floor type boring used for sale

Loading size 1200x800 mm, max. load capacity 1000 kg, permissible total weight tugger train 4000 kg, max. speed 6 km/h, 4 steered castors, 2 rigid castors Auction-ID: A1-51646-20

Loading size 1200x800 mm, max. load capacity 1000 kg, permissible total weight tugger train 4000 kg, max. speed 6 km/h, 4 steered castors, 2 rigid castors Auction-ID: A1-51646-19

floor scrubber Brand: Kremer Type: KRM30 Function: Scrubbing and drying in 1 cycle Capacity: 1350 m² per hour Brush diameter: 350 mm Holding tank: 15 litre holding tank Clean water tank: 10 liter clean water tank Number of motors: 2 motors Battery: 24 V / 32 Ah battery Including: battery charger available Manual: manual available Condition: Unused in the original packaging Auction-ID: A3-46115-1355

Loading size 1200x800 mm, max. load capacity 1000 kg, permissible total weight tugger train 4000 kg, max. speed 6 km/h, 4 steered castors, 2 rigid castors Auction-ID: A1-51646-25

4 steered castors, braked version, ESD suitable Auction-ID: A1-51646-33

Loading size 1200x800 mm, max. load capacity 1000 kg, permissible total weight tugger train 4000 kg, max. speed 6 km/h, 4 steered castors, 2 rigid castors Auction-ID: A1-51646-26

4 steered castors, braked version, ESD suitable Auction-ID: A1-51646-31

Suitable for small load carriers 600x400 mm, stackable, 2 steered castors and 2 rigid castors, ESD compatible, max. load capacity 250 kg Auction-ID: A1-51646-45

Loading size 1200x800 mm, max. load capacity 1000 kg, permissible total weight tugger train 4000 kg, max. speed 6 km/h, 4 steered castors, 2 rigid castors Auction-ID: A1-51646-24

Suitable for small load carriers 600x400 mm, stackable, 2 steered castors and 2 rigid castors, ESD compatible, max. load capacity 250 kg Auction-ID: A1-51646-32

4 steered castors, braked version, ESD suitable Auction-ID: A1-51646-30

559,8m PVC sill. PVC molding cherry 001. PVC molding walnut. PVC molding triangle. PVC molding 019 - indian marble. PVC molding 07 - red marble. PVC molding 08 - GREEN marble. PVC molding - marble. Auction-ID: A7-40559-27

Charger included ; Hours: 476 hours ; This lot has not been tested for functionality. Parts may be damaged or missing. The seller does not guarantee traffic and operational safety; The removal of this lot must be carried out by the buyer independently with suitable vehicles and means of transport; Auction-ID: A1-51728-30

Can be professionally disassembled by buyer Only lighting included that is mounted against the mezzanine floor Stairs included (dimensions stair steps: 25X80 cm, 14 steps) Dimensions: - Length approximately 17m - Width approximately 19.5m - Ceiling height approximately 2.48m - Floor height approximately 2.78m Auction-ID: A3-46115-15079

Loading size 1200x800 mm, max. load capacity 1000 kg, permissible total weight tugger train 4000 kg, max. speed 6 km/h, 4 steered castors, 2 rigid castors Auction-ID: A1-51646-18

Item No. Layher Item No. Plettac Description 3862/307 1-E495630B-W Steel deck O-type 3m07x0m32 - USED Auction-ID: A1-51015-44

Unused; 300x300mm; Thickness 20mm; tiles are connectable to eachother Auction-ID: A1-51511-72

Item No. Layher Item No. Plettac Description 3862/307 1-E495630B-W Steel deck O-type 3m07x0m32 - USED Auction-ID: A1-51015-47

Item No. Layher Item No. Plettac Description 3862/307 1-E495630B-W Steel deck O-type 3m07x0m32 - USED Auction-ID: A1-51015-45

Equipped with knowledge R23/74 crane Max lifting capacity 6290 kilos extendable to 7.40 meters equipped with 2x steering axle Auction-ID: A1-47426-253

Equipped with: ramp, side storage boxes, winch inside, lashing rails, separate sitting area with kitchen unit, 2axles, step Auction-ID: A1-47426-1600

Item No. Layher Item No. Plettac Description 3862/307 1-E495630B-W Steel deck O-type 3m07x0m32 - USED Auction-ID: A1-51015-43

Item No. Layher Item No. Plettac Description 3862/307 1-E495630B-W Steel deck O-type 3m07x0m32 - USED Auction-ID: A1-51015-46

Equipped with Kennis R11.000 crane 1x extendable up to 11 meters 1x steering axle Auction-ID: A1-47426-255

Unused; 300x300mm; Thickness 20mm; tiles are connectable to eachother Auction-ID: A1-51511-71

Item No. Layher Item No. Plettac Description 3862/307 1-E495630B-W Steel deck O-type 3m07x0m32 - USED Auction-ID: A1-51015-7

1980 Floor FLO-15-28H 3-axle platform trailer – steered rear axle – 34,134 kg payload – 13.35 m Specifications: Brand: Floor Type: FLO-15-28H Year of construction / first admission: 1980 Version: flat semi-trailer / platform trailer Number of axles: 3 Axles: BPW 1st axle: fixed 2nd axle: fixed 3rd axle: forced steered Suspension: air suspension Brakes: drum brakes Brake force control: GRAU ALR, load dependent ALR type: 602.001.031 Chassis/reference number ALR plate: 4866-4872 Stock pressure brake system: 7.5 bar Own weight: 8.866 kg Maximum permissible mass: 43,000 kg Payload: 34.134 kg Wheelbase: approx. 7,510 mm Total length: approx. 13,350 mm Width: approx. 2,490 mm Load floor height: approx. 1,400 mm Tyre Size: 425/65 R22.5 Version: single wheel Tyre condition according to specification: approx. 95% Features: Flat wooden loading floor Heavy st ...

disk brush 510mm; squeegee width 850mm; clear water tank 55L; Recovery 60L; work capacity 2000m/h; Voltage 24V; Battery 200Ah212V; Power 1500W; self-driven; battery monitor; light; speed regulator; horn; Charger; manual; Auction-ID: A1-51936-567

unused; in cardboard box; Battery voltage: 24 V; Power: 550 W; Continuous working time: 4-5 hours ; Clean water tank: 45 L Capacity; waste water tank: 50 L; Cleaning efficiency: 2500 m²/h ; Suction diameter: 830 mm ; Brush pressure: 30 kg ; Suction power: 12 KPa ; IP degree: IPX4; Weight: 145 kg; self-driven; digital display; v.v. password; 8553 Auction-ID: A1-51936-412

Mint in original packaging with table and monitor mount Auction-ID: A1-51921-125

disk brush 510mm; squeegee width 850mm; clear water tank 55L; Recovery 60L; work capacity 2000m/h; Voltage 24V; Battery 200Ah212V; Power 1300W; battery monitor; light; speed regulator; horn; Charger; manual; Auction-ID: A1-51936-566

disk brush 400mm; squeegee width 580mm; clear water tank 25L; Recovery 30L; work capacity 1500m/h; Voltage 12V; Battery 40Ah212V; Power 900W; brush disk motor 400W; suction motor 500W; 2000RPM; battery monitor; build-in Charger; manual; Auction-ID: A1-51936-565

Norton Clipper CS 7.5 E Electric Floor Cutter Motor power: 7.5 kW Frequency: 50 Hz Voltage: 400 V Max. disc diameter: 800 mm Blade holder: 25.4 mm Max. cutting depth: 320 mm (with 800 mm disc) Including new 600 mm diamond blade Dimensions (L x W x H): 1,300 x 720 x 1,000 mm Tested for function – No warranty Used On-site test possible on viewing days Delivery is made with the scope shown in the pictures. All dimensions, performance and weight specifications are approximate and non-binding. Auction-ID: A1-51934-1

24V/32Ah; clean water tank 10L; dirty water tank 15L; work efficiency 1350m2/hour; unused in transport crate; 6744 Auction-ID: A1-51936-406

Unused in packaging; suitable blade size 350-500mm; 13HP; maximum depth 17cm; Rotation lever for height adjustment; 40L water tank; without saw blade; unused; 6529 Auction-ID: A1-51936-323

disk brush 350mm; squeegee width 450mm; clear water tank 20L; Recovery 25L; work capacity 1350m/h; Voltage 24V; Power 900W; brush disk motor 400W; suction motor 500W; battery monitor; Charger; manual; key-card; Auction-ID: A1-51936-564

Norton Clipper CSB1 P21 Petrol Floor Cutter Year of construction: 08/2020 Serial Number: 45028228844008 Engine power: 15 kW / 20 hp Speed according to nameplate: 1,775 rpm Max. diamond wheel diameter: 600 mm Blade holder: 25.4 mm Max. cutting depth: 225 mm Weight: approx. 240 kg Measured overall dimensions (L × W × H): approx. 1,200 × 650 × 1200mm Defective: The alternator no longer charges the battery. The engine starts and runs. The machine is expressly sold as defective. An on-site functional test is possible on the viewing days. Defective – No warranty Used On-site test possible on viewing days Delivery is made with the scope shown in the pictures. All dimensions, performance and weight specifications are approximate and non-binding. Auction-ID: A1-51934-34

Fine boring head, spindle tool, boring head, bridge tool, fine boring headBoring tool, spindle headBoring tool, spindle headBoring rodReceptacle for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731 200Boring head for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-010Boring block for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-500Counterweight for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-600Tool holder: GRAFLEX Holder size G7 = 46 mmProcessing diameter: 200-280 mmAdjustment accuracy: 0.01

All unused Auction-ID: A7-51245-76

Also from Kaiser, weight 4kg Auction-ID: A7-51245-16

Manufacturer: BURKHARDT + WEBER GmbH Model (Typ): MC 100 S0 Machine Type: CNC Horizontal Machining / Boring Center (floor-type) Country: Germany Delivery Date: July 1992 Series: MC Series (Modular Machining Centers) Travels X (Column travel): ~3,000 – 5,000 mm Y (Vertical): ~2,000 – 2,500 mm Z (Ram): ~800 – 1,200 mm W (Spindle quill): ~500 – 800 mm Spindle Diameter: 100 mm (this is what MC 100” refers to) Spindle Taper: ISO 50 / SK50 Spindle Speed: ~2,000 – 3,000 rpm Main Motor Power: ~30 – 50 kW Auction-ID: A1-51153-37

ISCAR – Assortment of axial grooving lathes / face grooving tools Assortment of various axial grooving lathe bits and face grooving tool holders from the manufacturer ISCAR. For the production of ring-shaped grooves and grooves on end faces as well as for other grooving and turning work on lathes. Various sizes and designs. Used condition, unchecked. Scope and condition according to illustrations. Auction-ID: A1-51933-24

Ref. -No.: 10721 Manufacturer: DOOSAN Year of construction: 2008 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Southkorea X-Travel: 4.000 mm Y-Travel: 2.000 mm Z-Travel: 1.600 mm W-Axis: 700 mm Bore Spindle Diameter: 130 mm Spindle Taper: BT 50 Table Load: 15.000 kg Milling Spindle Diameter: 240 mm Spindle Speed: 2.500 RPM round table: 1.800 x 2.000 mm Further information: INCLUDED EQUIPMENT & ACCESSORIES Electronic handwheel Chip conveyor 3-colour signal light (green, red, yellow) Spindle cooling unit External coolant system Through-spindle coolant (TSC), 15 bar Foundation bolts and mounting pads Maintenance tools and tool cabinet Chip protection covers (Type A+B, table and operator side) ADDITIONAL INFORMATION Machine colour: Manufacturers standard The machine is offered including the equipment and accessories listed above.

spindle diameter:130 mm spindle diameter:130 mm x-travel:2190 mm y-travel:1520 mm z-travel:1000 mm w-axis:1075 mm table surface area:2000 x 1800 mm workpiece weight max.:8000 kg spindle turning speed range:4,5 x 900 U/min spindle taper: ISO:50 faceplate turning speed range:4,5 x 180 U/min faceplate diameter:785 mm rapid traverse::5000 mm/min total power requirement:40 kW weight of the machine ca.:35 t dimensions of the machine ca.:5,5 x 6,9 x 5,2 m Machine retrofit and overhould with TNC 360 Heidenhain in 2023 and stepless spindle speeds - table indexing 4 x 90° - facing head 785 mm - exhauster - various arbors and tooling

bore capacity in steel (diameter):- mm throat:- mm bore stroke:- mm x-axis:1.800 mm y-axis:1.600 mm z-axis:1.250 mm w-axis:630 mm max. table load:5.000 kg table length:1.400 mm table width:1.600 mm spindle diameter:105 mm spindle turning speed range:3.300 U/min numbers of positions in the tool changer:40 internal coolant system feed:40 bar Splash guard around rotary table Chip Conveyor Oil cooling unit (chiller) Touch probe Renishaw RMP60 Upgrades in 2024 and 2025 Retrofit of X and Z axis ball screws at producer ? KSK Kurim CZ New linear scales Heidenhain in X and Z axis including cabling retrofit of Z axis - new Biplast V lining on guideways, hand scraped Biplast lining on Z axis new TOS Varnsdorf parts for tool clamping and automatic tool changer arm Overhaul of X, Z and Y axis feed motors at authorized Siemens service (new bearings and sensor) New Siemens hand wheel

spindle diameter:100 mm x-travel:1250 mm y-travel:1100 mm z-travel:950 mm spindle turning speed range:2500 U/min Rotary-table:1100 x 1000 mm table surface area:1000 x 1100 mm tool clamping:69871 DIN spindle stroke:630 mm spindle taper:SK50 total power requirement:22/34 kW max. workpiece weight:3000 kg weight of the machine ca.:13000 kg

x-travel:3500 mm y-travel:2500 mm z-travel:1250 mm w-axis:800 mm bore spindle speeds:2500 U/min table load:12 t dia. of rotary table:1800 x 2200 mm numbers of positions in the tool changer:60 ? Overhauled in 2025 and 2026 ? The spindle was relubricated and new spindle bearings fitted in 2025 by technicians from TOS Varnsdorf ? 12-month warranty and guarantee on geometric accuracy Scope of repairs to the X, Z and B axes 1. Complete dismantling and cleaning of the machine bed for the X and Z axes as well as the B axis 2. Regrinding of X and Z axis guide ways at Czech manufacturer of CNC horizontal boring machines 3. Removal of the old lining from the X- and Z-axis slides and the B-axis 4. Anchoring of re-grinded X and Z axis machine bed 5. New, hand-scraped lining made from Biplast-V on the X- and Z-axis slides, and from new Biplast-V on the B-axis 6. Installation of ball screws, lin ...

spindle diameter:150 mm x-travel:3.000 mm y-travel:2.000 mm spindle stroke:700 mm dimension of the ram:340 x 340 mm ram stroke:700 mm column travel:1.500 mm high speed spindle taper ISO:50 bore spindle turning speed range:3,2 - 1.600 U/min table surface area:2.000 x 2.500 mm max. table load:25.000 kg rapid traverse speed:5/10 m/min feed speeds:1 - 1.500 mm/min faceplate speeds from - to:3,2 - 140 U/min dimensions of the machine ca.:8,4 x 6,8 x 5,9 m weight of the machine ca.:57 t total power requirement:100 kW Full B-axis Aerostatic guides Coolant system with IKZ

spindle diameter:130 mm x-travel:5000 mm y-travel:3000 mm z-travel:2000 mm The TOS Varnsdorf WHQ 13 CNC is a high-performance CNC-controlled horizontal table drill press fitted with a Siemens Sinumerik 840D CNC control system, designed for the precise machining of large and heavy workpieces. The machine is suitable for drilling, boring and milling complex components and is typically used in heavy machinery manufacturing, plant engineering, toolmaking, and in the energy and heavy industries. With generous travel ranges of 5,000 mm on the X-axis, 3,000 mm on the Y-axis and 2,000 mm on the Z-axis, the machine offers an extensive working area. The worktable, measuring 2,500 × 1,800 mm, can accommodate workpieces weighing up to 20 tonnes. The horizontal spindle achieves a speed of up to 3,000 rpm. In combination with the supplied milling head, even demanding milling operations and various ma ...

spindle diameter:150 mm x-travel:3000 mm y-travel:2000 mm spindle stroke:700 mm dimension of the ram:340 x 340 mm ram stroke:700 column travel:1500 mm spindle taper ISO:50 bore spindle turning speed range:3,2 - 1600 U/min table surface area:2000 x 2500 mm max. table load:25000 kg rapid speed:5 / 10 m/min feed speeds:1 - 5000 mm/min total power requirement:100 kW weight of the machine ca.:57 t dimensions of the machine ca.:8,4 x 6,8 x 5,9 m with CNC SIEMENS 840 D full B-axis aerostatic guideways facing head ( 3,2 - 140 rpm ) angular milling head 1000 Nm coolant attahcmnet with internal cooling supply