flat used for sale

: 15-150 m/min capacity 90 degrees: round: 325 mm capacity 90 degrees: flat: 500 x 300 mm capacity 45 degrees: round: 300 mm capacity 45 degrees: flat: 300 x 300 mm : 200 mm : 200 x 200 mm dimensions of saw-band: 4200 x 34 x 1,1 mm : 60 mm : 165 mm min. dia.: 5 mm work height max.: 750 mm total power requirement: 3 kW dimensions: 1300 x 2050 x 1400 mm weight: 910 kg Standard equipment: - Fast miter adjustment from 90° to 30° stepless to 0.5° accuracy according to scale. The miter turning point is the point of intersection between saw band and Material system, thereby no change in the length dimension - At each angular position of the saw frame, the material is parallel in 90° tightened - Complete coolant device with electric submersible pump - Machine stand with chip collecting tray - Precise saw band carbide roller guide, saw blade brush - 1 saw blade on machine 4-6 ZpZ - MEBA high  ...

dimensions of saw-blade: 350 x 32 x 3,4 mm : 1700/3400 U/min capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180x70 mm capacity 45 degrees: round: 120/110 mm capacity 45 degrees: square: 100/95 mm capacity 45 degrees: flat: 135x60 mm output: 1,5/2,2 kw weight: 280 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

band speed: 33 m/s grinding band dimension: 75 x 2000 mm total power requirement: 3 kW weight of the machine ca.: 75 kg turning speeds: 2800 U/min Standard equipment: - Knife set for flat steel - Complete knife set for angle steel shears - Complete normal punching equipment - Quick release device for punches up to 31 mm - Support table for punching device, rectangular notching and flat steel shears - Bending stamp with matrices V 40 and V 70 - Electric contact stop (1.000 mm) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-band: 3320x27x0,9 mm : 40/80 m/min : 335 mm capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330x260 mm : 260 mm : 250 : 270x200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170x170 mm : 200 mm : 180 mm : 200x160 mm weight of the machine ca.: 640 kg dimensions of the machine ca.: 2140x1300x1950 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-blade: 350x32x4 mm vice: 180 mm : 1700/3400 U/min capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180x70 mm capacity 45 degrees: round: 120/110 mm capacity 45 degrees: square: 100/95 mm capacity 45 degrees: flat: 135x60 mm output: 2,2 kw weight: 225 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching force: 45 t hole diameter in sheet thickness: Ø 27x13 mm : 24 /min L-beam 90°: 80x80x8 mm L-beam 45°: 60x60x6 mm flat steel: 200x13 mm : 7 mm engine output: 2,2 kW weight: 760 kg Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 27 mm diameter - Rectangular notching device compl. with hold down - notch - Support table for punching device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 25-138 m/min dimensions of saw-band: 1440x13x0,65 mm capacity 90 degrees: round: 150 mm capacity 90 degrees: square: 125 mm capacity 90 degrees: flat: 150x125 mm capacity 45 degrees: round: 75 mm capacity 45 degrees: square: 50 mm capacity 45 degrees: flat: 70x50 mm weight of the machine ca.: 35 kg Standard features: - right and left miter - Single-phase 1800 watt motor - Safety switch - Electronic rotary speed controller 25-138 m / min. with torque control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 125 mm capacity 90 degrees: square: 125x125 mm capacity 90 degrees: flat: 130x125 mm : 80 mm : 80x80 mm : 80x80 mm capacity 60 degrees: round: 80 mm capacity 60 degrees: square: 50x50 mm capacity 60 degrees: flat: 80x80 mm sawband speed: 30-80 m/min. dimensions of saw-band: 1440x13x0,65 mm : 190 mm output: 230 V weight of the machine ca.: 19 kg dimensions of the machine ca.: 650x310x450 mm Domestic equipments: - Stepless speed regulation - Saw arm can be swiveled up to 60 ° right - Tape guides with 8 ball bearings - with stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 150 mm capacity 90 degrees: square: 140x140 mm capacity 90 degrees: flat: 150x140 mm : 100 mm : 90x90 mm : 100x90 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: square: 65x65 mm capacity 60 degrees: flat: 65x70 mm dimensions of saw-band: 1735x13x0,65 mm cutting speed: 30-80 m/min engine output: 1,5 kW : 150 mm weight of the machine ca.: 37 kg dimensions of the machine ca.: 900x460x500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 25-138 m/min dimensions of saw-band: 1440x13x0,65 mm capacity 90 degrees: round: 150 mm capacity 90 degrees: square: 125 mm capacity 90 degrees: flat: 150x125 mm capacity 45 degrees: round: 75 mm capacity 45 degrees: square: 50 mm capacity 45 degrees: flat: 70x50 mm weight of the machine ca.: 35 kg Standard features: - Single-phase 1800 watt motor - Safety switch - Electronic rotary speed controller 25-138 m / min. with torque control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 240 mm capacity 90 degrees: square: 240 x 240 mm capacity 90 degrees: flat: 165 x 210 mm : 195 mm : 185 x 185 mm : 130 x 190 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 85 x 85 mm capacity 60 degrees: flat: 85 x 120 mm : 170 mm : 145 x 145 mm : 60 x 195 mm cutting speed: 20 - 85 m/min dimensions of saw-band: 2725 x 27 x 0,9 mm : 315 mm work height max.: 900 mm Motor output: 1,2 kW Weight: 330 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-band: 2085x20x0,9 mm capacity 90 degrees: round: 185 mm capacity 90 degrees: square: 150x150 mm capacity 90 degrees: flat: 220x150 mm : 110 mm : 100x100 mm : 110x90 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: square: 70x70 mm capacity 60 degrees: flat: 70x70 mm voltage: 230 V sawband speed: 30-75 m/min. : 230 mm total power requirement: 2,35 kW weight of the machine ca.: 200 kg dimensions of the machine ca.: 1280x550x1480 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech  ...

: 45 to. no. of strokes: 24 Hub/min hole diameter in sheet thickness: max. Ø 27 in 13 mm : 80x80x8 : 60x60x6 mm flat steel: 300x10/200x13 mm : 7 mm engine output: 2.2 kW range L-W-H: 1550x820x1540 mm weight: 760 kg Standard equipment: - Complete knife set for flat steel shears - complete knife set for angle steel shears - complete standard punching equipment - Stamp quick release device for punches up to Ø 27 mm - Rectangular notching device complete with hold-down device - notch - Support table for punching device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 320 mm saw band length: 4160x 34 x 1,1 mm cutting width: 450 mm : 320 mm : 320 x 320 mm capacity 90 degrees: flat: 450 x 320 mm capacity 45 degrees: round: 320 mm : 180 mm Capacity 45° rectangular: 330 x 320 mm : 160 mm : 150 mm : 150 x 150 mm capacity 60 degrees: round: 240 mm capacity 60 degrees: square: 320 x 320 mm capacity 60 degrees: flat: 230 x 220 mm speed: 20 - 100 m/min total power requirement: 2,69 kW weight of the machine ca.: 1,03 t dimensions of the machine ca.: 2,23 x 0,88 x 1,89 m 280G,320G and 320GL are durable and stably laid out for universal separetion from full materials,pipes and profiles.A fast and precise mitre adjustment is characteristic within the range of 90 deg to 30 deg.The sawing property is situated in-line and becomes manuel strained in the angle of 90 deg. The machines are fitted with a removable coolant tank incorporating a submerged  ...

pressure: 110 t punching cross-cut in cmm: stroke: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Maximum punching force: 1100 kn Maximum shear force: 1700 kN Punch projection: 510 mm Holes 31 in 25 mm Flat steel: 500 x 22 mm Hydraulic hold-down for the flat steel knife Square notcher The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 300 mm saw band length: 3320 x 27 x 0,9 mm mm cutting width: 300 mm Control: NC capacity 90 degrees: flat: 330x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: square: 250 mm capacity 45 degrees: flat: 270 x 200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm band speed: 15 - 100 m/min total power requirement: 2,2 kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: 3,3 x 2,83 x 2,23 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 300 mm capacity 90 degrees: round: 102 mm capacity 90 degrees: square: 90 mm capacity 90 degrees: flat: 120x80 mm capacity 45 degrees: round: 90/80 mm capacity 45 degrees: square: 80/70 mm capacity 60 degrees: flat: 90x70/85x70 mm total power requirement: 1,5/2,0 kW weight of the machine ca.: 0,135 t dimensions of the machine ca.: 0,5 x 1,05 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 315/350 mm capacity 90 degrees: round: 125 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 160x90 mm capacity 45 degrees: round: 105 mm capacity 45 degrees: square: 90 mm capacity 60 degrees: flat: 80x100 mm total power requirement: 1,8/2,5 kW weight of the machine ca.: 0,2 t dimensions of the machine ca.: 0,6 x 1,22 x 1,06 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 227 mm saw band length: 2455 mm table height: 840 mm cutting width: 260 mm turning speed range:: 36 / 72 m/min dimensions of saw-band: 2455 x 27 x 0,9 mm capacity 90 degrees: round: 227 mm capacity 90 degrees: square: 220 mm capacity 90 degrees: flat: 260 x 220 mm capacity 45 degrees: round: 150 mm capacity 45 degrees: square: 145 mm capacity 45 degrees: flat: 200 x 220 mm total power requirement: 1,5 kW weight of the machine ca.: 0,25 t dimensions of the machine ca.: 0,8 x 1,4 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 250 mm capacity 90 degrees: round: 85 mm capacity 90 degrees: square: 75 mm capacity 90 degrees: flat: 100x65 mm capacity 45 degrees: round: 80 mm capacity 45 degrees: square: 75 mm capacity 60 degrees: flat: 90x60 mm total power requirement: 0,8 kW weight of the machine ca.: 0,04 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 100 mm capacity 90 degrees: flat: 130 x 80 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: square: 85 mm capacity 60 degrees: flat: 90 x 80 mm clamping range: 130 mm turning speeds: 30 / 60 U/min dimensions of saw-blade: 350 x 32 x 2,5 mm total power requirement: 1,1 / 2,2 kW weight of the machine ca.: 0,22 t dimensions of the machine ca.: 1200 x 860 x 900 m Special price: instead of 3997, -EUR now 3399, -EUR Manual miter saw for miter cuts from 45 ° right to 45 ° left, with high sawing performance. Made of robust cast iron, practical and safe for every cut. Basic equipment: externally adjustable coupling Locking device with a vice Can be moved on a prismatic guide with an adjustable bar Fixed clamps of the vice with axial adjustment for clamping the workpiece in the immediate vicinity ...

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180x70 mm capacity 45 degrees: round: 120/110 mm capacity 45 degrees: square: 10/95 mm capacity 45 degrees: flat: 135x60 mm engine: 2,5 0: 1700 / 3400 U/min weight of the machine ca.: 600 kg dimensions: 2,0 x 1,5 x 1,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 x 32 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180 x 70 mm capacity 45 degrees: round: 120 mm links capacity 45 degrees: round: 110 mm rechts capacity 45 degrees: square: 100 mm links capacity 45 degrees: square: 95 mm rechts capacity 45 degrees: flat: 135 x 60 mm dimensions of saw-blade: 350 x 32 turning speeds: 1700 / 3400 U/min capacity 45 degrees: round: 120 mm total power requirement: 1,5 / 2,2 kW weight of the machine ca.: 210 kg dimensions of the machine ca.: 1170 x 860 x 1600 mm Description: manual high-performance circular saw for cuts from 45 ° right to 45 ° left in aluminum and lightweight metal alloys, with 2 speeds Furnishing: - with pneumatic vices - The saw head can be tilted by 45 ° on one side - Heavy cast iron construction - ensures vibration-free operation and maximum precision - The  ...

width of the strips: 75 mm band length: 2000 mm band speed: 29,0 m/sek grinding width: 460 x 75 Plantisch mm Dust suction hood: 100 mm total power requirement: 3,0 kW 100% ED weight of the machine ca.: 66,0 kg range L-W-H: 1080 x 440 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding a ...

saw blade diameter: 350 mm cutting diameter: 120 mm capacity 45 degrees: flat: 180 x 50 mm capacity 45 degrees: round: 116 mm capacity 90 degrees: flat: 200 x 80 mm capacity 45 degrees: square: 100 x 100 mm capacity 90 degrees: square: 105 x 105 mm capacity 90 degrees: round: 120 mm weight of the machine ca.: 266 kg Furnishing: - Aluminum circular saw with manual clamping device - machine base - without saw blade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2000 mm band speed: 29,0 m/sek grinding width: 460 x 150 Plantisch mm Dust suction hood: 100 mm total power requirement: 4,0 kW 100% ED weight of the machine ca.: 84,0 kg range L-W-H: 1080 x 520 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding ...

Aluminum circular saw machine make KALTENBACH type SKL 450 NAYear of manufacture 2001Technical specifications:Saw blade diameter: 450 mmCutting speed stepless: 0 - 3000 mm / min.Rapid return: 4500 mm / min.Cutting range around 90 degree: 160 mm: square 90 degree: 145 mm: square 45 degree: 130 mm: flat 90 degree: 250 x 40 mm: flat 45 edree: 320 x 50 mmStroke length of the automatic feeder: 1000 mmMultiple stroke: 9999 mmSwivel range for multiple strokes: 180 degreeExternal dimensions approx .: 2700 x 1450 x 1900 mmWeight approx .: 1480 kgWorking height :: 1010 mmDrive power: 3.7 / 4.7 kWused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machi ...

Aluminum circular saw make KALTENBACH type SKL 400Fabr. -No: 46620 built in 1977Saw blade diameter: 400 mmCutting area 90 ° round: 135 mmCutting area 90 ° square: 120 x 120 mmCutting area 90 ° flat: 70 x 280 mmCutting area 45 ° square: 105 x 105 mmCutting area 45 ° flat: 55 x 120 mmFeed rate: 0 - 3000 mm / minDrive power: 6.0 hpWeight: 650 kgDimensions: 910 x 1200 x 1700 mmWith- pneum. vertical clamp- Measuring roller conveyor- discharge roller conveyorused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

turning length: 3000 mm turning diameter: 660 mm turning dia. in gap: 900 mm turning diameter over slide: 460 mm turning speeds: 25 - 1600 U/min quill:: 5 MK quill travel: 235 mm spindle bore: 105,0 mm engine output: 7,5 kW spindle taper: DIN 55029 D 1-8 weight of the machine ca.: 3.300 kg. dimensions: 4.630 x 1.200 x 1.529 mm characteristics - Versatile application possibilities in general mechanical engineering, Production, one-off production, ... - Central, handy switching for feeds and threads with lead screw and pull spindle - Prism bed made of gray cast iron, inductively hardened and precision ground - Modern main spindle bearings with tapered roller bearings in precision design - Hardened and ground gears and shafts, also in the feed gear - Standard with rapid traverse lengthways and flat to reduce non-productivetimes - Large spindle bore (105 mm) for workpieces with a large di ...

cutting diameter: 240 mm capacity 90 degrees: square: 200 x 200 mm capacity 90 degrees: flat: 285 x 200 mm capacity 45 degrees: flat: 200 x 200 mm capacity 45 degrees: round: 200 mm capacity 60 degrees: round: 130 mm capacity 60 degrees: square: 130 x 140 mm dimensions of saw-band: 2965 x 27 x 0,9 mm cutting speed: 37 - 74 m/min work height max.: 940 mm total power requirement: 1,3 kW weight of the machine ca.: 290 kg. range L-W-H: 1.250 x 1.500 x 1.700 mm Furnishing: - Miter cuts left 60 ° + 45 ° right - cutting speed 37 + 74 m / min. - Ball-bearing turntable for easy miter adjustment (durable) - Machine base with automatic cooling - Electrical display and monitoring of the machine The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Aluminum circular saw Fabr. MEP type Cobra 350Fabr. -No: 021746 LRX year 1993Cutting area 0 ° round: 120 mmCutting area 0 ° square: 105 x 105 mmCutting area 0 ° flat: 180 x 70 mmCutting area 45 ° round: 120/110 mmCutting area 45 ° square: 100 x 100/95 x 95 mm mmCutting area 45 ° flat: 135 x 60 mmSaw blade speeds: 1700/3400 rpm.Vise opening: 180 mmDrive power: 1.5 / 2.2 kWWeight approx. 160 kgWith- 2 hours. pneum. tensioners- Underframeused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

saw blade diameter: 275 mm capacity 90 degrees: round: 90 mm capacity 90 degrees: square: 80 mm capacity 90 degrees: flat: 100x70 mm capacity 45 degrees: round: 75 mm capacity 45 degrees: square: 70 mm capacity 60 degrees: flat: 80x60 mm total power requirement: 1,1/1,3 kW weight of the machine ca.: 0,12 t dimensions of the machine ca.: 0,5 x0,85 x0,95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 680 mm capacity 90 degrees: square: 640 mm : 820x610 capacity 45 degrees: round: 550 mm capacity 45 degrees: square: 550 mm capacity 45 degrees: flat: 550x600 mm capacity 60 degrees: round: 370 mm capacity 60 degrees: square: 370 mm capacity 60 degrees: flat: 370x600/450 mm saw band length: 7260 x 41 x 1,3 mm band speed: 15 - 100 m/min table height: 800 mm total power requirement: 5,5 kW weight of the machine ca.: 4,8 t dimensions of the machine ca.: 5,85 x 3,7 x 2,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 250 mm capacity 90 degrees: round: 80 mm capacity 90 degrees: square: 70 mm capacity 90 degrees: flat: 95x60 mm capacity 45 degrees: round: 70 mm capacity 45 degrees: square: 60 mm capacity 60 degrees: flat: 65x60 mm total power requirement: 1,0 kW weight of the machine ca.: 0,075 t dimensions of the machine ca.: 0,3 x0,8 x0,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 680 mm capacity 90 degrees: square: 640 mm : 1250x600 mm capacity 45 degrees: round: 680 mm capacity 45 degrees: square: 600 mm capacity 45 degrees: flat: 870x600 mm capacity 60 degrees: round: 580/550 mm capacity 60 degrees: square: 530/450 mm capacity 60 degrees: flat: 550x450 mm saw band length: 8140 x 54 x 1,6 mm band speed: 15 - 90 m/min table height: 855 mm total power requirement: 7,5 kW weight of the machine ca.: 5,3 t dimensions of the machine ca.: 5,75 x 4,2 x 2,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 370 mm cutting range round: 115 mm cutting range square: 105 mm cutting length min.: 730 mm cutting range flat: 70 x 240 mm cutting lenght max.: 4000 mm saw blade turning speeds: 1250 / 2500 U/min table rotating: 180 ° stroke: 120 mm feed stepless: 0 - 500 mm/min coolant: capacity 45 degrees: square: 95 mm capacity 45 degrees: flat: 50 x 200 mm cutting speed: 1250 / 2500 m/min weight of the machine ca.: 1,1 t dimensions of the machine ca.: 5,00 x 1,30 x 2,00 m - Fabr. - No.: 28232 und 28233 - pneunatic clamping head - coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 150 mm saw band length: 1735 x 13 x 0,9 mm cutting width: 180 mm capacity 60 degrees: round: 70 mm cutting range: 125 mm capacity 45 degrees: flat: 150 x 125 mm capacity 90 degrees: flat: 150 x 180 mm Working height: 870 mm total power requirement: 0,37 kW weight of the machine ca.: 62 kg dimensions of the machine ca.: 1640 x 400 x 950 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 320 mm saw band length: 3660 x 27 x 0,9 mm cutting width: 350 mm cutting capacity - round: 90° / 320 mm cutting capacity - flat: 90° / 350 x 320 mm cutting capacity - square: 90° /320 mm speed: 20 - 100 m/min : 260 mm capacity 45 degrees: flat: 250 x 180 mm : 180 mm : 160 mm : 150 x 150 mm : 150 mm total power requirement: 1,5 kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: 1900 x 1200 x 1350 m 280G,320G and 320GL are durable and stably laid out for universal separetion from full materials,pipes and profiles.A fast and precise mitre adjustment is characteristic within the range of 90 deg to 30 deg.The sawing property is situated in-line and becomes manuel strained in the angle of 90 deg. The machines are fitted with a removable coolant tank incorporating a submerged electric coolant pump which supplies coolant to both guide assemblies. These models ...

Hydraulic Miter Metal Cold Circular Semiautomatic Saw Fabr. KALTENBACH Type KKS 401 HMachine -No: 112710 built in 1991Saw blade size: 375/400/425 mmCutting width max .: 5 mmCutting speed: 10/20 m / minCutting area round: 130 mmxa0xa0xa0 90 ° square: 120 mmxa0xa0xa0 45 ° square: 110 x 110 mmxa0xa0xa0 90 ° flat: 250 x 40 mmxa0xa0xa0 45 ° flat: 170 x 50 mmSaw blade feed speed: 0 - 1200 mm / minDrive power: 1.7 / 2.6 kWOutside dimensions: 1170 x 1070 x 1960 mmWeight (machine only): 1350 kglittle used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Vertical tank made of stainless steel by TM IBÉRICA with a total capacity of 800 liters. Flat top bottom with support for agitation, folding crescent-shaped lid and flange connections. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Maker TM IBERIAN Model TK-403B Guy DISPENSER Material Stainless steel Specifications: Volume 800 liters total Background type Sup. flat / Inf. conical Type of agitation Propeller Agitation motor 0.55 kW - 1390 rpm Envelope 4 legs Lower bottom tubulatures x1 Breaker x1 Outer diameter body 980 rpm Body height 1100 mm Body height + backgrounds (TOTAL: 3000 mm)

Hydr. Metal circular saw make KALTENBACH type KKS 401Machine -No: 113025 Year 1991Saw blade size: 375 - 425 mmCutting area round: 130 mmxa0xa0xa0 90 ° square: 120 x 120 mmxa0xa0xa0 90 ° flat: 250 x 40 mmxa0xa0xa0 45 ° flat: 170 x 50 mmCutting width: 5.0 mmSaw blade hole: 50 mmSaw blade feed speed: 0 - 1200 mm / min.Opening stroke of the vice: 160 mmTurntable adjustment stepless: + - 60 °Cutting speed: 10 - 60 m / min.Drive power: 5.5 kWWeight approx: 1.35 tOutside dimensions approx: 1360 x 720 x 2100 mmWith- aut. duty cycle for straight and oblique cuts- mot. Transmission adjustment- hydr. Drehtischklemmung- hydr. Turntable rotation- mot. saw gear adjustmentused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer an ...

Vertical tank made of stainless steel by TM IBÉRICA with a total capacity of 800 liters. Flat top bottom with support for agitation, folding crescent-shaped lid and flange connections. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Maker TM IBERIAN Model TK-403B Guy DISPENSER Material Stainless steel Specifications: Volume 800 liters total Background type Sup. flat / Inf. conical Type of agitation Propeller Agitation motor 0.55 kW - 1390 rpm Envelope 4 legs Lower bottom tubulatures x1 Breaker x1 Outer diameter body 980 rpm Body height 1100 mm Body height + backgrounds (TOTAL: 3000 mm)

Vertical tank made of stainless steel by OLIVER Y BATLLE with a total capacity of 800 liters. Flat top bottom with support for agitation, folding crescent-shaped lid and flange connections. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Maker OLIVER AND BATLLE Guy DISPENSER Material Stainless steel 316 Specifications: Volume 800 liters total Background type Sup. flat / Inf. conical Type of agitation Propeller Agitation motor 0.55 kW - 1390 rpm Envelope 4 legs Lower bottom tubulatures x1 Breaker x1 Outer diameter body 950 rpm Body thickness 3 mm Body height 1100 mm Body height + backgrounds 1375 mm (TOTAL: 3000 mm) Lower bottom thickness 3 mm Lower exit height 1050 mm

Vertical tank made of stainless steel by OLIVER Y BATLLE with a total capacity of 800 liters. Flat top bottom with support for agitation, folding crescent-shaped lid and flange connections. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Maker OLIVER AND BATLLE Guy DISPENSER Material Stainless steel 316 Specifications: Volume 800 liters total Background type Sup. flat / Inf. conical Type of agitation Propeller Agitation motor 0.55 kW - 1390 rpm Envelope 4 legs Lower bottom tubulatures x1 Breaker x1 Outer diameter body 950 rpm Body thickness 3 mm Body height 1100 mm Body height + backgrounds 1375 mm (TOTAL: 3000 mm) Lower bottom thickness 3 mm Lower exit height 1050 mm

Vertical tank manufactured by aguilar and rooms in stainless steel 316L with a total capacity of 610 liters (500 useful liters). Flat top bottom with folding lid with handle and stirring support (triple-blade propeller type) Conical bottom with discharge through the bottom (DN50 PN10). About 3 posters. General characteristics: Maker AGUILAR AND ROOMS Guy Vertical mixer tank Material Stainless steel 316L Year of manufacture 1995 Weight 150 kg Body Atm design pressure Ambient design temperature Specifications: Volume 500 L (TOTAL: 610 L) Background type Sup. flat - conical inf. Type of agitation Triple-belic propeller Envelope 3 posters Upper bottom tubulatures x1 Lower bottom tubulatures x1 Outer diameter body 850 mm Body thickness 3 mm Body height 1000 mm Body height + backgrounds 1255 mm (TOTAL WITH AGITATION: 1995 mm) Top bottom thickness  ...

Vertical tank made of inozidable steel with an approximate capacity of 220 liters. Flat top bottom with removable lid and manual closures. On the lid there is a man's mouth with manually folding lid, tubulaadura with NW type thread and tubuladura with inner thread. Inclined flat bottom with flange for discharge. Mounted on 3 legs. General characteristics: Maker SCHRADER Material Stainless steel Upper bottom tubulatures: Thread NW outer diam 65 mm - inner diam 38 mm Inner thread junction 30 mm Lower bottom tubulatures: Discharge flange: 97 mm outer diam - 38 mm inner diam Specifications: Volume 220 l approx. Background type Slope Envelope 3 legs Upper bottom tubulatures x2 Lower bottom tubulatures x1 Man's mouth 300 mm Outer diameter body 600 mm Body height 850 mm

Hydraulic hack saw Fabr. KLAEGER type HK 265Fabr. -No: 125014 built in 1993Cutting area 90 ° round: 265 mm90 ° flat: 220x260 / 225 x 225 mm45 ° round: 160 mm45 ° flat: 160 x 240 mmSaw blade size: 400 x 35 x 2 mmStroke length: 105 mmDouble strokes: 74/148 h / minCutting speed: 15.5 / 31 m / minFeed control: hydraulicDrive power: 1.6 / 1.9 kWDimensions L x W x H: 1400 x 500 x 900 mmWeight approx .:290 kgWith- hydr. Withdrawal in idle stroke- hydr. Eilhochgang- accelerated return stroke- miter vice- automatic shutdown- Cooling deviceused, from an operational resolution, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Horizontal band saw make PEHAKA type HS 260Year of construction 1981Cutting area around 90 °: 260 mmCutting area flat 90 °: 400 x 155/370 x 180 mmCutting area square 90 °: 220 x 220 mmCutting area around 45 °: 170 mmCutting area flat 45 °: 160 x 145 mmCutting area IPE 45 °: NP 24stepless saw blade speed: 20 - 60 mm / min.Saw band size: 3650 - 3700 x 25 x 0.9 mmDrive power: 0.75 kWWeight approx: 360 kgOutside dimensions approx: 2200 x 1000 x 1300 mmWith- Returning deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Horizontal band saw machine make PEHAKA type HS 340Machine -No: 27354 for semi-automatic workflowTechnical specifications:Working space 90 ° round: 340 mmWorking area 90 ° flat: 340 x 500 mmWorking space 45 ° round: 230 mmWorking area 45 ° flat: 200 x 300 mmControl range: 12 - 80 m / minSaw drive: 4 kWSaw band: 4860 x 32 x 1.1 mmRoll diameter: 500 mmRequired space: 2700 x 1600 x 1900 mm highWeight: 1050 kgWith- Infinitely variable cutting speed- hydr. Raising and lowering the saw frame- Control panel on the saw armused, in good working conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Horizontal band saw make JAESPA type W 260Fabr. -No: 14759 built in 1989Technical specifications:Cutting areas90 ° round: 260 mm90 ° flat: 410 x 200 mm90 ° square: 260 x 260 mm45 ° round: 250 mm45 ° flat: 220 x 220 mm45 ° square: 245 x 210 mmSaw band speed continuously: 17 - 106 m / minSaw band dimensions: 3660 x 25 x 0.9 mmDrive power: 1.1 kWExternal dimensions approx .: 1950 x 950 x 1600 mmWeight approx: 520 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools