fliegl used for sale

Infrared camera system FLIR ThermaCAM P60 PAL To detect, collect, analyze and document of thermal conditions in industrial and automotive technology needed from business, built in 2004, little used, has in the meantime been calibrated with documentation

Waerme image camera Manufacturer Flir Type P20 Separate monitor Charging device for 2 Li batteries 1 battery available Cable Suitcase Camera fully functional, good condition, see pictures Special price

Fliss bohrer and thread rolling NC machine. Machine was rebuilded in 2019, complete Hardwere, and pneumatic components, and part from electric. Machine can be used for serial tube production, can be aded Robot for manipulating. Machine will be able to connect with a handling robot for fast delivery and high productiion.

Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, temperature switch, thermostat, expansion valve, valve upper part -Manufacturer: Flica, valve upper part unused in original packaging -Type: TMVL (X) R134a -Operating range: +15 to -30 °C -Dimensions package: 135/80/H50 mm -Weight: 0.4 kg

Technical data Voltage 50 Hz 3x: 220/380 Volt Machine´s weight about: 60 kg Overall dimensions machine: Length: 800 mm Width: 600 mm Height: 800 mm

Stainless steel filter press Type 20 x 20

Size: 2.000 x 6.300 mm - Year of Manufacture: 2003 - With frame

Size: 3.000 x 8.820 mm - Year of Manufacture: 1994 - With part of frame and conveyor belt - Vibrating screen will be overhauled, sandblasted and painted.

Size: 2.000 x 5.460mm. - With part of frame, E.Motor and Rubber springs

Size: 1.000 x 3.780 mm - Included frame - Will be overhauled, sandblasted and painted

- SP Flipping Wheels - 1 set with 10 pieces - HP Part Number CA397-02650 - for HP Indigo Series 2 Machines

Binder Bivitec Sieve Machine Brand: Binder Type: Bivitec flip flop Screen area : 9500 x 1900 mm – 1 decker Drive: Electric motor 30 kW

Screening machine Hein Lehmann Brand: Hein Lehmann Type: flip/flop Screen area : 5300 x 1500 mm - 1 decker Drive: 11 kW electric motor Incl.: base.

Here we sell a flake crusher from KoMo FlicFloc which is very beautiful, practical and child's play. New with packagingDetails see picture FlicFloc flake crusher not only crush oats, but of course also pretty much any other grain. Whether wheat, rye, spelt, green spelt, etc. But that's not all, seeds and seeds can also be wonderfully processed into flakes (e.g. flaxseed, hemp seeds, sesame, poppy seeds and many others) Even pseudo-grains such as quinoa and amaranth can be processed by the FlicFlac. This means that you can simply prepare your muesli fresh in the morning! You will receive a manufacturer's warranty from the date of purchase and an invoice with VAT. You can pick up on site and pay cash

Formats: 84x18x78/ 84x24x78/ 94x18x94/ 94x24x94/ 95x18x120/ 95x24x120mm, connected load: 2kW.

SPECIFICATIONS: Min. length of veneer strip: 350 mm Min. width of veneer strip: 45 mm Veneer thickness: 0.3 - 1.5 mm Working height: 970 mm Temperature control: 0 - 200° C

Description: min. working ,dimensions: 300 x 120/70 mm panel thickness: 12 - 55 mm axis speed: X-axis: ,95 m/min Y- ,axis: 55 ,m/min W-axis: 40 ,m/min Z-axis: 18 m/min spindle motor power: 1.5 kW spindles: 18 saw motor power: 1.5 kW electrospindle power: 5.5 kW electrospindle rotational speed: 9000/18000 rpm max. tool diameter: 20 mm  , return tables are not included in the offer  , please also have a look at the video and the PDF documents of this machine Approx. Onsite Dimension. (l x w x h): 3,000 x 5,000 x 2,800 mm, weight approx.: 2,500 kg

Tenoning spindle: 2 St. Number of milling agregates: 7 St. Spindle diameter: 50 mm control: Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial CNC spindles as well as VARIO table and milling carriage Machine can be seen in use for a short time! Technical data summary (please inquire about any additional accessories included) crosscut saw > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser directional light to detect the saw section > Axial adjustment path 150 mm NC axis, electronically infinitely variable > Radial pneumatic adjustment path 8 positions for e.g. edge rounding from above Rounding aggregate > Position: horizontally below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: ...

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ---------------------------------------------------------------------- - Short summary: ---------------------------------------------------------------------- - 6 spindles with 8,000 rpm 5 x HSK/Powerlock Axial and radial CNC adjustment of the spindles via control CNC - controlled adjustment and positioning of the feed Detailed description: ---------------------------------------------------------------------- - Technical specifications: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 6 1. Tool holder - below ------------------------------------------------ Motor with brake: 5.5 kW Spindle diameter: 40mm Speed: 6,000 rpm Tool flight circle: 93 - 160 mm ...

Tenoning spindle: 2 St. Number of milling agregates: 7 St. Spindle diameter: 50 mm Control: CNC, Weinig PC-Nexus Weinig Uncontrol 12 with radial and axial CNC spindles and VARIO table .. The machine has already been professionally dismantled and stored in 73447 Oberkochen Specifications summary (please inquire about any additional accessories included) .. crosscut saw .. > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 3000-6000 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser guide light for detecting the sawing section > Axial adjustment path 150 mm NC axis, electronically stepless > Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from above rounding aggregate .. > Position: horizontally below > Axial adjustment path together with the crosscut saw. electronic len ...

Tenoning spindle: 1 0 Number of milling agregates: 5 St. Spindle diameter: 50 mm control: Weinig, PC-Nexus # 2732 Weinig Unicontrol 6 with NC spindles ------------------------------------------------ Machine is in checking process at the moment! Technical data summary (please inquire about any additional accessories included) Pos. 1: Crosscut saw ------------------------------------------------ > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3 kW > Adjustment path radially pneumatically controlled to 8 positions, e.g. for edge rounding from above > Laser directional light to detect the saw section Pos. 2: Rounding unit horizontally at the bottom ------------------------------------------------ > Position: horizontally below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length 25 mm > Spindle spee ...

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. Control: Weinig PowerCom Weinig Powermat 500 for window production --------------------------------------------- Machine will be checked at our warehouse Short summary: --------------------------------------------- 6 Spindles with 8,000 rpm and 7.5 KW 5 x HSK/Powerlock Window package with glazing bead separation Spindles axially and radially CNC controlled right and upper spindles with common pneumatic timing for Glazing bead cutting Large control Powercom with touchscreen Detailed description: --------------------------------------------- Tool arrangement No. 018 for window production Technical specifications: --------------------------------------------- Working width 20 - 230 mm (at tool cutting circle 93 - 125 mm) Working height 8 - 120  ...

Number of boring spindles: 6 St. Working width: 230 mm Working height: 120 mm 1 WEINIG planing and moulding machine Unimat 23 - 6 spindles, year 2000 Machine will be checked by our technicians! -------------------------------------- Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle below 5.5 KW mechanical brake Diameter 40mm Speed 6000 rpm Tool flight circle 125 - 180 mm Folding device including tools Table insert hardened in front of the 1st lower spindle 2nd spindle right 7.5 KW mechanical brake common motor with left vertical spindle Diameter 40mm Speed 6000 rpm Tool flight circle 112-250 mm Max. tool diameter behind stop level 203 mm Max. throat depth 35 mm Adjustment path axial 80 mm Right spindle pneumatically axial via selector switch (40 mm) controlled. 3. Spindle on the left common motor with 2nd spindle Diameter 40mm Speed 6000 rpm Tool flight circle 112-200 mm Ma ...

Brand: MARTIN Type: T90 with 7 spindles Feed table: 2000 mm Table height adjustment: Max. Spahnabname 10 mm Stop bar: Manual adjustment 10 mm Planer width: 22 - 240 mm (260 possible with ingekammerte planing heads) Planer thickness: 5 - 170 mm 1. Planer shaft dresser: Spahn removal max. 10 mm, clamping length 240 mm, flight circle min. ø100 mm - max ø125 mm, Z-4, 6.000rpm, 7.5 KW 2&3. Spindle: Vertical callibrier planing and contour shafts, Spahn removal max. 10 mm, clamping length 160 mm, flight circle min. ø100 max ø125 mm, Z-4, 6.000 rpm, 7.5 KW 4. Thickness shaft/upper shaft: horizontal spindle tap removal: max. 8.5 mm, clamping length 240 mm, flight circle min. ø100 mm - max ø125 mm, Z-4, 6.000rpm, 7.5 KW 5. Top spindle 2nd profile shaft horizontal, Spahn removal: max. 8.5 mm, clamping length 240 mm, flight circle min. ø100 - max ø180 mm, 6.000 rpm, 7.5 KW, adju ...

Bausch complete vial line including labelling and inspection in „as-new condition comprising: Bausch type 721 De-bagging machine for vial tubs size 221 x 379 x 49.5 mm, with oRABS Bausch type 411 enclosed sterile transfer chamber to decontaminate outer surfaces using 4 UV light lamps Bausch type 721 De-lidding and de-nesting of the vial tubs under isolator Bausch type 534 filling and closing machine for stoppers/rubber bungs, operates under class A conditions into an isolator for toxic products, rotary infeed table, pre- and post-weighing for the In-Process Control (IPC) of a 100% weight verification of each vial, pre-gassing with nitrogen, dosing using 4 peristaltic pumps with a filling accuracy of up to +/-1% Bausch type 551 closing machine for aluminium crimp caps and flip-off with rotary infeed table, under isolator Bausch type 309 cleaning machine for external washing, rinsi ...

Tenoning spindle: 1 St. Number of milling agregates: 4 St. Spindle diameter: 50 mm Weinig Unicontrol 6 with NC spindles ----------------------------------- Technical data summary (please inquire about any additional accessories included) ... Generally ----------------------------------- > Loading dimensions: 7000 x 2400 x 2400 mm > Machine weight, approx.: 3700 kg crosscut saw ----------------------------------- > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3 kW > Laser directional light to detect the saw section Electronically safe length stop ----------------------------------- > Length 3600 mm 1. Tap and slot spindle ---------------------------------- > Number of tools: 3/4 pieces. > Tool clamping length: 320 mm > Spindle stroke vertical adjustme ...

Number of spindles: 4 St. Number of tools: 11 St. Spindle diameter: 50,40 mm Spindle length: 285,125 mm length: 4000 mm width: 2000 mm height: 2200 mm Weinig Univar 10/3 folding machine --------------------------------- Machine will be cleaned and chcked before delivery For milling around windows, doors and the like with uneven circumferential profiles. Machine suitable for wood thickness 68 to 92 mm Time required per frame milling, medium size 1.20 x 1.20 m - approx. 2 minutes. The available tool positions are selected using a selector switch on the control panel retrieved. Machine with 3 hydraulically controlled right precision Lifting spindles for holding 3 tool sets, 2 x 95 mm spindle stroke per spindle The spindle stroke takes place in a U-movement, so that the opening is possible for short parts The milling stop remains as small as possible. Spindle stroke horizontally fine Adjusta ...

Parallel lathe Geminis GE650S to be rebuilt. Distance between points: 1000mm. Flip on bench: 680mm. Flip on cart: 410mm. Flip over neckline: 850mm. Main hole: 84mm. Motorized trolley and charriot. Speeds: 18 (13-1000rpm). Main engine: 15hp. Plate and trolley protections and CE RD1215/97 certificate. Quick-change plate and turret.

Tenoning spindle: 1 St. Number of milling agregates: 4 St. Spindle diameter: 50 mm Control: Weinig, PC-Nexus #2654 Weinig Unicontrol 6 with NC spindles ---------------------------- Specifications summary (please inquire about any additional accessories included) Pos. 1: Crosscut saw ---------------------------- > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.0 kW > Laser guide light for detecting the sawing section electronic length stop, mounted on slotted table included Positioning of the cross-cut saw integrated in the control. > Length 3500mm Pos. 2: tenoning spindle ---------------------------- > Number of tools: variable, infinitely variable NC axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjus ...

Profile milling machine Bäuerle - Cross section milling machine Type: PM 510 Machine No. 126/91 Year of construction: 1991 Table size 1250 x 410 mm Tool span 510 mm Tool flight circle diameter max. 250 mm Milling height max. 250 mm Milling depth 65 mm Milling spindle diameter 40 mm Table height 870 mm Motor power 18.5 kW, 380 V, 50 Hz, 35 Amp. Working cycles per minute max. 6 Operating pressure max. 6 bar Air consumption 140 l/min. Feed speed 0 – 4.5 m/min. Revolutions per minute at flight circle diameter 180 mm 6000 rpm Revolutions per minute at flight circle diameter 200 mm 4800 rpm Suction nozzle diameter 160 mm with 16 mini tine milling cutters 15 mm cutter width on 500 mm total width with instruction manual Weight: 780 kg Machine dimensions L 1250 mm x W 1270 mm x H 1600 mm

Number of boring spindles: 3 St. Number of tools: 1.3/4.1. St. Spindle diameter: 50,40 mm Spindle length: 120,320,125 mm weight: 2500 kg loading dimensions L x W x H: 3800x1400x2000 mm table length: 3470 mm Weinig Univar 6 P In order to sell ---------------------- Operating voltage: 380 volts, 50 periods. For milling around windows, doors and similar with uneven edges Profiles. Arrangement of the aggregates: 1. Synchronous spindle on the right, pneumatically clocked. 2. Profiling spindle on the right 3. Fitting spindle Profiling spindle suitable for holding several tools one on top of the other. Spindle movement pneumatic. The 1 spindle works in synchronization for tear-free milling. Respectively This spindle plunges the last 100 mm of a frame end with the Insert the appropriate tool into the wood to prevent tearing at the frame corners avoid. Machine stands, tables, stops: Machine body  ...

Tenoning spindle: 1 St. Number of milling agregates: 4 St. Spindle diameter: 50 mm control: Südtron BT 20 Weinig Unicontrol 6 --------------------------------- General data --------------------------------- Loading dimensions approx. 5000x2400x2400 Machine weight approx. 3000 kg crosscut saw --------------------------------- > Pneumatic crosscut saw, against 8-fold turret stop > Spindle speed: 2800 > Spindle diameter: 40 mm > Tool diameter max.: 350 mm > Motor power: 3 kW > Laser directional light to detect the saw section Length stop - clocked --------------------------------- > Length stop 2700 mm 1. Tap and slot spindle --------------------------------- > Number of tools: 3/4 pieces. > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses IV 68-92 > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 ...

Make: Alcos Material: CRS, HRPO, EG, GL, Pre-Paint Max Shear Strength: 50,000 PSI Max Yield Strength: 65,000 PSI Material Width: 12″ – 72″ Material Thickness: .015″ – .135″ Weight: 60,000Lbs Coil OD: 12″ – 72″ Coil ID: 20″ – 24″ Stacker Weight: 20,000Lb Max Line Speed: 250 feet per minute Direction: L–R 4-Arm Entry Tursntile Model: ST4-60K-72 Entry L-Type Coil Car Model: FCC-60K-72 Mandrel Uncoiler 4-Leaf Pumpkin Tooth Mandrel Powered Expansion Water Cooled Brake Hydraulic Feed Up Drive Sliding Base Powered Out-Board Support Hydraulic Peeling Table Driven Entry Pinch Rolls Hydraulic Entry Crop Shear Adjustable Edge Guides Scrap Receiving System Alcos 5-Hi Precision Leveler Model: 175-5H-72 Entry & Exit Driven Pinch Rolls Work Rolls Diameter: 1.75″ Number of Work Rolls: 19 Nine (9) Back Up Flights 150HP DC Motor Drive ...

ZENO double roller vorader ZDV 2500x2000, mobile on chain suspension, with discharge conveyor and magnetic separator, drive power 298 kW, 1900 rpm, MTU diesel engine, rotor flight circuit 575 mm, 2 x 12 rotor tools on tool holders, new design demonstration machine. ZENO Twin rotor shredder ZDV 2500x2000, mobile on chain chassis, incl. discharge conveyor and magnet separator, motor power 298 kW, 1900 rpm, MTU diesel motor, rotor flight circle 575 mm, 2 x 12 cutting inserts on tool holder, show machine.

Inlet cross-section: 3,000 x 2,000 mm Rotors: 2 pcs. Rotor flight circuit: 565 mm each Rotor version: 2 x 25 pcs. cutting plates on tool holders Drive: 4 x 45 kW Weight: approx. 18,000 kg Intake opening: 3,000 x 2,000 mm Rotor system: Twin rotor Rotor flight circle: 565 mm each Cutting system: 2 x 25 pcs. cutting inserts on toolholder Engine power: 4 x 45 kW Machine weight: approx. 18,000 kg

Inlet cross-section: 1200 x 1600 mm Drive: 110 kW, without gearbox Rotor flight circuit: 380 mm Rotor speed: approx. 470 rpm Rotor design: 66 cutting plates on tool holders Screen version: solid screen basket, reinforced with ribs Sieblochung: 15 mm Counter knife: with cutting gap adjustment Machine weight: approx. 5,900 kg Intake opening: 1,200 x 1,600 mm Engine power: 110 kW, without gearbox Rotor flight circle: 380 mm Rotor speed: approx. 470 rpm Cutting system: 66 cutting inserts on toolholder Screen: reinforced screencage, 15 mm perforation Counter knife: with mechanical adjustment device Machine weight: approx. 5,900 kg

Decanter Alfa Laval Foodec 700 in excellent conditions. Control Panel not included Decanter Foodec 700 Yr : 2012 Description Bowl : 2 or 3 phase version: 2 phases - open Maximum main speed: 3100 rpm Bowl length: 2565 mm Bowl diameter: 650 mm Beach angle: 20° Solids discharge type: 360°-type with 8 wear liners Solids discharge radius: 175 mm Wear protection solids discharge: Wear liner in tungsten carbide, 8 pieces Solids transportation aids, cylindrical section: Ribs Solids transportation aids, taper section: Ribs Material - hubs: AL 111 2329 (Duplex stainless steel) Material - bowl shell: AL 111 2329 (Duplex stainless steel) Material - bolts: A4-80 (AISI 316) Liquid outlet, type: 8 Standard Plate Dams Conveyor : Features: Windows / Double cone Feed zone type: Esbjerg with exchangeable wear liners (EU3) Pitch: 1x230 mm Flight inclination: Perpend ...

COMBINATION OF FLOUR MILL AND FLOCKERIn the combination appliance is equipped with the two classics FIDIBUS MEDIUM and the FLICFLOC. In the FLICFLOC, two cone-shaped and naturally nickel-free stainless steel rollers rotate in high-quality ball bearings ? And that almost by itself. The mill has a 360 watt industrial motor and self-sharpening millstones made of corundum ceramics that grind 100 g of fine flour per minute. Whether green spelt, chickpeas or rice? 850 g of grain fits into the hopper. Enough to prepare 1 kg of wholemeal bread. The funnel of the flaker holds up to 190 g of oats and conjures up flakes for your morning muesli in no time at all. 360 watts, grinds 100 grams of wheat per minute several times the amount at a coarser setting? Hopper capacity: 850 g (wheat/mill), 190g (oats/flocker)? Grinder: Corundum/ceramic infinitely adjustable? Grinding fineness Air jet screen metho ...

COMBINATION OF FLOUR MILL AND HAND FLOCThe combination device is equipped with the two classics FIDIBUS 21 and the FLICFLOC. In the FLICFLOC flaker, two cone-shaped and naturally nickel-free stainless steel rollers rotate in high-quality ball bearings ? And that almost by itself. The flour mill has a 250 watt industrial motor and self-sharpening millstones made of corundum ceramics that grind 100 g of fine flour per minute. Whether green spelt, barley or spelt ? 850 g of soft cereals fit into the hopper. Enough to prepare 1 kg of wholemeal bread. The funnel of the flaker holds up to 190 g of oats and conjures up flakes for your morning muesli in no time at all. 250 watts, does 100 grams of wheat per minute grind several times the amount at a coarser setting? Hopper capacity: 850 g (wheat/mill), 190 g (oats/flocker)? Grinder: Corundum/ceramic infinitely adjustable? Grinding fineness Air j ...

Cut-to-length line Delta-Alcos 72”x0.5”x60,000Lb (A3770) Make: Delta / Alcos Material Width: 36" - 72" Thickness Capacity: .048" - .530" Weight Capacity: 60,000Lbs Coil ID: 16" - 24" Coil OD: 72" Yield Strength: 50,000PSI Direction: Right to Left Coil Storage Conveyor Entry Coil Car Hydraulic Lift and Traverse Cone Uncoiler DC Motorized Brake Sliding Base Wichita Cooled Brake Powered Hold-Down Roll Hydraulic Peeling Table Powered In & Out Set of Driven Pinch Rolls Delta Corrective Plate 4-Hi Leveler Number of Work Rolls: 9 Work Roll Diameter: 8" Work Roll Width: 82" Powered Up & Down Back-Up Flights DC Motor & Drive Delta Corrective 4-Hi Leveler Number of Work Rolls: 19 Work Roll Diameter: 4" Work Roll Width: 82" Motorized Back-Up Flights Powered Work Roll Adjustment DC Motor & Drive Alcos Mechanical Shear Down Cut Shear Driven Entry Pinch Rolls  ...

Used Bodini Crate Washer up to 800 Crates per Hour Efficient Crate Handling with Flipper Mechanism of the Crate Washer Bodini up to 800 crates par hour Renowned for efficiency the Bodini crate washer employs a specialized flipper mechanism Consequently crates are properly oriented for washing reducing manual labor Furthermore this feature enhances productivity by minimizing errors in operation Versatile Design for Various Crate Formats of the Crate Washer Bodini up to 800 crates par hour Flexibility is a hallmark of the Bodini crate washer Thanks to its versatile design the washer adapts to various crate heights This adaptability ensures seamless integration into existing bottling lines Consequently businesses can optimize operations effectively Dual Cycle Washing for Optimal Cleanliness To ensure optimal cleanliness the Bodini crate washer utilizes a dual cycle washing system During the ...

Key data: 5 , 230 mm, 140 mm

Four-sided slicer Weinig Type: Unimat 23 Year of construction: 1992 Planing width 20 - 230 mm for tool flight circle D = 140 mm Planing height 6 - 140 mm for tool flight circle D = 125 mm 5 waves: 1. Bottom 5.5 kW 2. Right 5.5 kW 3. Left 7.5 kW 4. Top 7.5 kW 5. Bottom 5.5kw Spindle diameter 40 mm Feed speeds 6 – 29 m/min. Waxilite Pump Manual with distributor for suction hoses complete with planer heads machine has always been well maintained and is in good, ready-to-use condition.

Folding carton adhesive machine for CD cases equipped with friction feeder, transport route, press station, suitable for the following products: CD / DVD covers, envelopes, flat slippers, flight ticket bags, presentation folders.

intake opening: 2,500 x 2,000 mm rotor flight circle: 580 mm each rotor execution: special teeth motor power: 2 x 90 kW with planet gears weight: approx. 18,500 kg

The MATEC HMS-350 Kleinshredder for professionals, with hammer mill is suitable for crushing of green waste, etc. All types of green waste such as bouquets, garden waste, potted plants, compost in each State, agricultural waste, Earth, cemetery waste, large wood chips and small wood waste, etc. can thus be crushed. The hammer mill is equipped with impact tools made of HARDOX, the appropriate anvil blow bar and the following "data" also made of HARDOX. The content of flower pots, flower boxes, "baked together" grass cutting, etc. can thus be crushed. The combination of anvil blow bar before calibration and subsequent anvil calculation for fine crushing results a high throughput capacity with a small expenditure of energy. Electric motor 7.5 kW, a diesel engine can 3x400V, 50 Hz, power outlet connection euro 32 A request be built up 350 mm diameter insertion slot flight circle diame ...

Important and distinguishing design features of the RaptorX SL steel base machine / gantry RaptorX-SL1200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method t ...

Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL3200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objec ...