fkm used for sale

Material: stainless steel Engine: 160 kW Content: 15000 ltr Weight: 11000 kg Length x Width x Height: 6300 mm x 2200 mm x 2500 mm Mechanism SDW (340kW) Flender Speed: 1500 / 63 More details on request. Very good condition. You can also get the entire system with all components you need.

x-travel: 1000 mm y-travel: 300 mm z-travel: 400 mm table-size: 1320 x 360 mm spindle taper ISO: 40 spindle turning speed range: 58 - 1800 U/min total power requirement: 4 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,1 x 2,1 x 1,95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Thank you for your interest in our machines, which we can offer you as follows: Manufacturer : Lödige GmbH Model : FKM 300 D Ploughshare Mixer electr. Values : 400V 50 Hz, 3Ph Drum capacity : 300 l Capacity : 100 – 210 litres Details : - Parts in contact with the product are made of V²A - Front-mounted 2 cleaning flaps with safety switch - Feed nozzle with safety switch - Emptying opening in the bottom with manually operated emptying flap in cylindrical nozzle - Centrifugal unit with ploughshare blades (normal blades) - Bearings & Seals New (incl. gearbox & engine) - All screws New - Sandblasted and then Newly painted We offer this machine for sale "in overhauled condition" with a 6 month warranty on new parts. from the Hess warehouse. Lichtenau; unpackaged

Batch horizontal mixer in standard steel version, lined inside with carbide, useful filling up to approx. 800 l.. Drive over 37 kW motor, Flender head gear and start-up clutch, equipped with 2 flanges for optional knife heads / choppers. Slingshot shaft with armoured Becker shovels (as good as new). Incl. basic frame for mixer, gearbox, fluid coupling and motor. Sandblasted and repainted.

Polygraph kama folding glue machine with 3 points format 104

Stainless steel batch mixer with a gross volume of 600 l. (max. usable capacity: approx. 400 l.), centrifugal unit equipped with ploughshares, drive via geared motor with 11.0 kW, outlet flap pneumatically operated, without control cabinet. In very good condition of wear.

Horizontal batch mixer with a gross volume of 6,800 l. (= usable filling: 1,700 l. to 5,100 l. max.). Including drive unit with 110 kW and motor frame. Centrifugal unit equipped with Becker blades, end wall equipped with sampling device, emptying pneumatically via long floor flap.

x-travel: 600 mm y-travel: 300 mm z-travel: 440 mm table-size: 1120 x 260 mm spindle taper ISO: 40 spindle turning speed range: 35 - 1600 U/min total power requirement: 2,2 kW weight of the machine ca.: 1,36 t dimensions of the machine ca.: 1,65 x 1,32 x 1,65 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mm throat: 360 mm bore stroke: 150 mm spindle turning speed range: 120 - 3000 U/min spindle taper: SK 40 : 650 mm : 320 mm vertical adjustment: 500 mm table surface area: 1000 x 300 mm connected load frequency: 400 V diameter of hob: max. 80 mm total power requirement: 2,2 kW weight of the machine ca.: 0,85 t dimensions of the machine ca.: 1,25 x 1.5 x 2,3 m New Model Industrial Drilling and Milling Machine with Manual Transmission and High Speed Range. The prism guide in the Z-axis ensures a high degree of precision even in the most difficult milling jobs. Domestic equipments: • automatic feed in X-axis • 3-axis digital display • motorized Z-axis • Feed in quill • Left-right-run high • tapping attachment • Gear head swiveling • Coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 25 mm throat: 185 mm bore stroke: 50 mm spindle taper: MK 3 spindle turning speed range: 50 - 2500 U/min : 178 mm : 480 mm table surface area: 700 x 180 mm connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 160 t dimensions of the machine ca.: 0,75 x 0,8 x 0,9 m domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 200 mm z-travel: 350 mm table-size: 700 x 200 mm spindle taper ISO: 40 turning speed range - horizontal: 150 - 1660 U/min turning speed range - vertical: 110 - 1230 U/min quill stroke: 120 mm spindle drive: 3,0 kW weight of the machine ca.: 1,15 t dimensions of the machine ca.: 1,31 x 1,38 x 1,65 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 300 mm z-travel: 350 mm table-size: 1120 x 260 mm spindle taper ISO: 40 spindle turning speed range: 67 - 2010 U/min quill stroke: 120 mm bore capacity in steel: 40 mm total power requirement: 2,2 kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: 1,58 x 1,45 x 2,15 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 130 mm spindle taper: SK 40 spindle turning speed range: 70 - 3200 U/min : 520 mm : 230 mm table surface area: 730 x 210 mm connected load frequency: 400 V total power requirement: 1,1/1,5 kW weight of the machine ca.: 0,32 t dimensions of the machine ca.: 1,1 x 0,9 x 1,15 m domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 130 mm spindle taper: SK 40 spindle turning speed range: 75 - 3200 U/min : 500 mm : 230 mm table surface area: 720 x 210 mm connected load frequency: 400 V diameter of hob: max. 80 mm total power requirement: 1,1 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,1 x 0,9 x 1,2 m domestic equipments • Digital display • Digital depth gauge for quill • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU347X802 MakeMorton LocationBarneveld CEcheck TypeFKM 3000 D-4MZ Main Features MaterialStainless steel Volume3000 Ltr. Motor37 KW Specified Features - Powder turbo mixer Lödige mixercheck Powder turbo mixercheck Capacity3000 Ltr. Trough sizesø 1110 x 2960 mm Inletø 250 Inspection hatch2x 540 x 400 mm Outletø 350 mm Motor37 kW,(400V, 1470 rpm) With variable speed drive115 rpm Speed mixing shaft127 rpm With lump breaker(4x) Motor4 kW, 400 V 2920 rpm Speed lumpbreaker3000 rpm MaterialStainless steel 1.4401 (316) General No.24262 Year of construction1999 Floorspace4,00 x 1,65 m Total height1,80 m Weight1900 kgPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchOther chemicalAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOther pharmaceuticsFood additivesSugarPowder turbo mixersAnimal feedOther feedBiopharmac ...

Batch mixer with a gross volume of 300 l. (max. usable filling: approx. 200 l.), part in contact with the product in stainless steel V4A, centrifuge equipped with ploughshares, drive via geared motor with 7.3 kW (pole-switchable for 2 speeds), equipped with a cutter head with 4.0 kW (speed approx. 3,000 rpm). Incl. push-button control cabinet and base; Outlet flap manually operated. All tools in very good wear condition.

General SKU347X806 MakeMorton LocationBarneveld CEcheck TypeFKM 3000 D-4MZ Main Features MaterialStainless steel Volume3000 Ltr. Motor30 KW Specified Features - Powder turbo mixer Lödige mixercheck Powder turbo mixercheck Capacity3000 Ltr. Trough sizesø 1110 x 2960 mm Inletø 250 Top connectionsø 350 mm Inspection hatch2x 540 x 400 mm Outletø 350 mm Motor30 kW, 380 V Speed mixing shaft115 rpm With lump breaker(4x) Motor4 kW Speed lumpbreaker3000 rpm MaterialStainless steel 1.4401 (316) General No.M24066 Year of construction1995 Floorspace4,00 x 1,65 m Total height1,80 m Weight1900 kgPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchOther chemicalAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOther pharmaceuticsFood additivesSugarPowder turbo mixersAnimal feedOther feedBiopharmaceuticalMinerals & inorganicMorton ...

General SKU321X549 LocationBarneveld MakeLödige TypeFKM 600 D Pressure Working pressure jacket0.5 Bar Main Features MaterialStainless steel Volume600 Ltr. Motor23 KW Specified Features - Powder turbo mixer Powder turbo mixercheck T-arms5x Capacity600 l. Trough sizesDia. 800x1200 mm InletDia. 250/350 mm Inspection hatch2x 460x380 mm Outlet250x180 mm With jacket37 l. Max. temperature110°C Glands air purgedcheck Motor15 kW, 380 volt, 1460 rpm Speed mixing shaft1460 rpm With lump breaker2x Motor2x 4 kW, 220/380 volt, 2893 rpm Speed lumpbreaker2893 rpm MaterialStainless steel 1.4552 With jacketcheck General No.10637 Year of construction1983 Mounted on framecheck Floorspace2,40x1,20 m Total height2,20 mPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchOther chemicalAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOth ...

General SKU403W1256 LocationBarneveld MakeLödige TypeFKM 1600 D Main Features MaterialStainless steel Volume1600 Ltr. Motor22 KW Specified Features - Powder turbo mixer Lödige mixercheck Capacity1600 ltr. Useful capacity400-1200 ltr. Trough sizesDia. 1100x1600 mm Top connectionsDia 250 and 450 mm Inspection hatch2x OutletDia. 330 mm With adjustable packing glandscheck Motor22kW, 380V,1465 rpm Speed mixing shaft119 rpm MaterialStainless steel 1.4306 (304L) General No.9640 Year of construction1980 Floorspace,0x1,6 m Total height1,4mPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchOther chemicalAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOther pharmaceuticsFood additivesSugarPowder turbo mixersAnimal feedOther feedBiopharmaceuticalMinerals & inorganicLoedigeIndustries > Food & Feed > Powdered foodsIndustries > Pharma ...

Solenoid valve, disc valve, flap valve, electromagnetic valve, magnetic valve, solenoid gas valve, gas solenoid valve -Manufacturer: Bürkert, solenoid valve unused -Type: 0313 D 2.0 FKM MS -ID No.: 00077035 -Voltage: 82-148 V -Number: 100 x valve available -Price per piece -Dimensions: 78/33/H51 mm -Weight: 0.2 kg/piece

Solenoid valve, disc valve, flap valve, electromagnetic valve, solenoid valve, solenoid gas valve, gas solenoid valve -Manufacturer: Bürkert, solenoid valve unused -Type: 0312 C 1.8 FKM MS -ID No.: 00088840 -Voltage: 18-33 V -Number: 3x valve available -Price: per piece -Dimensions: 70/32/H51 mm -Weight: 0.3 kg/piece

General SKU296W564 MakeLoedige LocationBarneveld TypeFKM 600D2Z Main Features MaterialStainless steel Volume600 Ltr. Motor30 KW Specified Features - Powder turbo mixer Powder turbo mixercheck T-arms5 Capacity730 l Useful capacity600 l Trough sizesDia. 780 x 1200 mm Top connectionsDia. 250/300 mm Inspection hatch(2x) 450x380 mm Outlet240 x 180 mm Glands air purgedcheck Motor30 kW, 380/660 volt, 1460 rpm Speed mixing shaft134 rpm With lump breaker2x Motor5,5 kW, 220/380 volt Speed lumpbreaker2910 rpm MaterialStainless steel 1.4301 (304) With jacketcheck General No.5080 Year of construction1969 Mounted on framecheck Floorspace3,3 x 1,5 m Total height2,5 m Weight2260 kgPowdered foodsGeneric medicinesTea, herbs & coffeeStarchOther chemicalSpicesCatalysts & fillersFeed additivesOther pharmaceuticsCosmeticsFood additivesSugarPowder turbo mixersAnimal feedOther f ...

A horizontal ploughshare mixer Gebrüder Lödige is available. Total volume: 300l, usable volume: 225l, mixing chamber diameter: 640mm, mixing chamber length: 1000mm, inlet opening diameter: 250mm, ground clearance: 800mm, machine dimensions X/Y/Z: approx. 2500mm/1500mm/2200mm, weight: approx. 500kg. An on-site inspection is possible. Expected to be available 2026.

General SKU424U1351 MakeMorton LocationBarneveld TypeFKM 1600 Pressure Working pressure jacket1.5 Bar Main Features MaterialStainless steel Volume1600 Ltr. Motor15 KW Specified Features - Powder turbo mixer Powder turbo mixercheck T-armscheck Capacity1600 ltr. Trough sizes1100x1700 mm InletDia. 200 and 80 mm Inspection hatchcheck Outlet240x180 mm With jacketcheck Max. temperature112°C With adjustable packing glandscheck Motor15 kW, 415Volt, 1460rpm Speed mixing shaft155rpm With lump breaker3x Motor4kW, 400/690Volt, 2870rpm (3x) Speed lumpbreaker2870 rpm MaterialStainless steel 1.4306 (304L), Stainless steel 1.4408 With jacketcheck General No.M 23556 Year of construction7/1987 Floorspace3,25x1,60 m Total height1,50 m Weight2590 kg Technical specs Extra informationAllowable temp 112°CPowdered foodsGeneric medicinesTea, herbs & coffeeStarchOther chemic ...

USED LÖDIGE FKM 2000D STAINLESS STEEL 2.000 LITRES BLENDER REF#: C5725 Lodige FKM2000D mixer with a total volume of 2000 liters manufactured in 316 stainless steel. Two inspection doors with a 55 kw geared motor completely reconditioned. General characteristics: Manufactured by LODIGE Model FKM 2000D Material Stainless steel 316 Year built 1973 Weight 3700 kg (2060 kg + 1640 kg motor and reducer) Technical characteristics: Capacity 2,000 L (800-1,400 L useful) Motor characteristics: Manufactured by SCHORCH Voltage 400/690 V Current 94/55 A Power 55 kW Frequency 50 Hz cos(fi) 0.89 Rotational speed 2960 rpm Reducer characteristics: Manufactured by ELENDER Model SZBW 250 Ratio 0.04 Rotational speed 120 rpm

General SKU104W505 MakeMorton Machines TypeFKM-900D No.M24052 Year of construction12/´94 LocationBarneveld Pressure Working pressure jacket5.5 Bar Main Features MaterialStainless steel Volume900 Ltr. Motor75 KW Specified Features - Powder turbo mixer Powder turbo mixer(1x) Capacity900 Ltr Trough sizesdia. 790x1840mm Top connectionsdia. 150mm + dia. 250mm + dia. 345mm Inspection hatch540x400mm (1x) Outlet160x120mm (2x) + dia. 100mm With jacketcheck Max. temperature162 Degr. C. With adjustable packing glandscheck Motor75,0 KW, 380 Volt (Ex) Speed mixing shaft± 115 Rpm MaterialStainless steel 1.4401 (316) With jacketcheck General ATEX designedcheck Extra Specifications-- RECONDITIONED --Powdered foodsGeneric medicinesTea, herbs & coffeeStarchReconditionedOther chemicalSpicesCatalysts & fillersFeed additivesDiscountOther pharmaceuticsCosmeticsFood additivesSug ...

General SKU213S047 LocationBarneveld MakeLoedige (D) TypeFKM1200D.3Z Main Features MaterialMild steel Volume1200 Ltr. Motor24 KW Specified Features - Powder turbo mixer Lödige mixercheck Capacity1200 ltr. Useful capacity400-850 ltr. Trough sizesdia. 950x1700mm Inlet330x330mm (1x) dia 240mm (1x) Inspection hatch(2x) 540x380mm Outlet240x180mm Motor24 kW (380 V, 1475 rpm (Ex)) With lump breaker(2x) Motor4,6 kW 380 Volt Speed lumpbreaker2930 rpm MaterialMild steel With jacketcheck General No.6080 Year of construction1971 Floorspace3,5x1,8 M Total height1,4 M Weight2200 KgPowdered foodsGeneric medicinesTea, herbs & coffeeStarchOther chemicalSpicesCatalysts & fillersFeed additivesOther pharmaceuticsCosmeticsFood additivesSugarPowder turbo mixersAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicLoedigeIndustries > Food & Feed > ...

General SKU257M257 MakeLOEDIGE TypeFKM 600D No.14787 Year of construction2001 Mounted on framecheck Pressure Working pressure5 Bar Main Features MaterialStainless steel Volume600 Ltr. Motor18.5 KW Specified Features - Powder turbo mixer Lödige mixercheck Capacity600 Ltr Useful capacity200 - 420 Ltr Trough sizesDIA. 800 x 1250mm Top connections2x DIA. 340mm Inspection hatch2x 450 x 380mm OutletDIA. 200mm With jacketcheck Max. temperature100 Glands air purgedcheck Motor18,5 KW, 380/660 Volt Speed mixing shaft187 Rpm MaterialStainless steel 1.4541 (321) With jacketcheck General LocationBarneveld Floorspace3,7 x 1,8 M Total height1,9 M Weight2150 KGPowdered foodsGeneric medicinesTea, herbs & coffeeStarchOther chemicalSpicesCatalysts & fillersFeed additivesOther pharmaceuticsCosmeticsFood additivesSugarPowder turbo mixersAnimal feedOther feedConfectionerySoli ...

General SKU371S889 MakeLoedige (D) TypeFKM 130D 1Z No.7356 Year of construction1974 Mounted on framecheck Pressure Working pressure jacket5 Bar Main Features MaterialStainless steel Volume130 Ltr. Motor4 KW Specified Features - Powder turbo mixer Powder turbo mixercheck Capacity130 ltr Trough sizesdia.500x670mm Inletdia. 250mm Inspection hatch370x310mm Outlet160x120mm With jacket(12 ltr) Max. temperature158 degr. C With adjustable packing glandscheck Motormanufacturer plate is missing (± 4 kW) With lump breakercheck Motor4 kW 220/380 Volt Speed lumpbreaker2870 rpm MaterialStainless steel 1.4541 (321) With jacketcheck General LocationBarneveld With switchgear(as is) Floorspace2,1x1,2 M Total height2,5 M Weight750 KgPowdered foodsGeneric medicinesTea, herbs & coffeeStarchOther chemicalSpicesCatalysts & fillersFeed additivesOther pharmaceuticsCosmeticsFoo ...

General SKU328S599 MakeLoedige TypeFKM-1200 D No.10.181 Year of construction1982 LocationBarneveld Main Features MaterialStainless steel Volume1200 Ltr. Motor45 KW Specified Features - Powder turbo mixer Lödige mixercheck T-armscheck Capacity1200 l. Useful capacity960 l. Trough sizesø 950x1700 mm Inletø 300 mm, ø 240 mm Inspection hatch620 x 380 mm (2x) Outlet240 x 180 mm Motor45 kW 380—415/660—690 Volt Speed mixing shaft1470-125 (380—415 V) / 1770-151 (660—690 V) MaterialStainless steel General With switchgear(as is) Sizes switchgear2,9 x 1 x 2 m Floorspace3 x 1,5 m Total height1,5 m Weight3660 kgPowdered foodsGeneric medicinesTea, herbs & coffeeStarchOther chemicalSpicesCatalysts & fillersFeed additivesOther pharmaceuticsCosmeticsFood additivesSugarPowder turbo mixersAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals &  ...

General SKU338S621 LocationBarneveld MakeMorton Main Features MaterialStainless steel Volume600 Ltr. Motor15 KW Specified Features - Powder turbo mixer Powder turbo mixercheck Capacity600 ltr Useful capacity400 ltr Trough sizesdia. 800x1255mm Inletdia. 250mm, dia. 350mm Inspection hatch450x380mm (2x) Outlet240x200mm With adjustable packing glandscheck Motor15 kW 660-690 Volt MaterialStainless steel 1.4301 (304) General TypeFKM 600 Year of constructionunknown, manufacturer plate is missing Floorspace2,3x1,5 M Total height1,4 M Weight1200 Kg Extra Specifications:Easy clean execution:Powdered foodsGeneric medicinesTea, herbs & coffeeStarchOther chemicalSpicesCatalysts & fillersFeed additivesOther pharmaceuticsCosmeticsFood additivesSugarPowder turbo mixersAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicMortonIndustries > Food ...

General SKU098N558 MakeLödige TypeFKM-8000D No.4546 (vessel no. 404) Year of construction1968 LocationBarneveld Pressure Working pressure2 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume8000 Ltr. Motor33 KW Specified Features - Powder turbo mixer Paddle dryer(1x) Capacity8000 l Trough sizesdia. 1580 x 4000 mm Inletdia. 500mm + dia. 400mm + dia. 200mm Outletdia. 150 mm With jacket(550 l) Max. temperature215°C Motor33 kW, 500 Volt Speed mixing shaft± 23 rpm With jacketcheck Powder turbo mixers MaterialStainless steel 1.4541 (321) General Floorspace6,8 x 1,9 m Total height2,6 m Extra SpecificationsTop connections dia. 500 mm + dia. 400 mm + dia. 200 mmPowdered foodsGeneric medicinesOintmentsFine chemicalsStarchOther chemicalBiotechnologyAgrochemicalsCatalysts & fillersFeed additivesDiscountOther pharmaceuticsCosmeticsSugarPowder turbo  ...

Stainless steel batch mixer with a gross volume of 600 l. (max. usable filling: approx. 400 l.). Centrifugal unit equipped with ploughshares, drive via motor, starting clutch and intermediate gearbox, outlet flap pneumatically operated. Equipped with 2 flanges for mounting cutter heads/choppers. In very good condition of wear, bead-blasted and repainted.

ST-PARK / Sweeper FKM 900 KA sweeper Specifications: Model: ST-PARK / Sweeper Type: FKM 900 KA STIGA/GGP article number: 13-3910-11 Working width: 90 cm Brush diameter: 320 mm Drive: belt drive Weight according to rating plate: 87 kg Features: Rotating sweeping brush Particularities: Suitable for sweeping up leaves, sand, soil and fresh snow from hard surfaces. Auction-ID: A1-47386-315

Drilling/milling machine with: • Digital display • Digital depth gauge for quills • Adjustable guides through wedge strips • Large 12-step speed range from 75 - 3200 rpm • Extremely smooth running due to hardened and ground gears running in oil bath • Right-counterclockwise rotation • Prism guides in all axes • Gear head can be swivelled 90° • Chip protection with safety circuit Machine base optional. Not included. Drilling capacity in steel 40 mm Projection 290 mm Drilling stroke 130 mm Spindle holder SK 40 Spindle speeds 75 - 3200 rpm Table adjustment transverse 500 mm Table adjustment longitudinal 230 mm Table clamping area 720 x 210 mm Connection voltage 400 V Milling cutter diameter max. 80 mm Total power requirement 1.1 kW Machine weight approx. 0.35 t Dimensions approx. 1.1 x 0.9 x 1.2 m Condition: never used / new (5) Auction-ID:  ...

Facilities Two-stage gearbox via flat belt (no longer plastic gears) Infinitely variable speed range Quill fine feed via switchable handwheel Digital quill depth display Right-left rotation Robust dovetail guides with adjustable wedge strips Bellows covers for the guideways Adjustable control panel Chip protection with safety circuit Machine base optional. Drilling capacity in steel 25 mm Projection 185 mm Drilling stroke 50 mm Spindle mount MK 3 Spindle speeds: 50 - 2500 rpm Table adjustment transverse 178 mm Table adjustment longitudinal 480 mm Table clamping area 700 x 180 mm Connection voltage 230 V Total power requirement 0.75 kW Machine weight approx. 160 kg Space requirement approx. 0.75 x 0.8 x 0.9 m Condition: never used / new (5) Auction-ID: A7-49782-495