floor type boring used for sale

continuous grilling line completely stainless steel adjustable product height Useful length 1,800 mm Track width 600 mm with bottom and top band: bottom and top contact frying independent temperature control at the top and bottom electrically heated ± 90 kW with belt washing system at the top and bottom Adjustable temperature range per heating plate (6 pieces) Capacity up to 250 kg / hour depending on the product infinitely variable speed Dimensions (L x W x H): ± 3,000 x 1,650 x 2,400 mm

Punching tools for window construction -various types: AM 06 93 -993333/993352-1/993335/993334/94-234907 -Sale: only complete set -Total weight: 50 kg

GEA type 200023512 Intercooler Ladeluftkühler MTU Einwandfreier Zustand perfect condition from an MTU4000 engine that has been running for 25,000 hours von einem MTU4000-Motor, der seit 25000h in Betrieb ist

Ref.nr: 00911 Name of the system Vertical Inside Broaching Machine The electromechanically driven broaching machine is suitable for the precise and economical production of internal profiles, keyways and gears. Thanks to their robust construction, very smooth running and automated process sequences, it is ideally suited for use in series production. Manufacturer: Frömag Model Type FSR 6-800 MZB-PPC Year of construction 2008 Holder for three broaching needles Hub 800 mm aVersion: Vertical internal broaching machine Pulling force: 60 kN Connected load: 15 kW Control: FRÖMAG Commander PP-10 Broaching tools: 3 pieces Machine Dimensions (L x W x H): approx. 1,050 x 900 x 3,800 mm Condition Fully functional, currently dismantled, but if necessary this can also be demonstrated with the agreement of the seller Submission date Immediately

used non-ferrous separator Manufacturer: WAGNER Type: 0428-25/60 Machine No.: 214401 Year of construction: 1994 specifications: Conveying width: approx. 600 mm Throughput: 40-65 m³/h Belt speed: 0.12 m/sec to 1.3 m/sec Weight: approx. 1,200 kg Protection class: IP 54 (control device) Motor rotor drive: 3.7/4.7 kW Motor belt drive: 0.75 kW

Didar Part Number 260057620 Original Part Number 362161 – 472046 In-Pipe Water Pressure 4 – 7 bar Out of Pipe Air Pressure 2 – 6 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 230 °C Amount of Water in the Pipe 58 Lt. Amount of Air Outside the Pipe 120 Lt.

Kuper Veneer Zigzag Veneer Composition Machine, Type FW/ 1200-E Year of manufacture 1995 S/N 3508 3179 Special features of the KUPER FW 1200 E: high feed speed of 60 m/min. electronically infinitely adjustable zigzag width of the glue thread cutting device veneer thickness : 3.0 mm min. veneer thickness : 0.3 mm Glued thread with hot air heating Compressed air generation Discus for transporting the veneer over the veneer table Control via foot pedal Feed Speed: 35-60m/min Voltage: 400 V, 50 Hz Total power 1.35 kW Working height 915mm Bzunfcilke Weight approx. : 440 kg Dimensions : 2,12m x 0,73m x 1,55m

all stainless steel hopper capacity 270L die width 400 mm usable die surface 370 x 130 mm maximum volume per stroke ± 1,47 kg maximum 50 strokes / minute total power 8 kW air consumption ± 300 L / min. mobile with mould trolley variable speed 3x400v 50hz with bridge breaker dimensions (l x w x h) : ± 3.140 x 1.900 x 2.570 mm weight 1200 kg PLC control

See Data Sheet

spindle diameter: 0 mm x-travel: 700 mm y-travel: 600 mm table length: 800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Double Column Design Jig Borer Tablesize: 800 x 600mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: mm spindle passage: 23 mm turning length: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

High pressure air compressor Belliss and Morcom High pressure air compressor Belliss and Morcom type: VH9H3N serial no. R188660 year of manufacturing: 2005 maximum working pressure: 40bar capacity: 580 m³ / h incl. pressure tank incl. cooling system / chiller

CHECKWEIGHING MACHINE

Foil wrapping machine with shrinking tunnel manufacturer: Gramegna type: Champion year of manufacturing: 2000 capacity: up to 7.000 bph for wrapping PET bottles into foil and shrinking afterwards

1 used pallet rack; Make: SSi-Schäfer Type: PR600 Year of construction: 2001 Longitudinal truss shelf field load: 8,400 kg lower clear compartment height: 2,093 mm -40 pieces of stand frame frame height: approx. 11,500 mm Frame depth: 800 mm; Profile: P95, galvanized -298 traverses; Traverse length: 4,000 mm INP profile steel beam: 100 x 50 mm; material colour: blue -60 pieces of trusses; Traverse length: 2,700 mm; INP profile steel beam: 100 x 50 mm; Material color: blue -2 pieces of pallets with depth bars; for shelf depth 800 mm;material colour: blue; -10 pieces of steel beams; Length: approx. 4,030 mm U-profile: 100 x 50 mm, material colour: blue -50 pieces of steel beams; Length: approx. 2,780 mm; U-profile: 100 x 50 mm;Material colour: blue Construction can be individually designed. The dismantled system is in our warehouse in Eitorf Transport and assembly ca ...

Available in stock 1 x Used Boll & Kirch Duplex Filter and 1 x Used Boll & Kirch Lub. Oil Automatic Filter. The equipment was used in a HFO power plant. The equipment is used but is in good working conditions. Max all working pressure: 10 bar Max all working temperature: 80ºC

loading : 75 to 80 % double jacket suitable for cooling or heating up to 75°C with mixing arm all stainless steel tiltable drum outside dimensions (l x w x h) : ± 2.400 x 1.100 x 2.000 mm 3kW PLC control yoc 2017

2 knife speeds 2 mixing speeds 2 separate bowl speeds emptier With loader Auto command 3000 K yoc 2017 only 1.603 running hours 125 kW total connected power

Balance range: 1500 g Temperature range: 5° - 40° C Mains connection: 220 V, 50 Hz

Balance range: 1500 g Temperature range: 5° - 40° C Mains connection: 220 V, 50 Hz

Hydraulic press brake Make: Steiner Type: 25/40c Weight: approx. 26 tons. Year of Make: 1984 Technical data: -Compressive force: 2600 KN = 260 tons. -Edge length: 4050 mm -Stand passage: 3050 mm -Table width: 300 mm -Table height: 850 mm -Projection: 300 mm with controlled rear stop with wiring diagram – hydraulics with wiring diagram – electrics Die length: 4050 mm Bending bar: 4050 mm in different lengths Stroke: 240 mm -Drive power: 22 kW -Hydraulic cylinder: Ø 240 mm Press brake is not used much, but is fully functional and in operation -optically good condition- -technich good condition- Hydraulic press brake with CNC control -Make: Cybelec - Type: PC-80/800 -was installed in 2005 -Control is fully functional and in operation no guarantee, no return, no warranty Machine is still in commercial use and can be view ...

Labeler prepared for 3x adhesive labels with hot melt (front/back/safety tab). The labeller was overhauled in 2021 by the manufacturer Gernep, including new electrics according to CE standard. The labeller is equipped for the glass type DTO80. The labeller was in operation for about 200 hours after the overhaul.

Voltage: 3-phase 380V, is in very good condition, ready for operation, the puller roller has been replaced, with various accessories, an on-site inspection is possible.

Z-kneader, Year of construction 1970, engines, bearings, gears, gearbox, electrics, overhauled around year 2022. Machine is immediately available and ready for use. Z-Kneader has an electric tilting device.

Capping heads Zalkin different closure sizes

Extraction Dedusting Nedermann Type 663 with 2 extraction arms Very good condition, straight from production!

Standard Equipment's Chrome Coated Cylinder Boiled Steel Body Pressure indicator Pressure Adjustment User guide 2 Years Warranty CE

belt width 400 mm all stainless steel adjustable speed with lower and upper belt adjustable upper belt with outfeed belt mobile dimensions (l x w x h) : ± 2.200 x 800 x 1.200 mm

Plastic compactor Main drive 132 kW Complete system with recutting mill, fine material separation and recirculation, electrical control

" SPECIAL PRICE DUE TO BUSINESS CLOSURE" 200 mm K+G WETTER Mixer Grinder Type: MAW U200 Model: 431 Type designation 431 Year of Make: 1998 2 speeds Nominal power meat auger drive 21/35 kW Nominal power feeder drive and mixing shaft drive 4.7/5.9 kW Standard operating voltage (special voltages available on request) 400 V / 50 Hz Nominal power 41 kW Rated current 85 A Fuse 100 A gL Cutting Set Unger U 200 Perforated disc diameter 200 mm Processing capacity 184 kg/min (11 t/h) Hopper capacity 530 l Mixing capacity 350 kg Weight 2280 kg Ejector for auger and cutting set hydraulic Support device of the pre-cutter Mixed Time Selection incl. mast load for 200 litre cutter wagon – manufacturer Kittner – year of construction: 2017 completely overhauled Shipping time: immediately

Ref. 443 Light table Mega steel Type 399-3 Fabr. - Order No.: 93-674 Year of construction 1993 Table size: 70 x 100 cm Table top diagonally adjustable Height infinitely adjustable motorized from 85 to 115 cm Light source: 2 fluorescent tubes

VACUUM MASSAGER LUTETIA TYPE 1, WITH BUSCH PUMP TYPE:100-136 Technical description: Drum diameter: Ø1000 mm Capacity: 500 liter Vacuum: 2 mbar Busch pump type: 100- 136 (Serial number:176722) Pump dimensions: 700 x 400 x 450 mm Machine dimensions: 2400 x 1300 x 1800 mm

Press Schüco Model 290124 Type 2 Specifications: •pneumatic • Operating pressure max. (bar): 8 • Weight max. (kg): 80 • Enclosed tool: included (see photos)

LUTETIA VACUUM TUMBLER, TYPE: 4 Technical description: SERIAL NUMBER: 16004 Power supply: 400 V, 60 Hz CAPACITY: 1800 liter, WEIGHT: 1400 kg, WITH LUTETIA STEAM GENERATOR: type: 24 kW, serial number: 12773, year of construction: 2014, capacity: 23 liter, DIMENSIONS: 3800 mm x 2000 mm x 2050 mm. (Including Busch vacuum pump on mobile s/s frame, dimensions: 830 mm x 510 mm x 640 mm)

Automatic hardness testing device with 4 heads Micro IRHD IRHD Type L IRHD Type N IRHD Type H The device needs gibitre software installed on the computer to work. The device consists of a stand and 4 heads

Hobart FTN Belt Transport Dishwasher For sale is a professional, modular HOBART belt transport dishwasher from the proven FTN series. It was specially developed for commercial kitchens, hospitals and canteens to clean immense quantities of dishes, trays and cutlery quickly and resource-efficiently. The plant was professionally dismantled for dismantling and transport. Since the nameplate was lost in the course of use, the model was identified as the Hobart FTN series based on the components, dimensions and controls. It is an extremely robust, purist model, which is operated directly decentrally via the push buttons on the tunnel hoods (no vulnerable central display). Zone division (from left to right): 1. Infeed zone with drive shaft for the finger strap and manual start/stop operation 2. Pre-wash zone for rough cleaning 3. Main washing zone for intensive hot cl ...

Doppstadt DW 3060K Biopower Type F - Year of construction 11/2017 - Hours 4839 - Engine MTU 490 hp - AD BLUE - Track chassis - Weight 30,000 kg -Remote control - Humidification system - Tail conveyor 7m - Overbelt magnet Machine is overhauled and immediately available

Doppstadt DW 3060 Biopower Type F - Built in 2017 - Hours 6118 - Engine MTU 490 hp - AD BLUE - Weight 25,000 kg - 42 teeth -Remote control - Humidification system - Rear conveyor 5.5m - Overbelt magnet Machine is overhauled and immediately available