1000 offers

maximum number of results exceeded > 1000
please refine your search

Category: 105
item-No.: 126926766
The dimensions of the cut section the size of the cut section under 90° (flat.) 350x320 mm the size of the cut cross-section at 90° (round) 320 mm the size of the cut cross-section at 90° (square) 320 mm stop length 500 mm cutting speed 20-100 stufenlos / infinitely variable m/min Work area length of roller table 1000 mm Power motor power main drive 1.5 kW the line voltage is 400 V engine power the hydraulics. pump 0.55 kW feed motor power 0.25 kW coolant pump motor power 0.12 kW Dimensions and ...
Category: 702
item-No.: 126938385
dimension of wafer sheets 360 x 450 mm\r\n1. cut 32 mm \r\n2. cut 30 mm\r\nstacking height approx. 5 - 80 mm\r\n
Category: 106
item-No.: 126917168
Hand lever shears / snips / SchalgschereHöhe: 100 cm, overall height: 250cmBreite: 45cmTiefe: 80cmGeeignet for flat steel, round bars, angle iron and rectangular material. Good condition fully functional can be visited on site and tried out. Shipping in the Ausland.Besichtigung: basically I would like to point out, that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointm ...
Category: 702
item-No.: 126938441
variabel speed, timer, \r\nbowl lifting and lowering by a lever \r\naccessories: 1 bowl 40 l stainless steel \r\n 1 whip stainless steel, \r\n 1 doughhook stainless steel, \r\n 1 flatbeater stainless steel
Category: 105
item-No.: 126917141
Saw blade diameter: 400/ 425/ 450mm, cutting range round/ square/ flat: 130-150mm/ 120-140mm/ 225-400x30-95mm, rotational speed: 6-48m/min, feed rate: 7.5-68m/min, length: 1350mm, width: 1200mm, height: 1850mm, weight: 1.1t, documentation available.
Category: 702
item-No.: 126938443
planetary-mixer, fabr. REGO, type PM140 E, 140 l, \r\nvariabel speed, microprocessor controlled\r\nbowl lifting and lowering electric\r\naccessories: 1 bowl stainless steel, 140 l --new--\r\n 1 whip stainless steel --new--\r\n 1 flat beater\r\n 1 doughhook
Category: 105
item-No.: 126917008
Hydraulic cold saw machine. Saw blade diameter 400 mm Section diameter 130/140 mm Cutting capacity 90 ° square 120 x 120 mm flat 260 x 80 mm at 90 ° flat 180 x 80 mm at 45 ° at 45 ° round 130 mm at 45 ° square 110 x 110 mm Table rotation range 150° min. residual length 20 mm Working height 1050 mm Drive 5 kW total Machine weight approx. 1,6 t Accessories: length scale, long rollers, approx. 14 blades, Hengstler counters, hydraulic horizontal vise, coolant system, variable cutting speed.
Category: 702
item-No.: 126938469
3 speeds, bowl max. 80 l\r\nvariabel speed, saftey device,\r\nbowl lifting and lowering by electric \r\naccessories: 1 bowl 80 l stainless steel\r\n 1 trolley for the bowl\r\n 1 whip \r\n 1 doughhook\r\n 1 flatbeater\r\n 1 timer\r\n 1 safety device
Category: 105
item-No.: 126901908
Technical data: -Band saw blade dimensions 2710 x 27 x 0,9 mm -Speeds 28 + 56 m / min -Hydro - pneumatic - lift + lowering the saw frame -Cutting pressure regulation -Machine table left swiveling for miter cuts -Cutting area -at 90 ° approximately 230 mm flat 300 x 150 mm -at 30 ° li round 90 mm -at 45 ° li around 200 mm flat 200 x 200 mm -maximum opening width of the clamp stick 320 mm -Auto. Material supply machine 0-500 mm -The remaining length of piece of one. / autom.  ...
Category: 702
item-No.: 126938225
variabel speed, timer, \r\nbowl lifting and lowering by a lever \r\naccessories: 1 bowl 40 l stainless steel \r\n 1 whip stainless steel, \r\n 1 doughhook stainless steel, \r\n 1 flatbeater stainless steel
Category: 107
item-No.: 126901886
Technical data: -Flat steel scissor cuts up to 375 x 10 mm 220 x 20 mm -Shear - cut L steel at 90 to 130 x 13 mm Rod steel scissors - cut steel up to 45 mm Square steel up to 45 mm -Notching device - Vierkantausklinkeinr. 100 x 42 x 10 mm -Hole punch - punching power 600 KN -with stop table - RADIUS 300 mm -punches in steel up to 28 mm Ã? 15 mm or 34 mm Ã? 12 mm -Drive 400 V / 4 kW -Space requirement approx. B 600 x H 1550 X 1500 mm -Weight app ...
Category: 702
item-No.: 126938073
variable speed, bowl lifting\r\nand lowering by a lever \r\naccessories: 1 bowl 60 l stainless steel \r\n 1 whip\r\n 1 bowl 30 l stainless steel \r\n 1 whip\r\naccessories: 1 bowl 60 l stainless steel \r\n 1 whip, 1 doughhook, 1 flatbeater \r\n \r\n 1 bowl 30 l stainless steel \r\n 1 whip, 1 doughhook, 1 flatbeater \r\n
Category: 105
item-No.: 126901882
Technical data: -Saw blade diameter up to 275 mm -Saw blade feed by hand lever -biggest opening of the Vice 145 mm -Section blade diameter 275 mm -at 90 ° round 90 mm Flat up to 120 x 80 mm or 140 x 110 mm -at 45 ° round 80 mm flat 80 x 85 mm -adjustable miter - Li up to 45 ° -Re up to 30 ° -Blade speed 20 + 40 RPM -Drive: 400 V / 0.5 / 0.9 kW -Coolant system -Space requirement approx. B 600 x H 900 X 600 mm -Weight approx. 200 kg
Category: 2500
item-No.: 126934725
2016
22.000 EU?
Land-pl PL
The machine is designed for eco-friendly removal of paints and contaminants using a spray of baking soda in various granulations. Possibility to use other cleaners - glass, corundum, sand, etc. From the smallest grain granulation (baking soda) to the thickest 2-3 mm. Smooth regulation of cleaning power, with surface smooth and rough, without damage. Waste throws dry and in water-free modes, hydrodynamically and in a water mix. Round nozzles from size # 3 to # 4 and flat nozzles are possible. Construction of a carbo ...
Category: 107
item-No.: 126901842
Technical data: -Cutting capacity 90 ° round 320 mm flat 320 x 390 mm -Hydr. -Adjustable miter right 20 ° + left 45 ° -Cutting capacity 45 ° round 220 mm flat 320 x 220 mm -Material supply machine -Material height approx. 1050 mm -Band saw blade dimensions 3400 x 27 x 0,9 mm -Cutting speed m/min - Hydr. -Cutting pressure infinitely variable 0-10 m / min -You. -Blade tension -Hydr. -Material Vice -Mikrosprüh - coolant system -Total power 400 V / 2.7 kW -Space requirement approx. B 32 ...
Category: 1900
item-No.: 126930185
-
used machinery auction RESALE 50 €
Land-ch CH
Weight approx.: 1500 kg Dimensions (l x w x h) approx.: 4000 x 2900 x 1600 mm Description: Untreated, loose material, including 2 transport trolleys
Category: 107
item-No.: 126901834
Technical data: -Manual band saw machine -Band saw blade size 2140 x 19 x 0.9 mm -2 speeds N 30 / 60 m / min -maximum clamping way 175 mm - MITRE adjustable li + re up to 30 ° - cut range - 90 ° round 175 mm flat 190 x 135 mm flat 200 x 75 mm -45 ° li + re around 110 mm flat 150 x 110 mm -Drive 220 V / 2000 Watt -Coolant system - weight approx. 150 kg - space requirement approx. B 600 x H 1550 X 1150 mm
Category: 207
item-No.: 126930001
2008
used machinery auction RESALE 18.000 €
Land-de DE
serial number: 0-261-07-2671 Weight approx.: 1500 kg control: easy Control EC 10+ Dimensions (l x w x h) approx.: 4800x1200x1600 mm feed: max. 11 m/min setting measure approx (l x w x h): 4800x1200x1600 mm packing measure approx (l x w x h): 4800x1200x1600 mm edge thickness: 0,4 - 8 mm workpiece thickness: 8 - 60 mm joint trimming unit: FG 3520 2x 2,2 KW 200Hz snipping unit: HL 6130 2 x 0,18KW 200Hz fine trimming unit: BF 6240 2x 0,55KW 200Hz profile trimming unit: FF 6210 1x0,35KW 200Hz flat scraping unit: ZF 6600 ...
Category: 104
item-No.: 126901720
used ABA surface grinding machine type FFU750/50 The machine is equipped with a grinding magnet 400 x 750 mm. Travel approx. 400 x 700 x 500 mm The machine is was no longer connected, since you been decommissioned because of production changes. Loop function is given, the automatic depth delivery is defective can with an appropriate spare part again be made, manual delivery is possible. Pictures are in the system Copy of the operating manual is at the machine Visit required. VAT statable.
Category: 2417
item-No.: 126920255
2007
29.900 €
Land-de DE
; Mileage [km]: 136000; Power [PS]: 256; Gross weight [kg]: 15000; Transmission: Mechanisch; Front tyre size: 285/70 R 19,5; Rear tyre size: 285/70 R 19,5; Accessories: ABS, Differentialsperre, Klimaanlage; Colour: Weiß; Wheelbase: 4150; Cargo space dimensions [LxBxH]: 4400x2480x500; Max payload [kg]: 6930; Emission class: Euro 4; Cabin: Schlafkabine
You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
more types: