finger used for sale

GeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Working area 1Longitudinal700 mmCross420 mmVertical380 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMain driveDrive power (100% DC) 6 kWDrive power (40% DC) 8,5 kWTorque (100% DC) 41 NmSpindle taper BT 30Speed range 20 - 15000 rpmTorque (40% DC) 48 NmClamping System ISO 7388-3 - JD30ToolchangertoolchangerType of magazine DiskNumber of tools 25Integrated swivel rotary table simultaneousIntegated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Rotary joint, 4-channels Inclusive Software packageProduction package band filter ICS 40ba ...

pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 180 mm/sec return speed: 185 mm/sec work speed: 10,0 mm/sec work stroke: 275 mm dayligth: 550 mm oil volume: 300 ltr. table height: 900 mm voltage: 400 Volt back stop - adjustable: 800 mm table width: 160 mm total power requirement: 18,5 kW weight: 14.000 kg range L-W-H: 5150 x 2250 x 3000 mm -------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z ...

Capacity 3100 x 175 Delem DA 58T CNC control Y1, Y2, X and R axis CNC controlled CNC Bombing Amada/Euro clamping Akas Fiessler laser 4 touch fingers Including tools

Capacity 4100 x 175 tons Stroke 700mm ESA S640 CNC DSP laser on the front Y1, Y2, X, R, Z1 and Z2 CNC controlled Double touch fingers Walk-in protection at the rear Wila New Standard clamping Includes 1 set of tools

Capacity 4100 x 175 tons Stroke 700mm ESA S640 CNC DSP laser on the front Y1, Y2, X, R, Z1 and Z2 CNC controlled Double touch fingers Walk-in security at the rear More photos to follow soon

Producer : Fischer & Krecke - Block Botttom SOS bag machine. Type : Combi 51 BB Year 1980 Machine No. 465 Komm. No. 54 126 With : F&K 2 colour flexo printing unit. Type 13DF Machine No. 2441 Komm. No. 54 127 With servo-gear With : photocell With : Bottom patch unit With : 2 unwinds for 2-ply bags With : Nordson blue, hotmelt glue unit With : 4 form plates – extra fingers – 2 spare anilox rollers Bag width : 140 - 320 mm. Cut-off length : 350 - 700 mm. Bottom width : 90 - 210 mm. Mechanical speed : 250 bags / min. Complete mechanical overhauled. It got all new electric. – drive – main motor – servo gear – photocell – touch screen

pressure: 175 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 410 mm ram stroke speed: 180 mm/sec return speed: 135 mm/sec work speed: 10,0 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 90,0 mm oil volume: 200 ltr. voltage: 400 Volt total power requirement: 15,0 kW weight: 9.450 kg range L-W-H: 4.250x2.150x2.800 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen 2D graphic programming 15 high definition color TFT screen Bending sequence calculation Product programming and display in real size USB interface - Motorized backgauge with R-axis, on recirculating ball spindles - X ...

pressure: 60 t chamfer lenght: 1270 mm distance between columns: 1000 mm column arm: 410 mm ram stroke speed: 160 mm/sec return speed: 165 mm/sec work speed: 10 mm/sec work stroke: 275 mm dayligth: 530 mm table height: 900 mm table width: 90,0 mm oil volume: 150 ltr. voltage: 400 V engine output: 7,5 kW back stop - adjustable: 0 - 500 mm Weight: 4.320 kg range L-W-H: 2.250x1.960x2.750 mm -------------------------- Press brake with optional equipment installation height / Cylinder as well as increased bending beam velocities -------------------------- Facilities: - DELEM - CNC ER 70 graphics controller - Motion control: Y1 - Y2 - X - R axes - Back gauge with X-axis 800 mm, R = 250 mm with 2 gauge fingers, ball screws - Quick change punch holder AMADA Promecam - Rehfuss-top tool, ground version - Universal die block 60x60 mm with 4V in the die shoe - SIEMENS - electrical system - BOSCH /  ...

Bending length: 3100 mm; Between columns: 2650 mm Stroke 220 mm; Pressure: 130 t Delem DA65 CNC-controlled press, 2D graphics. Controlled axes -Y1-Y2-X-R+I + CNC-controlled Wila table bending compensation + hydraulic clamping of upper and lower tools. Pneumatic die shifting. 6 fingers on the bumper. Machine weight 12 tons. Drives 11.5 kW. Tool mounting - Wila New Standard. Automatic bending support

pressure: 40 t chamfer lenght: 1270 mm distance between columns: 1050 mm column arm: 350 mm dayligth: 387 mm max. ram stroke: 170 mm feed down: 140 mm/sec feed up: 170 mm/sec pressing speed: 17 mm/sec main drive: 5,5 kW table height: 850 mm back stop - adjustable: 800 mm adjustment speed: 230 mm/min total power requirement: 5,5 kW weight of the machine ca.: 3,22 To. dimensions of the machine ca.: 2,15 x 2,3 x 1,65 m -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 58T (TouchScreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning contro ...

chamfer lenght: 1050 mm plate thickness: 1,2 mm distance between columns: 1060 mm bending angle max.: 135 ° weight of the machine ca.: 190 kg dimensions of the machine ca.: 1,22 x 0,8 x 1,02 m Light weight angle bending machine, for simple but effective bending work. Especially suited for making boxes. Due to its price this has proved a popular machine for workshops and DIY. Upper and lower blade are segmented. With metal box for the fingers. upper and lower blade segmented 1 hand operation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 135 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 410 mm ram stroke speed: 200 mm/sec return speed: 120 mm/sec work speed: 10,0 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 90,0 mm oil volume: 200 ltr. voltage: 400 Volt total power requirement: 11,0 kW weight: 8.650 kg range L-W-H: 4.250 x 2.050 x 2.800 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen 2D graphic programming 15 high definition color TFT screen Bending sequence calculation Product programming and display in real size USB interface - Motorized backgauge with R-axis, on recirculating ball spindles  ...

pressure: 400 t chamfer lenght: 4100 mm distance between columns: 3550 mm column arm: 510 mm ram stroke speed: 110 mm/sec return speed: 130 mm/sec work speed: 8,0 mm/sec work stroke: 375 mm dayligth: 650 mm oil volume: 400 ltr. table height: 1000 mm voltage: 400 Volt back stop - adjustable: 800 mm table width: 240 mm total power requirement: 30,0 kW weight: 26530 kg range L-W-H: 5450 x 2650 x 3470 mm -------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 ...

: neu : 9690F : China : 690 € : 1 : 100 mm : 3 mm : 90 ° : 90 kg Beidseitig verstellbare Anschläge Fingerschutz Ausrüstung gemäß CE Vorschriften The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press brake Ultima 4100 mm Pressing force 320 tons Control ESA 650 Windows with workstation software 4-axis backgauge CNC-controlled 1 backgauge X3 CNC controlled 2 additional stop fingers 2 heavy-duty mounting arms adjustable in height and width to linear guide + parking space Machine table special design 2 pneumatic sheet metal supports with brushes Hydraulic clamping for Wila Matritzen incl. hydro unit Hydraulic clamping for Wila upper tools incl. hydro unit Raised frame stroke 400 mm Installation height 730 mm D-STM Automatic sheet thickness measurement-20mm incl. correction database B9mn0pxrvh Oil Cooler

pressure: 200 t chamfer lenght: 4100 mm distance between columns: 3150 mm stroke - stepless adjustable: 200 mm column arm: 300 mm table height: 1090 mm dayligth: 450 mm working feed: 9,0 mm/sec return speed: 80,0 mm/sec Control: NC ATL 550 hydraulic: 265 bar voltage: 380 V total power requirement: 18,7 kW weight: 15000 kg range L-W-H: 4400 x 1900 x 3000 mm Furnishing: - NC controlled hydraulic press brake, with torsion shaft - with ATLANTIC NC control ATL 550 Positioning of backgauge ( X ) Depth setting positioning ( Y1+Y2 ) Possibility of programming different programs Storage capacity max. 200 programs - max. 400 sentences Pivoting control panel, front left - electric backgauge, on ball screws with 2 stop fingers, manually adjustable - manual table crowning, with analogue display Adjustment at the front left, with a hand crank - divided deer foot upper tool 85° - reversible Mul ...

pressure: 300 t chamfer lenght: 3100 mm distance between columns: 2550 mm column arm: 500 mm ram stroke speed: 140 mm/sec return speed: 150 mm/sec work speed: 10,0 mm/sec work stroke: 320 mm dayligth: 590 mm table height: 905 mm oil volume: 400 ltr. voltage: 400 Volt working pressure: 283 bar Number of working hours: ~ 21.835 h total power requirement: 23,0 kW weight: 18.250 kg Dimensions (HxWxD): 4550 x 2250 x 3050 mm current new price ~ 135.000 euros -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T (touch screen) 2D graphic touch screen programming mode 17 high-resolution color TFT Complete Windows application suite Delem Modusys compatibility (module  ...

Used Meyn breader model MB600 is a device used to coat products evenly with various type of bread crumbs. Device is suitable for products such as chicken nuggets, chicken breasts, chicken drumsticks, seafood, fish fillets, fish fingers, burgers, onion rings, mushrooms etc. MB600 is equipped with coating circulation system and a fan for removing excess coating. -Belt width: 600mm -Mobile construction -Adjustable speed -Equipped with vibration device -All stainless steel Dimensions: 3100 x 1300 x H2100mm

pressure: 230 t chamfer lenght: 3600 mm distance between columns: 3150 mm column arm: 300 mm table width: 200 mm dayligth: 450 mm stroke: 200 mm back stop - adjustable: 500 mm working feed: 7,0 mm/sec return speed: 80,0 mm/sec work height max.: 965 mm oil volume: 275 l Pressure power: 265 bar total power requirement: 18,7 kW weight of the machine ca.: 13300 kg. range L-W-H: 4100 x 2200 x 2670 mm Furnishing: - DELEM CNC control, model DA 56 (conversion in 2014) Pivoting control panel in front left - CNC electric backgauge (X axis) with 3x stop fingers, manually adjustable from the side - CNC pneumatic height adjustment of the stop fingers (R axis) - manual table crowning Adjustment by hand crank, with analogue display - 1x reversible MULTI V - universal die block - 1x complete set of upper tools - other / various application tools - free-moving 2hand/foot control The data for this ad ...

Standard configuration ? Stable machine frame as a welded, all-steel construction ? Ram (press beam), highly resistant to torsional forces ? Electrohydraulic downstroke drive via proportional valves ? Modern block hydraulics ? CNC backgauge with rack-and-pinion drive, for X and R axis, safe adjustment of stop fingers from the front ? Modufix upper tool clamping system, manual ? Lower tool holder for single-V dies, manual clamping, programmable shifting ? Control system: 2D/3D graphic control, Delem DA 69 with 12 color screen (LCD) ? Safety equipment Additional equipment Crowning options ? CNC crowning Backgauge system options ? 4-axis backgauge system ? 2 additional clip-on stop fingers Tool clamping and angle messuring system ? Upper tool claming, hydraulic ? Lower tool clamping, hydraulic ? ACB Preparation Material handling options ? 2 front support brackets

pressure: 135 t chamfer lenght: 4100 mm distance between columns: 3600 mm stroke: 130 mm dayligth: 325 mm throat: 250 mm working feed: 10,0 mm/sec return speed: 100 mm/sec table width: 180 mm work height max.: 865 mm Control: M 9101 oil volume: 225 Liter engine output: 11,0 kW weight: 11.500 kg Dimensions (LxWxH): 4270 x 1500 x 2530 mm Furnishing: - HACO / Robosoft NC control, model M 9101 controller - with external display / screen - pivoting control, front left - electric back gauge (X axis) - with 2x stop fingers, manually adjustable manual windage (Z axis) manual height adjustment (R axis) - hydraulic upper tool clamping - manual table crowning, adjustment with hand crank - segmented upper and lower tools - free-moving 2-hand control - free-moving footswitch - rear protective device (self-made) - User manual in German Machinevideo : https://www.youtube.com/watch?v=TXQTytSd_6Y&feat ...

pressure: 135 t chamfer lenght: 3100 mm distance between columns: 2600 mm dayligth: 550 mm throat: 410 mm stroke: 275 mm working feed: 10,0 mm/sec return speed: 120,0 mm/sec work height max.: 900 mm quantity of oil: 200 l Control: DELEM DA 58 T total power requirement: 11 kW weight of the machine ca.: 8650 kg dimensions: 4250 x 2050 x 2800 mm -------------------------------------------------- --------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- --------- Furnishing: - DELEM CNC control model DA-66T graphic/touch screen 2D graphical programming 17 TFT color screen with high resolution Bending sequence calculation Product programming and real size display USB interface intuitive, graphical entry of profiles Automatic calculation of features:  ...

Y1 / Y2 / X / R / Z synchronbsp; manual crowning backgauge with 4 fingers LVD upper amp; lower tooling hydraulic Capacity: 165 ton x 3100 mm Backgauge: CNC Control: Esa S640 Touch Passage between uprights: 2550 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 6,5 mm/sec Returning speed: 60 mm/sec Electric motor (power): 14 kW Length: 3160 mm Depth: 2365 mm Height: 2810 mm Weight: 8,5 ton

pressure: 180 t chamfer lenght: 4100 mm distance between columns: 3150 mm stroke - stepless adjustable: 200 mm column arm: 300 mm table height: 1090 mm dayligth: 450 mm working feed: 9,0 mm/sec return speed: 80,0 mm/sec Control: NC ATL 550 hydraulic: 235 bar voltage: 380 V total power requirement: 15,0 kW weight: 14200 kg range L-W-H: 4400 x 1900 x 3000 mm Furnishing: - NC controlled hydraulic press brake with torsion shaft - ATLANTIC NC control ATL 550 Positioning of backgauge ( X ) Depth setting positioning ( Y1+Y2 ) Possibility of programming different programs Storage capacity max. 200 programs - max. 400 sentences Pivoting control panel, front left - electric back gauge with 2 stop fingers, manually adjustable on ball screws - manual table crowning, with analogue display - divided deer foot upper tool 85° - divided MultiV - universal matrix block - rear protection - free-mo ...

Semi-automatic folding wrapping machine (cellophaner) for all heat-sealable films. - Adjustable format sets for the entire range of formats - High-quality pleated wrap for perfumery and cosmetic products -Film cutting unit integrated in the machine - All product-carrying parts of the machine are specially coated for delicate box surfaces -Products are transported gently and individually through the machine with the help of transport fingers Condition: Top condition, unused Availability: immediately Location: Switzerland Weight: 450 kg Electrical values: 240 V / 50 Hz / 13 A Format range length: 40 - 300 mm Format range width: 40 - 200 mm Height format range. 25 - 100 mm Wrapping: all heat-sealable films Achievement. up to 10 packs/minute Machine hours :0

pressure: 75,0 t chamfer lenght: 2620 mm distance between columns: 2055 mm column arm: 400 mm ajustment speed: 100 mm/sec working feed: 10,0 mm/sec return speed: 90,0 mm/sec stroke: ~ 140 mm dayligth: ~ 360 mm table height: 930 mm table width: 85,0 mm Control: ELGO P8822 oil volume: 150 ltr. engine output: 7,5 kW weight of the machine ca.: ~ 6.500 kg. range L-W-H: 3700 x 1800 x 2700 mm Furnishing: - electro-hydraulic conventional NC press brake - Swivel control front right, with ELGO P8822 control unit digital position indicator Entry of target/actual values possible - Electro-motor backgauge - X axis Travel = 700mm - electrical adjustment of the immersion depth - Y axes - with 2x manually adjustable stop fingers (R+Z axis) - Upper tool holder with upper wedge crowning - AMADA system - Lower tool holder - System AMADA - very many diverse / divided upper tools - rear guard (door) - lat ...

pressure: 175 t chamfer lenght: 3100 mm distance between columns: 2600 mm dayligth: 550 mm throat: 410 mm stroke: 275 mm working feed: 10 mm/sec return speed: 135 mm/sec work height max.: 900 mm quantity of oil: 200 l total power requirement: 15 kW weight of the machine ca.: 9450 kg - DELEM CNC control model DA-58T graphics / touchscreen 2D graphic programming 15 high definition color TFT screen Bending sequence calculation Product programming and display in real size USB interface - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system A with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH /  ...

pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3600 mm dayligth: 550 mm throat: 410 mm stroke: 275 mm working feed: 10,0 mm/sec return speed: 185 mm/sec quantity of oil: 300 l Control: DELEM DA 66T total power requirement: 18,5 kW weight of the machine ca.: 13900 kg dimensions: 5150 x 2250 x 3000 mm HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke increased projection -------------------------------------------------- ------- Furnishing: - DELEM CNC control model DA 66T - swiveling touch screen control unit - 7 controlled axes : Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split deer foot upper tool Roleri 135.85.R08, System A - with additional crowning of the upper wedge - Universal die block ...

Changing device, hydraulic changing device HAINBUCH WV 380 ( WV380 ) 60 bar 12 Clamping fingers Clamping circle diameter: Ø 125 mm Dimensions: 260 x 170 x 125 mm

Changing device, hydraulic changing device HAINBUCH WV.0248.0010.00 60 bar 12 clamping fingers Clamping circle diameter: Ø 100 mm Dimensions: 260 x 170 x 125 mm

: gebraucht : 1997 : 8250 : Türkei : 22500 € : 1 : 120 to : 3100 mm : 180 mm : 2550 mm : 240 mm : 320 mm : 170 mm : 11 kW : 3500 mm : 1450 mm : 2270 mm : 7200 kg : 600 mm : 53 mm/s : 10 mm/s : 80 mm/s : 3100 mm With 2-hand and foot control panel Motorised backgauge adjustment 600 mm via +/- push-button with mechanical reading and manual fine adjustment at the front Motorised press depth adjustment via +/- button with digital display 2 backgauge fingers 2 table support arms Foot &, two-hand control Side &, rear safety fairing New Multi V Die 3100 x 90 x 90 mm 7V Openings 9/13/16/20/30/35/56mm cranked upper tool 3100x110x25mm 86°, new grinded User Manual German + EG Declaration of conformity COMPLIES WITH GERMAN UVV &, AUSTRIAN AMVO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t chamfer lenght: 3660 mm distance between columns: mm Control: total power requirement: kW weight of the machine ca.: 13,50 t dimensions of the machine ca.: m • 2 stop fingers, can be moved laterally • Block die with: V75, V50, V40, V25, V20, V10 (V50 and V25 defective at approx. 10cm in the middle) • Straight punch, height 200mm, length 3000mm, segmented • ATL 500 control for immersion depth (Y) and back gauge (X) • Centrally adjustable crowning • 2 support arms • Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 135 t chamfer lenght: 3050 mm distance between columns: 2550 mm stroke of upper beam: 130 mm throat: 200 mm dayligth: 310 mm working feed: 7,0 mm/sec return speed: 50,0 mm/sec Control: konv. work height max.: 905 mm table width: 180 mm oil volume: 250 Liter total power requirement: 7,5 kW weight: 7800 kg range L-W-H: 3500 x 1700 x 2280 mm Furnishing: - simple / conventional electro-hydraulic press brake - swiveling operation, front left - electric, stepless depth adjustment (Y1+Y2 axis) including analogue depth display - manual backgauge, with analogue position display adjustable from the front on ball screws 2x manually adjustable stop fingers - Manual (jog mode) and automatic cycle selectable - split deer foot upper tool (segmented) - 2x reversible MULTI V die blocks - 1x freely movable foot control Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?m ...

TRUMPF 5130 B23 Year: 2021 Machine - C frame Press beam Spherical bearing of the press beam with press beam tilting On-Demand Servo Drive with 4-cylinder technology Distance measurement system (Y axis) with dynamic deflection compensation Hydraulic oil filling (life-long fill) Backgauge - Gauge fingers (two pieces) MACHINE OPTIONS Extension of the open height/stroke + 230 mm CNC-controlled wedge crowning 5-axis backgauge (X, Delta X, R, Z1, and Z2 axis) TRUMPF hydraulic upper tool clamp Keyboard and mouse Additional screen Shop floor programming TecZone Bend Tool Setup Optimizer (TSO) ACB Wireless (Automatically Controlled Bending) ACB Laser (Automatically Controlled Bending) Tool Indicator Part Indicator Front work area illumination Rear work area illumination Support bracket x 2 BendGuard Automatic

pressure: 45,0 t chamfer lenght: 2050 mm distance between columns: 1600 mm column arm: 300 mm stroke: 150 mm dayligth: 395 mm ajustment speed: 100 mm/sec working feed: 1-10 mm/sec return speed: 70,0 mm/sec table width: 60,0 mm table height: 905 mm oil volume: 150 l operating pressure: 340 bar voltage: 400 V total power requirement: 5,5 KW weight of the machine ca.: 3500 kg range L-W-H: 2900 x 2100 x 2420 mm good / well-maintained condition () Furnishing: - DELEM CNC control model DA 65 Swivel control panel, front right 2D graphical programming & product display Tool & program library including new screen (installed 11/2023 .. 1.200 euros) - CNC controlled axes: Y1 + Y2 / X / R axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - manual adjustment of the 2x stop fingers (Z axis) - AMADA-SYSTEM A upper tool clamping, including upp ...

pressure: 100 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 255 mm stroke: 215 mm dayligth: 410 mm table height: 890 mm ajustment speed: 100 mm/sec working feed: 6,5 mm/sec back stop - adjustable: max. 500 mm oil volume: 160 ltr. total power requirement: 5,5 kW weight: 7200 kg range L-W-H: 3750 x 1450 x 2500 mm Furnishing: - electro-hydraulic press brake - CNC CYBELEC EURO III control unit - Control panel, right front - CNC electric back gauge (X axis) - 2x manually adjustable stop fingers - freely movable 2-hand/foot control - side protection device (protective grille) - rear protective device (protective grille) - Operating instructions machine + control Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9308337 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control MANUAL PLUS CNC 2-axis cycle control Turning diameter 500 mm Turning length 1500 mm Turning diameter over carriage 290 mm Flat travel 260 mm Speed 2800 1/min. Tool holder at your fingertips Tailstock

pressure: 60.0 t chamfer lenght: 2050 mm distance between columns: 1550 mm column arm: 255 mm stroke: 165 mm dayligth: 360 mm table height: 890 mm ajustment speed: 85.0 mm/sec working feed: 6,5 mm/sec back stop - adjustable: max. 500 mm oil volume: 100 ltr. total power requirement: 4,0 kW weight: 4600 kg range L-W-H: 2700 x 1450 x 2400 mm Machine from a workshop for the disabled maintained condition () Furnishing: - CNC electro-hydraulic press brake - CNC CYBELEC EURO IV control unit high resolution screen Clear, concise menus in the operators language Tools and products library - Control panel, right front - CNC controlled axes: Y1 + Y2 + X axis - CNC electric back gauge (X axis) - 2x manually adjustable stop fingers - AMADA-SYSTEM A upper tool adapter including upper wedge crowning very many bending/insertion tools (stamps + matrices) - 2x front material/sheet metal support arms  ...

We have used Baykal HNC 8116 CNC hydraulic guillotine shears for sale. The shears have a cutting length of 8060mm and the maximum sheet thickness is 16mm The machine was purchased as new and has been working with us since 2014. During this period, the machine was not very usable, we mostly used it to cut sheets with a thickness of 3-8 mm. The meter reading is 3515h Below are some basic information • Welded steel structure providing the necessary rigidity and durability • CYBELEC CNC control with the possibility of programming the bumper, the number of cuts, the cutting angle, the gap between the blades; • Motorized rear bumper driven by a ball screw with a tilting function to enable the cutting of oversized sheets • Protection of the operators fingers from the front of the machine • 1000 mm long front supports • Side recess in the 350 mm frame †...

AMADA, model HFT 220-3 (220 tons, 3340 mm bending length). Machine from 2003, purchased in 2004, very good condition for the year, serviced, has its power, no leaks. The machine has, among others: - Laser Safe operator safety system - modified hydraulic control to digital - new hydraulic oil and filters - 4 movable bumper fingers in the Z axis (rare configuration) - controlled CNC axes: Y1, Y2, X, R - instruction manual in Polish - lighting of the working field with LED lamps (front and center) - 230 V AC sockets at the back of the machine (2 pcs.) - serviced control box - replaced computer and PLC cooling - a set of tools visible in the picture sheet 6-8 mm few hours Accessories included (4 x 835 mm tool kit, front rests, clamps).

lvd ppeb 50/20 mnc 95 year: 1991 hours: 58000h control unit: lvd mnc 95/c press force: 500 kn. bending length: 2000 mm main motor power: 7.5 kw throat: 250 mm machine weight: 4000 kg dxwxh: 2000x2500x2500mm a lot of additional tools for bending. y+x cnc, z axis manually controled with 4 fingers.

pressure: 165 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 450 mm stroke: 250 mm dayligth: 440 mm ajustment speed: 100 mm/sec working feed: 1-10 mm/sec return speed: 120 mm/sec table height: 950 mm oil volume: 250 l operating pressure: 265 bar voltage: 380 V total power requirement: 18.5 KW weight of the machine ca.: 12600 kg range L-W-H: 3670 x 1830 x 3130 mm Machine in good / well-maintained condition () Furnishing: - DELEM CNC control - model DA 65 Swivel control panel, front right 2D graphical programming & product display Tool & program library - CNC controlled axes: Y1 + Y2 / X / R / Z1 + Z2 axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - CNC controlled adjustment of the stop fingers (Z axis) - CNC controlled pneumatic table crowning (V axis) - GASPARINI hydraulic upper tool clamping - GASPA ...

pressure: 90,0 t chamfer lenght: 2600 mm distance between columns: 2050 mm column arm: 310 mm ajustment speed: 80,0 mm/sec working feed: 10,0 mm/sec return speed: 80,0 mm/sec back stop - adjustable: ca. 725 mm stroke: 120 mm dayligth: 475 mm table height: 860 mm oil volume: 130 ltr. total power requirement: 11,0 kW weight of the machine ca.: 5500 kg. good condition () Furnishing: - electro-hydraulic CNC press brake - with DELEM CNC control model DA 66W 2D graphical programming automatic bending sequence calculation and collision detection high quality color LCD screen (TFT) - swiveling operation, front left - controlled axes: Y1 + Y2 + X + R + CNC crowning - electric back gauge, on ball screws - with 2x manually adjustable stop fingers - motorized, electric CNC crowning - Upper tool holder system A (Amada), with upper wedge crowning - Lower tool holder Sysetm A (Amada) - LAZER Safe f ...

pressure: 180 t chamfer lenght: 3700 mm distance between columns: 3250 mm throat: 270 mm stroke: 220 mm ajustment speed: 80,0 mm/sec working feed: 10,0 mm/sec return speed: 58,0 mm/sec dayligth: 395 mm table width: 200 mm work height max.: 870 mm oil volume: 210 ltr. total power requirement: 15,0 kW weight of the machine ca.: 12100 kg. range L-W-H: 4200 x 1470 x 2550 mm from a maintenance workshop () Furnishing: - conventional electro-hydraulic press brake with torsion shaft for parallelism of the upper beam - electric back gauge, with ball screws (X axis) with 2x manually adjustable stop fingers Fine adjustment via handwheel at the front, with analogue position display - electro-motor adjustment of the immersion depth (Y1+Y2 axis) with digital position display - swiveling operation, mounting side on the left - 1x set of upper tools / additional divided tools - 1x rotating Multi V u ...

Technical data IFE cascade screens (vibrating waste screens): Manufacturer IFE Aufbereitungstechnik GmbH, Austria Type SM 2400 x 5000 F - UW30 Year of construction 2009 Drive motor 22 kW Rated current 43 A Screen dimensions overall 5,000 x 2,400 mm (l x w) Dimensions of individual sieve segment 950 x 800 x 130 mm (l x w x d) Screen hole grid 150 x 125 mm Length of screen fingers (steel tubes in front of the screen segments) 400 mm Swing width max. 18.5 mm Weight approx. 6,600 kg Possible applications: The waste screen is suitable for use in plants for sorting household waste, commercial and industrial waste, paper and cardboard, scrap metal and electrical waste. Blockage-free screening with the most difficult feed materials, with high throughput capacity, no pigtail formation with oversize particles, loosened oversize particle discharge over the entire screen width and no downtimes for s ...

pressure: 150 t chamfer lenght: 3100 mm distance between columns: 2550 mm column arm: 405 mm table width: 150 mm ajustment speed: 200 mm/sec working feed: 10.0 mm/sec return speed: 120 mm/sec stroke: 215 mm dayligth: 465 mm table height: 960 mm operating pressure: 320 bar oil volume: 200 l voltage: 3x 400 V total power requirement: 15.0 KW weight of the machine ca.: 9500 kg range L-W-H: 3958 x 2350 x 2750 mm maintained condition () Furnishing: - BEYELER electro-hydraulic CNC press brake - CNC control CYBELEC model DNC 800 HP numerical CNC control unit 2D graphical programming & product display Color screen Tool & program library clear and logically structured screen pages Collision display Swivel operation, front right - CNC controlled axes (Y1+Y2-X-R-Z1+Z2) - CNC-controlled back gauge adjustment (X-axis) - CNC-controlled vertical adjustment of the stop beam (R-axis) - CNC-contro ...

sheet width: 3200 mm plate thickness: 4,0 mm distance between columns: 3300 mm daylight opening: OW 400 mm adjustment: UW 80 mm pivoting angle: 180 Grad clamping capacity max.: 200 KN air pressure - required: 4.5 - 6.0 bar total power requirement: 9,8 kW oil volume: 160 l weight: 8500 kg range L-W-H: 4550 x 2530 x 2275 mm well-maintained machine with lots of special accessories () last maintenance/test in JUNE 2023 Furnishing: - CNC screen control CYBELEC model DNC-884-PP32 Swivel control panel, front right - CNC controlled / electro-motorized back gauge pneumatic / lowerable material stop fingers Adjustment speed max. 250 mm/sec. Drive power 0.5 kw Sheet metal support table at the back - motorized lower beam adjustment (S axis) Adjustment range max. 80.0 mm - hydraulic swivel movement of the lower beam - hydraulic movement of the upper beam Adjustment range max. 400 mm Lifting ...

pressure: 100 t chamfer lenght: 2550 mm distance between columns: 2050 mm Control: Delem DA-66T throat: 255 mm ram stroke: 215 mm dayligth: 530 mm rapid traverse - down: 150 mm/sec press speed: 1 - 9,8 mm/sec return speed: 80 mm/sec power capacity: 7,5 kW tank contens: 228 l sound - pressure - turn off level ca. max.: >70 dB connected load: 12 kW weight of the machine ca.: 7 t dimensions of the machine ca.: 2,9 x 1,6 x 2,8 m CE signed: Electric 400 Volt: Foot switch: Light barrier in front: Matrize: Upper tool: crowning system: Mot. back gauge: 580 mm Hydraulic press brake with updated CNC control Delem DA-66T, controlled backgauge in the axes X and R as well as Z manually with 4 stop fingers, hydr. Modufix tool clamping, Lasersafe, Wila crowning, cranked upper tool and matrix single V. X-axis back gauge 580 mm, max. 300 mm/sec, accuracy +/-0.05 mm. R-axis stop vertical 200 mm, 15 ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 29200 € : 592.76 € : 3200 mm : 2 mm : 1.2 mm : 3650 mm : 1700 mm : 1300 mm : 3100 kg NC gesteuerter Hinteranschlag 750 mm ELGO P40T Touchscreen Hinterer Lichtschrankenschutz Vorderere Fingerschutzabdeckung Ausziehbare vordere Auflagekonsole Schnittlinienbeleuchtung Ausrüstung gemäße CE Richtlinien Betriebsanleitung in Deutsch oder Englisch OPTIONEN: Blechhochhaltung, vordere oder hintere Entnahme € 1.900,00 Blechhochhaltung, vordere und hintere Entnahme (NC gesteuert) € 2.840,00 1000 mm Servo-Hinteranschlag € 900,00 Seitenanschlagverlängerung auf 2 m € 410,00 Blechwagen mit Rollen (Kapazität 1.000 kg) € 1.040,00 Winkelanschlag € 460,00 Laser-Schnittlinie € 870,00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 50.0 t chamfer lenght: 1275 mm distance between columns: 1040 mm column arm: 410 mm table width: 100 mm ajustment speed: 200 mm/sec working feed: 1-10 mm/sec return speed: 135 mm/sec stroke: 215 mm tiltable up to: +/- 10 mm table height: 1050 mm dayligth: 385 mm oil volume: 80.0 L travel -x axis: 500 X-Weg mm traversing speed: 300 R-Weg mm compressed air: 6.0 bar Number of working hours: 24.000 h control: DELEM total power requirement: 8.0 KVA weight of the machine ca.: 4750 kg. range L-W-H: 2000 x 2000 x 2380 mm Machine with only approx. 24.000 operating hours () all axes controlled: Y1 + Y2 / X / R / Z1 + Z2 / I axis Furnishing: - DELEM CNC control model DA 65 Swivel control panel, front left 2D graphical programming & product display Tool & program library - CNC controlled axes: Y1 + Y2 / X / R / Z1 + Z2 / I axis - CNC controlled back gauge (X axis) - CNC controlled hei ...