flat used for sale

Mounting kit for 24 solar panels (4 rows of 6) Consisting of: Supports, End clamps, Intermediate clamps, Bolts, Ballast holders and sheet metal screws (see photos). You must determine / calculate the required amount of ballast yourself, this is not included. Auction-ID: A1-46381-488

Mounting kit for 6 solar panels (2 rows of 3) Consisting of: Supports, End clamps, Intermediate clamps, Bolts, Ballast holders and sheet metal screws (see photos). You must determine / calculate the required amount of ballast yourself, this is not included. Auction-ID: A1-46381-485

3 flat trolleys in different sizes, 1x 100x66 cm H=107, 1x 160x90 cm H=105 cm 1x 120x80 cm H-90 cm Auction-ID: A1-50656-140

Mounting kit for 72 solar panels (12 rows of 6) Consisting of: Supports, End clamps, Intermediate clamps, Bolts, Ballast holders and sheet metal screws (see photos). You must determine / calculate the required amount of ballast yourself, this is not included. Auction-ID: A1-46381-490

grinding length: 600 mm grinding width: 375 mm workpiece height: 325 mm grinding height: 325 mm table load: max. 300 kg table longitudinal travel: max. 650 mm table speeds: 1 - 30 m/min grinding spindle speed: 1440/2900 U/min grinding wheel size: 300 x 50 x 76,2 mm grinding spindle drive: 3,7/4,7 kW vertical feed grinding spindle max.: 180 mm/min. cross travel: 350 mm cross adjustment: 1 - 40 mm rapid traverse cross: 1200 mm/min total power requirement: 9 kW weight of the machine ca.: 3,3 t dimensions of machine L x W x H: 2,75 x 2,10 x 2,05 m - with autom. positioning - Accessories: magnetic plate 600 x 350 mm, grinding wheel with flange, wheel trueing attachment, DRO on Y- and Z-axis, 1 grinding wheel with flange separate, balancing scale, wet grinding attachemnt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 600 mm grinding width: 400 mm workpiece height: 375 mm table adjustment - longitudinal: max. 660 mm table cross movement: max. 410 mm distance spindle center to table: max. 525 mm table speeds: 2 - 28 m/min table load: max. 400 kg cross feed of table intermittent: 3 - 40 mm rapid traverse cross: 1 m/min grinding wheel size: ø 300 x 50 x ø 76 mm total power requirement: 8 kW weight of the machine ca.: 2,1 t dimensions of machine L x W x H: 2,75 x 1,7 x 2,42 m Accessories: magnetic plate 600 x 400 mm, grinding wheel with flange, 1 flange separate, DRO on Y-axis (vertical), wheel trueing attachment, balancing scale, wet grinding attachment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 400 mm grinding width: 210 mm workpiece height: 300 mm grinding wheel width x diameter: 250 x 15 x 51 mm turning speeds: 1100-2800 U/min forward and return motion adjustable: 0-3 m/min : 350 x 200 mm total power requirement: 2,1 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2 x 1,5 x 1,8 m Surface grinding machine with: - Coolant system - Heidenhain digital readout The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

6x roll of Spectra strip Hi Flex Flat Ribbon Cable in box Manufacturer: Amphenol Spectra Strip USA Volts: 300 Auction-ID: A1-50936-71

6x roll of Spectra strip Hi Flex Flat Ribbon Cable in box Manufacturer: Amphenol Spectra Strip USA Volts: 300 Auction-ID: A1-50936-68

7x roll of Spectra strip Hi Flex Flat Ribbon Cable in box Manufacturer: Amphenol Spectra Strip USA Volts: 300 Auction-ID: A1-50936-72

6x roll of Spectra strip Hi Flex Flat Ribbon Cable in box Manufacturer: Amphenol Spectra Strip USA Volts: 300 Auction-ID: A1-50936-70

6x roll of Spectra strip Hi Flex Flat Ribbon Cable in box Manufacturer: Amphenol Spectra Strip USA Volts: 300 Auction-ID: A1-50936-69

grinding length: 450 mm grinding width: 250 mm workpiece height: 275 mm table surface area: 550 x 200 mm distance spindle center to table: max. 400 mm table speeds: 0 - 30 m/min cross feed: 0 - 60 mm/Hub rapid traverse cross: 1,2 m/min grinding wheel size: ø 250 x 30 x ø 51 mm grinding spindle speed: 1400 / 2800 U/min total power requirement: 4 kW weight of the machine ca.: 1 t dimensions of machine L x W x H: 1,55 x 1,23 x 1,80 m Accessories: magnetic plate 450 x 200 mm, grinding wheel with flange, wheel trueing attachment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 450 mm grinding width: 250 mm workpiece height: 275 mm table surface area: 760 x 200 mm distance spindle center to table: max. 400 mm table speeds: 0 - 30 m/min cross feed: 0 - 60 mm/Hub rapid traverse cross: 1,2 m/min grinding wheel size: ø 250 x 30 x ø 51 mm grinding spindle speed: 1400 / 2800 U/min total power requirement: 4 kW weight of the machine ca.: 1 t dimensions of machine L x W x H: 1,55 x 1,23 x 1,80 m Accessories: magnetic plate 450 x 175 mm, grinding wheel with flange, wet grinding attachment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2% ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 30,200 litres Material: stainless steel 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Thermoregulated Conical roof 1 eccentric chimney at the front Ø 200 mm 2 Stainless steel flags 1 thermometer 6 lifting rings Ferrule 1 oval door 310×420 mm 1 partial drain valve DN 65 1 tap for level probe Flat bottom inclined 2% with housing 1 total drain valve with plug Dimensions Diameter: 2800 mm Total height: 6000 mm Ferrule ...

150 hL – 304 stainless steel flat bottom tank with casing This 150 hL 304 stainless steel storage tank is designed for winemaking and liquid storage applications in the cellar. Its simple and robust design, combined with a roof with a chimney centred, a rectangular door with external opening, a flat bottom with a boilard and suitable racking equipment, makes it a reliable and immediately usable solution to complement an existing winery capacity. Technical characteristics Material: 304 stainless steel Total capacity: 15,000 litres Roof 2 lifting rings 1 chimney centred with hatch Ferrule 1 ladder support bar 1 door rung 1 rectangular door with external opening 1 taster tap Flat bottom with boilard 1 stainless steel total drain valve on square flange 1 sludge without cap Dimensions Diameter: 2800 mm Height: 4000 mm Location: Civray Equipment sold loaded on truck: additiona ...

10 hL – 304 stainless steel tank flat bottom This vertical cylindrical stainless steel tank with a capacity of 10 hL is designed for the storage of liquids in wine, brewing and cider environments. Its configuration, combined with a flat bottom, a closed flat roof and simple emptying equipment, makes it a robust and immediately usable second-hand solution to complement a small existing storage capacity. Technical characteristics Material: stainless steel Total capacity: 1,000 litres Closed vertical cylindrical tank with flat bottom Roof 1 round hatch diameter 200 mm Shell 1 drain valve at the bottom of the tank Connection not GAS 1\"1/4 Flat bottom Dimensions Diameter: 960 mm Height: 1600 mm Dimensions Diameter: 960 mm Height: 1600 mm Location: Monteux (84) Equipment sold loaded on truck: dismantling and loading offered by the seller. Auction-ID: A1-51122-243

Tarpaulin trailer with left and right sliding curtains Type: PSX2 Variant: C1 Version: 2000 Category: O2 Genre: trailer Bodywork: originally open platform/sidewalls, here equipped with a high structure with tarpaulin Number of axles: 2 GVW: 2,000 kg Empty weight: 600 kg Theoretical payload: 1,400 kg Maximum axle load 1: 1,000 kg Maximum axle load 2: 1,000 kg Vertical load on drawbar: 120 kg Dimensions shown: Overall length 5,790 mm, width 2,100 mm Usable dimensions for the model: approx. 4,050 × 1,780 mm Tires: 155 R13 84N Approval: e42007/46025302 First registration date: 24/08/2017 Papers: German registration documents present. Visible equipment Double axle Galvanized chassis Sidewalls High frame with red tarpaulin Side opening of the tarpaulin Jockey wheel Override brake V-shaped drawbar Recommended title for Vavato: Anssems PSX C ...

48.8 hL – NEW – Temperature-controlled 304 stainless steel tank, sloping flat bottom, floating cap New material. Technical characteristics Model: SPAIPSER5000 Material: 304 stainless steel Total capacity: 4,880 litres Bottom: sloping flat, slope 4% Roof: floating cap Interior finish: bright annealing Exterior finish: brushed Roof 2 vacuum lifting rings 1 floating cap 316L stainless steel with complete pneumatic system Valve. Ferrule 1 jib crane 1 lifting winch 1 ladder support 1 rectangular door 420×530 mm at the bottom of the ferrule with external opening 1 partial drain with square flange 100×100, stainless steel ball valve 40 MÂCON, stainless steel stopper 1 tasting tap on DIN 15 tap 1 needle thermometer 1 complete stainless steel level with tap and stainless steel ruler (polycarbonate tube) 4 coil towers with 2.15 m² exchange surface on the ferrule 2 coil towers wit ...

302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2% ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 30,200 litres Material: stainless steel 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Thermoregulated Conical roof 1 eccentric chimney at the front Ø 200 mm 2 Stainless steel flags 1 thermometer 6 lifting rings Ferrule 1 oval door 310×420 mm 1 partial drain valve DN 65 1 tap for level probe Flat bottom inclined 2% with housing 1 total drain valve with plug Dimensions Diameter: 2800 mm Total height: 6000 mm Ferrule ...

500 hL – Cidec – Flat-bottom fibreglass tank CIDEC vertical fibreglass tank, with a total capacity of 50,000 litres, designed for the storage of liquids in wine-growing, cider-making, agri-food or industrial environments. Thanks to its high-capacity design, its flat bottom with box and its stainless steel racking and emptying equipment, this tank allows functional operation for the storage and processing of liquids in outdoor or indoor vats. Technical characteristics Brand: CIDEC Total capacity: 50,000 litres Material: fibreglass Configuration: vertical cylindrical tank Roof Domed roof 1 chimney Shell 1 taster tap 1 tap and level strip 1 stainless steel partial drain valve 1 oval door Bottom Flat bottom with box 1 stainless steel total drain valve Dimensions Diameter: 3000 mm Height: 9000 mm Location: Bollène (84) Equipment sold loaded on truck: additional mandatory di ...

Hapert TA tandem axle flatbed trailer – 2018 – 3,500 kg – 405 × 245 cm Specifications: Brand: Hapert Manufacturer: Wagenbouw Hapert B.V. Type: TA Year of construction: 2018 Chassis number: XLH00000000810499 Number of axles: 2 Maximum permissible total weight: 3,500 kg Maximum axle load: 1,750 kg per axle Braking system: overrun braked Overrun/pull device: AL-KO Baking size inside: approximately 405 × 245 cm Cargo floor height: approximately 70 cm from the ground Height of side panels: approximately 31 cm Cargo floor: flat plywood/non-slip floor Chassis: Galvanized Features: Aluminum folding side and rear boards Raised pre/stack rack for long load Tandem axle chassis AL-KO overrun brake and clutch Spare wheel, mounted under the load floor Aluminum checker plate drawbar/tool box Folding/adjustable support wheel V-drawbar Binding options around the  ...

Variant: 27 Version: VB Trade name: Machinetransporter Type of use: machine carrier European Grade: O2 Number of axles: 2 Type: Center Axle Trailer GVW: 2,700 kg Empty weight: 570 kg Theoretical payload: 2,130 kg Maximum axle load: 1,350 kg + 1,350 kg Maximum vertical load on hitch: 150 kg Dimensions indicated on the document: length 4,690 mm × width 2,100 mm Tyres: 195/50 R13 Approval: e42007/46017002 Date of the certificate of conformity: 27/04/2016 German registration: German document present Indicated registration date: 08/06/2016 Builder: Vlemmix Aanhangwagens, Netherlands Visible equipment Gear platform Double axle Large lift-up mesh rear ramp Galvanized chassis V-shaped drawbar Jockey wheel Override brake Mudguards Rings/tie-down points on the sides Metal loading floor Street lighting Auction-ID: A3-46140-35952

225 hL (91 + 134 hL) – Pierre Guerin – Stainless steel 304 shell compartmentalized tank with sloping flat bottom Technical characteristics Brand Pierre Guerin Capacity: 134 hl + 91 HL Total capacity: 22,500 liters Material: 304 L Interior finish: raw cold rolling Exterior finish: brushed Roof 1 central chimney with stainless steel hatch DN 500 mm with clamping studs 1 50 Mâcon tap on chimney, internally / externally threaded 2 lifting rings Ferrule gangway support 1 rectangular stainless steel door 410 x 530 mm with external opening with mud flap 1 partial drain valve with stainless steel ball DN 50 with decanter elbow 1 stainless steel taster 8 turns of shell circuit1 stainless steel ball drain valve DN 50 Roof 1 chimney off-centre at the front with stainless steel hatch DN 500 mm with clamping studs 1 tap 50 Mâcon on chimney, threaded inside / outside Ferrule 1 recta ...

396 hL (285 + 111 hL) – Tec Inox – 304 stainless steel tank compartmentalized flat bottom 2% on a slab Vertical storage tank in TEC INOX stainless steel of 396 hL, divided into 2 independent compartments (285 hL and 111 hL). Previously used for wine storage, it allows several separate batches to be managed within the same tank. Technical data Brand: TEC INOX Total capacity: 396 hL (285 + 111 hL) Construction: 304 food-grade stainless steel Type: compartmentalized vertical storage tank Flat bottom with 2% slopeLayout : on concrete raft Previous use: wine Equipment per compartment 1 oval door stainless steel autoclave 310 × 420 mm 1 level indicator1 total emptying 1 partial emptying 1 stainless steel chimney Ø 200 mm Dimensions Total height: 6,000 mm Location: Bollène (84) Equipment sold loaded on truck: additional mandatory dismantling and loading fees apply to this lot. ...

178 hL – Alfa Laval – 316L stainless steel tank with 2% sloping flat bottomALFA LAVAL 316L stainless steel tank with 178 hL, equipped for thermoregulation, ideal for storage and temperature management in the cellar. Its design with a 2% sloping flat bottom facilitates emptying and daily work, while maintaining a simple installation in the winery. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 17,800 litres Material: 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Conical roof 1 eccentric chimney at the front Ø 200 mm 1 thermometer Ferrule lifting rings1 oval door 310×420 mm 1 partial drain valve DN 65 1 level with tap Flat bottom inclined 2% with box 1 total drain valve with plug Dimensions Diameter: 2800 mm Ferrule height: 2800 mm Total height: 3500 mm Location: Civray Equipment sold loaded on truck ...

334 hL (96 + 238 hL) – Tec Inox – 304 stainless steel tank compartmentalized flat bottom 2% on a slab Vertical storage tank in TEC INOX stainless steel of 334 hL, divided into 2 independent compartments (96 hL and 238 hL). Previously used for wine storage, it allows several separate batches to be managed within the same tank. Technical data Brand: TEC INOX Total capacity: 334 hL (96 + 238 hL) Construction: 304 food-grade stainless steel Type: vertical compartmentalized storage tank Flat bottom with 2% slopeLayout : on concrete raft Previous use: wine Equipment per compartment 1 oval door stainless steel autoclave 310 × 420 mm 1 level indicator1 total emptying 1 partial emptying 1 stainless steel chimney Ø 200 mm Dimensions Total height: 6,000 mm Location: Bollène (84) Equipment sold loaded on truck: additional mandatory dismantling and loading fees apply to this lot. A ...

178 hL – Alfa Laval – 316L stainless steel tank with 2% sloping flat bottomALFA LAVAL 316L stainless steel tank with 178 hL, equipped for thermoregulation, ideal for storage and temperature management in the cellar. Its design with a 2% sloping flat bottom facilitates emptying and daily work, while maintaining a simple installation in the winery. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 17,800 litres Material: 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Conical roof 1 eccentric chimney at the front Ø 200 mm 1 thermometer Ferrule lifting rings1 oval door 310×420 mm 1 partial drain valve DN 65 1 level with tap Flat bottom inclined 2% with box 1 total drain valve with plug Dimensions Diameter: 2800 mm Ferrule height: 2800 mm Total height: 3500 mm Location: Civray Equipment sold loaded on truck ...

125 hL – Vautier – Stainless steel tank 304 flat bottom Technical characteristics Cylindrical vertical flat bottom closed Brand : VAUTIER Volume : 12 500 L Material : stainless steel 304 Roof Flat roof 1 central hatch Lifting rings Marcs sprinkler in addition 1 bolted footbridge, but half level welded Ferrule Rectangular door with external opening 550×430 mm Partial ball drain valve on square flange in MÂCON 40 Taster tap Ladder support bar Builder's plate Bottom Total ball drain valve on square flange in MÂCON 40 Flat bottom Dimensions Diameter: 2400 mm Height: 3400 mm Location: Monteux (84) Equipment sold loaded on truck: mandatory additional dismantling and loading fees apply to this lot. Auction-ID: A1-51122-264

302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2% ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 30,200 litres Material: stainless steel 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Thermoregulated Conical roof 1 eccentric chimney at the front Ø 200 mm 2 Stainless steel flags 1 thermometer 6 lifting rings Ferrule 1 oval door 310×420 mm 1 partial drain valve DN 65 1 tap for level probe Flat bottom inclined 2% with housing 1 total drain valve with plug Dimensions Diameter: 2800 mm Total height: 6000 mm Ferrule ...

302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2% ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 30,200 litres Material: stainless steel 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Thermoregulated Conical roof 1 eccentric chimney at the front Ø 200 mm 2 Stainless steel flags 1 thermometer 6 lifting rings Ferrule 1 oval door 310×420 mm 1 partial drain valve DN 65 1 tap for level probe Flat bottom inclined 2% with housing 1 total drain valve with plug Dimensions Diameter: 2800 mm Total height: 6000 mm Ferrule ...

302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2% ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 30,200 litres Material: stainless steel 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Thermoregulated Conical roof 1 eccentric chimney at the front Ø 200 mm 2 Stainless steel flags 1 thermometer 6 lifting rings Ferrule 1 oval door 310×420 mm 1 partial drain valve DN 65 1 tap for level probe Flat bottom inclined 2% with housing 1 total drain valve with plug Dimensions Diameter: 2800 mm Total height: 6000 mm Ferrule ...

150 hL – 304 stainless steel flat bottom tank with casing This 150 hL 304 stainless steel storage tank is designed for winemaking and liquid storage applications in the cellar. Its simple and robust design, combined with a roof with a chimney centred, a rectangular door with external opening, a flat bottom with a boilard and suitable racking equipment, makes it a reliable and immediately usable solution to complement an existing winery capacity. Technical characteristics Material: 304 stainless steel Total capacity: 15,000 litres Roof 2 lifting rings 1 chimney centred with hatch Ferrule 1 ladder support bar 1 door rung 1 rectangular door with external opening 1 taster tap Flat bottom with boilard 1 stainless steel total drain valve on square flange 1 sludge without cap Dimensions Diameter: 2800 mm Height: 4000 mm Location: Civray Equipment sold loaded on truck: additiona ...

Schmitz AFPR 18 2-axle flatbed/container trailer – 2006 – 18,000 kg – twistlocks Specifications: Brand: Schmitz Type: AFPR 18 Year of construction: 2006 Version: 2-axle flatbed/container trailer Chassis number: WSMA00000001216522 Number of axles: 2 Tare weight: 3.900 kg Payload: 14,100 kg Maximum permissible weight: 18,000 kg Maximum axle load: 9,000 kg per axle Towing eye: 50 mm Suspension: air suspension Braking System: WABCO Trailer EBS Length of cargo floor: approx. 6,430 mm Floor height in driving position: approx. 950 mm Features: Open shelf version Twist Locks for Container/Exchange Body Transportation Wooden cargo floor Fixed advance at the front 2-axle air suspension chassis 2x height regulator for air suspension Width signs Various mounting options along the load floor 50 mm towing eye WABCO Trailer EBS Particularities: German regist ...

444 hL (122 + 322 hL) – Tec Inox – Stainless steel 304 compartmentalized tank with flat bottom 2% on a slab Vertical storage tank in TEC INOX stainless steel of 444 hL, divided into 2 independent compartments (122 hL and 322 hL). Previously used for wine storage, it allows several separate batches to be managed within the same tank. Technical characteristics Brand: TEC INOX Total capacity: 444 hL (122 + 322 hL) Construction: 304 food-grade stainless steel Type: compartmentalized vertical storage tank Flat bottom with 2% slopeLayout : on concrete raft Previous use: wine Equipment per compartment 1 oval door stainless steel autoclave 310 × 420 mm 1 level indicator1 total emptying 1 partial emptying 1 stainless steel chimney Ø 200 mm Dimensions Total height: 6,000 mm Location: Bollène (84) Equipment sold loaded on truck: additional mandatory dismantling and loading fees ap ...

300 hL – Flat-bottom fiberglass tank This fiberglass tank with a capacity of 300 hL is designed for the storage of liquids in the wine and agri-food environment. Its configuration, combined with a closed cylindrical tank, a flat bottom with casing and simple racking and control equipment, makes it a robust and immediately usable second-hand solution to complement an existing storage capacity. Technical characteristics Material: fibreglass Total capacity: 30,000 litres Roof 1 chimney chimney DN 600 mm Lifting rings Ferrule 1 ladder support bar 1 taster tap 1 round autoclave door 1 partial drain valve 1 tap and level strip Bottom Flat bottom with box 1 total drain valve Dimensions Diameter: 2500 mm Height: 6500 mm Location: Sigean (11) Equipment sold loaded on truck: additional mandatory dismantling and loading fees apply to this lot. Auction-ID: A1-51122-236

48.8 hL – NEW – Temperature-controlled 304 stainless steel tank, sloping flat bottom, floating cap New material. Technical characteristics Model: SPAIPSER5000 Material: 304 stainless steel Total capacity: 4,880 litres Bottom: sloping flat, slope 4% Roof: floating cap Interior finish: bright annealing Exterior finish: brushed Roof 2 vacuum lifting rings 1 floating cap 316L stainless steel with complete pneumatic system Valve. Ferrule 1 jib crane 1 lifting winch 1 ladder support 1 rectangular door 420×530 mm at the bottom of the ferrule with external opening 1 partial drain with square flange 100×100, stainless steel ball valve 40 MÂCON, stainless steel stopper 1 tasting tap on DIN 15 tap 1 needle thermometer 1 complete stainless steel level with tap and stainless steel ruler (polycarbonate tube) 4 coil towers with 2.15 m² exchange surface on the ferrule 2 coil towers wit ...

Professional Roland VersaUV LEF-12 UV-LED flatbed printer for direct printing of various materials and objects. Suitable for plastic, acrylic, wood, leather, metal, phone cases, promotional items, displays and gift items. Equipped with CMYK + White + Gloss/Varnish, which also allows dark and transparent materials to be printed and allows gloss, texture and relief effects. Depending on the method, film and materials used, the printer can also be used for UV-DTF applications. Includes BOFA Base Unit LEF-12 extraction/filter unit and 1 extra print head. Specifications Brand / Model: Roland VersaUV LEF-12 Technology: UV-LED flatbed inkjet Print area: approx. 305 × 280 mm Max. object: approx. 335 × 310 × 100 mm Max. object weight: approx. 5 kg Resolution: up to 1440 dpi Colors: CMYK + White + Gloss/Varnish Ink: Roland ECO-UV Connection: Ethernet/LAN Dimensions: approx. 100 × 86 × 55 ...

302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2% ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 30,200 litres Material: stainless steel 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Thermoregulated Conical roof 1 eccentric chimney at the front Ø 200 mm 2 Stainless steel flags 1 thermometer 6 lifting rings Ferrule 1 oval door 310×420 mm 1 partial drain valve DN 65 1 tap for level probe Flat bottom inclined 2% with housing 1 total drain valve with plug Dimensions Diameter: 2800 mm Total height: 6000 mm Ferrule ...

220 hL – Lagouarde – Temperature-controlled 304 stainless steel tank with flat bottom and casing This LAGOUARDE temperature-controlled stainless steel storage tank with a capacity of 220 hl is designed for the storage of liquids in the wine and agri-food environment. Its vertical configuration, combined with a flat bottom with casing and its flag thermoregulation equipment, makes it a practical, robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical characteristics Vertical cylindrical tank Brand: LAGOUARDE Total capacity: 22,000 litres Material: stainless steel Thermoregulated Roof Eccentric chimney on the front with hatch Ferrule 1 rectangular door external opening 1 partial drain valve on square flange Thermoregulated: flag Flat bottom with housing 1 total drain valve on square flange Dimensions Diameter: 2500 mm ...

302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2% ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 30,200 litres Material: stainless steel 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Thermoregulated Conical roof 1 eccentric chimney at the front Ø 200 mm 2 Stainless steel flags 1 thermometer 6 lifting rings Ferrule 1 oval door 310×420 mm 1 partial drain valve DN 65 1 tap for level probe Flat bottom inclined 2% with housing 1 total drain valve with plug Dimensions Diameter: 2800 mm Total height: 6000 mm Ferrule ...

500 hL – Cidec – Flat-bottom fibreglass tank CIDEC vertical fibreglass tank, with a total capacity of 50,000 litres, designed for the storage of liquids in wine-growing, cider-making, agri-food or industrial environments. Thanks to its high-capacity design, its flat bottom with box and its stainless steel racking and emptying equipment, this tank allows functional operation for the storage and processing of liquids in outdoor or indoor vats. Technical characteristics Brand: CIDEC Total capacity: 50,000 litres Material: fibreglass Configuration: vertical cylindrical tank Roof Domed roof 1 chimney Shell 1 taster tap 1 tap and level strip 1 stainless steel partial drain valve 1 oval door Bottom Flat bottom with box 1 stainless steel total drain valve Dimensions Diameter: 3000 mm Height: 9000 mm Location: Bollène (84) Equipment sold loaded on truck: additional mandatory di ...

225 hL (91 + 134 hL) – Pierre Guerin – Stainless steel 304 shell compartmentalized tank with sloping flat bottom Technical characteristics Brand Pierre Guerin Capacity: 134 hl + 91 HL Total capacity: 22,500 liters Material: 304 L Interior finish: raw cold rolling Exterior finish: brushed Roof 1 central chimney with stainless steel hatch DN 500 mm with clamping studs 1 50 Mâcon tap on chimney, internally / externally threaded 2 lifting rings Ferrule gangway support 1 rectangular stainless steel door 410 x 530 mm with external opening with mud flap 1 partial drain valve with stainless steel ball DN 50 with decanter elbow 1 stainless steel taster 8 turns of shell circuit1 stainless steel ball drain valve DN 50 Roof 1 chimney off-centre at the front with stainless steel hatch DN 500 mm with clamping studs 1 tap 50 Mâcon on chimney, threaded inside / outside Ferrule 1 recta ...

500 hL – Cidec – Flat-bottom fibreglass tank CIDEC vertical fibreglass tank, with a total capacity of 50,000 litres, designed for the storage of liquids in wine-growing, cider-making, agri-food or industrial environments. Thanks to its high-capacity design, its flat bottom with box and its stainless steel racking and emptying equipment, this tank allows functional operation for the storage and processing of liquids in outdoor or indoor vats. Technical characteristics Brand: CIDEC Total capacity: 50,000 litres Material: fibreglass Configuration: vertical cylindrical tank Roof Domed roof 1 chimney Shell 1 taster tap 1 tap and level strip 1 stainless steel partial drain valve 1 oval door Bottom Flat bottom with box 1 stainless steel total drain valve Dimensions Diameter: 3000 mm Height: 9000 mm Location: Bollène (84) Equipment sold loaded on truck: additional mandatory di ...

360 hL – Vautier – Temperature-controlled 304 stainless steel tank with flat bottom inclined 22% on skirt This 360 hl capacity VAUTIER temperature-controlled storage tank in 304 stainless steel is designed for the storage of liquids in the wine and agri-food industry. Its vertical configuration on a skirt, combined with a 22% inclined bottom and its temperature-regulating equipment, makes it a robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical data Brand: VAUTIER Tank with sloping bottom on skirt Capacity: 36,000 litres Material: stainless steel 304 Tanks N°: 1; 2; 3 and 4 Roof Chimney chimney ø 600 Shell Rectangular door with external opening 800×600 with mud flap and 10 closing points 2 valves ø 50 1 valve ø 70 Dial thermometerLevel gauge Winding tubing ø 70 2 flat flags 4 regulation rings Temperature probe ...

302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2% ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 30,200 litres Material: stainless steel 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Thermoregulated Conical roof 1 eccentric chimney at the front Ø 200 mm 2 Stainless steel flags 1 thermometer 6 lifting rings Ferrule 1 oval door 310×420 mm 1 partial drain valve DN 65 1 tap for level probe Flat bottom inclined 2% with housing 1 total drain valve with plug Dimensions Diameter: 2800 mm Total height: 6000 mm Ferrule ...

138 hL – ETA – Temperature-controlled 304 stainless steel tank with a sloping flat bottom on a stainless steel base This 304L stainless steel temperature-controlled storage tank with a capacity of 138 hl is designed for the storage of liquids in the wine and food industry. Its configuration, combined with a sloping flat bottom on a stainless steel base, a brushed exterior finish and its thermoregulation system by internal coil radiator, makes it a robust second-hand solution that can be used immediately to complete a winery or increase an existing storage capacity. Technical characteristics Brand: ETA Material: 304L stainless steel Total capacity: 13,800 litres Temperature-controlled tank Interior finish: raw rolled, stripped and passivated Exterior finish: brushed, stripped and passivated Roof Drain socket with plug 1 chimney chimney chimney Shell 1 ladder support bar 1 tap  ...

150 hL – 304 stainless steel flat bottom tank with casing This 150 hL 304 stainless steel storage tank is designed for winemaking and liquid storage applications in the cellar. Its simple and robust design, combined with a roof with a chimney centred, a rectangular door with external opening, a flat bottom with a boilard and suitable racking equipment, makes it a reliable and immediately usable solution to complement an existing winery capacity. Technical characteristics Material: 304 stainless steel Total capacity: 15,000 litres Roof 2 lifting rings 1 chimney centred with hatch Ferrule 1 ladder support bar 1 door rung 1 rectangular door with external opening 1 taster tap Flat bottom with boilard 1 stainless steel total drain valve on square flange 1 sludge without cap Dimensions Diameter: 2800 mm Height: 4000 mm Location: Civray Equipment sold loaded on truck: additiona ...

48.8 hL – NEW – Temperature-controlled 304 stainless steel tank, sloping flat bottom, floating cap New material. Technical characteristics Model: SPAIPSER5000 Material: 304 stainless steel Total capacity: 4,880 litres Bottom: sloping flat, slope 4% Roof: floating cap Interior finish: bright annealing Exterior finish: brushed Roof 2 vacuum lifting rings 1 floating cap 316L stainless steel with complete pneumatic system Valve. Ferrule 1 jib crane 1 lifting winch 1 ladder support 1 rectangular door 420×530 mm at the bottom of the ferrule with external opening 1 partial drain with square flange 100×100, stainless steel ball valve 40 MÂCON, stainless steel stopper 1 tasting tap on DIN 15 tap 1 needle thermometer 1 complete stainless steel level with tap and stainless steel ruler (polycarbonate tube) 4 coil towers with 2.15 m² exchange surface on the ferrule 2 coil towers wit ...

165 hL – Chalvignac – 304 stainless steel tank flat bottom This CHALVIGNAC stainless steel tank with a capacity of 165 hL is designed for the storage of liquids. Its configuration, combined with a vertical cylindrical tank with a flat bottom, a total emptying with a decanter elbow and filtration grid, as well as a complete control and withdrawal equipment, makes it a robust second-hand solution that can be immediately used to supplement an existing storage capacity. Technical characteristics Brand: CHALVIGNAC Material: stainless steel Total capacity: 16,500 litres Roof 1 chimney centred with stainless steel hatch 1 ferrule footbridge support 1 ladder support 1 rectangular door flush with the bottom 1 tap and level strip 1 taster tap 1 winding column Bottom Flat bottom 1 total drain valve with decanter elbow and filtration grid Dimensions Diameter: 2600 mm Height: 3800 mm ...