fin press line used for sale

A Plasma Finish low-pressure plasma system for surface treatment of workpieces is available. Chamber volume: approx. 15l, internal chamber dimensions X/Y/Z: 250mm/250mm/250mm, plasma frequency: 2.45GHz, plasma type: microwave, power range: 100W-600W, machine dimensions X/Y/Z: approx. 700mm/900mm/1850mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible.

ID3642 Nordberg G11 Fine year/Baujahr 2000 Cone crusher, 160 KW electric motor, with spare cone and casing, with inlet trough Cone crusher, 160 KW electric motor, with spare cone and jacket, with inlet tank

Vibratory Finishing Bowl ROTO-FINISH ST20M4H Capacity: 200 L Bowl dimensions: Ø 1200 mm Inside dimensions: Width 230 mm Useful depth: 250 mm With automatic conveyor exit sBowl reconditioned in 2010 Coating in very good condition (see photos) Electrical panel in very good condition Voltage: 220 V Tri Dimensions (L x W x H): 1500 x 1800 x 1500 mm Weight: approx 1 T

General SKU294W552 LocationBarneveld MakeAmersham TypeFineLine 200 PL No.20003970 Year of construction2005 Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel 1.4404 (316L) Filtercheck Information Mounted on wheelscheck Total height2,50 m Weight80 kg CEcheck Floor space0,60 x 0,60 m ATEX compatiblecheck Extra SpecificationsColumn volume 23 l., allowable pressure 20 bar g, test pressure 28,6 bar g. Inner dia. 200 mm, inner length 700 mm : Miscellaneous filtersAmersham Pharmacia BiotechFilters > Miscellaneous filtersBrand > Amersham Pharmacia Biotech What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more  ...

DMG Mori Seiki LaserTec 50 FineCutting Sauer Laser Machine YOC 2010 Control: Siemens 840 D Power Specifications Max. travel X-axis 540 mm Max. travel Y-axis 500 mm Max. travel Z-axis 700 mm 5-axis laser precision machine for machining diamond tools up to Ø 355 mm and 420 mm in length • Linear actuators in X / Y with an acceleration > 1 g • Highly dynamic torque motors in both rotary axes (B and C axis) • Compact machine design with only 4m² floor space + Keller exhaust air extraction system

00905 Designation of the scissors system Manufacturer: Finnpower Model SG6 12.13 Year of construction 2008 Operating hours: (as of Feb 2026) 42,340 h Power on time 6462131min Running time 2540410min Alarm time 2187771min Control Finnpower ICP1 Machine weight 28,000 kg Punching force 300 kN Cutting force 250 kN Max. operating pressure 300 bar Note: Tapping unit without function The SG6 turbine is currently connected to an LP6 Finnpower plant. The SG6 is converted into a stand-alone machine. So that the SG6 can also work independently on its own. The SG6 scissors are also currently connected to a Night Train storage system together with the LP6. (the LP6 layout and Night Train storage system will be dismantled on March 30, 2026) SG6 12 13 3 x 400 V 50 Hz 3 x 80 A Lcu 25 kA Condition Good condition Dismantling March 30, 2026

This Finn-Power TRS 6 SUV was manufactured in 2003. A robust CNC punching and shearing machine, it features a punching force of 300kN and shearing force of 250kN. It includes a turret with 20 tool positions and a sheet metal storage capable of handling 40 pallets. Ideal for high-quality punching capabilities. Contact us for more information.

This Finn-Power F6-25 5B was manufactured in 1997. A robust CNC punching machine with a machine weight of 14500 kg and a punching force of 300 kN. It operates at a maximum working pressure of 300 BAR. If you are looking to get high quality punching capabilities consider the Finn-Power F6-25 5B machine we have for sale. Contact us for more information.

This 3-axis Finn-Power Shear Genius TRS 6 SBU was manufactured in 1996, featuring a punching force of 300 kN and a sheet working range of 2500 mm × 1250 mm. It supports up to 21 tool stations and can handle sheet thicknesses up to 6 mm. Automatic tool change system enhances productivity. Consider the opportunity to buy this Finn-Power Shear Genius TRS 6 SBU punching and bending machine. Contact us for more information.

Manufacturer: FINSAM Model: BOCK HG22E/160-4 Serial Number: 873833 Year of manufacture: 2012

This 3-axis Finn-Power LPE5 SWUH punch-laser combination was manufactured in 2002. It features a Siemens Sinumerik 840D CNC, a ROFIN-SINAR laser with 2.5 kW power, and a servo-electric punching force of 20 tons. The work surface is 2500×1250 mm, and it includes 20 tool stations with a max tool diameter of 89 mm. Consider the opportunity to buy this Finn-Power LPE5 SWUH punch-laser combination. Contact us for more information about this machine.

This Finn-Power LP6 was manufactured in 2007. A robust punching machine featuring a hydraulic punch with a 30-ton capacity and a turret hosting 20 stations, including two Multi-Tool stations. It has a large working area of 3000x1500mm, ideal for extensive production needs. Consider the Finn-Power LP6 machine we have for sale. Contact us for further details regarding this punching machine.

This 3s Finn-Power C5 + Compact Express CNC punching machine was manufactured in 2007. It features a working area of 2500 × 1250 mm and a punching force of 30 tonnes. With 20 tool stations and a maximum tool diameter of ~89 mm, it offers efficient operation. Consider the opportunity to buy this Finn-Power C5 + Compact Express CNC punching machine. Contact us for further details.

• Year of manufacture: 2020, • Operating hours: about 2,200 h, • Rotor: Diameter 860 mm, Width 830 mm, • Drive: Direct drive via coupling, • Crusher box: 4 impact bars, 2 impact plates, • Rear leg unit (in RS): 2.44 m × 1.2 m (8 × 4) with oversize backfeed, • Task opening: 860 mm × 720 mm, • Transport weight: approx. 30 t, • Application: concrete, asphalt, construction debris and natural stone, Task funnel, • Hopper capacity: 2.6 m³, • Task height: 3.0 m, • Width at the back: 2.0 m, • Sieve area: 1,080 × 810 mm, • Year of construction: 2020, • Operating hours: approx. 2,200 h, • Drive: Direct drive via clutch, • Crusher box: 4 strike bars, 2 impact plates, • Transport weight: approx. 30 t, • Funnel capacity: 2,6 m³, • Task height: 3,0 m, • sieve surface: 1.080 × 810 mm

Manufacturer: Terex Finlay Model: 883 Year of Manufacture: 2010 Machine Type : Mobile heavy duty screener Operating hours: 8867 h Find more here - / Contact us at -

General SKU086W399 MakeFinke GmbH (DE) TypeUnknown Year of constructionUnknown LocationBarneveld Main Features Number of1 heads Specified Features - Liquid filler Fillercheck Number of filling heads:1 Capacity0 till 300 cc Without motorcheck Inlet15mm Mounted on wheelscheck MaterialStainless steel Information With switchcheck Floorspace0.9x0.6 M Total height1.3 MLiquid fillersFinkePackaging machines > Liquid fillersBrand > Finke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Machine Type: Ultrasonic Cleaning Device Make: Finnsonic Type: MC-360/III Year of Make: 2002

Russell Finex 17300 Vibratory sieve Stainless, 500mm diameter mesh, mobile, 3Ph

Russell Finex 17240 Vibratory sieve 2019, Stainless compact vibratory sieve, 500mm mesh diameter, mobile, 3Ph

Finn-Power C5-25 - Sheet metal processing center / nibbler Siemens Sinumerik 840 D CNC control Extensive accessory package with approx. 400 tools Various spare parts included in the scope of delivery incl. enclosure of the system the machine is still in operation approx. 12000 operating hours Year of manufacture 2005 Technical data Capacity: - Max. sheet size (X x Y): 2530 x 1270 mm - Min. sheet size (X x Y): 300 x 100 mm - Max. sheet thickness: 8 mm - Max. sheet weight: 200 kg - X-axis length: 2584 mm (X-42... X2542) - Max. travel speed X-axis: 90 m/min - Y-axis length: 1317 mm (Y-25... Y1292) - Max. travel speed Y-axis: 60 m/min Lifting speeds: - High Light: 3000 rpm - Max. stroke rate (1 mm inseam length): 1100 rpm - Hole to hole (25 mm inseam length): 420 rpm - Distance (250 mm stride length): 150 rpm Punching: - Punching force: 300 kN - Punching stroke ...

Surface grinding machine, grinding machine, surface grinding machine-horizontal, surface grinding machine -Manufacturer: Finke, horizontal surface grinding machine with magnetic plate -Magnetic plate: 550 x 200 mm -Traverse paths: x 500 mm / y 260 mm / z 260 mm -Drive: 1.5 kW -Grinding wheel: Ø max. 200 mm -Dust extraction device -Transport dimensions: 1950/1300/H1590 mm -Total weight: 1108 kg

Contactor, semiconductor contactor, contactor, power contactor, time relay, safety time relay, safety control, motor contactor, auxiliary contactor -Manufacturer: finder, time relay -Type: 82.01 8201 0240 0000 -Quantity: 2 pieces Reiais available -Price: per piece -Dimensions: 85/20/H70 mm -Weight: 0.1 kg/piece

Code: 0350 Brand: FINI Model: KSC 5 - CE Standard Screw air compressor - CE Standard Motor 5,5 Hp Pressure 10 bar Rotational speed 1450 rpm Air flow 450 lt/min Tank capacity 270 lt Overall dimensions: mm 1350 x 600 x 1200 h - 168 kg

JEOL JFC 1100 FINE COAT Ionic Sprayer Untested equipment

Tetra Pak Fino TFA/3 1000ml filling machine, built in 2006, hourly running time approx. 18,000. The Tetra Pak Fino TFA/3 is a filling machine for flexible plastic bags (Fino packs) with a filling volume of 1000 ml.

Panel bender Brand : FinnPower Mod. EB4 - 2150 max length = 2150 mm. Minimum length between folds = 350 mm Max width between folds = 160 mm. Maximum length = 2150 mm. A few new boards are also supplied with the machine

This 11-axis Finn-Power SG6 12.61 was manufactured in 2010. It features a maximum punching force of 300 kN and can handle sheet thicknesses up to 6 mm. The machine includes a thick turret with 20 stations and an integrated CNC right-angle shear for efficient part separation. If you are looking to get high-quality punching capabilities, consider the Finn-Power SG6 12.61 punching and bending machine we have for sale. Contact us for further details.

contact roller: 70 x 50 abrasive belt size: 2000 x 12/50 power capacity: 2,2 kW Overall size: ca. 400 x 1100 x 1250 mm deburring machine / free belt frinding machine abrasive belt with widt from 12-50 mm with vertical working position head inclination up to 45° both ways easy bending of the belt allows to follow the shape cutting speed 24m / sec big tabel surface with ball rolling with self filtering dust extractor system, filtering bag in retardant polyester material for retaining finest dust. Impeller with open blades to prevent clogging. air consumption 700 m³/h comes with a huge bunch of belts! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 47400 € : 905.34 € : 2540 mm : 4.5 mm : Hydraulisch : 135 ° : 3900 mm : 1700 mm : 1900 mm : 5100 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Multifuel 1Wartsila 19.5 MW CHP Power Plant with 2 × 20V34DF (2021) This 19.5 MW multifuel (Gas / HFO / LFO) combined heat and power (CHP) plant is equipped with two Wartsila 20V34DF generating sets and exhaust gas heat recovery boilers. The plant was commissioned at the end of 2022 and has accumulated approximately 20,000 operating hours since new. All operation and maintenance activities have been performed by the Wartsila OEM Service team, ensuring that both the generating sets and auxiliary systems are maintained according to standards and remain in near-new condition. The plant is currently fully operational, available for immediate delivery, and can be load-tested for qualified buyers. The scope of delivery includes complete mechanical equipment capable of producing 19.5 MW of electrical power, 9.0 tons/hour of saturated steam at 10 bar and 8 MW of 90C hot water . In ad ...

- Producer Finnrose - Type Cooling - Year of construction 2001 - Working width 1300 mm - Working height 100 mm - Max. part height 100 mm - Roller diameter 60 mm - Roller pitch 100 mm - Colour 7035 lightgrey - Voltage / HZ 400/50 - Voltage fluctuation max. +/- 5 %

- Producer Finnrose - Type Cooling - Year of construction 2001 - Working width 1.300 mm - Working height ~ 900 + - 20 mm - Max. part height ~ 100 mm - Cooling dryer 2.000 mm - Roller transportsystem - Roller diameter 60 mm - Roller pitch 100 mm - Length conveyor 3.000 mm - Length 3.000 mm - Colour 7035 - Location, in stock - Voltage fluctuation max. +/- 5 % - Without switch cabinet

Mobile gravel processing Classifying Screening Plant Washing Plant Wet & Dry Screening Tracked Mobile Manufacturer: Terex – Finlay Type: Supertruk – 694 + Year of Make: 2019 Betriebst. 956 h Drive: Hybrid, Diesel/Electric 3 screen decks 5 fractions incl. oversize Location: NRW Price negotiation for viewing with test run by arrangement. The information in the offer is non-binding, prior sale is reserved. Dismantling, loading and shipping on request! I am happy to answer any further questions you may have. Goldmann +49 173 6242 600 (also WhatsApp)

Russell Finex 17240 Vibratory sieve 2018, Stainless compact vibratory sieve, 550mm mesh diameter, mobile, 3Ph

Russell Finex 30224 Vibratory separator 2015, stainless, five deck separator, with stainless meshs, 3Ph

: neu : ca. 6 Monate ab Auftragse : Taiwan : 46000 € : 878.6 € : 2540 mm : 3.5 mm : Hydraulisch : 135 ° : 3.7 kW : 3850 mm : 1700 mm : 1860 mm : 3900 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Overview This Tetra Pak Tetra Fino Aseptic filling line, manufactured in 2006, is designed for the filling of UHT milk and other liquid food products in pillow-shaped aseptic cartons (Tetra Fino® 1000 ml format). The system enables aseptic filling of ultra-pasteurized products, allowing extended shelf life without refrigeration. With a capacity of approx. 3,600 packs per hour, the line is suitable for small to medium-capacity dairy production. The line consists of a bag forming and filling machine, conveyor systems, and a carton closing module, with manual packing into boxes. The equipment is currently in production and reported to be in good condition. Technical data Manufacturer: Tetra Pak Machine type: Aseptic carton filling line (pillow pack) Format: Tetra Fino Aseptic 1000 ml Year of manufacture: 2006 Operating hours: approx. 18,625 h Capacity: approx. 3,600 packs/h Filling station ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 50900 € : 962.01 € : 2540 mm : 6.5 mm : Hydraulisch : 135 ° : 3900 mm : 1750 mm : 2050 mm : 6200 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° € 48.300,-- OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm € 11.400,-- (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 56100 € : 1060.29 € : 2540 mm : 3.5 mm : Hydraulisch : 135 ° : 3 kW : 3850 mm : 1700 mm : 1860 mm : 3700 kg NC control for bending angle manual back gauge 600 mm hydraulic driven vertical movement of upper beam segmented blade segmented goose neck rail 30°, 110 mm with quick tool change system one piece flat bottom bar 30 mm according to CE rules (sample photo showing model V-AMH 2535 2 axes NC control) OPTION: 2 axes NC control with touchscreen incl. motorized back gauge 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 42900 € : 819.39 € : 2540 mm : 2.5 mm : Hydraulisch : 135 ° : 3850 mm : 1700 mm : 1800 mm : 3400 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 8310 : prompt, Zwischenverkauf v : Taiwan : 50700 € : 958.23 € : 1 : 2035 mm : 3.5 mm : Hydraulisch : 135 ° : 3000 mm : 1100 mm : 1750 mm : 2200 kg NC control for bending angle manual back gauge 600 mm hydraulic driven vertical movement of upper beam segmented blade segmented goose neck rail 30°, 110 mm with quick tool change system one piece flat bottom bar 30 mm according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 61300 € : 1158.57 € : 4010 mm : 3.5 mm : Hydraulisch : 135 ° : 5600 mm : 1800 mm : 2050 mm : 6100 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 62000 € : 1171.8 € : 3100 mm : 2 mm : Hydraulisch : 135 ° : 5 kW : 4370 mm : 1770 mm : 1790 mm WITH VERTICAL UPPER BEAM MOVEMENT FOR THE USE OF FLAT AND HIGH TOP RAILS hydraulic driven NC control for bending angle manual back gauge 600 mm sharp flat upper rail 45° (in one piece) mechanical crowning adjustment clamping force adjustment upper beam vertical according to CE rules Optionen: sectionet upper rail, height 100 mm motorized back gauge, 800 mm with 2-axis touch control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU212T543 MakeKuehni LocationBarneveld Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell1 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface6.3 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4571 (316Ti) Heat exchangercheck Horizontalcheck Heating surface6.3 m² Tube capacity17,5 Ltr. Number of tubes:1 Tube diameter30 mm Tube length± 13,1 m Wall thickness tubes2 mm Shell capacity41 Ltr. Shell diameter190 mm Shell length2490 mm Wall thickness shell2,6 mm Max. temperature- 200 °C Shell connectionsDN 25, DN 15 Cover connectionsDN 80, DN 40 Information No.227480 Year of construction1990 Floorspace2,6x0,55 m Total height0,35 m Weight160 kgCatalysts & fillersFeed additivesPaper & otherSolvent ...

General SKU041Z170 MakeForplex Chateaubriant TypeFL-4 No.562 Year of constructionunknown LocationBarneveld Main Features Motor75 KW Inlet diameter650 mm Specified Features - Fine Impact Mill MaterialMild steel Fine Impact Mills Grinder(1x) Rotor sizedia. 650mm With grinding trackdia. 665mm With hoppercheck Inlet320x300mm Motor75,0 KW, 400 Volt Information Floorspace1,2x1,3 M Total height1,5 M Weight1900 KGDiscountFine Impact MillsForplexDiscountMills > Fine Impact MillsBrand > Forplex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU160P705 LocationBarneveld MakePallmann TypePP 4 No.0668145 Main Features Motor22.5 KW Inlet diameter155 mm Width100 mm Specified Features - Fine Impact Mill Turbo cone millcheck 2 Driven rotorsimpeller & co-rotating baffle plate Rotor sizeInner roter ø 396 mm: Outer roter 400 mm Grinding room sizeø 600 Inlet155 x 100 mm Motorcheck 15 kW + 7,5 kW, 380 V SpeedMax. 4100 rpm: Grinding disc 1450 rpm Fine Impact Mills MaterialMild steel Information Year of construction1968 With switchgearcheck Floorspace2,1 x 1,1 m Total height0,8 mDiscountFine Impact MillsPallmannDiscountMills > Fine Impact MillsBrand > Pallmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in ...

General SKU212T550 LocationBarneveld MakeKuehni Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell1 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface6.3 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4571 (316Ti) Heat exchangercheck Horizontalcheck Heating surface6.3 m² Tube capacity17,5 Ltr. Number of tubes:1 Tube diameter30 mm Tube length± 13,1 m Wall thickness tubes2 mm Shell capacity41 Ltr. Shell diameter190 mm Shell length2490 mm Wall thickness shell2,6 mm Max. temperature200 °C Shell connectionsDN 25 (2x), DN 15 Cover connectionsDN 80, DN 40 Information No.227480 Year of construction1990 Floorspace2,6x0,55 m Total height0,35 m Weight160 kgCatalysts & fillersF ...

General SKU041Z171 MakeForplex Chateaubriant TypeFL-4 No.561 Year of constructionunknown LocationBarneveld Main Features Motor75 KW Inlet diameter650 mm Specified Features - Fine Impact Mill MaterialMild steel Fine Impact Mills Grinder(1x) Rotor sizedia. 650mm With grinding trackdia. 665mm With hoppercheck Inlet320x300mm Motor75,0 KW, 400 Volt Information Floorspacemill 1,2x1,3 M Total height1,5 M Weight1900 KGDiscountFine Impact MillsForplexDiscountMills > Fine Impact MillsBrand > Forplex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

: neu : ca. 6 Monate ab Auftragse : Taiwan : 45700 € : 872.87 € : 2035 mm : 6.5 mm : Hydraulisch : 135 ° : 3300 mm : 1550 mm : 1900 mm : 3710 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 42600 € : 813.66 € : 2035 mm : 4.5 mm : Hydraulisch : 135 ° : 3300 mm : 1550 mm : 1900 mm : 3200 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.