flat used for sale

cutting diameter: 305 mm capacity 90 degrees: flat: 350 x 200 mm capacity 90 degrees: square: 260 mm capacity 45 degrees: flat: 230 x 200 mm capacity 45 degrees: round: 250 mm capacity 45 degrees: square: 230 mm capacity 60 degrees: flat: 170 x 100 mm capacity 60 degrees: square: 155 mm capacity 60 degrees: round: 175 mm turning speed range:: 18 – 110 m/min dimensions of saw-band: 3.375 x 27 x 0,90 mm work height max.: 880 mm total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 840 kg dimensions of the machine ca.: 1.900 x 1.850 x 2000 mm Furnishing : - Miter left 45 ° automatic operation - Miter left 60 ° semi-automatic operation - Saw material and feed unit - Fine adjustment of the feed and manual cut - Capable of full material - Material detection - Vertical vice - Sacrificial material turntable - CNC Control including special accessories (): - SET GBS 305 micro spray ...

cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: square: 250 x 250 mm capacity 60 degrees: flat: 170 x 170 mm capacity 60 degrees: square: 170 x 170 mm capacity 60 degrees: round: 180 mm turning speed range:: 40 / 80 m/min dimensions of saw-band: 3320 x 27 x 0,9 mm engine output: 1,5 / 1,8 kW weight: 670 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I-beam section - flat steel: 220 bei Dm 1200 mm I-beam section - upend: - mm angular steel - leg outwards: 110x110x14 bei Dm 1000 mm angular steel - leg inwards: 80x80x10 bei Dm 1000 mm flat steel flat: 100 x 20 bei Dm 1000 mm T-steel / side out: 120x120x13 bei Dm 1200 mm U-iron on the x-axis: 22 bei Dm 1200 mm pipes: 102 x 6 bei Dm 900 mm round material: 75 bei Dm 700 mm square material: 60 x 60 bei Dm 600 mm bending speed: 3,5 m/min No. - Rolls: 3 Drive: 7,5 kW shaft diameter: 125/135 mm weight: 6,4 t dimensions of the machine ca.: 2,1 x 2,4 x 1,5 m Condition: ready for operation: Electric 380 Volt: Set of standard rolls: I + H Motorized adjustable rollers: Control panel: Central lubrication: autom. Rolls for round material: 100 mm Machine manual: Heavy ASYMETRIC ring bending machine with mot. adjustment of both infeed rollers and mot. adjustment of the two lateral guide rollers,  ...

saw blade diameter: 400 mm cutting diameter: 130 mm stroke: 135 mm mitter cutting - all-position: 0-45 ° turning speed range: 1420 / 2840 U/min capacity 45 degrees: square: 110 mm capacity 45 degrees: flat: 50 x 240 mm capacity 90 degrees: flat: 95 x 240 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 120 mm voltage: 400 V total power requirement: 3,7 / 4,5 kW weight of the machine ca.: 600 kg dimensions of the machine ca.: 1,15 x 1,20 x 1,60 m - Serial-No.: 102752 - cutting range round 130 mm - cutting range square 120 mm - cutting range flat 95 x 240 mm - vertical pneumatic clamping The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

speed: 35 - 70 m/min cutting diameter: 230 mm saw band length: 2720 x 27 x 0,9 mm cutting width: 130 mm cutting capacity - flat: 90° / 320 x 130 mm cutting capacity - round: 90° / 230 mm cutting capacity - square: 90° / 230 x 230 mm cutting capacity - flat: 45° / R 220x60 /L 230x140 mm cutting capacity - round: 45° / R 180 / L 220 mm cutting capacity - square: 45° / R 150 / L 190 mm cutting capacity - flat: 60° / 120 x 105 mm cutting capacity - round: 60° /120 mm cutting capacity - square: 60° / 105 mm total power requirement: 1,0 - 1,5 kW weight of the machine ca.: 390 kg dimensions of the machine ca.: 1,35 x 0,9 x 1,3 m The HU 230 DG is a popular sawing machine and is heavily sold, due to its favourable price-quality relation. With adjustable sawing pressure, coolant pump with reservoir and electrical-mechanical saw blade tension adjustment, this machine is ideal for large wor ...

cutting diameter: 230 mm saw band length: 2720 x 27 x 0,9 mm cutting width: 130 mm cutting capacity - flat: 90° / 320 x 130 mm cutting capacity - round: 90° / 230 mm cutting capacity - square: 90° / 230 x 230 mm cutting capacity - flat: 45° / R 220x60 /L 230x140 mm cutting capacity - round: 45° / R 180 / L 220 mm cutting capacity - square: 45° / R 150 / L 190 mm cutting capacity - flat: 60° / 120 x 105 mm cutting capacity - round: 60° /120 mm cutting capacity - square: 60° / 105 mm speed: 35 - 70 m/min total power requirement: 1,0 - 1,5 kW weight of the machine ca.: 410 t dimensions of the machine ca.: 1,35 x 0,9 x 1,3 m The BMSY 230 DG is a popular sawing machine and is heavily sold, due to its favourable price-quality relation. With adjustable sawing pressure, coolant pump with reservoir and electrical-mechanical saw blade tension adjustment, this machine is ideal for large wo ...

NC-controlled fully automatic circular saw Fabr. KALTENBACH Type KKS 400 NA / FMAFabr. -Nr: 104427 Year 1984Saw blade diameter: 400 mmCutting area round: 130 mmCutting area square: 120 mmCutting area flat: 315 x 40 mmU-profiles: 240 x 85 mmU-profiles 45 °: 180 x 70 mmCutting speed: 13/25 m / minSaw blade feed speed: 10-1200 mmRapid return of the saw blade: 1500 mm / minDrive power: 3.2 / 4.1 kWExternal dimensions: 12000 x 2500 x 1850 mmWeight without flat magazine approx .: 1350 kgWith- Flat magazine for material output lengths 1500 - 6000 mm- NC control without screen- Restelager before roller conveyor for remnants 1500 - 6000 mm in lengthused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available ...

cutting diameter: 270 mm saw band length: 3160 x 27 x 0,9 mm cutting width: 350 mm cutting capacity - flat: 90° / 350 x 220 mm cutting capacity - round: 90° / 270 mm cutting capacity - square: 90° / 260 x 260 mm cutting capacity - flat: 45°/ R 180x180/ L 240x160 mm cutting capacity - round: 45° / R 210 / L 240 mm cutting capacity - square: 45° / R 180 / L 240 mm cutting capacity - flat: 60° / 150 x 150 mm cutting capacity - round: 60° /160 mm cutting capacity - square: 60° / 150 mm speed: 34 x 68 U/min total power requirement: 1,5 kW weight of the machine ca.: 430 kg dimensions of the machine ca.: 31 m The HU 230 DG is a popular sawing machine and is heavily sold, due to its favourable price-quality relation. With adjustable sawing pressure, coolant pump with reservoir and electrical-mechanical saw blade tension adjustment, this machine is ideal for large workshops and small pro ...

Metal circular saw Fabr. MEP type Tiger 300Machine -No: 004968 / RPDCUTTING AREAS:0 ° round: 90 mm0 ° square: 85 x 85 mm0 ° flat: 150 x 70 mm45 ° round: 90 mm45 ° square: 85 x 85 mm45 ° flat: 90 x 60 mm60 ° round left: 60 mm60 ° square left: 60 x 60 mm60 ° flat left: 60 x 80 mmSaw blade size: 300 x 32 x 2.5 mm2 speeds: 30/60 rpm.Vise opening: 155 mmDrive power: 1.5 / 1.8 kWWeight approx: 215 kgWith- Underframe- Cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm capacity 45 degrees: flat: 220 x 200 mm capacity 45 degrees: round: 230 mm capacity 45 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 140 x 100 mm capacity 60 degrees: square: 100 x 100 mm capacity 60 degrees: round: 150 mm vice: 285 mm turning speed range:: 36/72 m/min dimensions of saw-band: 2950x27x0,9 mm total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 460 kg dimensions of the machine ca.: 1150 x 1970 mm Furnishing: - semi-automatic band saw machine - with miter device 45 ° right - 60 ° left - EVO microprocessor control to control all functions - with both. Miter device, adjustable via large turntable - optionally manual or autom. Lowering the saw bow - BI-metal saw band - coolant device - Angle stop - Chip removal brush - Operating instructions in Ge ...

cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: square: 250 x 250 mm capacity 60 degrees: flat: 170 x 170 mm capacity 60 degrees: square: 170 x 170 mm capacity 60 degrees: round: 180 mm turning speed range:: 40 / 80 m/min dimensions of saw-band: 3320 x 27 x 0,9 mm engine output: 1,5 / 1,8 kW weight: 670 kg Furnishing: - Miter band saw / semi-automatic, for cuts left up to 60 ° / right up to 45 ° - autom. Saw bow lowering, infinitely adjustable feed - Limit switch-off at the end of the cut - hydraulic vice clamping - manual function - built-in coolant device - large turntable with bearings - Required instructions - saw band - Chip removal brush - Operating instructions in German Special accessories included: - MEP LubeCut microdosing ...

Metal miter circular saw make KASTO type GKS 400 PMachine -No: 3111101003, built in 1995Saw blade dimensions: 400 mmCutting area 90 ° round: 130 mmCutting area 90 ° flat: 260 x 80 mmCutting area 90 ° square: 120 x 120 mmCutting area 45 ° round: 130 mmCutting area 45 ° flat: 180 x 80 mmCutting area 45 ° square: 110 x 110 mmCutting area 60 ° round: 90 mmCutting area 60 ° flat: 130 x 80 mmCutting area 60 ° square: 90 x 90 mmCutting speed: 11/22 m / min.Drive power: 5 kWWeight: 1080 kgOutside dimensions approx: 1250 x 1205 x 1900 mmWith- CE markused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motor flat bar shears / bar shears make MUBEA type KFS 20Machine -No: 161/23028/420for rectangular cutting of round, square and flat steelMax. Shear cross section: 4000 mmCutting performance flat: 100 x 36 mmor: 300 x 20 mmwith special tool round: 65 mm: square: 60 x 60 mmStroke rate: 40 hpM.Power requirement: 7.5 hpWeight approx: 2450 kgOutside dimensions approx: 1600 x 1200 x 2700 mmWith- Central lubrication- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

dimensions of saw-band: 2950x27x0,9 mm : 36/72 m/min : 285 mm capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 220 mm capacity 90 degrees: flat: 280x220 mm capacity 45 degrees: round: 230/200 mm capacity 45 degrees: square: 200/170 mm capacity 45 degrees: flat: 220x200/200x140 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 80 mm capacity 60 degrees: flat: 140x100 mm output: 1,5 / 1,8 kW Weight: 440 kg dimensions: 1700x1000x1650 mm - with semi-automatic lowering - The CUT CONTROL SYSTEM allows semi-automatic lowering of the Saw bow by the weight of the saw head - The lowering speed is infinitely regulated. Single cuts can do so be carried out with uniform feed - The SHARK 282 CCS has a turntable for double-sided miter. The cut always takes place in the same groove The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 36/72 m/min : 285 mm capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 230 mm capacity 90 degrees: flat: 280x200 mm capacity 45 degrees: round: 190 mm capacity 45 degrees: square: 180 mm capacity 45 degrees: flat: 180x180 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 110 mm capacity 60 degrees: flat: 110x110 mm dimensions of saw-band: 2950 x 27 x 0,9 mm output: 1,5 / 1,8 kW Weight: 435 kg dimensions: 1700x1000x1840 mm Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts - vise opens The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 120 mm saw blade diameter: 370 mm vice: 190 mm capacity 90 degrees: flat: 180 x 95 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: flat: 125 x 95 mm capacity 60 degrees: round: 90,0 mm capacity 60 degrees: flat: 90 x 95 mm dimensions of saw-blade: 370 x 32 x 2,5 mm cutting speed: 15 - 150 m/min engine output: 3,0 kW weight: 640 kg range L-W-H: 900 x 1500 x 1910 mm New price ~ 16.000 euros Furnishing : - semi-automatic vertical metal circular saw - with miter adjustment 60 ° left / 45 ° right - swiveling control panel, front left - The saw head slides on linear double guides - pneumatic vice clamping - pneumatic saw blade feed, stepless - Infinitely variable speed adjustment from the saw blade - 2x replacement saw blade - Machine frame with coolant device - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech ...

cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm capacity 45 degrees: round: 230 mm capacity 45 degrees: flat: 220 x 200 mm capacity 45 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 140 x 100 mm capacity 60 degrees: square: 100 x 100 mm capacity 60 degrees: round: 110 mm vice: 285 mm turning speed range:: 36/72 m/min saw band length: 2.950 x 27 x 0,9 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 440 kg. dimensions of the machine ca.: 1620 x 1360 mtr. Furnishing: - manual band saw machine + with both. Miter device right 45 ° / left 60 ° - adjustable via large turntable - Selector switch for switching between manual and controlled lowering - autom. Limit switch-off - either manual or autom. Lowering the saw bow - Required instructions - saw band - coolant device - Angle stop - Chip removal brush - Op ...

Wire stitching machine Agrafix BX; good condition; cleaned and tested; Stitching thickness 25mm with the clamp folded down, 40mm with the clamp not folded; block or saddle stitching; Clamp width 14mm; suitable for round or flat wire. Wire stitcher Agrafix BX; good condition; cleaned and checked; max.stitching thikness by clinched staple 25mm, 40mm by stabbed from both sides; flat or saddle stitching; crown width 14mm; used for round of flat wire.

cutting range: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 45 degrees: square: 250 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: flat: 170 x 170 mm capacity 60 degrees: square: 180 mm automatic feeds: 9999,9 mm feed: minimum 2 mm cutting diameter: minimum 5 mm band speed: 15 - 100 m/min vice: 340 mm Öffnung dimensions of saw-band: 3650 x 27 x 0,9 mm total power requirement: 2,2 kW weight: 1240 kg range L-W-H: 1800 x 1900 x 1750 mm Furnishing: - Fully automatic electro-hydraulic band saw - with additional semi-automatic function, for cuts from 0 ° to 60 ° left - Windows CE” based MEP 50 control and 7 ”touch screen display - Material feed with stepper motor via recirculating ball screw - 600 mm repeatable single stroke to cut any length - Feed ...

dimensions of saw-band: 3650x27x0,9 mm speed: 15/100 m/min capacity 90 degrees: round: 280 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330x260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: square: 250 mm capacity 45 degrees: flat: 270x200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170x170 mm total power requirement: 2,2 kW vice: 340 mm weight: 1240 kg dimensions: 2020x2040x1740 mm Electro-hydraulic fully automatic band saw with additional, semi-automatic Function, for cuts from 0 ° to 60 ° left. Compact machine with the new Windows CE based MEP-50 controller and 7 touch-screen display for managing all machine parameters. Easy operation and control of all cutting parameters in real time. Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings, Single stroke 6 ...

Specifications: - 2 mot. driven rollers - manual. Delivery of the top roller - Shaft diameter 30 mm - Shaft rotation 6 rpm - Roller diameter 132 mm - Bending performance - Flat steel upright 50 x 10 mm - flat 80 x 15 mm - Square 30 mm - Square tube 50 x 50 mm - Round tube 60 x 1.5 mm - Drive 400 V / 0.6 / 0.8 kW - with: - right / left - run - Standard bending set for flat and angle material - separate control panel - Weight approx. 200 kg - Space requirement approx. W 650 x H 1300 x D 950 mm

Small SHIMA SEIKI knitting unit composed of: 1 SHIMA SEIKI flat bed knitting machine, type SES122FF, GG 12 1 SHIMA SEIKI flat bed knitting machine, type SES122RT, GG 12 1 SHIMA SEIKI flat bed knitting machine, type SES122S, GG 7 1 SHIMA SEIKI design programming computer type DS ONE (E) Model VX2000, 1 SIMET electronic Winder with deknitting device model SED/6,6 winding heads, 6” traverse, works as a normal cone to cone winder and permits to recover the yarn from defective knitting clothes

cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: flat: 170 x 170 mm height of material-table: 600 mm Pitch min/max: 50.000 mm vice: 335 mm Öffnung band speed: 15 - 100 m/min automatic feeds: 600 mm dimensions of saw-band: 3650 x 27 x 0,9 mm total power requirement: 2,2 kW weight: 1.105 kg range L-W-H: 3,3 x 2,83 x 2,23 m Electro-hydraulic fully automatic band saw, with additional: semi-automatic semi-automatic dynamic manual operation Description : - Automatic cycle (cuts from 0 ° to 60 ° left) - Semi-automatic, semi-automatic-dynamic and manual cycle - Cuts from 45 ° right to 60 ° left - Manual or semi-automatic dynamic cycle - to make cuts without programming - Numerically controlled band saw ...

cutting diameter: 230 mm capacity 90 degrees: flat: 320 x 130 mm capacity 90 degrees: square: 230 x 230 mm capacity 45 degrees: flat: 230 x 140 mm capacity 45 degrees: round: 220 mm capacity 45 degrees: square: 190 x 190 mm capacity 60 degrees: flat: 120 x 105 mm capacity 60 degrees: square: 105 x 105 mm capacity 60 degrees: round: 120 mm turning speed range:: 35 - 70 m/min dimensions of saw-band: 2720 x 27 x 0,9 mm height of material-table: 950 mm total power requirement: 1,0 - 1,5 kW weight of the machine ca.: 410 kg dimensions of the machine ca.: 800 x 1550 x 1450 mm New price ~ 6.500 euros Furnishing: - semi-automatic miter band saw, for cuts -45 / +60 degrees continuously - Infinitely variable saw feed via precision throttle - Infinitely adjustable cutting speed - Cooling device - Horizontal vise electrically-mechanically acting - Saw band - rotating - front control panel - User ma ...

saw blade diameter: 350 x 32 mm cutting diameter: 115 mm stroke: -- mm capacity 90 degrees: square: 95 mm capacity 90 degrees: flat: 180 x 95 mm capacity 45 degrees: round: li. 110 / re. 110 mm capacity 45 degrees: square: li. 95 / re. 95 mm capacity 45 degrees: flat: li. 125x95 / re . 125x95 mm capacity 60 degrees: round: 90 mm capacity 60 degrees: square: 90 mm capacity 60 degrees: flat: 90 x 90 mm total power requirement: 1,8 / 2,5 kW weight of the machine ca.: 375 t dimensions of the machine ca.: 700 x 900 x 1800 m -The powerful, 2-stage gear was specially designed for cuts in solid material designed -The user has a total of 4 blade speeds for optimal adjustment the material available -The large bearing rotary table with internal table clamping and Precision stops at 0/45/60° ensure quick adjustability miter cuts -The vice with quick clamping (optional is a pneumatic one Vise = MA,  ...

Machine: Gallus R250 Internal Machines No.: 567 Internal C3 No.: Variant 5 Printing Process: Letterpress Printing Units: 5c+Varnish Own Coating Unit: YES Printing Ink: UV Printing Inks Drying: UV Drying Painting-partial: YES / Flexo-Cliché Painting-full-f.: YES / Flexo-Cliché Varnishes: Gloss Varnish, Matt Varnish, TTF Varnish, Luminescent Varnish Lamination: NO Paper material width: min. 130mm / max. 270mm Print width: max.: 255mm Printing capacity: max. rolls Ø - From: 700mm / max. rolls Ø - On: 700mm Punching width: max. 255mm Pressure feed: min. 304.8mm (96T) Pressure feed: max. 596.9mm (188T) Format punching: Flat & rotary WGR 220 Punching units: 1x flat / 1x rotary Flat Stamping: YES Punching Plate: YES Punching Cylinder: YES Airshock Cylinder: YES Upper punching: YES Bottom punching: YES with pass. Umfg. to the Upper Punches Sheet Cutting (Cross) / Sheet C ...

cutting diameter: 510 mm saw band length: 9800 mm cutting width: 1020 mm dimensions of saw-band: 9800 x 67 x 1,6 mm work height max.: 750 (630) mm capacity 90 degrees: round: 510 mm capacity 90 degrees: flat: 1020 x 510 mm capacity 60 degrees: round: 500 (400) mm capacity 60 degrees: flat: 500 (400) x 510 mm capacity 45 degrees: round: 510 mm capacity 45 degrees: flat: 750 (670) x 510 mm cutting length min.: ca. 30 mm cutting speed: 15 - 150 AC m/min down speed: 0 - 300 stufenlos mm/min cutting pressure: stufenlos hydraulisch Weight of Material maxium: 500 Kg/m coolant capacity: ca. 150 l oil volume: Hydraulik 12 l total power requirement: 15,2 kW weight of the machine ca.: 6,7 t dimensions of the machine ca.: 3,4 x 5,8 x 2,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mm saw band length: 2950 mm cutting width: 280 mm dimensions of saw-band: 2950 x 27 x 0,9 mm capacity 90 degrees: flat: 280 x 200 mm capacity 90 degrees: square: 230 mm capacity 45 degrees: round: 190 mm capacity 45 degrees: flat: 180 x 180 mm capacity 45 degrees: square: 180 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: flat: 110 x 110 mm capacity 60 degrees: square: 110 mm total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 0,4 t Powerful miter band saw for cuts from 0 ° to 60 ° left -CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Description: -Manual cutting cycle -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring -Stable, torsion-resistant and low-vibration saw frame made  ...

cutting diameter: 250 mm saw band length: 2950 mm cutting width: 280 mm turning speed range:: 36 / 72 m/min dimensions of saw-band: 2950 x 27 x 0,9 mm capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 220 mm capacity 90 degrees: flat: 280 x 220 mm capacity 45 degrees: round: 230 mm capacity 45 degrees: square: 200 mm capacity 45 degrees: flat: 220 x 200 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 80 mm capacity 60 degrees: flat: 140 x 80 mm work height max.: 870 mm total power requirement: 2 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,8 x 0,9 x 1,8 m Powerful miter band saw for cuts from 45 ° right to 60 ° Left Electro-hydraulic semi-automatic machine with microprocessor control and 4 Modes of operation Description: - Indexing at 0 ° / 45 ° / 60 ° and internal table clamp for Intermediate angle - Control panel on vertical ...

cutting diameter: 180 mm saw band length: 2130 mm cutting width: 200 mm dimensions of saw-band: 2130 x 20 x 0,9 mm : 200 mm band speed: 40/80 m/min capacity 90 degrees: round: 180 mm capacity 90 degrees: square: 180 mm capacity 90 degrees: flat: 200 x 150 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: flat: 125 x 110 mm capacity 45 degrees: square: 110 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: flat: 70 x 70 mm capacity 60 degrees: square: 70 mm total power requirement: 0,7 / 0,81 kW weight of the machine ca.: 0,2 t dimensions of the machine ca.: 1,4 x 0,9 x 1,6 m Compact, powerful workshop miter band saw machine for cuts from 0 ° to 60 ° left Automatic cut (HB) and manual cut Description: -Manual cutting cycle and automatic cutting -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via co ...

I - beam section - flat steel: 140 x 140 x 13 mm I-beam section - upend: 120 x 120 x 13 mm L-beam: 130 x 130 x 12 mm round bar steel: 85 mm bending capacity - flat iron: 125 25 mm flat steel: 65 x 65 mm including various rollers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 225 mm saw band length: 2450 mm table height: mm cutting width: 240 mm dimensions of saw-band: 2450 x 27 x 0,9 mm area output: 240 mm band speed: 46/92 m/min capacity 90 degrees: round: 225 mm capacity 90 degrees: square: 200 mm capacity 90 degrees: flat: 240 x 160 mm capacity 45 degrees: round: 160 mm capacity 45 degrees: flat: 155 x 115 mm capacity 45 degrees: square: 140 mm capacity 60 degrees: round: 90 mm capacity 60 degrees: flat: 90 x 90 mm capacity 60 degrees: square: 90 mm total power requirement: 1,4 kW weight of the machine ca.: 0,24 t dimensions of the machine ca.: m Compact, powerful workshop miter band saw machine for cuts from 0 ° to 60 ° left AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring Description: -Manual cutting cycle and automatic cutting -AUTOMATIC  ...

cutting diameter: 225 mm saw band length: 2450 mm cutting width: 240 mm dimensions of saw-band: 2450 x 27 x ,09 mm band speed: 46 / 92 m/min capacity 90 degrees: round: 225 mm capacity 90 degrees: square: 200 mm capacity 90 degrees: flat: 240 x 160 mm capacity 45 degrees: round: li. 160 / re. 145 mm capacity 45 degrees: flat: li. 140 / re.125 mm capacity 45 degrees: square: li. 155 x 115 / re. 150 x mm capacity 60 degrees: round: 90 mm capacity 60 degrees: square: 90 mm capacity 60 degrees: flat: 90 x 90 mm motor: 0,7 / 0,81 kW weight of the machine ca.: 0,27 t dimensions of the machine ca.: 1,2 x 1,1 x 1,5 m Compact, powerful workshop double miter band saw for cuts of 45 ° right to 60 ° left AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and setting of the Cutting pressure via compensating spring Description: -Manual cutting cycle and automatic cutti ...

dimensions of saw-band: 3650x27x0,9 mm speed: 15-100 m/min vice: 335 mm capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330x260 mm capacity 45 degrees: round: 260/200 mm capacity 45 degrees: square: 250/180 mm capacity 45 degrees: flat: 270x200/200x160 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170x170 mm total power requirement: 2,2 kW weight: 1.105 kg dimensions: 2700x2300x1800 mm Fully automatic electro-hydraulic band saw with multi-micro processors and additionally semi-automatic, semi-automatic-dynamic and manual Function. - Automatic cycle (cuts from 0 ° to 60 ° link). CNC machine with two controlled axes that allow for the same material thickness 1000 various editing programs, each with a different cutting length and quantity, too program. - Semi-automatic, semi-automatic- ...

Cutting range round 0°: 150 mm Cutting area square 0°: 150 x 150 mm Cutting area flat 0°: 150 x 165 mm Cutting range round 45°: 115 mm Cutting area flat 45°: 115 x 130 mm Cutting range round 60°: 60 mm Cutting area flat 60°: 70 x 70 mm Working height: 700 mm Band saw blade dimensions: 1735 x 13 x 0.65 mm Cutting speeds: 40 - 80 m/min Motor output power S1 100%: 0.75 kW Voltage: 400 V Machine dimensions: 1200 x 750 x 1250 mm Weight approx.: 85 kg Characteristics: • For cutting profiles, tubes, solid materials made of VA, iron and non-ferrous materials • For miter cuts, the saw bracket can be swivelled by up to 60° • Infinitely variable lowering via hydraulic lowering cylinder • Torsion-free, strongly dimensioned saw arm made of grey cast iron • 2 cutting speeds for optimal cutting results • Robust construction, therefore smooth and vibration-fre ...

Cutting range round 0°: 150 mm Cutting area square 0°: 150 x 150 mm Cutting area flat 0°: 150 x 165 mm Cutting range round 45°: 115 mm Cutting area flat 45°: 115 x 130 mm Cutting range round 60°: 60 mm Cutting area flat 60°: 70 x 70 mm Working height approx.: 700 mm Band saw blade dimensions: 1735 x 13 x 0.65 mm Cutting speeds : 40 / 80 m/min Motor output power S1 100%: 0.75 kW Voltage : 400 V Machine dimensions : 1200 x 750 x 1250 mm Weight approx.: 85 kg Characteristics: • For cutting profiles, tubes, solid materials made of VA, iron and non-ferrous materials • For miter cuts, the saw bracket can be swivelled by up to 60° • Infinitely variable lowering via hydraulic lowering cylinder • Torsion-free, strongly dimensioned saw arm made of grey cast iron • 2 cutting speeds for optimal cutting results • Robust construction, therefore smooth and vi ...

CNC machining center including laser edge type BIMA / Gx50 / E / 160 / 630 Specifications: IMA gantry machine in real GANTRY design Processing area: • Length in X direction with all aggregates (mm): 6300 • Width in Y-direction with all aggregates (mm): 1600 • Height in Z-direction with all aggregates (mm): 225 maximum clamping height including clamping device - the maximum workpiece thickness depends on equipment/application • Length in X direction with vertically positioned main spindle and tool diameter 20 mm: 6300 mm • Width in Y-direction with vertically positioned main spindle and tool diameter 20 mm: 2000 mm • Width in Y-direction with edging (mm): 1600 • Length in X-direction Single user processing without gluing (mm): 2 x 3050 • Length in X-direction free space center (mm): 200 • Length in X-direction Single user processing with gluing (mm): 2 x 2 ...

cutting diameter: 350 mm saw band length: 4160 x 34 x 1,1 mm cutting width: 350 mm cutting capacity - flat: 400 x350 / 90° mm cutting capacity - flat: 290 x 300 / 45° mm cutting capacity - flat: 400 x 350 / 30° mm cutting capacity - round: 350 / 90° mm cutting capacity - round: 320 / 30° mm cutting capacity - round: 320 / 45° mm feeds - fine adjustment: 20-100 mm hydraulic motor: 0,37 kW coolant pump AC: 0,12 kW drive motor: 2,2 kW total power requirement: 2,7 kW weight of the machine ca.: 1,05 t dimensions of the machine ca.: 2100 x 1300 x 850 m Accessories : automatic sawing functions, hydraulic clamping, material feed via driven rollers, pneum. adjustable lowering speed, sawing programs adjustable via touch screen, EU quality and CE standards, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm capacity 45 degrees: flat: 220 x 200 mm capacity 45 degrees: round: 230 mm capacity 45 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 140 x 100 mm capacity 60 degrees: square: 100 x 100 mm capacity 60 degrees: round: 150 mm vice: 285 mm turning speed range:: 36/72 m/min dimensions of saw-band: 2950x27x0,9 mm total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 460 kg Current new price 12.500 euros Furnishing: - semi-automatic band saw machine - with miter device 45° right - 60° left - Microprocessor control EVO to control all functions - with both. Miter device, adjustable via large turntable - either manual or automatic lowering of the saw arch - BI-metal saw band - Cooling device - Chip removal brush - Operating instructions in German Functionality of semi ...

DURMA IW 55/110 BTD ironworker machine manufactured in 2014 in Turkey helps to significantly increase production efficiency while keeping operating costs low. The highly versatile and multifunctional machine has a rigid and stable frame made of steel plates with 5 work stations for precise hole and corner punching, as well as cutting flat bars, angle bars and solid bars. The DURMA hydraulic ironworker machine guarantee excellent cutting quality throughout their service life, thanks to the use of a hydraulic cylinder with a centrally located actuator. The total weight of the machine is 1660 kg. Technical specifications of the DURMA IW 55/110 BTD ironworker machine General data - punching force: 55 t - cutting force: 110 t - number of workstations: 5 - number of hydraulic cylinders: 2 - cylinder stroke: 50-60 mm - number of cylinder strokes (20 mm stroke): 37/min - reach: 510 mm ...

Used, Year of Construction 2016 Offer Barth VacuuCar®+ with extra accessories from a part-time carpentry workshop for sale in top condition. The additional automatic shut-off system keeps the vacuum above a separate accumulator, so that work can be carried out without the noise of the pump in the case of dense plates. Vacuum pump for continuous operation 3m3 / h / 120 Watt with dust filters Foot valve for loosening the clamped workpieces Base frame with 90° rotation axis for vacuum cups 2 vacuum flat cups 900 mm / round, 250 x 80 mm with quick-change system Pull-outs on both sides + 450 mm 5 swivel support strips made of squared timber (wood/carpet) Integrated 3-way power strip for additional devices Hydraulic height adjustment with reversible hand crank 6-way adjustable bench hooks as a support Four castors, 2x brakeable and 2x with directional lock L x Br x H: 1350  ...

BRANDT KDF 660 Profiline single-sided edge banding with joint milling, pre-milling, fine milling, 2-fold corner copying, radius drawing blade, flat-drawing blade and babble units Type: KDF 660 Profiline Specifications: BRANDT KDF 660 Profiline with joints and corner rounds Preheating of the tool stucco IR preheating Edge thickness 0,4 - 15mm Banding height max. 66 mm, with program high adjustment Caps from the roll at 3mm thickness max 45mm height or 0.8 65mm Plate thickness max. 8-60 mm for corner copying max 40mm Control PC20+ link control (loss of contact), with modem for remote service/maintenance 1. Joint unit program Adjustment of the infeed line 2. Bandkapmesser 3a. Radiant heater High-strength bonding by workpiece preheating 3b. Spray anti-adhesive 3c. Quickmelt Glue Mel Mel Application Unit with Quick Change 3d. Leimangabe by means of glue rol ...

cutting diameter: 225 mm saw band length: 2480 mm cutting width: 250 mm cutting speed: 45 / 90 m/min dimensions of saw-band: 2480 x 27 x 0,9 mm capacity 45 degrees: flat: 135 x 185 - 145 x 150 mm capacity 45 degrees: round: 150 mm capacity 45 degrees: square: 145 mm capacity 60 degrees: flat: 63 x 107 - 69 x 90 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: square: 70 mm capacity 90 degrees: flat: 240 x 160 - 250 x 110 mm capacity 90 degrees: round: 225 mm capacity 90 degrees: square: 185 mm total power requirement: 0,75 / 1,1 kW weight of the machine ca.: 200 kg dimensions of the machine ca.: 1385 x 580 x 890 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-blade: 350 x Ø 40 x 3 mm cutting range: 120 mm capacity 90 degrees: square: 100 x 100 mm capacity 90 degrees: flat: 170 x 100 mm capacity 45 degrees: round: 120 mm capacity 45 degrees: square: 95 x 95 mm capacity 45 degrees: flat: 120 x 100 mm capacity 60 degrees: round: RE 100 mm capacity 60 degrees: square: RE 85 x 85 mm capacity 60 degrees: flat: RE 85 x 100 mm work height max.: 900 mm saw blade turning speeds: 17 / 34 U/min compressed air: 6,0 - 8,0 bar total power requirement: 1,4 / 1,9 kW weight: 340 kg range L-W-H: 1010 x 765 x 2175 mm Furnishing : - semi-automatic vertical cold circular saw - Pneumatic quick clamping device - Infinitely adjustable saw blade feed - Convenient miter adjustment - Convenient stroke adjustment of the saw unit via clamping levers - Generously dimensioned gears - with Eisele rotation compensation for a long saw blade service life - Co ...

cutting diameter: 270 mm saw band length: 2920 x 27 x 0,9 mm table height: 940 mm band speed: 35 + 70 m/min capacity 90 degrees: flat: 285 x 200 mm capacity 90 degrees: square: 250 x 250 mm capacity 45 degrees: round: 210 mm capacity 45 degrees: flat: 200 x 200 mm capacity 45 degrees: square: 200 x 200 mm capacity 60 degrees: round: 150 mm capacity 60 degrees: flat: 140 x 180 mm capacity 60 degrees: square: 140 x 140 mm total power requirement: 2,2 / 2,9 kW weight of the machine ca.: 310 kg dimensions of the machine ca.: 1700 x 800 x 2050 mm Furnishing: - semi-automatic band saw, with miter adjustment - Miter adjustment via large turntable - 2x saw band speeds - Stepless lowering of the saw frame - hydraulic material clamping - Machine base - 3x feed roller conveyor included - User manual (PDF format) The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

cutting diameter: 300 mm saw band length: 3650 mm cutting width: 330 mm dimensions of saw-band: 3650 x 27 x 0,9 mm band speed: 15 - 100 m/min capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330 x 260 mm capacity 45 degrees: round: li. 260 mm capacity 45 degrees: square: li. 250 mm capacity 45 degrees: flat: li. 270 x 200 mm capacity 60 degrees: round: li. 180 mm capacity 60 degrees: square: li. 170 mm capacity 60 degrees: flat: 330 x 260 mm motor: 2,2 kW weight of the machine ca.: 1,24 t dimensions of the machine ca.: 1,9 x 1,8 m Control: Electro-hydraulic automatic miter band saw for cuts from 0 ° to 60 ° left -new, innovative (Windows CE based) touch screen control -Cutting area around max. 280 mm (solid material) - Required space only 3.42 square meters New version: now with anti-vibration rollers and an even more powerful gear size ...

cutting diameter: 330 mm saw band length: 4640 mm cutting width: 510 mm capacity 90 degrees: flat: 510 x 320 mm capacity 90 degrees: round: 330 mm capacity 90 degrees: square: 320 mm capacity 45 degrees: flat: li. 350 x 320 / re. 380 x mm capacity 45 degrees: round: li. 320 / re. 320 mm capacity 45 degrees: square: li. 320 / re. 320 mm capacity 60 degrees: flat: li. 230 x 310 / re. 250 x mm capacity 60 degrees: round: li. 200 / re. 200 mm capacity 60 degrees: square: li. 200 / re. 200 mm weight of the machine ca.: 1,19 t total power requirement: 4,0 kW Powerful miter band saw for cuts from 60 ° right to 60 ° Left With saw band 34 x 1.1 mm (5.5 kW frequency converter, 4 kW belt drive motor) Electro-hydraulic semi-automatic machine with microprocessor control Functionality: -Semi-automatic operation (start / stop position of the saw bow is controlled via the Keyboard programmed. Vice clo ...

cutting diameter: 300 mm saw band length: 3650 mm cutting width: 330 mm dimensions of saw-band: 3650 x 27 x 0,9 mm band speed: 15 - 100 m/min capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330 x 260 mm capacity 45 degrees: round: li. 260 / re. 200 mm capacity 45 degrees: square: li. 250 / re. 180 mm capacity 45 degrees: flat: li. 270x200 re. 200x160 mm capacity 60 degrees: round: li. 180 mm capacity 60 degrees: square: li. 170 mm capacity 60 degrees: flat: li. 170 x 170 mm motor: 2,2 kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: 1,9 x 1,8 m Control: Windows CE basiert Powerful miter band saw for cuts from 45 ° right to 60 ° left Electro-hydraulic CNC machine with Windows CE based touch screen control -Automatic cycle (cuts from 0 ° to 60 ° left) -Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from  ...

cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 45 degrees: round: 250 mm capacity 45 degrees: square: 250 x 250 mm capacity 60 degrees: flat: 170 x 170 mm capacity 60 degrees: square: 170 x 170 mm capacity 60 degrees: round: 180 mm turning speed range:: 40 / 80 m/min saw band length: 3650 x 27 x 0,9 mm weight of the machine ca.: 640 kg New price ~ 11.500 euros Furnishing: - automatic lowering of the saw arch, with steplessly adjustable feed - with limit stop at the end of the cut - manual / semi-semi-automatic function selectable - 2x saw band speeds - large bearing turntable, for miter cuts from 45° right - 60° left - Vice manually adjustable on both sides - manual material clamping - 1x saw band - rotating chip removal brush - Control panel - front right - hydraulic pressure  ...

saw blade diameter: 350 mm cutting diameter: 100 mm dimensions of saw-blade: 350 x 2,5 x 32 mm height of material-table: 900 mm cutting speed: 38/76 m/min capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 170 x 90 mm capacity 90 degrees: square: 90 x 90 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: flat: 125 x 90 mm capacity 45 degrees: square: 90 x 90 mm capacity 60 degrees: round: 90,0 mm capacity 60 degrees: flat: 90 x 90 mm capacity 60 degrees: square: 90 x 90 mm clamping range: max. 170 mm total power requirement: 1,8 / 2,4 kW weight of the machine ca.: 500 kg. dimensions of the machine ca.: 1200 x 600 x 2200 mm The KASTOradial U 10 is a semi-automatic vertical circular saw with two Cutting speeds and steplessly adjustable saw feed for the universal use in workshop and production. The machines stands out through precise dovetail guides, robust gears and larg ...