fine blanking used for sale

weight of the machine ca.:620 kg dimensions of the machine ca.:1000 x 920 x 1550 mm

Make: RIJVA Model: 502/1 S/N: 405 Cap: 12 tons

IBERICA JRK 105 with Blanking year 2000 A DIE-Cutting press of size 75 x 105 cm (29 517 Hours) Including : Stripping and Blanking Station, NON-Stop Feeder, Control and Pull Lay System, Mini. Paper thickness 90 g/m2, Max. Cardboard thickness 1,5 mm, Max. corrugated 3 mm, Chases and Frames, 300 Tons Cutting Pressure, Speed 8 500 S/Hours. In good Condition, Immediately available

CONTROLS   conventional PRESS FORCES   total force (nominal): 110 to SLIDE (MECHAN. PRESS)   slide adjustment: 89 mm   stroke min.: 16 mm   stroke max.: 75 mm   stroke rate (min.): 100 /min   stroke rate (max.): 850 /min TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 375 mm OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 260 mm   sheet thickness max.: 1.5 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 3320 mm   space requirements -front/back-: 2250 mm   total height: 3930 mm   total weight approx.: 24600 kg ATTACHMENTS (PRESSES)   decoiler: yes   strip feeder: yes   feeder type: roll feeder Strip Feed Unit Manufacturer: Bruderer Type: BBV 320/200 Accessories Kohler decoiler 18 260/19-1000.2 (YoM 1987)

CONTROLS   PLC SIEMENS SIMATIC HMI PRESS FORCES   total force (nominal): 250 to PRESS TABLE   table surface (left-right): 1950 mm   table surface (front-back): 1000 mm SLIDE   table surface (left-right): 1950 mm   table surface (front-back): 800 mm   stroke: 30 mm SLIDE (MECHAN. PRESS)   slide adjustment: 100 mm   variable speed: yes   stroke rate (min.): 80 /min   stroke rate (max.): 400 /min   main drive power: 51 kW TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 550 mm STRIP-FEEDER   feeder type: roll feeder DIMENSIONS / WEIGHTS   total weight approx.: 48000 kg ATTACHMENTS (PRESSES)   decoiler: yes   leveller unit: yes   strip feeder: yes Strip Feed Unit Manufacturer: Kohler Maschinenbau Type: KRS 18.260/19-2000.2H-BF1 Serial number: 40 871 Year of manufacture: 2006 Connected load: 15.5 kW Decoiler Manufacturer: Kohler  ...

CONTROLS   electronic controls PRESS DESIGN   number of suspensions: 2   opening in table: yes PRESS FORCES   total force (nominal): 45 to PRESS TABLE   table surface (left-right): 550 mm   table surface (front-back): 450 mm SLIDE   slide force: 45 to   table surface (left-right): 550 mm   table surface (front-back): 360 mm   stroke: 50 mm   stroke rate (max.): 400 /min SLIDE (MECHAN. PRESS)   slide adjustment: 50 mm   stroke min.: 10 mm   stroke max.: 50 mm   stroke rate (min.): 80 /min   stroke rate (max.): 400 /min TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 305 mm Grid 2016 Completely Overhauled

PVS Micro cut model MC 12 Machine for chopping up of various products engine 9 kW of U / min. 3000 funnels state kind 45 Litre of other funnels größen on wunsch and against surcharge

PVS 125 H micro cut Inotec drive power 15 KW product performance from 300 kg to 900 kg an hour for various products pesto sauces soups Majnäse and similar

PVS Micro cut type MC 12 E to chop up and Elmolgieren of various products like ketchup / Majonäse / sauces / soups / mustard engine 9 kW of speed 3000 / U min Tichter 165 litres with Verrohrung and 3 road valves for circulation procedure Anew machine

Internal micrometers, micrometer screw, internal diameter, internal precision measuring device, cylinder gauge, -Measuring range: 35-60mm -Dimensions: 115/450/H60 mm -Weight 1.6kg

Fine filter, filter element, air filter -Manufacturer: Ultrafilter Ecoair OVP -Type: SMF 30/30 -Price: per piece -Quantity: 2 pieces -Dimensions: Ø 86 x 775 mm -Weight: 1.4 kg

Stephan Feinstzerzerer Type: MCH-D 60 Drive: 49 KW performance in the hour depending on the desired fineness of the starting product. From 2000 to 3500 Kg/hour This machine is ready for operation, as from the customer. With used but outdated cutting sets

Cutting sets and moving in snails Suitable for Stephan Machines

Auction-ID: A1-41281-237

Auction-ID: A1-50569-43

Auction-ID: A1-50569-42

Fine rolling mill with 800 mm roll width and 800 mm roll diameter, incl. main drives and auxiliary drives, split adjustment manually. In regularly maintained condition, rollers without riefen. Available for an extra charge: Matching dust filter from Hellmich.

-with 2 flour spreaders -Total length 680cm -with rollers

Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knife: 6 Rotor blade: 9

Fine grinding plant consisting of: Alpine 630 AFG fluidized bed counter-jet mill (V ges: 885 dm3, 10 bar pressure-shock-resistant, saerterrad fold-out), feed station, cyclone, 2 pcs. EX-protection valve, control cabinet and 4 pieces of product buckets. Previous use: Grinding of toner. The system can be inspected in a disassembled condition. Available at an additional cost: Dust filter Bühler PGFG 60/18 (39 m2 filter area).

Fine-sighting system for final finenesses of up to 3 microns, consisting of: product task, Acucut Safe C-24, dust filter Bühler PGFG 60/18 (39 m2 filter area, pressure shock-resistant, without fan), various dust lines and control cabinet. Previous use: toner production (power: 200 - 600 kg/h). Appendix revised in 1993, regularly maintained.

Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knife: 6 Rotor blade: 9

Mikrofinishingmaschine, microfinishing machine, used gebrauchtTyp: MA 3/1000Hersteller: Thielenhaus machine factory WuppertalSteuerung: manually, konv. maximum part size / max. worksize: d = 155 mmMax. 310 part length / max work.length: mmGenauigkeit / precision: 0.001 mmLeistung / load: 12.4 kW, 380/400 ~ specification: stock finish. grinding wheels Floor finishing tools including Machine application: high-precision surface grinding of piston pin

Pastry cutting table Fritsch Euroline - with cutting rollers - with filling station filler - with guillotine - with folding shoes - with humidification station - System is mobile on wheels - Bandwidth

2 cyclones as good as new Type AKA VORTEX Twin TRT 4118 Throughput per twin 95m3/h total 190m3/h Diameter 200mm, cutting cut approx. 50my 1 pcs new cyclone Type AKA Vortex KRS3128 II 40m3/h DM 150 mm All cyclones including overflow line and shut-off valve If required, a refurbished PUMP METSO VASA is also available Drive 30 kW available are also handed in individually

Fine mill / impact disc mill Grinding disk diameter: 800 mm Drive: 90 kW new machine Scope of application: NEUE HERBOLD Impact Disc Mills of the ZM series are fast-running fine mills for pulverizing brittle, medium-hard or impact-resistant materials and granules. Typical application is the fine grinding of H-PVC / PE / PC / etc. Impact Disc Mills from the NEUE HERBOLD process e.g.: - Pipe and profile regrind from extrusion - Pre-shredded panel and edge strip waste - slides - Amorphous and brittle products from the areas of the food industry, the chemistry and pharmacy

Fine smoke system with smoke generator for dosed chip quantity, Timer for smoking processes depending on the desired dryness

MAX CAPASITY 80 T

Fine impact mill B 315 with 15 kW motor, newly mounted

CAPASITY 25/40

Herbold Fine Mill PU 500 Suitable for fine grinding of plastics and soft to medium-hard materials Drive power 55 kW Grinding disc diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

For sale is a pulverizer that was previously used for fine grinding trials in the food sector. The machine is robust, reliable and powerful. Specifications: + Power: 7.5 kw + Processing capacity: 20-50 kg per hour + Weight: 450 kg Using liquid nitrogen, the machine is ready for immediate use. Just plug it in and get started. It is still in mint condition and can be restored by arrangement can be visited. The machine is sold plus 19% sales tax. If you are interested or have any questions, we look forward to hearing from you.

HERBOLD Fine Mill PU800 Suitable for soft to medium-hard materials Previously used for plastic fine grinding Grinding discs diameter 800 mm Drive motor 90 kw

Fine Gauge Indoor Measuring Instrument FEINMESSZEUGFABRIK SUHL 10 - 19 mm 16 mm missing Dimensions: 250 x 180 x 70 mm

I offer here 2 pieces of fine indicator throat gauges from Mahr so-called Marameter F 1 x 25-60 mm 1 x 50 - 100 mm in very good condition immediately ready for use and tested for function the two devices are delivered as shown in the pictures

Fine Gauge Internal Measuring Instrument FEINMESSZEUGFABRIK SUHL 10 - 19 mm Dimensions: 250 x 180 x 70 mm

Iron gauge, trade passometer CARL ZEISS 75 - 100 mm TGL 20250 in wooden box Dimensions: 275 x 170 x 40 mm

Iron gauge, Passameter CARL ZEISS 50 - 75 mm in wooden box Dimensions: 250 x 145 x 40 mm

Iron gauge, trade passometer CARL ZEISS 100 - 125 mm adjuster for tolerance area is missing ! in wooden box Dimensions: 300 x 175 x 40 mm

Iron-on gauge, trade passometer CARL ZEISS 125 - 150 mm in wooden box Dimensions: 330 x 195 x 40 mm

Fine iron indicator, trade passometer FEINMESSZEUGFABRIK SUHL 25 - 50 mm Reading of measuring screw: 0.01 mm Reading dial gauge: 1 μm TGL 20250 in wooden box in wooden box used ! Dimensions: 240 x 115 x 40 mm

Fine Gauge Throat Gauge MAHR 15 - 60 mm in wooden box Dimensions: 140 x 160 x 50 mm

Iron gauge, trade passometer FEINMESSZEUGFABRIK SUHL 125 - 150 mm TGL 20250 in wooden box Dimensions: 360 x 215 x 45 mm

Iron-on precision indicator, passameter with plate FEINMESSZEUGFABRIK SUHL 45 - 70 mm in wooden box Dimensions: 280 x 165 x 45 mm

Iron-on precision indicator, trade passometer FEINMESSZEUGFABRIK SUHL 25 - 50 mm Reading of screw: 0.01 mm Reading dial gauge: 2 μm TGL 20250 in wooden box used, tested ! Dimensions: 240 x 125 x 40 mm

Fine indicator throat gauge MAHR Marameter F 25 - 60 mm Dial gauge holder: Ø 8mm used, tested ! Dimensions: 180 x 80 x 40 mm

Iron-on precision indicator, trade passometer FEINMESSZEUGFABRIK SUHL 25 - 50 mm Reading of screw: 0.01 mm Reading dial gauge: 2 μm TGL 20250 in wooden box used, tested ! Dimensions: 240 x 125 x 40 mm

Fine indicator throat gauge MAHR 50 - 160 mm dial gauge holder: Ø 8mm in wooden box used, tested ! Dimensions: 285 x 185 x 50 mm

Robust smoothing mill with a roll diameter of 1000 mm and a roll width of 800 mm, including drives and auxiliary drives. Current residual sheath thicknesses: 80 mm / 85 mm. Optionally available: 1 set of new roller shells.

Fine boring head, spindle tool, boring head, bridge tool, fine boring headBoring tool, spindle headBoring tool, spindle headBoring rodReceptacle for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731 200Boring head for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-010Boring block for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-500Counterweight for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-600Tool holder: GRAFLEX Holder size G7 = 46 mmProcessing diameter: 200-280 mmAdjustment accuracy: 0.01