatic hold-downs in a safe and secure manner incl. packaging Quick Connection Drilling Spindles Drill head in cast iron Cast iron work table Drilling depth adjustment via patented spiral system Pneumatic scraping of the drilling group from 00 to 90 ° adjustable in any position. Stop infinitely adjustable via millimeter scale with magnifying glass High drills over num. digital display adjustable Back-side stop max. travel 300 mm Fixed stop on 37 mm for doorband Machine built according to Ce standards

We have for sale milling and borig heads for Skoda HBM IV25, IR100, IFW1, IFW2, IFW3, IFH, IOT steady rest for W200 price from 1000-5000eur

10 meter deep hole boring machine Kramatorsk KJ1910 10-meter boring depth - Heavy duty: 25-ton workpiece foratrice per fori profondi Heavy duty: Max. work-piece weight 25 tons Spindle motor kW 85 Counter rotation motor 90kW Spindle hole diameter mm 700 Max. boring diameter, mm 600 Center height over the bed, mm 670 Max. work piece external diameter, mm 1300 Work piece length range on one-sided machining, mm 1000...10000 Work piece diameter range, mm: Machine overall dimensions, approx mtrs 31 x 3 x 2,3 Machine weight, kg 90000 (approx) Machine in our wahouse (I-25064 Gussago - BS - Italy), Counter rotation: Yes, Drlling depth: 10000 mm, Max workpice weight: 25 ton, Spindle motor: 90 kW, Counter rotation motor: 92kW

Dimensions (L/W/H): 2700x2500x1760 mm Weight: 1500 kg Total power requirement: 4,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3900x2500x1760 mm Weight: 2000 kg Total power requirement: 6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 5000x2250x1650 mm Weight: 2600 kg Total power requirement: 11,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3900x2500x1760 mm Weight: 1800 kg Total power requirement: 5,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3900x2500x1760 mm Weight: 2000 kg Total power requirement: 9 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3900x2500x1760 mm Weight: 1800 kg Total power requirement: 6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2700x2500x1760 mm Weight: 1500 kg Total power requirement: 5,9 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3900x2500x1760 mm Weight: 2000 kg Total power requirement: 11,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3900x2500x1760 mm Weight: 1800 kg Total power requirement: 6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 0 mm x-travel: 700 mm y-travel: 600 mm table length: 800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Double Column Design Jig Borer Tablesize: 800 x 600mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cantilever racks SPECIFICATIONS Mast height: 4000 mm (blue) Truss length: 1200 mm or 1200+1200 mm (orange) Item 1 05 Supports 10 trusses Grid/round POSTS 2 07 Supports 14 trusses Grid/round Item 3 11 Double-sided supports (re-li) 44 trusses Grid/round Base 2600 x 30 x 30 mm Item 4 17 double-sided supports (re-li) 68 trusses Crossbars Base 2600 x 30 x 30 mm

This 7-axis Star SR-20J type C Swiss Type Turning was manufactured in 2015. It features a maximum machining diameter of 32mm, headstock stroke of 310mm, and spindle speeds up to 7,000rpm. Equipped with a Hydrajet BF20-2000 high-pressure coolant system and an Absolent A.Mist 10S mist extraction unit, the Star SR-20J type C represents a robust addition to any machining setup. Contact us for further details regarding this Swiss Type Turning.

This Star SR 20 J Type C was manufactured in 2011. It features a max turning diameter of 20 mm, spindle speeds up to 8,000 rpm, and a spindle power of 2.2 kW. The machine includes six fixed turning tool positions and five radial motorized tools. Ideal for precision Swiss-type turning, it has a compact footprint of 2.20 × 1.20 m. Contact us for more information about this machine.

This 5-axis Star SB-20R type N was manufactured in 2014, featuring a CNC Fanuc 0i-TD, C-axis on both main and sub-spindles, and a 6-position tool holder. It includes a 5-spindle unit for cross drilling, a sub-spindle with a 20mm part picking capacity, and a standalone coolant tank. Ideal for precision small parts production. If you are looking to get high-quality turning capabilities, consider the Star SB-20R type N machine we have for sale. Contact us for more information.

Cat.-Nr. 09-2900-2 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Cat.-Nr. 09-2900-1 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Saw blade width: max. 110 mm Roll diameter: 1100 mm passage height 600 mm Opening width: 200 mm Number of feed rollers: 4 roll Adjustment: pneumatic Main engine: 22 kW Infeeding seed: max. 40 m / min,

We produce stone forecastle records (cooker-flat) Bakeplates for everything type from ovens: -MIWE -WP merchant quail -Debag -Sveba Dahlen -Daub -Heuft and other proficient ones. also stoves for pizza and fur ordered in another dimension (length, width, thickness) ... our panels a perfectly smooth surface are marked, are resistant to mechanical pushes, do not carry during the use, a very long life span. users praise good baking quality.

1. 1971, BELL TYPE, TEMP.: 500 °C, COIL DIM.: OD 1400 MM x 1600 MM 2. VEB, 1971, INNER CHAMBER DIM.: 2.5 x 1.3 x 1.5 M, TEMP.: 500 °C

Dosing station for lye Stabicip 0 X 1 380 V, 50 Hz; 6 bar

For Amos press 1600 3 Steück new mesh belts type 5060 22600 Mm Width 1600 mm Chain and closure polyester unit price 2250,-

HIGH PRODUCTION BABCOCK ROLLERS DRYER

+ G weather mixing angle Wolf G 160 mm type 449 with loading, mixing unit with mixing screw and paddle mixing shaft, hopper capacity (the Ausf. Funnel attachment) 245 litres. Gladly we invite you, to visit the machine with us in 56070 Koblenz.

GEA-CFS” fryer Type BRN 3000/500 all stainless steel electrically heated 84 kW frying length 3.000 mm belt width 500 mm mechanical lid oil level control teflon-infeed extra infeed conveyor 5 mm extra outfeed conveyor 5 mm oil circulation pump filter sediment removal system electrical hoists fire protection total length ± 6.650 mm total width ± 1.500 mm total height ± 3.200 mm

Barsso” vacuum tumbler Type 5 Bartumb NEW ! all stainless steel PLC control with 50 programs max. load : ± 500 kg adjustable speed from 0 up to 9 rpm with vacuum pump Büsch with water filter dimensions (l x w x h) : 2.550 x 1.300 x 1.650 mm

Wolfking” mixer-grinder Type TSMIG 1250/200 twin shaft paddle mixer mixer capacity 1.250 L. 200 mm – head with tool trolley all stainless steel dimensions mixer (l x w x h) : ± 2.350 x 2.000 x 2.600 mm loading height : 2.200mm pneumatic lid suitable for cooling with N2 or Co2

Koppens” contact cooker Type BG 6000/600 continuous teflon belt grill all stainless steel electrically heated 20 x 15 kw = 300 kW Heating elements Complete new control box (with 20 new heating elements) with lower and upper belt - bottom and top grilling temperature of the belts is separately adjustable nett length 4.800 mm belt width 600 mm adjustable speed product height electrically adjustable total length 8.500 mm total width 1.450 mm total height 2.250 mm (closed) 2 new belts Belt wash system

Koppens” contact cooker Type BG 6000/400 continuous teflon belt grill all stainless steel suitable for thermo oil heated with lower and upper belt - bottom and top grilling temperature of the belts is separately adjustable nett length 6000 mm belt width 400 mm adjustable speed product height electrically adjustable total length 8.500 mm total width 1.450 mm total height 2.250 mm (closed)

Berief” drum blancher Type Jumbo KODUKO 16/500 continuous blanching / pasteurizing / cooking vessel or cooling plant shaftless spiral : perforated drum with welded screw (helix configuration) by which the products are gently transported through the water complete insulated closed system : energy saving by the insulation of the entire machine and the indirect steam heating nett length ± 11 m all stainless steel adjustable speed variable dwell adjustment steam heated • connection 400 kg / h (5 bar) heat exchanger circulation pump with conveyor belt with elevating spiral screw for loading

Depositor "Tromp" Type : 180.02.076 all stainless steel for liquid and semi-liquid products with hopper with servo-engins 2-head-outfeed programmable EN - DE – NL passage Max. 15 mm cylinder max. 500 cc digital - touchscreen mobile dimensions (l x w x h) : 1.400 x 800 x 1.500 mm y.o.c. 2000

Sell granulator for plastic strands of extrusion. 7,5 kW power. Sale, clearance there. If it works, I don't know, therefore the reasonable sale price.

all stainless steel belt width 900 mm mobile mesh width 5 mm adjustable speed with batter pump (2 pieces) outfeed belt outside dimensions (l x w x h) : ± 2.600 x 1.300 x 1.700 mm

Type: Treif Divider Type 2550 Slices are precisely stacked on top of each other even when the stacks are 100mm high The slicer can also be equipped with the automatic shaving function upon request The machine can also accommodate the off-set delivery of products such as cheese Compact and space-saving design ensures optimum utilization of space-saving High degree of flexibility: Product can be changed without mechanically changing the system Special solution: expanded chamber up to 220 mm to accommodate Italian Mortadella for example Dimension of the machine Length: 210 cm Width: 80 cm Height: 210 cm Electrical power: 4.8kW Delivery time: 30 working days after payment