fire engine used for sale

: neu : Bulgarien : 114970 € : 2172.93 € : 890 mm : 3000 mm : 400 mm : 155 mm : 490 mm : 700 mm : 15 : 160 MK : 24 : 160 : 0.032 - 38.9 mm/U : 0.016 - 19.45 mm/U : 0.5 - 480 mm : 60 - 1/16 Gänge/ : 0.125 - 120 : 525 mm : 270 mm : 125 mm : 6 MK : 260 mm : 22 kW : 7500 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.500 mm € 100120,00 turning length2.000 mm € 103850,00 turning length4.000 mm € 123510,00 turning length5. ...

: neu : Bulgarien : 81780 € : 1545.64 € : 760 mm : 3000 mm : 380 mm : 132 mm : 520 mm : 560 mm : 11 : 140 MK : 17 : 7,5 - 1015 1/min : 150 : 0.039 - 18 mm/U : 0.02 - 9 mm/U : 0.5 - 180 mm : 60 - 1/6 Gänge/ : 0.125 - 45 : 410 mm : 150 mm : 105 mm : 6 MK : 225 mm : 15 kW : 4470 kg driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: t ...

: 0400 mm : 246 mm : 1250 mm : 195 mm : 54 mm : 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0460 mm : 270 mm : 1500 mm : 230 mm : 76 mm : 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 710 KW, 2 1/min

Biogas CHP 710 kWel., MAN E 3872 LE 201, with generator Leroy Somer including mains start device, control cabinet with touch display, gas control system, complete heating system including emergency and mixing table cooler and transfer plate exchanger, exhaust gas silencer as chimney height 10.0m, SCR control incl. Oxi/ SCR honeycombs, exhaust gas heat exchanger with bypass, gas blower, in a 10m sound insulation container. Short-term delivery possible

Diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump -Manufacturer: Bosch, injection pump for 6-cylinder diesel engine -Type: PES6R120/720LV B 403 860 177 RQV300-900 RV -Individual components: see photos -Number: 1x injection pumps available -Price: per piece -Dimensions: 460/215/H325 mm -Weight: 32 kg

Various spare parts for engine 956 New . OEM. All in their original packaging. Stored in containers. Price against bid !

turning diameter over bed: 380 mm turning diameter over slide rest: 190 mm turning length: 1000 mm total power requirement: 4 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,511,8 m Training Machine - First-Hand Features: 3-axis digital display 3-jaw chuck 4-jaw chuck Collet chuck Active chuck guard Cover for lead and feed spindles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lg.Nr. 26208 Technical data: - Center height 120 mm - Center width 450 mm - Largest circulation – Ø over bed 250 mm - Spindle bore 23 mm - Spindle mount with threaded nose DIN 55027 - Mounting cone of the tailstock quill MK 2 - 20 spindle speeds 60 - 3000 rpm - Feeds - longitudinal 0.03 - 3.0 mm - Flat 0.015 - 0.150 mm - Thread pitches 0.25 - 5 mm - Drive 400 V / 1.1 / 1.5 kW - Space requirement approx. W 1200 x H 1250 x D 650 mm - Weight approx. 700 kg - with: - 3-jaw chuck, - Quick-change steel holder - Moving grain tips - Separate tool cabinet with various accessories

turning diameter over bed: 320 mm turning diameter over slide rest: 180 mm turning length: 1000 mm turning diameter in the gap: 460 mm turning speeds: 70 -2000 U/min centre height: 160 mm spindle bore: 27 mm total power requirement: 2,0 KW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,8 x 1,2 x 1,6 m Centre lathe (lead-screw and feed-rod lathe) - 160 mm 3-jaw chuck - Faceplate - Spare jaws - Quick-change tool post (base unit) - 3 tool holders - 2 steadies - Live centre - Chip tray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 330 mm turning diameter over slide rest: 195 mm turning length: 750 mm center height over bed: 160 mm centre distance: 650 mm digital readout: 3 Achsen HEIDENHAIN bed width: 205 mm spindle bore: 36 mm spindle taper: KK5 DIN 55027 turning speed range: 48 - 2500 U/min power requirement: 3,0 kW 4-jaw-chuck diameter: 160 mm quick change toolholder: MULTIFIX Typ A taper in tailstock-quill: MK 3 dia. of quill: 40 mm quill stroke: 100 mm voltage: 400 V total power requirement: 3,2 kW weight of the machine ca.: 680 kg dimensions of the machine ca.: 1,60 x 0,80 x 1,55 m - Serial-No.: 4432 - HEIDENHAIN 3-axis digital readout - MULTIFIX quick-change tool holder - Collet chuck including collets Ø 8 - Ø 27 mm - Face plate Ø 250 mm - Quick-action drill chuck - Center point The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WEILER COMMODOR L&Z lathe from school operation -Turning length 1000mm -Turning diameter max. 180mm Bar Passage 56mm -Speed range 56-2000 rpm (gearbox) -Automatic longitudinal/plane feeds - Thread: Metric/Inch/etc. -Tailstock Mk4 -Three-jaw chuck approx. 200mm -Multifix base holder with insert -Tailstock MK 4 -Coolant device -Electric lining protection -Work light -Swarf back wall -Guide and pull spindle cover -2x Emergency / Off -Machine documentation -Good operational condition Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg

Lead and tension spindle lathe Weiler Matador -Center width: 500 mm -Tip height: 140 mm -Feed range longitudinally over belt: 0.05–0.40 mm/rev -Feed range longitudinally via interchangeable gears: 0.018–0.800 mm/rev - Spindle head: size 5 -Drive: three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Wedge bar chuck Forkardt F 160 -Quick-change holder Multifix -4 lathe chisel holders -Drill chuck -Moving centering tip Dimensions: LxWxH 1.5x0.6x1.2 meters / Weight 600Kg

turning diameter over bed: 280 mm turning diameter over slide rest: 150 mm turning length: 500 mm center height over bed: 140 mm centre distance: 500 mm bed width: 205 mm spindle bore: 40 mm turning speed range - stepless: 30 - 4.000 U/min 3-jaw-chuck diameter: 140 mm quick change toolholder: MULTIFIX Typ A drive capacity - spindle motor: 4,0 kW taper in tailstock-quill: MK 3 dia. of quill: 40 mm quill stroke: 85 mm voltage: 400 V total power requirement: 7,5 kW weight of the machine ca.: 800 kg dimensions of the machine ca.: 1,40 x 0,95 x 1,55 m - Serial-No.: 154 - SIEMENS 3-axis digital display - MULTIFIX quick-change tool holder - rotating centering tip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 010105 : prompt, Zwischenverkauf v : Bulgarien : 50210 € : 863.32 € : 1 : 45200 € : 600 mm : 2000 mm : 300 mm : 80 mm : 400 mm : 400 mm : 8 : 90 MK : 21 : 20 - 2000 1/min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 64 : 0.5 - 120 mm : 60 - 1/4 Gänge/ : 0.125 - 30 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 7.5 kW : 3600 mm : 1250 mm : 1400 mm : 3110 kg driven by conventional gearbox 3-axes digital readout Fagor 40i quick change toolpostAmestra Multisuisse type C with 4 holders (3 square, 1 round) 3-jaw chuck Bison3204/DIN6350, Ø 250 mm spindle dead center four way rapid traverse device electromagnetic brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine accordin ...

Turning diameter over face slide: 200 mm Spindle bore: 32 mm Circumferential diameter over bed slide: 315 mm Tip width: 600 mm Turning length: 560 mm Quill stroke: 140 mm Total weight: 1,750 kg Digital display Heidenhain Collet System E163

engine lathe, year 2007, CNC 840 D. Used machine. More info & price on IndustrialBuyer.

The machine is equipped with a tailstock, a Multifix clamping system and a 3-jaw chuck, diameter: 300 mm, incl. two steady rests. Year of Manufacturing: presumable 2018

The machine is equipped with a tool holder, a tailstock, and a 3-jaw chuck, diameter: approx. 310 mm. • centre distance over bed: 300 mm • centre distance over support: 200 mm

Includes a 3-jaw chuck, jaw width: 250 mm, tailstock, Multifix basic holder as well as a 3-axis digital readout and a workbench with matching Multifix tool holders and two jaw chucks, indexable inserts, collets, and milling cutters. Additional technical specifications: • Center height over bed: 200 mm • Center height over support: approx. 110 mm • Center height over cross support: approx. 90 mm

• centre length: 1000 mm • centre height over bed: approx. 250 mm • centre height over support: 150 mm • Incl. steady rest.

The machine is equipped with a tailstock, a Multifix tool post, and a quick-action chuck, including a 3-axis digital readout system manufactured by FAGOR.

The machine is equipped with a tailstock, a Multifix clamping system and a 3-jaw chuck, diameter: 300 mm, incl. two steady rests. Year of manufacturing: presumable 2018

: gebraucht : 2001 : 010191 : prompt, Zwischenverkauf v : Deutschland : 22100 € : 1 : 320 mm : 650 mm : 160 mm : 40 mm : 192 mm : 205 mm : 5 : 5 MK : 16 : 48 - 2500 1/min : 24 : 0.02 - 0.63 mm/U : 0.006 - 0.2 mm/U : 0.25 - 8 mm : 80 - 2 Gänge/ : 0.2 - 4 : 200 - 5 : 150 mm : 100 mm : 40 mm : 3 MK : 85 mm : 2,4 / 3 kW : 1582 mm : 715 mm : 1245 mm : 720 kg Heidenhain 3-axis digital readout NEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Quick-release collet chuck with collets from 3 to 30,5 mm Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONES ...

engine lathe, year 2007, CNC 8055 TC. Used machine. More info & price on IndustrialBuyer.

Dreh-Øüber Bett: 400 mm Dreh-Øüber Support: 220 mm turning length: 1000 mm spindle turning speed range: 12,5 - 2000 U/min spindle taper: Bajonett 55022 spindle bore: 47 mm feeds - longitudinal: 0,07 - 4,16 mm/U feeds - cross: 0.035 - 2,08 mm/U thread - mm pitch: 0,87 - 192 mm thread - inch: 2 - 24 Gang/ inch. rapid travel - longitudinal/face: 3,4 / 1,7 m/min spindle drive: 11 kW power capacity: 13 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: 2,8 x 1,2 x 1,5 m • 3-jaw chuck Ø 250 mm, • 4-jaw chuck Ø 200 mm, • 2-axis- digital display, ANILAM WIZARD LATHE - retrofitted in 1992 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is equipped with a tailstock, a Multifix tool holder, and a digital readout from the manufacturer ACU-RITE. The machine comes from a training workshop, therefore the lead and feed screw are covered. Additional technical specifications: • Center height over cross slide: 90 mm • Center length: approx. 900 mm • Center height over bed: 170 mm

Key data: 4700 , 600

For sale complete installation 2x diesel generator set 1x Generator set Brand: MAN Type: 8L 40/45 Year: 1998 Power: 5832 KVA Alternator: Leroy Somer 1x Generator set Brand: MAN Type: 6L 40/45 Year: 1994 Power: 4265 KVA Alternator: AVK The equipment included with this installation can be seen in the photo More photos on request

Key data: 280 mm, 365 mm, 2240 U/min

Circulation over bed 560 mm Wire diameter over carriage 365 mm Turning length 2000 mm Spindle head DIN 55027 Front bearing 100 mm Spindle bore 62 mm Spindle speed 11.2 - 2240 rpm Spindle motor 15 KW Face slide travel 345 mm Upper slide travel 125 mm Bed widthw 360 mm Quill cone i. tailstock 5 MK Quill diameter 80 mm Quill stroke 190 mm Thread pitches 0.125 - 112 mm Machine weight 4500 KG Dimensions 3.5 x 2.0 x 2.2 m 3-axis digital display 3-jaw chuck 1 roller bezel MULTIFIX steel holder Sleigh rush walk Equipment for Metric, Inch, Module & Diametrical Pitch Threads Geometric overhaul in 2023, little used, excellent condition!

Key data: 1025 KW, 1800 1/min

In very good condition Rotating Removed due to scrapping of ship The engine has made an overhaul of the piston liners and head at 72,000 hours of rotation

KNUTH Basic Plus L&Z Lathe /Year 2011 -Tip height 150mm -Max turning diameter 300mm -Max turning diameter over support 178mm -Max. turning diameter without bridge 430mm -Tip width: 810 mm -Spindle bore: Ø 38 mm -Spindle speed: 60–1,550 rpm, 9 steps -Automatic longitudinal/plane feeds -Spindle mount: Camlock D1-4" -Tailstock cone: MK 3 -Quill stroke: 100 mm -Bed width: 180 mm -3-axis digital display -Multifix quick-change holder with insert -Electric lining protection -Work light -Rotating center punch tip -3-jaw chuck -2x bezels -Documentation Dimensions: LxWxH 1.6x0.7x1.2 meters / Weight 520Kg

Lead and tension spindle lathe Weiler Matador -Center width: 500 mm -Tip height: 140 mm - Spindle head: size 5 -Drive: three-phase motor -Speed range: 15–3,550 rpm / Stepless speed adjustment -Coolant pump -Lining protection -Three-jaw chuck -Quick-change holder Multifix & insert -Documentation Dimensions: LxWxH 1.5x0.6x1.2 meters / Weight 600Kg

max. turning length: approx. 800 mm, centre height: approx. 150 mm, hollow spindle diameter: approx. 50 mm, with 3-axis digital display, Fabr. ELESTA, type: VISULESTAIIE, with multifix steel holder, magnetic chuck, coolant device, splash guard and machine light as well as various machine accessories

Key data: 250 mm, 2240 U/min

max. turning length: 1000 mm, center height: 250 mm, hollow spindle diameter: 60 mm, max. speed: 2240 rpm, with 3-jaw chuck, Fabr. SCHUNK, type: ROTA-S-PLUS, diameter: 250 mm, with machine light, steady rest and Multifix steel holder

: gebraucht : 1992 : 010190 : prompt, Zwischenverkauf v : 17900 € : 1 : 320 mm : 650 mm : 160 mm : 40 mm : 192 mm : 205 mm : 5 : 5 MK : 16 : 48 - 2500 1/min : 24 : 0.02 - 0.63 mm/U : 0.006 - 0.2 mm/U : 0.25 - 8 mm : 0.2 - 4 : 150 mm : 100 mm : 40 mm : 3 MK : 85 mm : 2,4 / 3 kW : 1582 mm : 715 mm : 1245 mm : 680 kg Heidenhain 3-axis digital readout NEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our fa ...

Key data: 2000 KW, 1000 1/min

MWM Deutz TBDG 441 BV16, dual fuel, Gas, Diesel, Year 1993, also spare parts for sale, turbocharger, injection pump, cylinder heads, crankshaft, ec. ec. Price per piece

turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm turning length: 500 mm spindle bore: 36 mm turning speeds: 30 - 3550 U/min spindle nose: Kurzkegel Gr.5 DIN 55022 tailstock quill taper MT: 3 total power requirement: 2,2 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,511,5 m On customer order - Private machine - Accessories: 3-jaw chuck 4-jaw chuck Collet chuck with lever clamping Multifix A + various holders Operating tool Various turning tools Original documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sell unused Meidinger Direct Drive Compressor .

Industrial engine with hydraulic pump ID: 2037/R Manufacturer : Irion-Car The part is technically in good condition, Nevertheless, this is an original used items, which shows signs of wear. Scope of delivery can be found in the photos. Internal number: 618 688 397695580530

greates pass round over bed: 320 mm turning dia. over face-slide: 198 mm centre height: 160 mm turning length: 650 mm spindle turning speed range: max. 3.000 U/min spindle passage: 40 mm tailstock quill taper MT: 3 quill stroke: 85 mm total power requirement: 4 kW weight of the machine ca.: 0,68 t dimensions of the machine ca.: 1582 x 715 x 1145 m Well-maintained machine from a vocational school Accessories/Equipment: - CE marking - WEILER 3-axis digital readout - Multifix tool post - 3 Multifix tool holders - KLOPFER 160 mm 3-jaw chuck - KLOPFER 160 mm 4-jaw chuck - Various sets of clamping jaws - Safety drive plate - 34 collets - Collet clamping system - Drill chuck - Live center - Various machine keys/wrenches - Machine mounts/feet - Work light - Chuck guard with electrical cut-off - Coolant pump - Operating manual and circuit diagrams The data for this ad was created with ModulMWS  ...

Sell Flame Flashback Arrester for Jenbacher BR 6

turning diameter over bed: 280 mm turning dia. over face-slide: 150 mm centre height: 140 mm turning length: 500 mm main drive stepless adjustable: 0 - 6.000 U/min spindle speed: 30 - 5.000 U/min max. workpiece weight between centers: 100 kg quill stroke: 85 mm total power requirement: 4 kW weight of the machine ca.: 800 kg dimensions of the machine ca.: 1430 x 950 x 1550 mm Bed Slide (Z-Axis): - Guide length of the bed slide: 350 mm - Bed width: 205 mm - Slide travel: 500 mm - Max. feed force: 3500 N Flat slide (X-axis): - Slide travel: 150 mm - Slide width: 140 mm - Max. feed force: 2500 N Upper slide (Z-axis): - Slide travel: 100 mm - Slide width: 92 mm - Swivel range of the cross slide: 75 ° The data for this ad was created with ModulMWS - the soft ...

Iveco AIFO Marine Diesel Engine with ZF Marine Transmission Used marine diesel engine assembly equipped with a ZF marine transmission. The engine includes twin MANN W 1170/7 oil filters, a Bosch 24 V electronic control module, turbocharger, intake and exhaust system, hoses and associated pipework. Manufacturer: Iveco AIFO Engine type: Marine diesel engine Oil filters: 2 x MANN W 1170/7 Control system: Bosch 24 V electronic control module Transmission manufacturer: ZF Transmission part list number: 3215004655 Transmission ratio: 2.07 Transmission oil: SAE 30, approximately 7.0 l Clutch oil pressure: 20 Approximate dimensions: 1,800 x 1,100 x 1,300 mm Approximate weight: 1,200 kg The engine and transmission are offered in used condition with visible surface corrosion, weathering, paint deterioration and wear on hoses and pipework. The engine, gearbox, control ...

MWM Inline Six-Cylinder Turbocharged Diesel Engine Large MWM marine/industrial diesel engine with mechanically governed fuel injection, liquid cooling and charge-air intercooling. Manufacturer: MWM Configuration: Inline six-cylinder diesel engine Induction: Turbocharged with charge-air cooler Fuel system: Mechanical injection with six high-pressure injection lines Equipment: Injection pump, turbocharger, charge-air cooler, starter, alternator, filters, cooling system, pipework and flywheel/coupling assembly Charge-air cooler: Ladeluftkühler by Motorenfabrik Langenstein & Reichert GmbH & Co. KG Condition: Used, stored outdoors Approximate dimensions: 2,200 × 1,100 × 1,450 mm Approximate weight: 2,500 kg The engine appears substantially complete but shows surface corrosion, oxidized fittings, deteriorated paint and weathering from prolonged storage. So ...

MWM Six-Cylinder Diesel Generator Set Open-frame stationary diesel generator set comprising an MWM inline six-cylinder diesel engine directly coupled to an AC alternator. Manufacturer: MWM Configuration: Inline six-cylinder diesel engine Fuel system: Individual mechanical fuel-injection elements and lines Cooling: Liquid-cooled Equipment: Dry-type air cleaner, dual fuel filters, starter, charging equipment, cooling system and separate control panel Monitoring: Carlo Gavazzi Mini TOL 122B alarm and monitoring unit Hour counter: Approximately 3,168 hours, photo-indicated Condition: Used, stored outdoors Approximate dimensions: 2,600 × 1,050 × 1,500 mm Approximate weight: 2,200 kg The generator set appears substantially complete but shows widespread corrosion, oxidation, dirt, biological debris, aged hoses and weathered wiring. Portions are wrapped for storage ...

HT 18 mini-excavator, equipped with 3-cylinder KUBOTA D722 diesel engine, self-braking recessed track engines, protective cage and reinforced frame, joystick and electric controls, equipped with extendable undercarriage, boom swing, hydraulic system for hammer, with 200mm bucket and 800mm bucket never used, 0 hours The color of the excavator may vary according to availability (yellow, red, other) Overall dimensions: 2700 x 1100 x 2600 mm Weight: 1650 kg Auction-ID: A7-50801-1

HT25 model crawler mini excavator, equipped with 360 degree rotation fifth wheel, swing arm, control joystick, auxiliary system for hammer, electronic controls, 3-cylinder Kubota D1105 water-cooled engine, with self-braking recessed track engines never used, 0 hours The color of the excavator may vary according to availability (yellow, red, other) NEVER USED Overall dimensions: 2900 x 1500 x 2500 mm Weight: 2400 kg Auction-ID: A7-50801-7

HT 18 mini-excavator, equipped with 3-cylinder KUBOTA D722 diesel engine, self-braking recessed track engines, protective cage and reinforced frame, joystick and electric controls, equipped with extendable undercarriage, boom swing, hydraulic system for hammer, complete with demolition hammer and 400mm digging bucket never used, 0 hours The color of the excavator may vary according to availability (yellow, red, other) Overall dimensions: 2700 x 1100 x 2600 mm Weight: 1650 kg Auction-ID: A7-50801-10

HT 18 mini-excavator, equipped with 3-cylinder KUBOTA D722 diesel engine, self-braking recessed track engines, protective cage and reinforced frame, joystick and electric controls, equipped with extendable undercarriage, boom swing, hammer hydraulics, never used, 0 hours The color of the excavator may vary according to availability (yellow, red, other) Overall dimensions: 2700 x 1100 x 2600 mm Weight: 1650 kg Auction-ID: A7-50801-15

HT 18 mini-excavator, equipped with 3-cylinder KUBOTA D722 diesel engine, self-braking recessed track engines, protective cage and reinforced frame, joystick and electric controls, equipped with extendable undercarriage, boom swing, hammer hydraulics, never used, 0 hours The color of the excavator may vary according to availability (yellow, red, other) Overall dimensions: 2700 x 1100 x 2600 mm Weight: 1650 kg Auction-ID: A7-50801-25