flat used for sale

vibratory feeder diameter range 6-12 mm shaft length under head 170 mm max. thread length 102 mm output pieces/min 125

Flat gate valve, knife gate valve with flange connection, butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -without drive -Connection: DN80 -Width: 50 mm -Nominal pressure: 10 bar -Inner part: stainless steel -Number: 1x valves available -Price: per piece -Weight: 9.5 kg/piece

Used meat flattener Demonstration system - Conveyor width: 600 mm - Quick belt change for hygienic cleaning ---------------------------------------------------- Used Meat flattener Presentation machine - Conveyor width: 600 mm - Quick belt change for hygienic cleaning

Spiral wound gasket, labyrinth housing gasket, flange gasket, high-pressure gasket -Manufacturer: Frenzelit, Novatec Premium flat gasket -Outer diameter: 126 mm -Inner diameter: 77 mm -Thickness: 2 mm -Quantity: 51x seals available -Price: per piece -Minimum order quantity: 15 pieces -Weight: 0.03 kg/pc.

Profile bending machine, bending machine, flat bar bender, horizontal bending/straightening press -Flat bar bender: hydraulic profile bending machine -Base: on casters, table folds on both sides -Operating mode: Manual and automatic operation -Accessories: see photos -Overall dimensions: 2155/1320/H1070 mm -Transport dimensions: 1320/840/H1245 mm -Weight: 404 kg

Flat-jaw thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine, thread rolling machine -Manufacturer: EWM, flat jaw thread rolling machine knurling machine -Type: unfortunately without type designation -Drive: 4.6/5.8 kW 1435/2890 rpm -Belt drive: 3-way adjustable -Knurling plate: RAA 1.0 -Central lubrication: -Dimensions: 1680/920/H1440 mm -Weight: 1308 kg

Cutting blades, replacement blades for guillotine shears, replacement cutting edges, cutting blades, shear blades, flat steel blades for profile steel shears, lever shears -Cutting blade: Replacement blade, flat steel blade for profile steel shears, lever shears -Cutting length: 229 mm -Hole spacing: 120 mm / M16 see photos -Dimensions: 229/15/H63 mm - Weight: 1.6 kg

Key data: 600 mm, 250 mm

Surface Grinding Machine Jung JF520 +Supromatic Built in 1979 The machine was completely overhauled in 1999 Grinding length: 600 mm Grinding width: 250 mm Operating hours: 15000 h Good condition

flat roof steel construction; free span; trusses c.o.h. 4000mm; consisting of 4 sets of lattice girders with tubes as uprights; equipped with wind bracing and cross braces; steel construction is neatly ready for transport and must be picked up with 1 trailer; lots are loaded with a forklift for free Auction-ID: A1-41454-26

Flat roof construction; steel construction with completely free span; trusses c.o.h. 5000mm; consists of 4 sets of intermediate trusses lattice girders with tubes as uprights; 2 sets of end façade trusses in IPE160 with wind posts; steel drawing; 3D impression; equipped with pressure tubes; wind bracing; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41454-25

flat roof steel construction; free span; trusses c.o.h. 4000mm; consisting of 6 sets of lattice girders with tubes as uprights; equipped with wind bracing and cross braces; steel construction is neatly ready for transport and must be picked up with 1 trailer; lots are loaded with a forklift for free Auction-ID: A1-41454-29

Heavy flat roof steel construction; free span; trusses c.o.h. 5000mm; consisting of 4 sets of intermediate trusses heavy lattice girders with HEA140 as uprights; 2 sets of end trusses with wind posts in IPE140 with wind bracing and cross braces; steel construction is neatly ready for transport and must be picked up with 1 trailer; lots are loaded with a forklift for free Auction-ID: A1-41454-24

flat roof steel construction; free span; trusses c.o.h. 4000mm; consisting of 4 sets of lattice girders with tubes as uprights; equipped with wind bracing and cross braces; steel construction is neatly ready for transport and must be picked up with 1 trailer; lots are loaded with a forklift for free Auction-ID: A1-41454-28

flat roof steel construction; free span; trusses c.o.h. 4000mm; consisting of 5 sets of lattice girders with tubes as uprights; equipped with wind bracing and cross braces; steel construction is neatly ready for transport and must be picked up with 1 trailer; lots are loaded with a forklift for free Auction-ID: A1-41454-27

Flat screen TV LG NanoCell AI 50 inches, 50NANO82T6B, org. packaged, no condition information known

Multi-transport trailer 750kg EC 2 axles 1050kg Smooth concrete loading floor made of Finnish birch 12 mm 13-pole European lighting Auction-ID: A3-43366-30844

Machine: SCM SIGMA IMPACT 105 C Flat Saw Year: 2003 Useful cutting length: 4500 mm Useful cutting depth: 4500 mm Blade overhang: 105 mm Press: grooved Trolley speed: 30 m/min Pusher: 9 pneumatic clamps Tables: 3x 1500x600 mm in bakelite Ø main plank: 380 mm Main blade motor: 10 hp Ø scoring blade: 160 mm Incisor motor: 2 hp Weight: 4400 kg Consumption: 55 A Suction: 2x Ø120 mm + 1x Ø150 mm Power supply: CE, 380 V Auction-ID: A1-45443-9

Helpo (Paul Helsen) First registration: 10/01/2006 Useful length: 400 cm Useful width: 200 cm Delivered WITH glass trestle Nose wheel 13-pin plug Fully checked Technically sound New rear axle since 20/03/2026 Tyres in order Auction-ID: A3-43507-17004

Machine: Panel saw Panel dimensions: 3800 x 3800 mm Blade overhang: 55 mm Main plank: 72 mm protrusion Number of Clamps: 7 Max. feed: 80 m/min Main Motor: 7.5 kW Scorer: motorized adjustment Stop: right side Compliance: sensitive parts yes Auction-ID: A1-45443-27

Machine: HOMAG Flat Saw CHF 325 38/35 Year: 2004 Max. cross-section: 3800x3800 mm Max. height: 60 mm Blade projection: 72 mm Ø main plank: 350x75 mm Ø scorer: 200x45 mm Engine power: 9.2 kW (12 hp) Scoring power: 1.1 kW (2.2 hp) Speeds: Carriage feed 0-60 m/min, return 60 m/min, programmed pusher 25 m/min Tables: 3 air cushion tables 1900x600 mm Gross Weight: 4200 kg Power supply: 380 V Compliance: EC Auction-ID: A1-45443-8

General data: VIN: VF3YD3MAU12D59459 Condition: used Mileage: 170,000 km Fuel: diesel Engine & performance: Power: 163 hp Capacity: 1997 cm³ Transmission: manual Auction-ID: A7-45467-2

Lemken Koralin 9/660 KU – Cultivator (demonstration machine) For sale is a Lemken Koralin 9/660 KU demonstration machine in very neat condition. General data • Machine type: Cultivator • Manufacturer: Lemken • Model: Koralin 9/660 KU • Working width: 6.6 m • Frame height: 550 mm • Delivery condition: assembled • Condition: Demonstration machine Technical equipment • Coulter variant: Goosefoot 380 mm • Additional coulter variant: Goosefoot coulter 380 mm carbide • Depth adjustment can be hydraulically controlled remotely • Trailing tools: flat bar roller FSW D400 • Trailing harrow behind roller, 2-row • Top link connection: Cat. 3 • Lower link connection: L3 Z3 (Cat. 3) • Support / Probe Wheels: 4 pieces 10.5 / 23-12, mechanical • Lighting system Europe (rear attachment) • Side identification: 2 pairs of red / white Condit ...

Flat roof mounting kit for 72 panels (12 rows of 6) Consisting of: Supports, End clamps, Intermediate clamps, Bolts, Ballast holders and sheet metal screws (see photos). You must determine / calculate the required amount of ballast yourself, this is not included. Auction-ID: A1-44832-50

Flat roof mounting kit for 10 panels (2 rows of 5) Consisting of: Supports, End clamps, Intermediate clamps, Bolts, Ballast holders and sheet metal screws (see photos). You must determine / calculate the required amount of ballast yourself, this is not included. Auction-ID: A1-44832-48

Flat roof mounting kit for 36 panels (6 rows of 6) Consisting of: Supports, End clamps, Intermediate clamps, Bolts, Ballast holders and sheet metal screws (see photos). You must determine / calculate the required amount of ballast yourself, this is not included. Auction-ID: A1-44832-49

Granite table with steel base, total table size 1000x631x1030mm, height height 850mm. Auction-ID: A1-45188-116

ELB SW3HA Flat Grinding Machine Type: Flat grinding machine Manufacturer: ELB Model: SW3HA X-axis travel: 600 mm Y-axis travel: 200 mm Z-axis travel: 350 mm Approx. dimensions (L x W x H): 1150 x 1150 x 1800 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-26

Hand bending machine Flat bar 30 x 8 mm Square steel 12 mm Round steel 15 mm Weight 0.025 t Package size max. 51 x 31 x 22 cm Condition: never used / new (5) Auction-ID: A1-45681-881

ELB SW3T Flat Grinding Machine Type: Flat grinding machine Manufacturer: ELB Model: SW3T X-axis travel: 600 mm Y-axis travel: 200 mm Z-axis travel: 350 mm Approx. machine weight: 1500 kg Approx. dimensions (L x W x H): 1150 x 1150 x 1800 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-28

Range X-600, Y-500, Z-250. Granite flat table. Auction-ID: A1-45188-103

Mercedes-Benz Sprinter 313 CDI Flatbed – Reinforced axle version General vehicle data • Manufacturer: Mercedes-Benz • Model: Sprinter 313 CDI (Type 906 OK 35) • Registration date: 13.03.2007 • Mileage: 150,000 km • Engine: 2,148 cc diesel (OM646) • Power: 95 kW / 129 hp • Transmission: 6-speed manual transmission • Propulsion: rear-wheel drive • Emission standard: Euro 4 with diesel particulate filter • Permissible total weight: 3,500 kg • Payload: approx. 1,350 kg • Towing capacity: 2,000 kg braked / 750 kg unbraked • Technical inspection valid until: 06/2026 • Approval: Truck open box Chassis / axles (reinforced version) • Front axle reinforced – axle load 1,650 kg • Rear axle reinforced – axle load 2,250 kg Structure • Flatbed with aluminium side walls • Lashing eyes in the loading floor • Side wall closures ...

Used Water Complete Bottling Line Flat Drinks 300 bph 18.9L CapSnap The CapSnap Adapta Series is a modular integrated bottle washing, filling, and capping system. It is the perfect solution for medium-sized HOD water bottling operations. Designed for adaptability – these machines can be configured to handle both 3-Gallon and 5-Gallon bottles. This complete system effectively handles 300 – 600 BPH. Manufacturer: CAP SNAP – Portola – USA Year of production: 1999 (completely refurbished in 2015 and since then it has worked only 500 hours) Capacity: 300 bph Required energy sources: air 6 bar, power 40 kW, cleaning water supply 2 bar and filling water supply Line composition: Semi-automatic cap removal device: This device is used to remove caps from bottles. Entrance conveyor: On this conveyor belt, the bottles are manually placed. Prewash with cold water through nozzles ...

Used Krones Filling Line for Flat Drinks in Glass 1997 Manufacturer: KRONES Bought new and installed in 1997 It fills juices, syrups, alcohol Accessories for bottles 0,2 – 0,7 – 1,0 L Capacity: 4,000 L/h Monoblock, frequency regulator Rinser for glass bottles Vacuum filler Krones Capper with Al MCA 28 caps Labeller KRONES–Binetta with precut paper labels, hot glue One label up to half the extent of the bottle (with a possibility for neck), accessories. The control unit replaced in this Krones line There are some conveyor belts in the Krones plant The equipment has relatively few operating hours It has been disconnected for the last 5 years and stored

Technical Specifications & Performance Data The Used Complete PET Line for Flat Drinks Tea is designed to enhance your beverage production efficiency with a remarkable speed of 22,000 bottles per hour. Manufactured in 2001, this second-hand line offers reliable performance with compatibility for various bottle formats ranging from 0.06 L, 0.10 L, to 0.50 L. This line supports PET container types, making it an ideal choice for flat drinks and tea production. Speed: 22,000 bottles/hour Container Types: PET Bottle Formats: 0.06 L, 0.10 L, 0.50 L Year of Manufacture: 2001 Advanced Automation & Control Systems This industrial packaging solution features state-of-the-art automation provided by leading manufacturers such as Krones and others. The integrated control systems facilitate seamless operations with minimal manual intervention, ensuring precision in filling, labeling, and capping proce ...

This is a plot with approximately 60m2 of flat asbestos-free cement sheets dimensions: 250x110x0.6 cm Auction-ID: A1-40134-326

Operating characteristics, o Feeding in closed pipe., o Outlet is guaranteed under pressure by 2 centripetal pumpsmade in AISI 304., o All material in contact with the product is made in stainless steel AISI 304 or higher., o The outflow system is completed with 2 pressure gauges in AISI 304 stainless steel and 2 micrometric valves to modulate the pressure of the lean and the concentration of the cream., o The sludge discharge is electronically controlled (through a hydrodynamic circuit) and takes place without interrupting the working process. The time interval between the single discharges can be programmed according to the characteristics of the product., o There is an automatic washing program at the end of the work in a closed cycle (CIP). Therefore, disassembly of the bowl is not required., Construction features and equipment, o Platform: fully made in stainless steel AISI 304 with ...

Operating characteristics, o Feeding in closed pipe., o Outlet is guaranteed under pressure by 2 centripetal pumpsmade in AISI 304., o All material in contact with the product is made in stainless steel AISI 304 or higher., o The outflow system is completed with 2 pressure gauges in AISI 304 stainless steel and 2 micrometric valves to modulate the pressure of the lean and the concentration of the cream., o The sludge discharge is electronically controlled (through a hydrodynamic circuit) and takes place without interrupting the working process. The time interval between the single discharges can be programmed according to the characteristics of the product., o There is an automatic washing program at the end of the work in a closed cycle (CIP). Therefore, disassembly of the bowl is not required., Construction features and equipment, o Platform: fully made in stainless steel AISI 304 with ...

Operating characteristics, o Feeding in closed pipe., o Outlet is guaranteed under pressure by 2 centripetal pumpsmade in AISI 304., o All material in contact with the product is made in stainless steel AISI 304 or higher., o The outflow system is completed with 2 pressure gauges in AISI 304 stainless steel and 2 micrometric valves to modulate the pressure of the lean and the concentration of the cream., o The sludge discharge is electronically controlled (through a hydrodynamic circuit) and takes place without interrupting the working process. The time interval between the single discharges can be programmed according to the characteristics of the product., o There is an automatic washing program at the end of the work in a closed cycle (CIP). Therefore, disassembly of the bowl is not required., Construction features and equipment, o Platform: fully made in stainless steel AISI 304 with ...

Operating characteristics, o Feeding in closed pipe., o Outlet is guaranteed under pressure by 2 centripetal pumpsmade in AISI 304., o All material in contact with the product is made in stainless steel AISI 304 or higher., o The outflow system is completed with 2 pressure gauges in AISI 304 stainless steel and 2 micrometric valves to modulate the pressure of the lean and the concentration of the cream., o The sludge discharge is electronically controlled (through a hydrodynamic circuit) and takes place without interrupting the working process. The time interval between the single discharges can be programmed according to the characteristics of the product., o There is an automatic washing program at the end of the work in a closed cycle (CIP). Therefore, disassembly of the bowl is not required., Construction features and equipment, o Platform: fully made in stainless steel AISI 304 with ...

This is a plot with approximately 60m2 of flat asbestos-free cement sheets dimensions: 250x110x0.6 cm Auction-ID: A1-40134-327