fk used for sale

Material: stainless steel Engine: 160 kW Content: 15000 ltr Weight: 11000 kg Length x Width x Height: 6300 mm x 2200 mm x 2500 mm Mechanism SDW (340kW) Flender Speed: 1500 / 63 More details on request. Very good condition. You can also get the entire system with all components you need.

Forte cold circular sawing machine with roll feed. Outfeed table and bundle magazine doesn't exist.

Machine Type: Water Circulation Cooling Unit Make Jäckle Type FKG 3 Connection for the welding machine 230 V Schuko coupling Connection voltage 1 x 230 Volt Power connection 230 V Schuko plug Water pressure 3 bar at 2.3 ltr./min. Cooling capacity 1,000 W Burner connection 2 quick-release couplings Water tank 5.4 ltr. Content Dimensions L x W x H 1,080 x 520 x 830 mm Weight 44 kg Age approx. 10 years Condition workshop tested incl. UVV protocol Warranty: 6 months from the date of delivery Original price €1,350.00 + VAT Your price €590.00 + VAT ___________________________________________________________ The machine is located in the Wilhelm Merkle Schweisstechnik GmbH Anton-Böck-Straße 31 81249 Munich The contact person is Mr. Manuel Maier. Of course, we will ship the machine to you for 60,- € by freight forwarder thro ...

Outlet/inlet NW 65 with stainless steel cover

Batch horizontal mixer in standard steel version, lined inside with carbide, useful filling up to approx. 800 l.. Drive over 37 kW motor, Flender head gear and start-up clutch, equipped with 2 flanges for optional knife heads / choppers. Slingshot shaft with armoured Becker shovels (as good as new). Incl. basic frame for mixer, gearbox, fluid coupling and motor. Sandblasted and repainted.

Used Grasso FKS PP 450/S water cooled chiller on Ammonia (R717). Complete with 1 Grasso HR-H36S-28 screw compressor, 2EC IE4-0DP-250M2 electric motor - 50 Hz - 110 kW - 2970 RPM, brazed heat exchanger as evaporator, brazed heat exchanger as condenser, Grasso oil separator with a volume of 275 liter, oil cooler, oil pump and a control cabinet with a Siemens Simatic HMI controller. Capacity based on a cold water inlet/outlet of 12°C/6°C and a cooling water temperatures of 27°C/32°C. Specifications: Brand: Grasso Type: FKS PP 450/S Product type: Water cooled chiller Capacity kW: 445,0 (cold water inlet/outlet of 12°C/6°C and cooling water temperatures of 27°C/32°C) Capacity tons: 126,5 (cold water inlet/outlet of 12°C/6°C and cooling water temperatures of 27°C/32°C) Refrigerant: R717 Weight in kg: 5200 Sizes: 3400x1900x2400 mm (LxWxH) Compressors: Grasso HMR-H36S-28  ...

FKS 250-1300 Circular sawing machines Max blade D.: 254 mm Be hem length 1250 mm RIP fence cutting width 610 mm The length width 845 mm Blade tilt 90 ° /-45 ° Table dimensions (L x W) 650 x 350 mm Table height 835 mm Blade rotation speed 4000 1/min Engine: 1, 5kW 230V Dust nozzle D.: 100 mm / 30 mm Weight: 142kg G & PIECES 5902030

Thank you for your interest in our machines, which we can offer you as follows: Manufacturer : Lödige GmbH Model : FKM 300 D Ploughshare Mixer electr. Values : 400V 50 Hz, 3Ph Drum capacity : 300 l Capacity : 100 – 210 litres Details : - Parts in contact with the product are made of V²A - Front-mounted 2 cleaning flaps with safety switch - Feed nozzle with safety switch - Emptying opening in the bottom with manually operated emptying flap in cylindrical nozzle - Centrifugal unit with ploughshare blades (normal blades) - Bearings & Seals New (incl. gearbox & engine) - All screws New - Sandblasted and then Newly painted We offer this machine for sale "in overhauled condition" with a 6 month warranty on new parts. from the Hess warehouse. Lichtenau; unpackaged

Three-phase motor, electric motor -Power: 1.9 kW -Speed: 2800 rpm -Shaft: Ø 18 x18 mm -Construction: B14 -Protection class: IP54 -Dimensions: 355/115/H150 mm -Weight: 15 kg

We can offer you 5 x Barmag FK6-1000V texturizing machines,manufactured in 2019,240 spindles,with spandex(lycra) device,still working,good maintenance. We machinery dealer of Polymwerization,POY,FDY,DTY,Staple,Nonwoven amd spare parts. We have many brands and models machines, tell me what you need seriously!

x-travel: 1000 mm y-travel: 300 mm z-travel: 400 mm table-size: 1320 x 360 mm spindle taper ISO: 40 spindle turning speed range: 58 - 1800 U/min total power requirement: 4 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,1 x 2,1 x 1,95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-phase motor, electric motor -Transfer: in the current condition as seen -Slight damage: on the fan housing -Power: 1.9 kW -Speed: 2800 rpm -Shaft: Ø 18 x18 mm -Construction: B5 -Protection class: IP54 -Dimensions: 360/140/H150 mm -Weight: 16.7 kg

Electric motor, three-phase motor -Manufacturer: VEM, electric motor type EAK 80.1/2-FK14 -Power: 0.4 kW -Speed: 2910 rpm -Shaft: Ø 19 mm -Construction: B3 -Number: 3x motor available -Price: per piece -Dimensions: 300/180/H210 mm -Weight: 9.5 kg/pc.

MAKSYMALNA ŚREDNICA 320 MAKSYMALNY MODUŁ 6

- workpiece diameter d680 - max workpiece length 3400 mm - max working lengths 2600 mm - with discs (d1100 mm) - required electric capacity 60 kW/h - under power, in use

We can offer you 4x Barmag FK6-1000V texturing machines, manufacture year 2014, 288 spindles, pneumatic yarn pusher, PU discs,airjet, unitens. Very good condition, price $215000/set FOB China.

We have 2 Barmag FK6-1000V texturing machines, double friction unit, manufactured in 2014, 2x240 spindles. individual morter friction units, pneumatic yarn pusher, double W2 roller, Barmag unitens, A,B side individualm control, very good machines. price $300000/set FOB China. We also have 1 Yuejian YJ-1000 double friction texturing machine available for sale, manufactured in 2018, 2x 288 spindles, double W2 roller, PU disc, airjet, A,B side individual control, shaft drive, very good condition. price $200000 FOB China

Polygraph kama folding glue machine with 3 points format 104

FKS 315-1500E Sliding table saw Trimming length 1220mm Saw Blade Diameter 315mm Cutting height 100/75mm Cutting width with stop 940mm Saw blade inclination 0-45° Suction nozzle diameter 38/100mm Motor 2,4kW 400V Weight approx. 210kg Work table grey cast iron Saw Blade Heights & Swivel Handwheel G&STÜ-5900315

Used Liebherr FKUv 1660 Premium gastro beverage refrigerator with convection cooling - Maximum cooling capacity in the smallest of spaces. If you buy two or more devices, we offer a 5% discount. When you choose Liebherr, you are investing in longevity. This beverage refrigerator is indispensable in restaurants, hotels or offices. The housing and door are made of stainless steel and are therefore easy to clean and corrosion-resistant. The recirculation system ensures even distribution of cold throughout the interior. This means that even freshly stored bottles quickly reach the desired drinking temperature. Technical data: Outer dimensions: H 83.0 cm | W 60 cm | D 61.5 cm Gross capacity: 41.4 l Net capacity: 130 l 220-240 V - 50 Hz Temperature range +1 °C to +15 °C Material housing/door: stainless steel Cooling system: Convection Undertable model Year of construct ...

Weibert FKK 315-2000E Sliding table saw Trimming length 2000 mm Saw blade diameter 315 mm Cutting height 100/80mm Cutting width with stop 1220 mm Saw blade inclination 0-45° Suction nozzle diameter 38/100mm Motor 3 kW 400 V Weight approx. 260 kg Work table grey cast iron Saw Blade Heights & Swivel Handwheel G&STÜ-5900317

Shaking table FKS JL-350 Paper size min. 125 x 176 mm Paper size max. 320 x 450 mm Art.Nr. PS2331 (L923)

USED LÖDIGE FKM 2000D STAINLESS STEEL 2.000 LITRES BLENDER REF#: C5725 Lodige FKM2000D mixer with a total volume of 2000 liters manufactured in 316 stainless steel. Two inspection doors with a 55 kw geared motor completely reconditioned. General characteristics: Manufactured by LODIGE Model FKM 2000D Material Stainless steel 316 Year built 1973 Weight 3700 kg (2060 kg + 1640 kg motor and reducer) Technical characteristics: Capacity 2,000 L (800-1,400 L useful) Motor characteristics: Manufactured by SCHORCH Voltage 400/690 V Current 94/55 A Power 55 kW Frequency 50 Hz cos(fi) 0.89 Rotational speed 2960 rpm Reducer characteristics: Manufactured by ELENDER Model SZBW 250 Ratio 0.04 Rotational speed 120 rpm

9 SETS AVAILABLE: 1- BARMAG FK6-1000 M TYPE MULTİ (M6) YEAR 2000,TWIN MACHINE,DOUBLE DECK,W1.1,LYCRA,216 SPINDLES 2- BARMAG FK6-1000 V TYPE (V4) YEAR 2002,LYCRA,WITH INVERTER,240 SPINDLES 3- BARMAG FK6-1000 V TYPE (V5) YEAR 2002,WITH INVERTER,240 SPINDLES 4- BARMAG FK6-1000 V TYPE (V6) YEAR 2003,LYCRA,WITH INVERTER, 240 SPINDLES 5- BARMAG FK6-1000 V TYPE (V7) YEAR 2003,LYCRA,WITH INVERTER, 240 SPINDLES 6- BARMAG FK6-1000 V TYPE (V8) YEAR 2003,LYCRA,WITH INVERTER,240 SPINDLES 7- BARMAG FK6-1000 V TYPE(V9) YEAR 2003,LYCRA,WITH INVERTER,240 SPINDLES 8- BARMAG FK6-1000 V TYPE(V10) YEAR 2005,LYCRA,WITH INVERTER,240 SPINDLES 9- BARMAG FK6-1000 V TYPE (V11) YEAR 2005,LYCRA,WITH INVERTER,240 SPINDLES

Manufacturer: Homag, Type: FKR 78/C/A/S3, Monting of the machine: zerspanerteil zum Einkürzen, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 10-40, Min-max feed m/min: ca.18, Infeed table: yes, Premilling: yes, Fine milling: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius scraper: yes, Flat scraper: yes, Bonding part EVA: yes, Work piece refeeding: Bargstedt, Roller/belt: Riemen, Compressed air bar: 6, Return type: Bargstedt TFU,

Key data: 45 °, 3200 mm, 1450 mm

Saw blade tilt and height adjustment motorized and with digital display Max. cutting height 200mm Scoring device with separate drive motor Main saw blade with belt drive and speeds 2800/3665/4800 min ̄¹ High dead weight ensures vibration-free running Large boom table with material roller Rip fence with round bar guide and digital position display Extendable aluminium longitudinal stop with two folding stops 7.5 kW main motor mounted on robust cast iron frame Four-bearing sliding carriage with double trolley made of anodised aluminium with high torsional rigidity Multiple locking on the sliding table Standard with table extension and table extension made of sheet steel Large pendulum protection hood can be easily swivelled up with the help of a gas pressure spring Saw blade clamping via tool-free Rapid system Cutting width with rip fence 1450 mm Max. cut-to-length width ...

x-travel: 600 mm y-travel: 300 mm z-travel: 440 mm table-size: 1120 x 260 mm spindle taper ISO: 40 spindle turning speed range: 35 - 1600 U/min total power requirement: 2,2 kW weight of the machine ca.: 1,36 t dimensions of the machine ca.: 1,65 x 1,32 x 1,65 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stainless steel batch mixer with a gross volume of 600 l. (max. usable capacity: approx. 400 l.), centrifugal unit equipped with ploughshares, drive via geared motor with 11.0 kW, outlet flap pneumatically operated, without control cabinet. In very good condition of wear.

bore capacity in steel (diameter): 50 mm throat: 360 mm bore stroke: 150 mm spindle turning speed range: 120 - 3000 U/min spindle taper: SK 40 : 650 mm : 320 mm vertical adjustment: 500 mm table surface area: 1000 x 300 mm connected load frequency: 400 V diameter of hob: max. 80 mm total power requirement: 2,2 kW weight of the machine ca.: 0,85 t dimensions of the machine ca.: 1,25 x 1.5 x 2,3 m New Model Industrial Drilling and Milling Machine with Manual Transmission and High Speed Range. The prism guide in the Z-axis ensures a high degree of precision even in the most difficult milling jobs. Domestic equipments: • automatic feed in X-axis • 3-axis digital display • motorized Z-axis • Feed in quill • Left-right-run high • tapping attachment • Gear head swiveling • Coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Horizontal batch mixer with a gross volume of 6,800 l. (= usable filling: 1,700 l. to 5,100 l. max.). Including drive unit with 110 kW and motor frame. Centrifugal unit equipped with Becker blades, end wall equipped with sampling device, emptying pneumatically via long floor flap.

bore capacity in steel (diameter): 25 mm throat: 185 mm bore stroke: 50 mm spindle taper: MK 3 spindle turning speed range: 50 - 2500 U/min : 178 mm : 480 mm table surface area: 700 x 180 mm connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 160 t dimensions of the machine ca.: 0,75 x 0,8 x 0,9 m domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 200 mm z-travel: 350 mm table-size: 700 x 200 mm spindle taper ISO: 40 turning speed range - horizontal: 150 - 1660 U/min turning speed range - vertical: 110 - 1230 U/min quill stroke: 120 mm spindle drive: 3,0 kW weight of the machine ca.: 1,15 t dimensions of the machine ca.: 1,31 x 1,38 x 1,65 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 300 mm z-travel: 350 mm table-size: 1120 x 260 mm spindle taper ISO: 40 spindle turning speed range: 67 - 2010 U/min quill stroke: 120 mm bore capacity in steel: 40 mm total power requirement: 2,2 kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: 1,58 x 1,45 x 2,15 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 130 mm spindle taper: SK 40 spindle turning speed range: 70 - 3200 U/min : 520 mm : 230 mm table surface area: 730 x 210 mm connected load frequency: 400 V total power requirement: 1,1/1,5 kW weight of the machine ca.: 0,32 t dimensions of the machine ca.: 1,1 x 0,9 x 1,15 m domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 130 mm spindle taper: SK 40 spindle turning speed range: 75 - 3200 U/min : 500 mm : 230 mm table surface area: 720 x 210 mm connected load frequency: 400 V diameter of hob: max. 80 mm total power requirement: 1,1 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,1 x 0,9 x 1,2 m domestic equipments • Digital display • Digital depth gauge for quill • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Faltschachtelklebemaschine / Folder Gluer Bernhardt FKB 700 Baujahr/ Year 2010 - Serial-No. 300310/86/FKB/700 Produktionsmöglichkeiten Längsnaht, 2 und 3-Punkt Grammatur 200 - 600 g/m2, E-Welle Materialien festes Papier ab 200 g/m2, Karton Plastik / Materials: strong paper from 200 g/m2, cardboard plastic Format offener Zuschnitt 500 x 700mm Luftanschluss benötigt / Air required min. 6bar Maschinengeschwindigkeit / Machine Speed max. 400 m/min. Die FKB 700 ist eine multifunktionale Faltklebemaschine für das Falten und Kleben von: Mappen, CD-Hüllen, DigiPacks und Faltschachteln. The FKB 700 is a multifunctional folding and gluing machine for folding and gluing: Folders, CD cases, DigiPacks and folding boxes.

Size: 440 x 310 mm Equipments: Feeder Feeder Mode: Flat pile feeder Max. pile height: 740 mm Folding Units 1st unit Type: AFC-566 FKT Pockets: 6 Pocket Type: Combi folding plates Pocket Configuration: manual Rollers Configuration: manual Roller condition: used condition Working width max: 558 mm Fold length max: 850 mm Cross fold unit with 1x knife Noise Protection Hood Touch Screen Control Delivery Delivery mode: PST-40 Type: Press delivery Year: 2010 Serial number: 360003 Working width max: 440 mm Technical Details Sheet size max: 440 x 310 mm Sheet size min: 60 x 64 mm Infeed height min: 280 mm Mechanical speed max: 240 m/min Pressing force: 20,000 N Built-in controller Technical details: Sheet size max: 558 x 850 mm Sheet size min: 128 x 148 mm Max. mechanical speed: 240 m/min Max. mechanical speed (cycles): 30,000 cycles/h

1 Clamp Binder, Glue Milling device, Cover Station

Cito Pac suppository filling line Filling, cooling, and sealing machine for suppositories in preformed plastic packages. Revision made in 2023 • two filling points • filling machine SFD10CP • dosage per filling point: from 0.5 to 3.5ml • cooling tunnel: KTE-10 CP • cooling path: 25 m (approx) • sealing machine: BST-10 CP • production capacity: up to 10,500 suppositories/hour (approx)

General SKU312T743 MakeBühler LocationBarneveld TypeFKK-900-A Main Features MaterialStainless steel Volume20 Ltr. Motor90 KW Specified Features - Sand mill Horizontal sand millcheck Capacity20 Ltr. Inletdia. 37 mm Outletdia. 37 mm Motor90 kW MaterialStainless steel General No.10 376 559 Year of construction2004 With switchcheck With switchgear(as is) Floorspace2,3x2 m Total height2,6 m Weight4100 kg (control cabinet 350 kg, pallet with loose parts 200 kg) Extra SpecificationsCooling water usage at 3 bar: 4.5 m³/hControl air pressure: 6–10barProduct flow rate: 60–1200 Ltr./hGrinding media Ø: 1,6-2,5 mm (steel process chamber)Paints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarSand millsConfectioneryDyes & pigmentsMinerals & inorganicBühlerIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries ...

Perfect binder FKS KB-2000; Serial No. 00977708041843, Hot Melt, 1 Clamp, Material Detection Sensors Automatic envelope detection, automatic envelope clamp, spine milling, undercarriage, in good condition, available now Technical data: Maximum format: 320 x 310 mm Back thickness: 60 mm Output: approx. 320 books/hour Weight: 186 kg 230V power supply

Batch mixer with a gross volume of 300 l. (max. usable filling: approx. 200 l.), part in contact with the product in stainless steel V4A, centrifuge equipped with ploughshares, drive via geared motor with 7.3 kW (pole-switchable for 2 speeds), equipped with a cutter head with 4.0 kW (speed approx. 3,000 rpm). Incl. push-button control cabinet and base; Outlet flap manually operated. All tools in very good wear condition.

Circular saw milling machine Bernardo FK2, good condition, 2.2 kW, 450 kgPrices subject to change, errors, printing and typesetting errors excepted

FKS Fold Master creasing machine; SN 1019 05, Stacker feeder, counter, delivery, 4 creasing tools, computer control

Peeling machine for spelt, oats, sunflowers Built in 2020, only 3 years in operation Motor power 5.5 kW with riser for tray separation Control cabinet

General SKU347X802 MakeMorton TypeFKM 3000 D-4MZ No.24262 Year of construction1999 LocationBarneveld Main Features MaterialStainless steel Volume3000 Ltr. Motor37 KW Specified Features - Powder turbo mixer Lödige mixercheck Powder turbo mixercheck Capacity3000 Ltr. Trough sizesø 1110 x 2960 mm Inletø 250 Inspection hatch2x 540 x 400 mm Outletø 350 mm Motor37 kW,(400V, 1470 rpm) With variable speed drive115 rpm Speed mixing shaft127 rpm With lump breaker(4x) Motor4 kW, 400 V 2920 rpm Speed lumpbreaker3000 rpm MaterialStainless steel 1.4401 (316) General Floorspace4,00 x 1,65 m Total height1,80 m Weight1900 kg CEcheckPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchOther chemicalAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOther pharmaceuticsFood additivesSugarAnimal feedOther feedPowder turbo mixersBiopharmac ...