finger used for sale

AUTOMATIC DOVETAILING machine OMEC 750 I second hand machine machine is utilised to indent dovetails for drawers and various furniture elements CE compliant machine: YES machine also for curved pieces instruction and certification booklet: YES tool / cutter: YES volt. 380/50

Pneumatic 2 finger parallel gripper, PGN+ 160-1-SD, Schunk, used tested Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was purchased from a company's spare parts warehouse and is in very good and tested condition. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions apply, see  ...

End mill, shank mill, milling cutter -Six-cutter -Finishing cutter -Diameter: 32 mm -Usable length: 200 mm -Type: HSSE N30 -Quantity: 9 pieces -Sale: only complete set -Weight: 12 kg

Working width from to: 140 mm Working height from to: 20,80 mm : endlos mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 fingers parallel external gripper, pneumatic, 52.81.3.500, FLT, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. 2 Finger Parallel External Gripper, pneumatic, 52.81.3.500 Manufacturer FLT (Fibro Läpple Technologie) Clear width closed 98mm Clear width open 122mm Gripper finger length front 60mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put int ...

2 finger parallel gripper with return spring, PGN+ 160-2-AS-SD, Schunk, used tested Special price If you have a VAT number, we will gladly issue you an invoice without VAT. 2 finger parallel gripper with return spring, external closing, PGN+ 160-2-AS-SD, Schunk, second-hand - the gripper has been tested and is fully functional - one piece is missing a cover plate which will be replaced by us. Used - top condition The part was purchased from a company's spare parts warehouse and is in very good and tested condition. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude w ...

A NEW USED Compact - FLAT - FINGER-JOINTING line Manufacturer: GÖTZINGER Year of construction 2019 Max. 140 mm x 80 mm Min. 20 mm x 30 mm Built up and immediately available Milling, gluing, pressing, capping Sale as inspected without warranty and guarantee Self-dismantling with full assistance For the production of all mouldings inside and outside, floors and much more. All built in a line, about 35 m long. Gluing one-component PU glue waterproof Technical description on request

End mill, shank mill, milling cutter -Four-cutter -Roughing end mill -Diameter: 32 mm -Usable length: 40 mm -Corner radius: 4 mm -Type: HSSE -Quantity: 17 pieces -Sale: only complete set -Weight: 10 kg

Wooden entrance length: min. 130 mm Max. 1000mm Ø370mm Wood cross-section: Min. 20x40mm Max. 80x180mm Wooden output length: Min.3700mm Max.7400mm Tine version vertical/horizontal 10/11 3.8mm pitch PVAC White Glue, 2-sided glue application Connected load 65 kW

Dimensions (L/W/H): 7600x1400x1800 mm Weight: 2950 kg Total power requirement: 9,15 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

End mill, shank mill, milling cutter -Two-knife -Finishing cutter -Diameter: 25 mm -Usable length: 55 mm -Corner radius: 3 mm -carbide-tipped Quantity: 8 pieces -Sale: only complete set -Weight: 4 kg

End mill, shank mill, milling cutter -Two-knife -Finish cutter -Diameter: 32 mm -Usable length: 80 mm -Corner radius: 2 mm -Type: KHSS-E Quantity: 15 pieces -Sale: only complete set -Weight: 11 kg

End mill, shank mill, milling cutter -Six-cutter -Roughing end mill -Various: Diameter -Type: HSS -Quantity: 11 pieces -Sale: only complete set -Weight: 6 kg

Wooden entrance length: min. 130 mm Max. 1000mm Ø370mm Wood cross-section: Min. 20x40mm Max. 80x180mm Wooden output length: Min.3700mm Max.7400mm Tine version vertical/horizontal 10/11 3.8mm pitch PVAC White Glue, 2-sided glue application Connected load 65 kW

Dimensions (L/W/H): 3960x1400x1800 mm Weight: 1200 kg total power requirement: 9,15 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

End mill, shank mill, milling cutter -Four-cutter -Roughing end mill -Diameter: 25 mm -Usable length: 55 mm -Corner radius: 4 mm -Type: STG-160 Quantity: 16 pieces -Sale: only complete set -Weight: 6.5 kg

End mill, shank mill, milling cutter -Four-cutter -Roughing end mill -Diameter: 16 mm -Usable length: 20 mm -Type: HSSE -Quantity: 17 pieces -Sale: only complete set -Weight: 4 kg

End mill, shank mill, milling cutter -Two-knife -Finish cutter -Diameter: 14 mm -Usable length: 30 mm -Corner radius: 0.7 mm -Carbide: equipped -Quantity: 88 pieces Price: per piece -Weight: 8 kg

WEINIG GRECON double-head finger joint line mod. PJ 150/500 - CE - Wood length at the entrance 150 - 700 - Wood width 40 - 150 mm - Wood thickness 18 - 80 mm - Press length 6100 - Pressure force 120 kN - 15Kw cutter motor - 5.5Kw engraver - Year 2004 CE

Dimensions (L/W/H): 6000x1400x1800 mm Weight: 2500 kg total power requirement: 8,05 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x1650x1600 mm Weight: 1300 kg Total power requirement: 17,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Radius cutter, finger cutter, end mill, milling cutter -Six-cutter -Finish cutter -Shaft: Ø 25 mm -Diameter: 32 mm -Usable length: 70 mm -Angle: 60° -Type: HSS -Quantity: 4 pieces -Sale/Price: complete -Weight: 4 kg

Dimensions (L/W/H): 4600x1400x1800 mm Weight: 2200 kg total power requirement: 9,15 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width from to: 80-120 mm Working height from to: 30-80 mm : 1200-1600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Finger end mill, end mill, milling cutter, roughing end mill, cylinder candle cutter -Manufacturer: Master Fraisa, roughing end mills, 3 pieces -Fraisa: 2 pieces Ø 40 mm type 40 0660 TG125 Stg250 -Master: 1 piece Ø 32 mm type 770 CX 120 STG 207 bf -Price/Delivery: complete: only complete -Transport dimensions: 205/110/40 mm -Weight: 3.3 kg

Working width from to: ~ 45 - 95 mm Working height from to: tba mm : 3.000 mm milling height: 130 mm Semi-automatic finger jointing line Sauter type RS for joining wooden workpieces by means of finger joints. The system is suitable for waste wood processing and for the production of extended solid wood lamellas. Including dismantling and loading. Fixed loading date: 15.06.2026. Consisting of: - Milling and gluing machine Sauter type RS-FPEL 130 - Press Sauter type RS-DKPV 6 - End length saw Sauter DAS 500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Total installed power 48.70 kW. - Composition: - Input table with 6 work fields for preparing packages. - Milling unit composed of 3 motorized mats for moving the packages of parts and a main carriage for cross-cutting and gluing. - Diameter of the cutters 250 mm. - Milling unit power 11 kW - 2880 rpm. - Cut-off saw diameter of 250 - 350 mm. - Scoring disc diameter 115 mm. - Pre-pressing and cutting unit. - Final pressing unit. - Minimum dimensions of wooden pieces 150 x 15 x 30 mm. - Maximum dimensions of wooden pieces 1400 x 80 x 150 mm. - Maximum board length 6000 mm. - IMPORTANT: The bag aspirations and suction pipes shown in the photographs are NOT included. - This machine is currently disassembled. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified a ...

Sheet thickness resp. steel/stainless steel/aluminum: 2mm, 1.5mm, 3mm. Auction-ID: A1-48457-190