flat used for sale

CIP tank. Volume 2x 5.000 liter (1x compartment of 10.000 liter dividend in 2x compartments). Pressure in the tank: ATM. Aearator on top of the tank. Manholes on the side (oval 450 x 300 mm) and on the top (400 mm diameter) of the tank (1x for each compartment). CIP bowls for cleaning inside the tank. 3 Stainless steel legs. Outlet in the bottom, 110 mm height. Cylindrical height: 3.000 mm. Total dimensions: Ø 2.300 x 4.100 mm. The tank has a lot of lime on the inside., Additional features:, Tank already dismantled out of the factory and located in an outside warehouse in France., Has been a set of 3x tanks, stocknumber: #911 / #912 / #913., Type of Machine: CIP Tank, Volume: 2x 5.000 liter, Double jacketed: No, Insulation: No, Material: SS 304, Type of agitator: No agitator, CIP Spray bowls: Yes, Manhole: Yes 2x pieces, one in each compartment, Number of feet: 3, Internal height: 3.000 ...

Key data: 340 mm, 160 mm

Surface Grinding Machine Lipemec PM300 XYZ = 340 x 160 x 240 mm Permanent magnet 250 x 130 mm Max. diameter of whetstone 200 mm Distance between table top and spindle axis 315 mm All feeds manually Digital display Heidenhein, 0.001 mm steps on 2 axes Table brake Dressing Diamond

odel ASP250N Jaar 2007 Conditie Gebruikt Serienummer 30502218 Voorraad nummer 2008 Belt width 250 mm Belt speed 1.2 - 12 m/min. Power 3 x 400V, 50Hz, 0.5kW Dimensions 2150 x 650 x 1350 mm Weight 320 kg

Cup wheel Ø: 175 mm Table clamping surface: 150 x 250 mm large installation height without/with magnetic plate: 250/150 mm Grinding area: 100 x 360 or 150 x 190 mm Grinding spindle speed: 2800 rpm Drive motor: 380 V, 1.5 kW Approx. space requirement: 800 x 600 x 1600 mm Weight approx.: 200 kg

diameter range 8-16 mm shaft length under head 25-160 mm max. thread length 80 mm output pieces/min 100

Model: PLT-400 Year: 2022 Condition: Used Serial Number: 10492297 Stock Number: 3190J Belt width: 400 mm Product thickness 3 - 51 mm Belt speed: 0.36 - 24 m/min Compressed air: 0.7 l/min Power: 3 x 400V, 50Hz, 3kW Dimensions: 3300 x 1100 x 1500 mm Weight: 650 kg With extra long infeed conveyor of 1600 mm

with washer assembly diameter range 6 mm shaft length under head 80 mm max. thread length 62 mm output - pieces/min 450

A defective flatbed die-cutting machine IMG Klett is available. Chase inner dimensions X/Y: 1630mm/1210mm, max. cutting dimensions X/Y: 1600mm/1180mm, min. sheet dimensions X/Y: 650mm/450mm, max. sheet dimensions X/Y: 1200mm/1620mm, min. sheet thickness: 1mm, max. corrugated board thickness: 8mm, max. plastic corrugated material thickness: 8mm, gripper margin waste area: 9mm-15mm, max. cutting force: 400t, motor power: 22kW. Machine dimensions X/Y/Z: approx. 7550mm/5200mm/2450mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible.

diameter range 4-12 mm shaft length under head 150 mm max. thread length 130 mm output pieces/min 85-220

vibratory feeder diameter range 3-8 mm shaft length under head 150 mm max. thread length 80 mm output pieces/min 400

diameter range 2,5-6 mm shaft length under head 80 mm max. thread length 40 mm output pieces/min 600

with washer assembly diameter range 10 mm shaft length under head 100 mm max. thread length 65 mm output pieces/min 180

vibratory feeder diameter range 10 mm shaft length under head 100 mm max. thread length 65 mm output pieces/min 180

vibratory feeder diameter range 3-8 mm shaft length under head 80 mm max. thread length 58 mm output - pieces/min 250-480

vibratory feeder diameter range 10 mm shaft length under head 180 mm max. thread length 80 mm output - pieces/min 400

vibratory feeder diameter range 6-12 mm shaft length under head 180 mm max. thread length 80 mm output - pieces/min 100-330

vibratory feeder diameter range 8-16 mm shaft length under head 150 mm max. thread length 83 mm output pieces/min 120

vibratory feeder diameter range 10-20 mm shaft length under head 16-180 mm max. thread length 105 mm output pieces/min 100

diameter range 1,6-4 mm shaft length under head 50 mm max. thread length 30 mm output pieces/min 300-750

vibratory feeder diameter range 2,5-6 mm shaft length under head 80 mm max. thread length 40 mm output pieces/min 600

vibratory feeder diameter range 4-12 mm shaft length under head 150 mm max. thread length 105 mm output pieces/min 80-260

tube feeder for studs and headless parts diameter range 6-12mm shaft length under head 95 mm max. thread length 90 mm output pieces/min 55

vibratory feeder diameter range 3-8 mm shaft length under head 80 mm max. thread length 55 mm output pieces/min 300

vibratory feeder diameter range 3-8 mm shaft length under head 80 mm max. thread length 55 mm output pieces/min 300

vibratory feeder diameter range 6-12 mm shaft length under head 170 mm max. thread length 102 mm output pieces/min 125

Used meat flattener Demonstration system - Conveyor width: 600 mm - Quick belt change for hygienic cleaning ---------------------------------------------------- Used Meat flattener Presentation machine - Conveyor width: 600 mm - Quick belt change for hygienic cleaning

Flat gate valve, knife gate valve with flange connection, butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -without drive -Connection: DN80 -Width: 50 mm -Nominal pressure: 10 bar -Inner part: stainless steel -Number: 1x valves available -Price: per piece -Weight: 9.5 kg/piece

Spiral wound gasket, labyrinth housing gasket, flange gasket, high-pressure gasket -Manufacturer: Frenzelit, Novatec Premium flat gasket -Outer diameter: 126 mm -Inner diameter: 77 mm -Thickness: 2 mm -Quantity: 51x seals available -Price: per piece -Minimum order quantity: 15 pieces -Weight: 0.03 kg/pc.

Profile bending machine, bending machine, flat bar bender, horizontal bending/straightening press -Flat bar bender: hydraulic profile bending machine -Base: on casters, table folds on both sides -Operating mode: Manual and automatic operation -Accessories: see photos -Overall dimensions: 2155/1320/H1070 mm -Transport dimensions: 1320/840/H1245 mm -Weight: 404 kg

Flat-jaw thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine, thread rolling machine -Manufacturer: EWM, flat jaw thread rolling machine knurling machine -Type: unfortunately without type designation -Drive: 4.6/5.8 kW 1435/2890 rpm -Belt drive: 3-way adjustable -Knurling plate: RAA 1.0 -Central lubrication: -Dimensions: 1680/920/H1440 mm -Weight: 1308 kg

Cutting blades, replacement blades for guillotine shears, replacement cutting edges, cutting blades, shear blades, flat steel blades for profile steel shears, lever shears -Cutting blade: Replacement blade, flat steel blade for profile steel shears, lever shears -Cutting length: 229 mm -Hole spacing: 120 mm / M16 see photos -Dimensions: 229/15/H63 mm - Weight: 1.6 kg

Key data: 600 mm, 250 mm

Surface Grinding Machine Jung JF520 +Supromatic Built in 1979 The machine was completely overhauled in 1999 Grinding length: 600 mm Grinding width: 250 mm Operating hours: 15000 h Good condition

Various flat knitting machines with different gauges and Groz-Beckert needle sets are available. 1) Stoll CMS 303 TC, gauge: E10, nominal width: 1270mm, needle set: 10. 2) Stoll CMS 303 TC, gauge: E10, nominal width: 1270mm, needle set: 10. 3) Stoll CMS 303 TC, gauge: E12, nominal width: 1270mm, needle set: 12. 4) Stoll CMS 303 TC, gauge: E10, nominal width: 1270mm, needle set: 10. 5) Stoll CMS 340 TC, gauge: E12, needle set: 12. 6) Stoll CMS 411, gauge: E10, needle set: 10. 7) Stoll CMS 422 TC, gauge: E12, needle set: 12. 8) Stoll CMS 422 TC, gauge: E12, needle set: 12. 9) Stoll CMS 422.6, gauge: E12, needle set: 10. 10) Stoll CMS 422.6, gauge: E12, needle set: 10. 11) Stoll CMS 422.6, gauge: E14. 12) Stoll CMS 422.6, gauge: E14. 13) Stoll CMS 430.6, gauge: E12, nominal width: 2440mm, needle set: 12. 14) Stoll CMS 430.6, gauge: E12, nominal width: 2440mm, needle set: 10. 15) Stoll CMS 4 ...

A tubular machine (flat bag machine with winder) Honsel & Co., which was overhauled by PCM in 2003, is available. Roll width: 980mm, bag length range with wrap closure: 280mm-710mm, bag length range as tube without wrap: 710mm-1020mm. Includes a flexographic printing unit and extensive accessories for format changeover. Documentation available. On-site inspection is possible.

Key data: 600 mm, 200 mm

Magnet Nalex Type: 20/60 Plug 32 A Length 1.4 m Width 2 m Height 1.8 m Weight 2.8 t

Köckerling Allrounder Flatline 750 – 7.5 m – Year 2021 Universal tillage machine with 7.5 m working width Ideal for seedbed preparation and shallow tillage Robust design for high area performance Equipment: Chassis with transport function Hydraulic folding device Spring tine field Double roller for reconsolidation Trailing device Technology: Uniform working depth Good ground tracking High working speed possible Auction-ID: A7-46606-1014

Key data: 500 mm, 200 mm

Surface grinding machine Jung (built in 1949) for sale For sale is a Jung surface grinder, built in 1949, in age-appropriate condition. The machine is functional and can be viewed and tested on site. Technical data: Magnetic table: approx. 500 x 200 mm Year of Make: 1949 Condition: used, age-appropriate, functional The machine is ideal for use in the commercial sector or for lovers of classic machine tools. Sale only to tradespeople. Viewing possible by arrangement.

Surface Grinding Machine MONOPRECIS 1DR - #2 Travel X: 400 mm Travel Y: 150 mm Maxi grinding height (Z): 220 mm Year of construction: 1986 Axes X - Y - Z manual Magnetic chuck: manual / tilted Magnetic chuck dimensions: 255 x 130 mm Grinding wheel dimensions: Ø max 170 mm Voltage: 380 V Dimensions (L x W x H): 1300 x 1100 x 1600 mm Weight: approx 500 kg

Hand bending machine Height 100mm Weight 60 kg Dimensions 0.8 x 0.6 x 0.3 m Auction-ID: A7-46642-49

Hand bending machine Flat bar 30 x 8 mm Square steel 12 mm Round steel 15 mm Weight 0.025 t Package size max. 51 x 31 x 22 cm Condition: never used / new (5) Auction-ID: A7-46642-161

Flat steel bending machine The following bending tools are included: 1\" - 1 1/4\" - 1 1/2\" - 2\", - 2 1/2\", - 3\" Bending tools diameter 1\" to 3\" mm Wall thickness max. 16 mm Machine weight approx. 26 kg Package size max. 0.6 x 0.3 x 0.3 m Condition: never used / new (5) Auction-ID: A7-46642-171

2 pieces with reference A271.200R13-17 with diameter 200 mm/ 1 piece with reference A271.250R13-17 with diameter 250 mm/ unused and in original packaging Auction-ID: A1-46698-302

Flat bar bending machine Flat bar 100 x 5 mm Square steel 16 x16 mm Round steel 18 mm Angle steel 100 x 8 mm Dimensions 0.9 x 0.25 x 0.3 m Weight 0.025 t Condition: never used / new (5) Auction-ID: A7-46642-191

For about 130 modules facing south with a 10 degree inclination. Consisting of: center and end clamps, connectors, SpeedPorter & DomePorter for ballasting, K2 Peak, replacement mats and windbreaker. Auction-ID: A1-46700-22

Consisting of: SpeedPorter for ballast mounting, DomePeaks for elevation and middle and end clamps. Auction-ID: A1-46700-26

For substructure in east-west orientation with 10 degrees inclination with a length of 2.45m. Consisting of: end and center clamps, Dome Peak for elevation, Dome and SpeedPorter for ballast distribution, connectors and replacement building protection mats. Auction-ID: A1-46700-25

For about 150 modules facing south with a 10 degree inclination. Consisting of: center and end clamps, connectors, SpeedPorter & DomePorter for ballasting, K2 Peak, replacement mats and windbreaker. Auction-ID: A1-46700-24

For about 160 modules facing south with a 10 degree inclination. Consisting of: center and end clamps, connectors, SpeedPorter & DomePorter for ballasting, K2 Peak, replacement mats and windbreaker. Auction-ID: A1-46700-23

Key data: 1000 mm

Machine control ASYST MS 400, grinding wheel diameter 250 mm, max. grinding length approx. 1000 mm, with coolant device, fleece filter system and extraction

Height=1.23 m, Overall length= 0.83 m, Overall width= 2.13 m, Net weight= 332 kg,